Stable fixation using absorbable sutures in craniofacial surgery in patients over 24 months of age-a retrospective study.

PURPOSE: In craniofacial surgery, the stable fixation of transposed bone segments is crucial in order to ensure good long-term results. The use of absorbable material in fixation avoids the need for a second surgery, which would otherwise be required to remove osteosynthesis material. The authors of the present manuscript have already demonstrated that absorbable sutures ensure the stable fixation of bone segments in patients up to 24 months of age. However, it has thus far remained unclear whether stable fixation is possible in older patients by using only absorbable sutures due to the slower bone remodelling and prolonged healing time in this cohort. METHOD: For the present study, osteosynthesis was performed in 50 patients ranging from 25.7 to 192.1 months of age (mean, 61.4 ± 21.7 months) using solely absorbable sutures (PDS II®, Ethicon, Germany). Post-operative stability and possible restrictions-such as foreign body reactions-were evaluated within clinical and radiological routine follow-ups. RESULTS: All children demonstrated clinically and radiologically stable osteosynthesis both directly post-operatively and in follow-ups. No significant foreign body reaction could be seen. CONCLUSION: The present study demonstrates-for the first time-that absorbable sutures with a longer absorption period are also very well suited for the fixation of bone segments in patients over 24 months of age. The sole use of absorbable sutures in children over 24 months of age is a safe procedure with nearly no foreign body reactions. The procedure enables stable and highly cost-effective osteosynthesis without altering the osteotomy design.

Risk factors for kyphosis recurrence after implant removal in percutaneous osteosynthesis for post-traumatic thoracolumbar fracture.

PURPOSE: Short-segment minimally invasive percutaneous spinal osteosynthesis has now become one of the treatments of choice to treat thoracolumbar fractures. The question of implant removal once the fracture has healed is still a matter of debate since this procedure can be associated with loss of sagittal correction. Therefore, we analyzed risk factors for kyphosis recurrence after spinal implants removal in patients treated with short-segment minimally invasive percutaneous spinal instrumentation for a thoracolumbar fracture. METHODS: A total of 32 patients who underwent implant removal in percutaneous osteosynthesis for post-traumatic thoracolumbar fracture were enrolled in our study. Patient's medical record, operative report and imaging examinations carried out at the trauma and during the follow-up were analyzed. RESULTS: Every patient experienced fracture union. Vertebral kyphotic angle (VKA) and Cobb angle (CA) improved significantly after stabilization surgery. VKA, CA, upper disk kyphotic angle (UDKA) and lower disk kyphotic angle (LDKA) significantly gradually decreased during follow-up. Traumatic disk injury (p: 0.001), younger age (p: 0.01), canal compromise (p: 0.04) and importance of surgical correction (p < 0.001) were significantly associated with kyphosis recurrence after implant removal. Anterior body augmentation did not affect loss of correction (CA and VKA) during the follow-up period (p: 0.57). CONCLUSION: Despite correction of the fracture after stabilization, we observed a progressive loss of correction over time appearing even before implant removal. Particular attention should be paid to post-traumatic disk damage or canal invasion, to young patients and to surgical overcorrection of the traumatic kyphosis.

Clinical outcome after open-wedge high tibial osteotomy: comparison of double-triangle locking compression plate (DT-LCP) and T-shaped locking compression plate (T-LCP).

BACKGROUND: The objective of this study was to compare the clinical outcomes of two internal fixation methods for high tibial osteotomy (HTO): double-triangle locking compression plate (DT-LCP) and T-shaped locking compression plate (T-LCP). METHODS: 202 adult patients in our hospital between January 2018 and December 2021 were included and followed up for at least one year: group 1(DT-LCP, 98 patients) and group 2 (T-LCP, 104 patients). Detailed information on demographics, preoperative and postoperative follow-up, surgical procedures, and complications were collected. The information of the International Knee Documentation Committee Knee Evaluation Form (IKDC), Knee Injury and Osteoarthritis Outcome Score (KOOS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) were collected before surgery and at the last follow-up. RESULTS: A total of 202 patients were included in the per-protocol analysis. No significant difference was found in terms of demographic data between groups, except for age and BMI. Clinically relevant improvements in knee pain were reached up to last follow-up after the operation in both groups. The mean pain scores (KOOS, WOMAC) at the final follow-up were significantly higher among group 1 compared to group 2 (P = 0.040 and P = 0.023). Furthermore, the DT-LCP internal fixation exerted more excellent effects on other symptoms, function and quality of life than T-LCP internal fixation. CONCLUSIONS: Our study demonstrated that DT-LCP provided better clinical performance due to its implant irritant pain, compared with T-LCP. Thus, DT-LCP is a feasible alternative for the fixation of OW-HTO.

3D printing assisted MIPO for treatment of complex middle-proximal humeral shaft fractures.

BACKGROUND: This study was designed to explore the clinical efficacy of 3-dimensional (3D) printing assisted minimally invasive percutaneous plate osteosynthesis (MIPO) technique by comparing the clinical outcomes with traditional open reduction and internal plating fixation (ORIF) for treating complex middle-proximal humerus fractures (AO 12C fracture type). MATERIALS AND METHODS: The data of 42 participants who received a complicated middle-proximal humerus fracture from the beginning of 2018 to the end of 2022 were retrospectively analyzed. All patients were assigned to two groups: MIPO with detailed preoperative planning assisted by 3D printing technique (MIPO group), and traditional ORIF (ORIF group). RESULTS: This study included 21 patients in the ORIF group and 21 patients in the MIPO group. All patients were followed-up for at least one year (mean: 16.12 ± 4.13 months), and no difference was observed in the range of shoulder joint motion (ROM), Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) scores and Constant scores between the two groups. However, the occurrence of complications (surgical incision site infection, implant loosening, bone nonunion and radial nerve palsy) in ORIF group was remarkably higher compared to the MIPO group. All the cases achieved bone union within the MIPO group. Significant differences were found in surgical time, intraoperative blood loss and fracture healing time between the two groups. CONCLUSION: Preoperative 3D printing assisted MIPO technique exhibits obvious advantages in high operational efficiency and low occurrence of complications, which is worthy of clinical application for treating complex middle-proximal humeral shaft fractures.

Direct C1 posterior arch screws for reduction and osteosynthesis in the treatment of Jefferson fracture.

The surgical treatment of Jefferson fractures generally involves solid fusion, which limits the range of motion of the upper cervical spine. Herein, we present a case of a Jefferson fracture that was surgically treated using direct C1 posterior arch screw reduction and osteosynthesis instead of fusion surgery. Postoperative computed tomography (CT) and plain radiography revealed that both C1 posterior arch screws were well positioned, and placing lag screws at the C1 level played a key role in fracture reduction. The present case highlights a surgical technique, which can preserve neck motion by using lag screws for reduction and osteosynthesis.

Intramedullary nailing of humeral shaft fractures: percutaneous nailing in the lateral position through the Neviaser approach is a reliable technique.

BACKGROUND: Displaced humeral shaft fractures are frequently treated by osteosynthesis in the active patient. We aimed to evaluate the results of intramedullary nailing (IMN) in the lateral position with the Neviaser approach and to compare them with those from IMN nailing in the standard position and conventional approach. METHODS: In the retrospectively evaluated, single-center study, we compared 20 cases of long IMN for fractures of the proximal or middle third of the humerus shaft (Multilock; Synthes Laboratory) in the lateral position with the percutaneous Neviaser approach with 52 cases of IMN in the standard position. The mean age of patients was 62 ± 21 years. Clinical outcomes were analyzed: Constant score, subjective shoulder evaluation score and range of motion. Radiographically, entry point at the proximal part of the humerus, the healing rate and the possible association between the critical shoulder angle (CSA) and the correct positioning of the nail were assessed. RESULTS: With a mean follow-up of 26 ± 2 months, the healing rate was 89% (64/72) in the overall series, (eight patients in non-union), with no difference between the two groups. The overall mean active anterior elevation (AAE) was 125 ± 22°, mean external rotation (ER1) was 35 ± 17°, and mean internal rotation (IR) was at L3. The mean Constant score was 58 ± 23 and subjective shoulder evaluation score 73 ± 12%. ranges of motion were better in the lateral than standard position group (AAE 133 ± 17 vs. 122 ± 23, P = .03; ER1 47 ± 13 vs. 30 ± 16, P < .001; IR T12 vs. L5, P = .02). The nail was less often protruding in the lateral than standard position group (1/20 [5%] vs. 20/52 [38.5%], P = .002). The nail was better positioned from the anteroposterior view (nail centered: 16/20 [75%] vs. 26/52 [50%], P = .047) and lateral view (nail centered: 18/20 [90%] vs. 34/52 [65.4%], P = .02) in the lateral than standard position group. We found no association between nail position, type of approach and CSA. CONCLUSIONS: In the short-term follow-up, osteosynthesis of humeral shaft fractures by using long IMN in the lateral position with the Neviaser approach is a reliable technique. The positioning of the nail, in particular its entry point, and the clinical results were better with the lateral position and Neviaser approach than with the standard position and conventional approach. Further studies with a larger number of patients, assessment of the learning curve, and analysis of the impact of this technique on comorbidities (unchanged cerebral perfusion) are needed to fully validate this technique.

Routine 6-weeks outpatient visit in patients treated surgically for upper extremity fractures: Is it truly necessary?

OBJECTIVES: To investigate the usefulness of the routinely planned six-week outpatient visit and x-ray in patients treated surgically for the most common upper extremity fractures including clavicle, proximal humerus, humeral shaft, olecranon, radial shaft and distal radius. METHOD: This was a retrospective cohort study of all patients treated surgically for the most common upper extremity fractures between 2019 and 2022 in a level 1 trauma center. The first outcome of interest was the incidence of abnormalities found on the x-ray made at the 6-week outpatient visit. Abnormalities were defined as all differences between the intra-operative (or direct postoperative) and 6-week x-ray. In case an abnormality was detected, the hospital records were screened to determine its clinical consequence. The clinical consequences were categorized into requiring either additional diagnostics, additional interventions, change of standard postoperative immobilization, weightbearing or allowed range of motion (ROM). The second outcome of interest was the incidence of deviations from the local standard post operative treatment and follow-up protocol based on the 6-week outpatient visit as a whole. Deviations were also categorized into either requiring additional diagnostics, additional interventions, change of standard postoperative immobilization, weightbearing or allowed range of motion. RESULTS: A total of 267 patients were included. Abnormalities on x-ray at 6 weeks postoperatively were found in only 10 (3.7%) patients of which only 4 (1.5%) had clinical implications (in three patients extra imaging was required and in one patient it was necessary to deviate from standard weightbearing/ROM limitation regime). The clinical/radiological findings during the 6-week outpatient visit led to a deviation from standard in only 8 (3.0%) patients. Notably, the majority of these patients experienced symptoms suggestive for complications. CONCLUSION: The routine 6-week outpatient visit and x-ray, after surgery for common upper extremity fractures, rarely has clinical consequences. It should be questioned whether these routine visits are necessary and whether a more selective approach should be considered. LEVEL OF EVIDENCE: Level IV; Case Series; Prognosis Study.

What's New in Periprosthetic Femur Fractures?

BACKGROUND: Periprosthetic femur fracture (PFF) is one of the most common indications for reoperation following total hip arthroplasty. METHODS/RESULTS: This article provides a review of a symposium on PFF that was presented at the American Association of Hip and Knee Surgeons 2023 annual meeting, including an overview of the Vancouver classification and its implications on treatment and subsequent complications, an updated approach to the management of intraoperative fractures, and finally, contemporary strategies for both osteosynthesis as well as revision arthroplasty for PFFs. CONCLUSION: As the incidence of PPF continues to increase, arthroplasty and trauma surgeons must be prepared to address this challenging complication with a contemporary understanding of the treatment options and their outcomes.

Multiplanar spinopelvic fracture reduction and dual triangular osteosynthesis stabilization for complex multiplanar sacropelvic fractures.

BACKGROUND: Sacropelvic fractures with multidirectional instability require complex reduction and stabilisation techniques. Triangular osteosynthesis reconstruction is an established technique but hardware failure rates remain high and screw trajectories unfamiliar to spine surgeons. Our technique allows de-rotation of the pelvis, fracture reduction in both vertical and transverse planes, immediate weight bearing and is more reproducible for complex spine surgeons. OBJECTIVE: To describe our case series of dual triangular osteosynthesis reduction and stabilisation for complex sacropelvic fractures. METHODS: Retrospective case series of patients treated for unstable multiplanar sacropelvic fractures, at a level one trauma centre in the United Kingdom. Chart review was conducted to assess clinical features, radiology (plain radiographs, CT and MRI), surgical techniques and clinical and radiological outcomes. RESULTS: A total of six patients with four male and two females were included. Mean age of the cohort was 37.5 years (range 19-61 years) and average length of follow-up was 34.5 months (range 13-75 months). Three patients had neurological injury and three were intact. Four patients had associated thoraco-abdominal or lower limb injuries requiring intervention. All patients underwent surgery with reduction and stabilisation using dual triangular osteosynthesis constructs. At final follow-up, one patient had persistent bladder dysfunction (present preoperatively), one remained ASIA A from concomitant cord injury in the thoracic spine, and one patient with L5 and S1 weakness completely recovered. There were no metalwork complications and all patients achieved radiological fusion. CONCLUSION: Our technique of reduction and stabilisation of complex multidirectional sacropelvic fractures leads to a biomechanically strong construct with immediate stability, and without risk of hardware failure.

Long stem revision versus short stem revision with plate osteosynthesis for Vancouver type B2 periprosthetic femoral fracture: a comparative study of eighty five cases.

PURPOSE: Periprosthetic femoral fractures (PPFs) around the hip are challenging complications in orthopaedic surgery, particularly Vancouver type B2 (VTB2) fractures. The surgical management of these fractures is crucial and depends on various factors. Cementless short taper stem with plate osteosynthesis is an alternative surgical technique. This study aims to compare the outcomes of this surgical technique with revision arthroplasty (RA) with long stem in the treatment of VTB2 PPFs. METHODS: This retrospective study was conducted in a single medical institute from February 2010 to May 2019. Patients who had received either total hip arthroplasty or bipolar hemiarthroplasty and subsequently developed a VTB2 PPF were included; patients who sustained intra-operative fractures or received a cemented stem previously were excluded from the analysis. The patients were divided into two groups: group I received RA with cementless long stem, while group II underwent RA with cementless short taper stem with plate osteosynthesis. Demographic data, radiographic and functional outcomes, and complications were analyzed between the two groups. RESULTS: A total of 85 patients diagnosed with VTB2 PPFs were included in the study. There were no significant differences between the two groups in terms of demographic data, including age, gender, mean follow-up times, estimated blood loss, and operative times. The radiographic results showed that there was no significant difference in the incidence of subsidence and implant stability between the two groups. However, group II tended to have less subsidence and periprosthetic osteolysis. Patients in group II had significantly better functional scores (mean Harris hip score: post-operative: 60.2 in group I and 66.7 in group ii; last follow-up: 77.4 in group 1 and 83.2 in group II (both p < 0.05)). There were no significant differences in the overall complication rate, including infection, dislocation, re-fracture, and revision surgery, between the two groups. CONCLUSIONS: Both surgical techniques, cementless long stem and cementless short taper stem with plate osteosynthesis, are effective in the treatment of Vancouver B2 PPFs, with no significant differences in outcomes or complications. However, patients in cementless short taper stem with plate osteosynthesis had better functional scores at both post-operative and the last follow-up.

Valgising angular stable plate fixation in the treatment of multifragmentary proximal humeral fractures in elderly patients.

INTRODUCTION: The frequency of proximal humeral fractures shows an increasing tendency, especially in the elderly, who are frequently affected by osteoporosis. The adequate treatment of complex, displaced fractures poses a serious challenge. Among surgical treatment options, osteosynthesis with an angular stable plate is preferred, however, the implant-related complication rate may be exceptionally high. In our present study, we report the short-term outcomes of our new method of valgising angular stable plate fixation which we use for multifragmentary, displaced proximal humeral fractures in elderly patients. MATERIALS AND METHODS: We retrospectively evaluated the clinical and radiological outcomes of 52 patients (46 female and 6 male, age: 71.9 ± 9.6) who suffered dislocated three- or four-part fractures and underwent valgising angular stable plate fixation. RESULTS: Mean follow-up time was 17.3 months, while the functional outcomes were as following: excellent in 26, good in 18, moderate in 5 and poor in 3 patients. The mean Constant-Murley Score was 82.5 ± 11.2. Functional outcomes only showed significant correlation (p = 0.031) with age and were proven unrelated to fracture type, BMI and known primary diseases. The cumulative complication rate was 9.6% and revision rate was 5.8%. Neurological deficit, pseudoarthrosis or avascular humeral head necrosis did not occur during the follow-up period. CONCLUSIONS: Valgising angular stable plate fixation that we apply for proximal humeral fractures provided favourable functional outcomes and a low postoperative complication rate due to the optimal head and plate placement. The method is especially effective for the treatment of displaced three- and four-part fractures with weakened, osteoporotic bone structure.

Analysis of complications in 97 periprosthetic Vancouver B2 fractures treated either by internal fixation or revision arthroplasty.

INTRODUCTION: The treatment of Vancouver B2 periprosthetic fractures after hip arthroplasty is still a matter of debate. Revision Arthroplasty (RA) was long thought to be the treatment of choice, however several recent papers suggested that Open Reduction and Internal Fixation (ORIF) is a viable option for selected B2 fractures. Complication rates of 14-26% have been reported following surgical treatment of B2 fractures. No significant difference between RA and ORIF in the complication rates nor in the functional outcome was observed. METHOD: We conducted a retrospective analysis of 97 consecutive Vancouver B2 fractures treated according to the algorithm at our institution from 2007 to 2020 and recorded complications and patient specific data. RESULT: From the 97 patient, 45 fractures were treated with RA while 52 fractures were treated with ORIF. Thirteen patients in the RA group had a complication that needed revision (28%) and 11 patients in the ORIF group needed revision (21%). There was no significant difference between complication rates. The reason for failure in the 13 RA patients were infection (n = 4), stem subsidence (n = 1), refracture after a new fall (n = 3), secondary dislocation of the greater trochanter (n = 1) and dislocation (n = 4). The reason for failure in the 11 ORIF patients that were revised were infection (n = 5), persistent symptomatic stem loosening (n = 3) and refracture (n = 3) after a new fall. CONCLUSION: ORIF can be used to revise cemented and non-cemented shafts in more than half of Vancouver B2 fractures with no difference in complication rates when compared to RA. A periprosthetic fracture around the hip has a 21-28% risk of a re-operation after revision surgery with infection and re-fracture after a new fall being the most frequent cause of re-operation.

Motion preservation for open book injuries of the pubic symphysis -a biomechanical cadaver study.

INTRODUCTION: Open book injuries are challenging injuries that oftentimes require surgical treatment. Currently, treatment is performed with symphyseal plating requiring extensive surgery and entirely limiting physiological movement of the symphyseal joint, frequently resulting in implant failure. Therefore, we investigated the biomechanical properties of a minimally invasive tape suture construct (modified SpeedBridge™) as an alternative stabilization technique for the treatment of open book injuries in human cadaver pelvic rings. MATERIALS AND METHODS: The symphysis of 9 human cadaver pelvises was dissected and dilated to 3 cm creating an open book injury. Next, the two osteosynthesis methods (plating, modified SpeedBridge™) were applied. All specimens then underwent cyclic horizontal and vertical loading, simulating biomechanical forces while sitting, standing and walking. For statistical analysis, 3D dislocation (mm) was calculated. RESULTS: Total displacement (mm) of the pubic symphysis displayed the following means and standard deviations: native group 1.34 ± 0.62 mm, open book group 3.01 ± 1.26 mm, tape group 1.94 ± 0.59 mm and plate group 1.37 ± 0.41 mm. Comparison between native and open book (p = 0.029), open book and plate (p = 0.004), open book and tape (p = 0.031), as well as tape and plate group (p = 0.002) showed significant differences. No significant differences were found when comparing the native and tape (p = 0.059), as well as the native and plate (p = 0.999) group. CONCLUSION: While both osteosynthesis techniques sufficiently stabilized the injury, symphyseal plating displayed the highest rigidity. The modified SpeedBridge™ as a tape suture construct provided statistically sufficient biomechanical stability while maintaining symphyseal micro mobility, consequently allowing ligamental healing of the injured joint without iatrogenic arthrodesis.

Louis Dominique le Roy and the first documented and successful crural fracture osteosynthesis, performed in Antwerp in 1796.

METHODS: In 1796 the Antwerp surgeon Louis Dominique Le Roy (1755-1826) performed an osteosynthesis for an open crural fracture, using cerclage of the tibia with a golden thread. The written report, the first ever of such osteosynthesis, is documented by the publication in Dutch, and translated here in English language. RESULTS: The osteosynthesis proved successful. The patient completely healed. CONCLUSION: This is the first successful osteosynthesis and thereby antedates by far the late nineteenth century cerclage operations of long bones.

[Mandibular osteotomy, a simpler and safer method of osteosynthesis]. / Ostéotomie mandibulaire, une méthode plus simple et plus sûre d'ostéosynthèse.

Bilateral sagittal split osteotomy (BSSO) is a surgical procedure to treat mandibular malpositions. However, this surgery is associated with a risk of recurrence. Osteosynthesis techniques may be the cause of early recurrences. This study aims to demonstrate the efficiency and stability of osteosynthesis with two bicortical screws placed with a transjugal approach. We included patients who benefited from a BSSO alone, between May 2020 and August 2021. We performed the osteosynthesis using two bicortical screws placed with a transjugal approach. All the patients underwent lateral X-rays before the surgery, one week after and minimum six months after the intervention. These medical images allowed to study the mandibular movements during the intervention and the osteosynthesis stability. Twenty-five patients benefited from a BSSO alone. Patients obtained a satisfactory occlusal result. The results showed good stability of the two fragments, after surgery, during the studied period (average follow up of 8 months). Two bicortical screws osteosynthesis placed with a transjugal approach is a simple, effective and stable method for osteosynthesis in case of BSSO.

Les ostéotomies sagittales bilatérales mandibulaires (OSBM) sont des procédures chirurgicales utilisées pour traiter les malpositions mandibulaires. Toutefois, cette chirurgie présente un risque de récidive. Les techniques d'ostéosynthèse pourraient être la cause de récidives précoces. Cette étude vise à démontrer l'efficacité et la stabilité de l'ostéosynthèse à l'aide de deux vis bicorticales placées par voie transjugale. Nous avons inclus les patients ayant bénéficié d'une OSBM seule, entre mai 2020 et août 2021. Nous avons réalisé les ostéosynthèses à l'aide de deux vis bicorticales placées par voie transjugale. Tous les patients ont réalisé des clichés radiologiques de profil avant l'intervention, une semaine après et minimum six mois après. Ces imageries ont permis d'étudier les mouvements mandibulaires durant l'intervention et la stabilité de l'ostéosynthèse. Vingt-cinq patients ont bénéficié d'une OSBM seule. Les patients ont obtenu un résultat occlusal satisfaisant. Les résultats ont montré une bonne stabilité des deux fragments après la chirurgie durant la période étudiée (en moyenne, recul de 8 mois). En conclusion, l'ostéosynthèse à l'aide de deux vis placées par voie transjugale est une méthode simple, efficace et stable d'ostéosynthèse d'OSBM.

Open reduction and internal fixation of modified Mason type III/IV radial head fractures with more than three fragments: an analysis of the clinical outcome and reoperation rate.

PURPOSE: It is generally accepted that a radial head fracture (RHF) with more than three parts is not suitable for repair; therefore, most authors suggest straightforward radial head arthroplasty (RHA). With up to 20% risk for reoperation after RHA, improvement in reduction and fixation techniques may represent a valuable alternative before further extending the indications for arthroplasty. To determine the functional results and radiological failure rate after osteosynthesis of multi-fragmentary RHF with more than three articular fragments. We specifically determined (1) the one-year Broberg and Morrey functional elbow score, (2) duration of fracture healing, (3) complication rate, and (4) number of patients converted to RHA. METHODS: This study is a retrospective single-center case series. All patients who underwent primary osteosynthesis for RHF between 2012 and 2019 were included. Nine patients with an average age of 52 years had an average clinical and/or radiological follow-up of 49 months. RESULTS: The preoperative imaging identified nine fractures with four fragments. Three patients underwent osteosynthesis with plates and screws, whereas six patients underwent osteosynthesis with only screws. The mean Broberg and Morrey score was 95 points. Overall, eight of the nine patients had satisfactory results. All patients retained their radial heads and showed radiological fracture healing. Only two patients presented with low-grade complications requiring no further surgery. CONCLUSION: Our study showed that osteosynthesis of RHF with up to four fragments can achieve good functional results with a low complication rate and seems to be a valid alternative to RHA.

Predictive factors for infection after osteosynthesis of tibial plateau fractures: a retrospective study of 314 patients.

INTRODUCTION: The reported incidence of infection related with tibial plateau fractures (IRTPF) ranges from 2 to 23%. This complication can result in catastrophic consequences such as deformity, post-traumatic osteoarthritis, chronic pain, loss of function, and substantial economic burdens on healthcare systems due to extended hospital stays and the resources required for treatment. Consequently, it is imperative to emphasize the identification of infection risk factors. METHODS: A retrospective case-control study was designed, encompassing patients who underwent surgery for tibial plateau fractures between 2015 and 2020. Frequencies and measures of central tendency were compared between infected patients (cases) and non-infected patients (controls) using rank-based statistical tests. Subsequently, two logistic regression models were employed to control for potential confounding variables. RESULTS: A total of 314 patients were included, predominantly male (71.15%). Average age of 44.41 years. IRTPF were observed in 7.64% of the patients. In the univariate inferential statistical analysis, high-energy fractures (OR 6.35, p < 0.001), fractures with compartment syndrome (OR 7.10, p < 0.001), two-stage management with temporary external fixation (OR 8.18, p < 0.001), the use of 2 or more approaches in definitive surgery (OR 2.93, p = 0.011), and the use of two or more plates (OR 9.17, p < 0.001) were identified as risk factors for infection. On average, the duration of surgery in infected patients was 201.2 min, compared to 148.4 min in non-infected patients (p < 0.001). When performing two logistic regression models, the following independent risk factors were identified: high-energy fractures (OR 5.04, p = 0.012), the presence of compartment syndrome (OR 4.53, p = 0.007), and the use of two or more plates in definitive surgery (OR 5.04, p = 0.023). CONCLUSIONS: High-energy tibial plateau fractures (Schatzker IV, V, and VI), the presence of concomitant compartment syndrome, and the use of 2 or more plates in definitive surgery are associated with a higher risk of infection related to fracture following open reduction and osteosynthesis treatment. LEVEL OF EVIDENCE: Case-Control Study.

Novel implant design for comminuted posterior wall acetabular fractures.

BACKGROUND: In recent years, the medical community has witnessed a notable increase in high-energy traumatic injuries, leading to a surge in complex fracture patterns that challenge existing treatment methodologies. Among these, the posterior approach to acetabular fractures stands out for offering direct visualization of the retro-acetabular surface, with current fixation methods relying on 3.5 mm low-profile reconstruction plates and various other implants. Despite the effectiveness of these methods, there is a burgeoning demand for a singular, adaptable implant that not only streamlines the surgical process but also optimizes patient outcomes. METHODS: In an innovative approach to address this need, three-dimensional (3D) models of the posterior acetabular wall were meticulously crafted using AutoCAD® software. The chosen material for the implant was 316L surgical steel for its durability and strength. The design of the implant featured a low-profile mesh structure, which was instrumental in facilitating osteosynthesis. This design allowed for the placement of screws of varying lengths in multiple directions, ensuring the initial reconstruction of the joint in an anatomical position without hindering the placement of the definitive implant. The primary objective was to secure the fixation and stabilization of the fracture by specifically targeting the smaller bone fragments. A comparative analysis was then conducted between this novel plate and a conventional 316L surgical steel, seven-hole, 3.5 mm reconstruction plate through finite element analysis. RESULTS: The comparative analysis unveiled that both plates demonstrated comparable deformation capacities, with no significant differences in load-bearing capabilities observed. This finding suggests that the innovative plate can match the performance of traditional plates used in such surgeries. CONCLUSIONS: The finite element analysis revealed that the newly developed anatomical plate for posterior wall acetabular fractures meets the necessary physical and mechanical criteria for permanent implementation in patients with these fractures. This breakthrough represents a promising advancement that could simplify surgical procedures and potentially elevate patient outcomes. LEVEL OF EVIDENCE II: This study is classified as a Level II, diagnostic study.

Do postoperative outcomes vary between midshaft clavicle fractures of 2, 3, or more than 3 fragments?

OBJECTIVE: This study aims to assess differences in clinical and surgical outcomes associated with the surgical treatment of midshaft clavicle fractures of different complexities based on fragment number. Additionally, the investigation seeks to present the outcomes of a series of patients who underwent surgery at our institution. MATERIALS AND METHODS: A retrospective analysis was conducted on the medical records of patients aged over 18 who underwent midshaft clavicle fracture surgery at our center from November 2009 to May 2021. Patients were categorized based on the number of fracture fragments into groups of two, three, or more than three fragments. Consolidation, implant removal, complications, surgical duration, and functional outcomes (assessed through VAS, ASES, and Constant-Murley scale) were evaluated for each specific group and for the overall cohort. RESULTS: In total, 260 patients were analyzed. There were no significant differences in any of the parameters between the three groups except for surgical time, which was shorter in simple fractures than in those with more than three fragments (68.2 min vs. 75.3 min; p = 0.01). Pseudoarthrosis rate was 2.69%, implant removal rate was 9.61%, and 4.23% of patients presented with complications other than the previous ones. Functional results were excellent, with averages of 97.3 (72.7-100) for the ASES score, 97.5 (75-100) for the Constant score, and 0.6 (0-8) on the VAS. CONCLUSION: According to our results, there were no differences in postoperative results between simple and multifragmentary midshaft clavicle fractures. Patients across all groups reported satisfactory results.

Dynamic hip screw in proximal femoral fractures followed by "single-stage" hip arthroplasty-retrospective analysis.

The aim of this study is to present the results of single-stage total hip arthroplasty (THA) after Dynamic Hip Screw (DHS) failure, or secondary posttraumatic osteoarthrosis. From 2003 to 2020, 15 THAs were performed in group of 15 patients for the treatment of DHS failure, or for late complications following femoral neck and pertrochanteric fractures. The mean follow-up period after arthroplasty was 46.9 months (range 7-139). The patients were evaluated retrospectively-both clinically and radiographically, focussing on the demography, infection rate and other complications (revision surgery), during the year 2023. 9 males and 6 females were included in the study, with a mean age of 56.5 years (range 29-93) at the time of primary osteosynthesis. Each of them had proximal femoral fracture treated primarily with a DHS and then late one-stage revision surgery, with hardware removal and THA implantation. The median time between DHS osteosynthesis and THA was 41.2 months (range 4-114). Four patients (26.6%) had complications after THA, with the need for revision in two cases (13.3%). Dislocation rate was 6.6% (one case), with the need for repeated-revision of THA. The infection rate was 6.6% (one patient) with the need for revision of THA. Peroperative periprosthetic femoral fracture was observed in 13.3% (two patients) without any other problems. Six patients (40%) died during the follow-up period. Single-stage total hip arthroplasty with concomitant hardware removal bears a high- mortality rate, with a higher incidence of postoperative complications compared to elective THA.