CMOS-compatible reconstructive spectrometers with self-referencing integrated Fabry-Perot resonators.

Miniaturized reconstructive spectrometers play a pivotal role in on-chip and portable devices, offering high-resolution spectral measurement through precalibrated spectral responses and AI-driven reconstruction. However, two key challenges persist for practical applications: artificial intervention in algorithm parameters and compatibility with complementary metal-oxide-semiconductor (CMOS) manufacturing. We present a cutting-edge miniaturized reconstructive spectrometer that incorporates a self-adaptive algorithm referenced with Fabry-Perot resonators, delivering precise spectral tests across the visible range. The spectrometers are fabricated with CMOS technology at the wafer scale, achieving a resolution of ~2.5 nm, an average wavelength deviation of ~0.27 nm, and a resolution-to-bandwidth ratio of ~0.46%. Our approach provides a path toward versatile and robust reconstructive miniaturized spectrometers and facilitates their commercialization.

Silicon-based transient electronics: principles, devices and applications.

Recent advances in materials science, device designs and advanced fabrication technologies have enabled the rapid development of transient electronics, which represents a class of devices or systems that their functionalities and constitutions can be partially/completely degraded via chemical reaction or physical disintegration over a stable operation. Therefore, numerous potentials, including zero/reduced waste electronics, bioresorbable electronic implants, hardware security, and others, are expected. In particular, transient electronics with biocompatible and bioresorbable properties could completely eliminate the secondary retrieval surgical procedure after their in-body operation, thus offering significant potentials for biomedical applications. In terms of material strategies for the manufacturing of transient electronics, silicon nanomembranes (SiNMs) are of great interest because of their good physical/chemical properties, modest mechanical flexibility (depending on their dimensions), robust and outstanding device performances, and state-of-the-art manufacturing technologies. As a result, continuous efforts have been made to develop silicon-based transient electronics, mainly focusing on designing manufacturing strategies, fabricating various devices with different functionalities, investigating degradation or failure mechanisms, and exploring their applications. In this review, we will summarize the recent progresses of silicon-based transient electronics, with an emphasis on the manufacturing of SiNMs, devices, as well as their applications. After a brief introduction, strategies and basics for utilizing SiNMs for transient electronics will be discussed. Then, various silicon-based transient electronic devices with different functionalities are described. After that, several examples regarding on the applications, with an emphasis on the biomedical engineering, of silicon-based transient electronics are presented. Finally, summary and perspectives on transient electronics are exhibited.

Atomic layer deposition of Al-doped ZnO nanomembrane within situmonitoring.

Due to shortcomings such as poor homogeneity of Al doping, precisely controlling the thickness, inability to conformally deposit on high aspect ratio devices and high pinhole rate, the applications of Al-doped ZnO (AZO) nanomembrane in integrated optoelectronic devices are remarkably influenced. Here, we reportin situmonitoring during the atomic layer deposition (ALD) of AZO nanomembrane by using an integrated spectroscopic ellipsometer. AZO nanomembranes with different compositions were deposited with real-time and precise atomic level monitoring of the deposition process. We specifically investigate the half-reaction and thickness evolution during the ALD processes and the influence of the chamber temperature is also disclosed. Structural characterizations demonstrate that the obtained AZO nanomembranes without any post-treatment are uniform, dense and pinhole-free. The transmittances of the nanomembranes in visible range are >94%, and the optimal conductivity can reach up to 1210 S cm-1. The output of current research may pave the way for AZO nanomembrane to become promising in integrated optoelectronic devices.

Confining Bismuth-Halide Perovskite in Mesochannels of Silica Nanomembranes for Exceptional Photocatalytic Abatement of Air Pollutants.

Spatially confined photocatalysis has emerged as a viable strategy for the intensification of various redox reactions, but the influence of confined structure on reaction behavior is always overlooked in gas-solid reactions. Herein, we report a nanomembrane with confining Cs3 Bi2 Br9 nanocrystals inside vertical channels of porous insulated silica thin sheets (CBB@SBA(⊥)) for photocatalytic nitric oxide (NO) abatement. The ordered one-dimensional (1D) pore channels with mere 70 nm channel length provide a highly accessible confined space for catalytic reactions. A record-breaking NO conversion efficiency of 98.2 % under a weight hourly space velocity (WHSV) of 3.0×106  mL g-1 h-1 , as well as exceptionally high stability over 14 h and durability over a wide humidity range (RH=15-90 %) was realized over SBA(⊥) confined Cs3 Bi2 Br9 , well beyond its nonconfined analogue and the Cs3 Bi2 Br9 confine in Santa Barbara Amorphous (SBA-15). Mechanism studies suggested that the insulated pore channels of SBA(⊥) in CBB@SBA(⊥) endow concentrated electron field and enhanced mass transfer that render high exposure of reactive species and lower reaction barrier needs for ⋅O2 - formation and NO oxidation, as well as prevents structural degradation of Cs3 Bi2 Br9 . This work expands an innovative strategy for designing efficient photocatalysts for air pollution remediation.

Regulating Li-Ion Transport through Ultrathin Molecular Membrane to Enable High-Performance All-Solid-State-Battery.

Solid-state lithium metal batteries with garnet-type electrolyte provide several advantages over conventional lithium-ion batteries, especially for safety and energy density. However, a few grand challenges such as the propagation of Li dendrites, poor interfacial contact between the solid electrolyte and the electrodes, and formation of lithium carbonate during ambient exposure over the solid-state electrolyte prevent the viability of such batteries. Herein, an ultrathin sub-nanometer porous carbon nanomembrane (CNM) is employed on the surface of solid-state electrolyte (SSE) that increases the adhesion of SSE with electrodes, prevents lithium carbonate formation over the surface, regulates the flow of Li-ions, and blocks any electronic leakage. The sub-nanometer scale pores in CNM allow rapid permeation of Li-ions across the electrode-electrolyte interface without the presence of any liquid medium. Additionally, CNM suppresses the propagation of Li dendrites by over sevenfold up to a current density of 0.7 mA cm-2 and enables the cycling of all-solid-state batteries at low stack pressure of 2 MPa using LiFePO4 cathode and Li metal anode. The CNM provides chemical stability to the solid electrolyte for over 4 weeks of ambient exposure with less than a 4% increase in surface impurities.

Collective Coupling of 3D Confined Optical Modes in Monolithic Twin Microtube Cavities Formed by Nanomembrane Origami.

We report the monolithic fabrication of twin microtube cavities by a nanomembrane origami method for achieving collective coupling of 3D confined optical modes. Owing to the well-aligned twin geometries, two sets of 3D confined optical modes in twin microtubes are spectrally and spatially matched, by which both the fundamental and higher-order axial modes are respectively coupled with each other. Multiple groups of the coupling modes provide multiple effective channels for energy exchange between coupled microcavities illustrated by the measured spatial optical field distributions. The spectral anticrossing and changing-over features of each group of coupled modes are revealed in experiments and calculations, indicating the occurrence of strong coupling. In addition, the simulated 3D mode profiles of twin microcavities confirm the collective strong coupling behavior, which shows good agreement with experiments. The collective coupling of 3D confined resonant modes promises broad applications in multichannel optical signal processing, nanophotonics, and 3D non-Hermitian systems.

Nanomaterials as a sustainable choice for treating wastewater.

Wastewater containing toxic substances is a major threat to the health of both aquatic and terrestrial ecosystems. In order to treat wastewater, nanomaterials are currently being studied intensively due to their unprecedented properties. The unique features of nanoparticles are prompting an increasing number of studies into their use in wastewater treatment. Although several studies have been undertaken in recent years, most of them did not focus on some of the nanomaterials that are now often utilized for wastewater treatment. It is essential to investigate the most recent advances in all the types of nanomaterials that are now frequently employed for wastewater treatment. The recent advancements in common nanomaterials used for sustainable wastewater treatment is comprehensively reviewed in this paper. This paper also thoroughly assesses unique features, proper utilization, future prospects, and current limitations of green nanotechnology in wastewater treatment. Zero-valent metal and metal oxide nanoparticles, especially iron oxides were shown to be more effective than traditional carbon nanotubes (CNTs) for recovering heavy metals in wastewater. Iron oxide achieved 75.9% COD (chemical oxygen demand) removal efficiency while titanium oxide (TiO2) achieved 75.5% COD. Iron nanoparticles attained 72.1% methyl blue removal efficiency. However, since only a few types of nanomaterials have been commercialized, it is important to also focus on the economic feasibility of each nanomaterial. This study found that the large surface area, high reactivity, and strong mechanical properties of nanoparticles means they can be considered as a promising option for successful wastewater treatment.

Ultrafast Silicon Nanomembrane Microbolometer for Long-Wavelength Infrared Light Detection.

The microbolometer is the cornerstone device for imaging in the long-wavelength infrared range (LWIR) at room temperature. The state-of-the-art commercial microbolometers usually have a large thermal time constant (TTC) of over 10 ms, limited by their substantial device heat capacity. Moreover, the minimal pixel size of state-of-the-art bolometer is around 10 µm by 10 µm to ensure sufficient power absorption per pixel. Here, we demonstrate an ultrafast silicon nanomembrane microbolometer with a small heat capacity of around 1.9 × 10-11J/K, which allows for its operation at a speed of over 10 kHz, corresponding to a TTC of less than 16 µs. Moreover, a compact diabolo antenna is leveraged for efficient LWIR light absorption, enabling the downscaling of the active area size to 6.2 µm by 6.2 µm. Because of the complementary metal oxide semiconductor (CMOS)-compatible fabrication processes, our demonstration here may lead to a future high-resolution and high-speed LWIR imaging solution.

Creating Ferroic Micropatterns through Geometrical Transformation.

The functionality of a ferroic device is intimately coupled to the configuration of domains, domain boundaries, and the possibility for tailoring them. Exemplified with a ferromagnetic system, we present a novel approach which allows the creation of new, metastable multidomain patterns with tailored wall configurations through a self-assembled geometrical transformation. By preparing a magnetic layer system on a polymeric platform including swelling layer, a repeated self-assembled rolling into a multiwinding tubular structure and unrolling of the functional membrane is obtained. When polarizing the rolled-up 3D structure in a simple homogeneous magnetic field, the imprinted configuration translates into a regularly arranged multidomain configuration once the tubular structure is unwound. The process is linked to the employed magnetic anisotropy with respect to the surface normal, and the geometrical transformation connects the angular with the lateral degrees of freedom. This combination offers unparalleled possibilities for designing new magnetic or other ferroic micropatterns.

Reorganization Energy upon Controlled Intermolecular Charge-Transfer Reactions in Monolithically Integrated Nanodevices.

Intermolecular electron-transfer reactions are key processes in physics, chemistry, and biology. The electron-transfer rates depend primarily on the system reorganization energy, that is, the energetic cost to rearrange each reactant and its surrounding environment when a charge is transferred. Despite the evident impact of electron-transfer reactions on charge-carrier hopping, well-controlled electronic transport measurements using monolithically integrated electrochemical devices have not successfully measured the reorganization energies to this date. Here, it is shown that self-rolling nanomembrane devices with strain-engineered mechanical properties, on-a-chip monolithic integration, and multi-environment operation features can overcome this challenge. The ongoing advances in nanomembrane-origami technology allow to manufacture the nCap, a nanocapacitor platform, to perform molecular-level charge transport characterization. Thereby, employing nCap, the copper-phthalocyanine (CuPc) reorganization energy is probed, ≈0.93 eV, from temperature-dependent measurements of CuPc nanometer-thick films. Supporting the experimental findings, density functional theory calculations provide the atomistic picture of the measured CuPc charge-transfer reaction. The experimental strategy demonstrated here is a consistent route towards determining the reorganization energy of a system formed by molecules monolithically integrated into electrochemical nanodevices.

Optically Stimulated Synaptic Devices Based on the Hybrid Structure of Silicon Nanomembrane and Perovskite.

Optoelectronic synaptic devices have been attracting increasing attention due to their critical role in the development of neuromorphic computing based on optoelectronic integration. Here we start with silicon nanomembrane (Si NM) to fabricate optoelectronic synaptic devices. Organolead halide perovskite (MAPbI3) is exploited to form a hybrid structure with Si NM. We demonstrate that synaptic transistors based on the hybrid structure are very sensitive to optical stimulation with low energy consumption. Synaptic functionalities such as excitatory post-synaptic current (EPSC), paired-pulse facilitation, and transition from short-term memory to long-term memory (LTM) are all successfully mimicked by using these optically stimulated synaptic transistors. The backgate-enabled tunability of the EPSC of these devices further leads to the LTM-based mimicking of visual learning and memory processes under different mood states. This work contributes to the development of Si-based optoelectronic synaptic devices for neuromorphic computing.

Nanomembrane-Based Therapeutic Plasmapheresis after Non-Invasive Ventilation Failure for Treatment of a Patient with Acute Respiratory Distress Syndrome and Myasthenia Gravis: A Case Report.

Acute respiratory distress syndrome (ARDS) is characterized by a widespread inflammation of the lungs, causing severe hypoxemia. Several mediators have been associated with it and almost all of them are small enough to be filtrated through a nanomembrane. We present a case report of a 41-year-old man with myasthenia gravis in remission; he developed ARDS caused by pneumonia. Although he performed well on both non-invasive and invasive mechanical ventilation, his oxygenation continued to deteriorate. As a last resort of treatment, we decided to apply nanomembrane-based apheresis to cleanse his plasma from the harmful inflammatory mediators. After 3 sessions of plasmapheresis, his condition improved and he was successfully weaned from mechanical ventilation. The obtained results gave us ground to assume that the removal of bioactive molecules can be a useful adjunct to protective mechanical ventilation in ARDS.

An in vitro platform for elucidating the molecular genetics of S. aureus invasion of the osteocyte lacuno-canalicular network during chronic osteomyelitis.

Staphylococcus aureus osteomyelitis is a devasting disease that often leads to amputation. Recent findings have shown that S. aureus is capable of invading the osteocyte lacuno-canalicular network (OLCN) of cortical bone during chronic osteomyelitis. Normally a 1 µm non-motile cocci, S. aureus deforms smaller than 0.5 µm in the sub-micron channels of the OLCN. Here we present the µSiM-CA (Microfluidic - Silicon Membrane - Canalicular Array) as an in vitro screening platform for the genetic mechanisms of S. aureus invasion. The µSiM-CA platform features an ultrathin silicon membrane with defined pores that mimic the openings of canaliculi. While we anticipated that S. aureus lacking the accessory gene regulator (agr) quorum-sensing system would not be capable of invading the OLCN, we found no differences in propagation compared to wild type in the µSiM-CA. However the µSiM-CA proved predictive as we also found that the agr mutant strain invaded the OLCN of murine tibiae.

Curved Nanomembrane-Based Concentric Ring Cavities for Supermode Hybridization.

We report the mode interactions and resonant hybridization in nanomembrane-formed concentric dual ring cavities supporting whispering gallery mode resonances. Utilizing a rolled-up nanomembrane with subwavelength thickness as an interlayer, dual concentric microring cavities are formed by coating high-index nanomembranes on the inner and outer surfaces of the rolled-up dielectric nanomembrane. In such a hybrid cavity system, the conventional fundamental mode resonating along a single ring orbit splits into symmetric and antisymmetric modes confined by concentric dual ring orbits. Detuning of the coupled supermodes is realized by spatially resolved measurements along the cavity axial direction. A spectral anticrossing feature is observed as a clear evidence of strong coupling. Upon strong coupling, the resonant orbits of symmetric and antisymmetric modes cross over each other in the form of superwaves oscillating between the concentric rings with opposite phase. Notably, the present system provides high flexibilities in controlling the coupling strength by varying the thickness of the spacer layer and thus enables switching between strong and weak coupling regimes. Our work offers a compact and robust scheme using curved nanomembranes to realize novel cavity mode interactions for both fundamental and applied studies.

Synthesis of Molecular 2D Materials via Low-energy Electron Induced Chemical Reactions.

After the demonstration of a variety of inorganic two-dimensional (2D) materials (graphene, hBN, MoS2, etc.), molecular 2D materials have attracted a significant research interest as well. However, the direct synthesis of these materials is an exceptionally challenging task for chemists. In this review article, a simple and robust physical method for the synthesis of molecular 2D materials is presented based on low-energy electron induced chemical reactions in aromatic molecular layers. In this way, ultrathin (~1 nm) molecular nanosheets with adjustable chemical and physical properties called Carbon Nanomembranes (CNM) can be prepared. Moreover, the method enables the synthesis of various other 2D organic-inorganic hybrids (e.g. MoS2-CNM, graphene-CNM lateral heterostructures, etc.) or ~20 nm thick nanosheets of organic semiconductors. Mechanisms of the reaction and functional properties of these molecular 2D materials including their chemical functionalization and engineering of hybrid hierarchical structures for application in nanoscience and nanotechnology are discussed in this article.

Revealing Large-Scale Homogeneity and Trace Impurity Sensitivity of GaAs Nanoscale Membranes.

III-V nanostructures have the potential to revolutionize optoelectronics and energy harvesting. For this to become a reality, critical issues such as reproducibility and sensitivity to defects should be resolved. By discussing the optical properties of molecular beam epitaxy (MBE) grown GaAs nanomembranes we highlight several features that bring them closer to large scale applications. Uncapped membranes exhibit a very high optical quality, expressed by extremely narrow neutral exciton emission, allowing the resolution of the more complex excitonic structure for the first time. Capping of the membranes with an AlGaAs shell results in a strong increase of emission intensity but also in a shift and broadening of the exciton peak. This is attributed to the existence of impurities in the shell, beyond MBE-grade quality, showing the high sensitivity of these structures to the presence of impurities. Finally, emission properties are identical at the submicron and submillimeter scale, demonstrating the potential of these structures for large scale applications.

Design and commissioning of a multi-mode prototype for thermochemical conversion of human faeces.

This article describes the design and commissioning of a micro-combustor for energy recovery from human faeces, which can operate both in updraft and downdraft modes. Energy recovery from faecal matter via thermochemical conversion has recently been identified as a feasible solution for sanitation problems in low income countries and locations of high income countries where access to sewage infrastructures is difficult or not possible. This technology can be applied to waterless toilets with the additional outcome of generating heat and power that can be used to pre-treat the faeces before their combustion and to ensure that the entire system is self-sustaining. The work presented here is framed within the Nano Membrane Toilet (NMT) project that is being carried out at Cranfield University, as part of the Reinvent the Toilet Challenge of the Bill and Melinda Gates Foundation. For this study, preliminary trials using simulant faeces pellets were first carried out to find out the optimum values for the main operating variables at the scale required by the process, i.e. a fuel flowrate between 0.4 and 1.2 g/min of dry faeces. Parameters such as ignition temperature, residence time, and maximum temperature reached, were determined and used for the final design of the bench-scale combustor prototype. The prototype was successfully commissioned and the first experimental results, using real human faeces, are discussed in the paper.

Faecal-wood biomass co-combustion and ash composition analysis.

Fuel blending is a widely used approach in biomass combustion, particularly for feedstocks with low calorific value and high moisture content. In on-site sanitation technologies, fuel blending is proposed as a pre-treatment requirement to reduce moisture levels and improve the physiochemical properties of raw faeces prior to drying. This study investigates the co-combustion performance of wood dust: raw human faeces blends at varying air-to-fuel ratios in a bench-scale combustor test rig. It concludes with ash composition analyses and discusses their potential application and related problems. The study shows that a 50:50 wood dust (WD): raw human faeces (FC) can reduce moisture levels in raw human faeces by ∼40% prior to drying. The minimum acceptable blend for treating moist faeces without prior drying at a combustion air flow rate of 14-18 L/min is 30:70 WD: FC. For self-sustained ignition and flame propagation, the minimum combustion temperature required for conversion of the fuel to ash is ∼400 °C. The most abundant elements in faecal ash are potassium and calcium, while elements such as nickel, aluminium and iron are in trace quantities. This suggests the potential use of faecal ash as a soil conditioner, but increases the tendency for fly ash formation and sintering problems.

Membrane thinning for efficient CO2 capture.

Enhancing the fluxes in gas separation membranes is required for utilizing the membranes on a mass scale for CO2 capture. Membrane thinning is one of the most promising approaches to achieve high fluxes. In addition, sophisticated molecular transport across membranes can boost gas separation performance. In this review, we attempt to summarize the current state of CO2 separation membranes, especially from the viewpoint of thinning the selective layers and the membrane itself. The gas permeation behavior of membranes with ultimate thicknesses and their future directions are discussed.

Single-Crystalline SrRuO3 Nanomembranes: A Platform for Flexible Oxide Electronics.

The field of oxide electronics has benefited from the wide spectrum of functionalities available to the ABO3 perovskites, and researchers are now employing defect engineering in single crystalline heterostructures to tailor properties. However, bulk oxide single crystals are not conducive to many types of applications, particularly those requiring mechanical flexibility. Here, we demonstrate the realization of an all-oxide, single-crystalline nanomembrane heterostructure. With a surface-to-volume ratio of 2 × 10(7), the nanomembranes are fully flexible and can be readily transferred to other materials for handling purposes or for new materials integration schemes. Using in situ synchrotron X-ray scattering, we find that the nanomembranes can bond to other host substrates near room temperature and demonstrate coupling between surface reactivity and electromechanical properties in ferroelectric nanomembrane systems. The synthesis technique described here represents a significant advancement in materials integration and provides a new platform for the development of flexible oxide electronics.