RESUMEN
Understanding how Nature accomplishes the reduction of inert nitrogen gas to form metabolically tractable ammonia at ambient temperature and pressure has challenged scientists for more than a century. Such an understanding is a key aspect toward accomplishing the transfer of the genetic determinants of biological nitrogen fixation to crop plants as well as for the development of improved synthetic catalysts based on the biological mechanism. Over the past 30 years, the free-living nitrogen-fixing bacterium Azotobacter vinelandii emerged as a preferred model organism for mechanistic, structural, genetic, and physiological studies aimed at understanding biological nitrogen fixation. This review provides a contemporary overview of these studies and places them within the context of their historical development.
Asunto(s)
Azotobacter vinelandii , Fijación del Nitrógeno , Azotobacter vinelandii/genética , Azotobacter vinelandii/metabolismo , Nitrogenasa/química , Nitrogenasa/genética , Nitrogenasa/metabolismo , Amoníaco , NitrógenoRESUMEN
The COVID-19 pandemic has transformed our understanding of aerosol transmissible disease and the measures required to minimise transmission. Anaesthesia providers are often in close proximity to patients and other hospital staff for prolonged periods while working in operating and procedure rooms. Although enhanced ventilation provides some protection from aerosol transmissible disease in these work areas, close proximity and long duration of exposure have the opposite effect. Surgical masks provide only minimal additional protection. Surgical patients are also at risk from viral and bacterial aerosols. Despite having recently experienced the most significant pandemic in 100 yr, we continue to lack adequate understanding of the true risks encountered from aerosol transmissible diseases in the operating room, and the best course of action to protect patients and healthcare workers from them in the future. Nevertheless, hospitals can take specific actions now by providing respirators for routine use, encouraging staff to utilise respirators routinely, establishing triggers for situations that require respirator use, educating staff concerning the prevention of aerosol transmissible diseases, and providing portable air purifiers for perioperative spaces with low levels of ventilation.
Asunto(s)
Aerosoles , COVID-19 , Quirófanos , Humanos , COVID-19/prevención & control , COVID-19/transmisión , Control de Infecciones/métodos , Exposición Profesional/prevención & control , Microbiología del Aire , Transmisión de Enfermedad Infecciosa de Paciente a Profesional/prevención & control , Dispositivos de Protección Respiratoria , Ventilación/métodos , MáscarasRESUMEN
N95 respirators are the core equipment used by healthcare workers to prevent the spread of respiratory diseases. The protective effect of N95 against infection spread depends on the fit of the N95 to the wearer, which is related to the wearer's facial dimensions. The purpose of this cross-sectional study was to assess the relationship between the fit of three types of N95 and facial dimensions. A total of 305 healthcare workers from ten hospitals in Beijing were recruited for this study. Facial dimensions of workers were measured using Intel RealSense Depth Camera D435. Fit testing was conducted on three types of N95 using the TSI-8038 Porta Count Pro + Respirator Fit Tester. Possible associations between the fit test results and facial dimension data were examined. A Porta Count reading of 100 was used as the criterion for an acceptable fit. The fit of the folding respirators was positively correlated with nose length (r = 0.13, p = 0.02), nose height (r = 0.14, p = 0.02), and face width (r = 0.12, p = 0.03), whereas that of flat respirators was correlated with nose width (r = 0.16, p < 0.01), chin length (r = 0.18, p < 0.01), and pro-face width (r = 0.13, p = 0.02), and that of arched respirators was correlated with the nose length (r = 0.13, p = 0.03). The fit of N95 for wearers depends on their facial features. The results of this study can provide advice for medical workers to choose the appropriate N95. Medical staff should fully consider their facial dimensions when choosing an appropriate N95 to improve the protective efficacy of respirators and to reduce the risk of infection by respiratory diseases.
Asunto(s)
Cara , Respiradores N95 , Humanos , Cara/anatomía & histología , Adulto , Masculino , Estudios Transversales , Femenino , Persona de Mediana Edad , Personal de Salud , Diseño de Equipo , Beijing , Dispositivos de Protección Respiratoria/normas , Exposición Profesional/prevención & controlRESUMEN
This study compared the effectiveness of N95 FFRs in providing respiratory protection for healthcare staff in a residential aged care facility (RACF) and tertiary teaching hospital (TTH) who had previously passed their occupational respiratory protection program fit test. A total of 126 healthcare workers who were regularly using N95 FFRs and who had previously passed a fit test participated in this comparative study. In this study, participants were again fit tested with the PortaCount machine, and their self-assessed tolerability of wearing an N95 FFR was assessed using a standardized questionnaire. The main outcome measures included the pass rate of the fit test and the assessment of tolerability and comfort of the N95 FFR. Across all participants, the fit test pass rate was low (27%), indicating persistent gaps in respiratory protection programs for healthcare workers during the ongoing COVID-19 pandemic. Hospital workers were 3.7 times more likely to pass the test compared to their counterparts in RACFs (p < 0.001). It was also found that workers in RACFs reported higher levels of discomfort and overall dissatisfaction with N95 FFRs compared to hospital staff. These findings highlight the need for targeted interventions and improvements in respiratory protection practices beyond annual fit testing, particularly in RACFs, to ensure the safety of healthcare workers and the vulnerable population they serve.
Asunto(s)
COVID-19 , Personal de Salud , Respiradores N95 , Exposición Profesional , Centros de Atención Terciaria , Humanos , COVID-19/prevención & control , Masculino , Femenino , Exposición Profesional/prevención & control , Adulto , Persona de Mediana Edad , SARS-CoV-2 , Hogares para Ancianos , Sistemas de Atención de PuntoRESUMEN
AIM/OBJECTIVES: Fit testing of N95/FFP2 respirators is universally recommended before exposure to airborne infectious diseases such as COVID-19. Respirator supply shortage in the COVID-19 pandemic encouraged extended-use for up to 4 h, despite uncertainty about seal integrity over time. The aim of our study was to assess N95 seal integrity after at least 2 h of continuous clinical use in the intensive care unit (ICU). We hypothesised that seal integrity would deteriorate over time, with variability between respirator shapes. METHODS: A prospective cohort study of healthcare workers in a metropolitan ICU setting in Australia between April 2021 and August 2022. Following consent and screening, participants underwent qualitative fit testing in the ICU, and fit tests were repeated following a continuous period of at least 2-h usage. The primary outcome was N95 fit-test failure rate measured by qualitative fit testing of >2 h compared to baseline. Secondary outcomes evaluated effects of respirator shape, demographic characteristics, and duration of respirator use on respirator fit after 2 h use. RESULTS: Fifty-one participants were recruited and consented. Six participants were excluded; four failed baseline fit test, one could not taste saccharin, and one did not complete 2 h of usage. Fourteen of 45 participants (â¼31%) failed the extended-use fit test (median duration: 2 h 10 min [interquartile range: 2:07-2:20]). Fit-test rates differed between respirator shapes; three-piece flat-fold respirators had lower failure rates (6/32; 19%) than duckbill-shaped respirators (6/11; 55%) p = 0.046. No other demographic characteristic or respirator shape was significantly associated with increased failure rate. CONCLUSIONS: Following 2 h of use, approximately 30% of participants failed repeat fit testing, suggesting incomplete respiratory protection. Three-piece flat-fold respirators outperformed duckbill respirators. Extended use of respirators, even without respirator reuse, may put healthcare workers at risk of inadequate respiratory protection, in particular when using duckbill-shaped respirators.
RESUMEN
Respiratory aerosols with diameters smaller than 100µm have been confirmed as important vectors for the spread of diseases such as SARS-CoV-2. While disposable and cloth masks afford some protection, they are typically inefficient at filtering these aerosols and require specialized fabrication devices to produce. We describe a fabrication technique that makes use of a folding procedure (origami) to transform any filtration material into a mask. These origami masks can be fabricated by non-experts at minimal cost and effort, provide adequate filtration efficiencies, and are easily scaled to different facial sizes. Using a mannequin fit test simulator, we demonstrate that these masks can provide filtration efficiencies of over 90% while simultaneously providing greater comfort as demonstrated by pressure drops of <20 Pa. We also quantify mask leakage by measuring the variations in filtration efficiency and pressure drop when masks are sealed to the mannequin face compared to when the mask is unsealed but positioned to achieve the best fit. While leakage generally trended with pressure drop, some of the best performing mask media achieved <10% reduction in filtration efficiency due to leakage. Because this mask can provide high filtration efficiencies at low pressure drop compared to commercial alternatives, it is likely to promote greater mask wearing tolerance and acceptance.
Asunto(s)
COVID-19 , Humanos , COVID-19/prevención & control , Filtración , Aerosoles y Gotitas Respiratorias , SARS-CoV-2 , Textiles , MáscarasRESUMEN
INTRODUCTION AND METHODS: In this study, we evaluated self-reported respiratory symptoms during agricultural work, respiratory protection use and experience, and perceived value of receiving respirators using Gear Up for Ag Health and Safety Program™ pre- and post-surveys from 703 to 212 young adult hog producers in the United States. To our knowledge, this is one of the most extensive survey data sets on self-reported respiratory symptoms and respiratory protection behaviors of collegiate-aged young adults working in US livestock production. RESULTS: About one-third (37%) of young adult hog producers stated that they have experienced cough, shortness of breath, fever, and chills after working in dusty areas on the farm. Most (76.2%) stated that they were already "always" or "sometimes" wearing filtering facepiece (N95-style) respirators, even before participating in an outreach program. About one-third (30%) reported experience wearing a cartridge-style respirator but only 5% reported having been fit-tested for a respirator. Young adult male producers were significantly more likely to report use of both respirator types when compared to females, both before and after the program. Male producers were also more likely than females to engage in high-risk farm tasks where respirators are recommended, such as cleaning out grain bins and mixing or grinding feed. Following an educational program, males and females reported using the respirators that they received at similar rates, and 20% of overall participants purchased additional respiratory protection. DISCUSSION: The study found that young adult hog producers in postsecondary education are already wearing respirators with some frequency and at rates higher than previously reported by agricultural workers. More research is needed to make effective task-based respirator-use recommendations and investigate some significant gender differences among young adult hog producers observed in this study.
Asunto(s)
Exposición Profesional , Dispositivos de Protección Respiratoria , Femenino , Humanos , Masculino , Adulto Joven , Estados Unidos , Porcinos , Anciano , Exposición Profesional/prevención & control , Autoinforme , Agricultura , Encuestas y Cuestionarios , AnimalesRESUMEN
The assigned protection factor (APF) for quarter-facepiece respirators is currently 5, based on fit test data from the 1970s with models no longer commercially available. The goal of this project was to evaluate the respirator fit capability of a NIOSH-approved N95 quarter-facepiece elastomeric respirator with a gel-based facial seal design (Envo Mask by Sleepnet Corporation). Human subjects were recruited from healthcare and the general population to satisfy a 25-member NIOSH bivariate panel. Subjects were fit tested with a fast fit protocol using a TSI Portacount Model 8038 in the N95 mode. Second-by-second measures of fit were then collected while subjects performed a 30-min series of simulated healthcare activities. Subjects completed a short comfort questionnaire. The median (5th, 95th percentile) fit factor was 188 (48, 201). Simulated workplace protection factors (SWPFs) had a median (5th, 95th percentile) of 181 (94, 199) (data truncated at 200) and 570 (153, 1508) (non-truncated data). Subjects ranked inhalation and exhalation as "easy" with average scores of 5.0/6.0 and 5.2/6.0, respectively. The facepiece was ranked between slightly comfortable and comfortable (4.8/6.0) and the harness as comfortable (5.0/6.0). Most users agreed (5.2/6.0) that the mask was stable on their faces. The 5th percentile SWPF of 95 supports an APF of at least 10 for this quarter-facepiece elastomeric respirator, similar to the APF for half-facepiece respirators. This study supports increasing the APF for quarter-facepiece respirators, a class that has been largely ignored by manufacturers for the past 40 years. A lightweight, low profile, reusable quarter-facepiece respirator is an effective option for healthcare and other worker protection during a pandemic and similar situations.
Asunto(s)
Exposición Profesional , Dispositivos de Protección Respiratoria , Humanos , Exposición Profesional/prevención & control , Lugar de Trabajo , Respiradores N95 , Ventiladores MecánicosRESUMEN
Correctly fitting N95 filtering facepiece respirators (FFRs) have become increasingly important in health care throughout the COVID-19 pandemic. We evaluated the hypothesis that personalized 3D-printed frames could improve N95 FFRs quantitative fit test pass rates and test scores in health care workers (HCWs). HCWs were recruited at a tertiary hospital in Adelaide, Australia (ACTRN 12622000388718). A mobile iPhone camera + app was used to produce 3D scans of volunteers' faces, which were then imported into a software program to produce personalized virtual scaffolds suited to each user's face and their unique anatomical features. These virtual scaffolds were printed on a commercially available 3D printer, producing plastic (and then silicone-coated, biocompatible) frames that can be fitted inside existing hospital supply N95 FFR. The primary endpoint was improved pass rates on quantitative fit testing, comparing participants wearing an N95 FFR alone (control 1) with participants wearing the frame + N95 FFR (intervention 1). The secondary endpoint was the fit factor (FF) in these groups, and R-COMFI respirator comfort and tolerability survey scores. N = 66 HCWs were recruited. The use of intervention 1 increased overall fit test pass rates to 62/66 (93.8%), compared to 27/66 (40.9%) for controls. (OR for pFF pass 20.89 (95%CI: 6.77, 64.48, p < 0.001.) Average FF increased, with the use of intervention 1-179.0 (95%CI: 164.3,193.7), compared to 85.2 (95%CI: 70.4,100.0) with control 1. Pass rates and FF were improved with intervention 1 compared to control 1 for all stages of the fit-test: bending, talking, side-to-side, and up-down motion. (p < 0.001 all stages). Tolerability and comfort of the frame were evaluated with the validated R-COMFI respirator comfort score, showing improvement with the frame compared to N95 FFR alone (p = 0.006). Personalized 3D-printed face frames decrease leakage, improve fit testing pass rates and FF, and provide improved comfort compared to the N95 FFR alone. Personalized 3D-printed face frames represent a rapidly scalable new technology to decrease FFR leakage in HCW and potentially the wider population.
Asunto(s)
COVID-19 , Exposición Profesional , Dispositivos de Protección Respiratoria , Humanos , Respiradores N95 , Pandemias , Estudios Cruzados , Estudios Prospectivos , Exposición Profesional/prevención & control , COVID-19/prevención & control , Diseño de Equipo , Impresión TridimensionalRESUMEN
Both respirators and surgical masks (SM) are used as source control devices. During the COVID-19 pandemic, there was much interest in understanding the extent of particle total outward leakage (TOL) from these devices. The objective of this study was to quantify the TOL for five categories of devices: SMs, National Institute for Occupational Safety and Health (NIOSH) Approved N95 filtering facepiece respirators (FFRs) without exhalation valves, NIOSH Approved N95 FFRs with exhalation valves (N95 FFRV), NIOSH Approved elastomeric half-mask respirators (EHMRs) with exhalation valves, and NIOSH Approved EHMRs with an SM covering the exhalation valve (EHMRSM). A benchtop test system was designed to test two models of each device category. Each device was mounted on a headform at three faceseal levels (0% faceseal, 50% faceseal, and 100% faceseal). At each faceseal level, the TOL was assessed at three flow rates of minute ventilations of 17, 28, and 39 L/min. The experimental design was a split-split-plot configuration. Device type, faceseal level, flow rate, and the interaction of device type and faceseal level were found to have a significant effect (p-value < 0.05) on the TOL. This study found that the N95 FFRs without exhalation valves had the lowest mean TOL. The SMs had about three times higher TOL than the N95 FFRs without exhalation valves. The TOL of the N95 FFRV was comparable to that of the SM at 0% and 50% faceseal on average overall conditions, but the N95 FFRV had a significantly higher TOL than the SM at a 100% faceseal. The EHMRs had the highest TOL because of the exhalation valve. Using an SM to cover the exhalation valve did not improve the EHMRs' efficiency in mitigating the TOL. Caution should be exercised when using N95 FFRVs as a source control measure against respiratory activities with heavy work rates, such as performing CPR. Results of this study showed that reduced faceseal leakage for N95 FFRs and SMs improves source control.
Asunto(s)
Exposición Profesional , Dispositivos de Protección Respiratoria , Estados Unidos , Humanos , Exposición Profesional/prevención & control , Máscaras , Pandemias , Ventiladores Mecánicos , FiltraciónRESUMEN
Loose-fitting powered air-purifying respirators (LF-PAPRs) are increasingly used in hospitals and coal mines because of their high comfort and protection level, but the utilization faces the challenges of 8-hr continuous high protection requirements in the hospital environment and the coupling effects of high temperature, high humidity, high dust concentration in coal mines. Based on the self-developed powered air-purifying respirator simulation test system, this study explores the 8-hr changes of supplied airflow, the relative air pressure inside the inlet covering (ΔP), and total inward leakage (TIL) of four models of LF-PAPRs in simulated hospital and coal mine environments. Results show that: (1) In a simulated hospital environment, all four LF-PAPRs showed filter cartridge blockage within 5 â¼ 6 hr of continuous operation; while in the simulated coal mine, three models of LF-PAPRs showed filter cartridge blockage within 3 hr. (2) In both the hospital and coal mine environments, there are cases where the supplied airflow of LF-PAPRs dropped below 170 L/min within 3 hr. (3) In a simulated hospital environment, the ΔP of all LF-PAPRs maintained positive within 5-6 hr; while in the simulated coal mine, the ΔP of two LF-PAPRs, respectively, appeared negative after 1 hr and 1.6 hr operation. (4) The maximum TIL of the tested LF-PAPRs, respectively ranged from 0.5-0.9% and 1.4-3% in simulated hospital and coal mine environments. (5) In both hospital and coal mine environments, the supplied airflow and ΔP of each LF-PAPR showed a decreasing trend with increasing test duration, while the TIL significantly increased with testing time. (6) The supplied airflow, ΔP, and TIL of each LF-PAPR in the simulated hospital environment performed better than those in the coal mine. This study evaluated the performance of PAPR under the most severe operating conditions, and respirator performance may differ under in-situ conditions.
Asunto(s)
Contaminantes Ocupacionales del Aire , Exposición Profesional , Dispositivos de Protección Respiratoria , Contaminantes Ocupacionales del Aire/análisis , Exposición Profesional/prevención & control , Exposición Profesional/análisis , Aerosoles/análisis , Hospitales , Carbón MineralRESUMEN
OBJECTIVE: The objective of this study was to evaluate the adequacy of the user seal check (USC) in predicting N95 respirator fit. DESIGN: This was a prospective, observational study conducted from May to September 2020. SETTING: The study setting included three private intensive care units (ICUs) in Victoria, Australia. PARTICIPANTS: ICU staff members in three private ICUs in Melbourne and regional Victoria participated in this study. MAIN OUTCOME MEASURES: The main outcome measure is the proportion of participants who passed a USC and subsequently failed fit testing of an N95 respirator. INTERVENTION: Three different respirators were available: two N95 respirator brands and CleanSpace HALO® powered air-purifying respirator. Participants were sequentially tested on N95 respirators followed by powered air-purifying respirators until either successful fit testing or failure of all three respirators. The first N95 tested was based on the availability on the day of testing. The primary outcome was failure rate of fit testing on the first N95 respirator type passing a USC. RESULTS: Of 189 participants, 22 failed USC on both respirators, leaving 167 available for the primary outcome. Fifty-one of 167 (30.5%, 95% confidence interval = 23.7-38.1) failed fit testing on the first respirator type used that had passed a USC. CONCLUSION: USC alone was inadequate in assessing N95 respirator fit and failed to detect inadequate fit in 30% of participants. Mandatory fit testing is essential to ensure adequate respiratory protection against COVID-19 and other airborne pathogens. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry: ACTRN12620001193965.
Asunto(s)
COVID-19 , Exposición Profesional , Humanos , Respiradores N95 , Estudios Prospectivos , Exposición Profesional/prevención & control , Diseño de Equipo , COVID-19/prevención & control , VictoriaRESUMEN
Cases of coronavirus disease 2019 (COVID-19) have been reported in more than 200 countries. Thousands of health workers have been infected, and outbreaks have occurred in hospitals, aged care facilities, and prisons. The World Health Organization (WHO) has issued guidelines for contact and droplet precautions for healthcare workers caring for suspected COVID-19 patients, whereas the US Centers for Disease Control and Prevention (CDC) has initially recommended airborne precautions. The 1- to 2-meter (≈3-6 feet) rule of spatial separation is central to droplet precautions and assumes that large droplets do not travel further than 2 meters (≈6 feet). We aimed to review the evidence for horizontal distance traveled by droplets and the guidelines issued by the WHO, CDC, and European Centre for Disease Prevention and Control on respiratory protection for COVID-19. We found that the evidence base for current guidelines is sparse, and the available data do not support the 1- to 2-meter (≈3-6 feet) rule of spatial separation. Of 10 studies on horizontal droplet distance, 8 showed droplets travel more than 2 meters (≈6 feet), in some cases up to 8 meters (≈26 feet). Several studies of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) support aerosol transmission, and 1 study documented virus at a distance of 4 meters (≈13 feet) from the patient. Moreover, evidence suggests that infections cannot neatly be separated into the dichotomy of droplet versus airborne transmission routes. Available studies also show that SARS-CoV-2 can be detected in the air, and remain viable 3 hours after aerosolization. The weight of combined evidence supports airborne precautions for the occupational health and safety of health workers treating patients with COVID-19.
Asunto(s)
COVID-19 , Aerosoles , Anciano , Personal de Salud , Humanos , Control de Infecciones , SARS-CoV-2RESUMEN
The particle filtration efficiency (PFE) of a respirator or face mask is one of its key properties. While the physics of particle filtration results in the PFE being size-dependent, measurement standards are specified using a single, integrated PFE, for simplicity. This integrated PFE is commonly defined concerning either the number (NPFE) or mass (MPFE) distribution of particles as a function of size. This relationship is non-trivial; it is influenced by both the shape of the particle distribution and the fact that multiple practical definitions of particle size are used. This manuscript discusses the relationship between NPFE and MPFE in detail, providing a guide to practitioners. Our discussion begins with a description of the theory underlying different variants of PFE. We then present experimental results for a database of size-resolved PFE (SPFE) measurements for several thousand candidate respirators and filter media, including filter media with systematically varied properties and commercial samples that span 20%-99.8% MPFE. The observed relationships between NPFE and MPFE are discussed in terms of the most-penetrating particle size (MPPS) and charge state of the media. For the sodium chloride particles used here, we observed that the MPFE was greater than NPFE for charged materials and vice versa for uncharged materials. This relationship is observed because a shift from NPFE to MPFE weights the distribution toward larger sizes, while charged materials shift the MPPS to smaller sizes. Results are validated by comparing the output of a pair of automated filter testers, which are used in gauging standards compliance, to that of MPFE computed from a system capable of measuring SPFE over the 20 nm-500 nm range.
RESUMEN
During 2001-2002, the National Institute for Occupational Safety and Health (NIOSH), at the United States Centers for Disease Control and Prevention, collaborated with the Bureau of Labor Statistics (BLS) at the United States Department of Labor to conduct a voluntary survey of U.S. employers regarding the use of respiratory protective devices. In 2003, the survey results were jointly published by NIOSH and BLS. This study highlights and evaluates the scientific impact of the 2001-2002 survey by using the Science Impact Framework which provides a historical tracking method with five domains of influence. The authors conducted interviews with original project management as well as a thorough document review and qualitative content analysis of published papers, books, presentations, and other relevant print media. A semi-structured and cross-vetted coding was applied across the five domains: Disseminating Science, Creating Awareness, Catalyzing Action, Effecting Change, and Shaping the Future. The 2001-2002 survey findings greatly enhanced understanding and awareness of respirator use in occupational settings within the United States. It also led to similar surveys in other countries, regulatory initiatives by the Occupational Safety and Health Administration and Mine Safety and Health Administration, and ultimately to a renewed partnership between NIOSH and BLS to collect contemporary estimates of respirator use in the workplace within the United States.
Asunto(s)
Salud Laboral , Dispositivos de Protección Respiratoria , Centers for Disease Control and Prevention, U.S. , National Institute for Occupational Safety and Health, U.S. , Estados Unidos , Ventiladores MecánicosRESUMEN
Since the beginning of the COVID-19 pandemic, there has been intense debate over SARS-CoV-2's mode of transmission and appropriate personal protective equipment for health care workers in low-risk settings. The objective of this review is to identify and appraise the available evidence (clinical trials and laboratory studies on masks and respirators, epidemiological studies, and air sampling studies), clarify key concepts and necessary conditions for airborne transmission, and shed light on knowledge gaps in the field. We find that, except for aerosol-generating procedures, the overall data in support of airborne transmission-taken in its traditional definition (long-distance and respirable aerosols)-are weak, based predominantly on indirect and experimental rather than clinical or epidemiological evidence. Consequently, we propose a revised and broader definition of "airborne," going beyond the current droplet and aerosol dichotomy and involving short-range inhalable particles, supported by data targeting the nose as the main viral receptor site. This new model better explains clinical observations, especially in the context of close and prolonged contacts between health care workers and patients, and reconciles seemingly contradictory data in the SARS-CoV-2 literature. The model also carries important implications for personal protective equipment and environmental controls, such as ventilation, in health care settings. However, further studies, especially clinical trials, are needed to complete the picture.
Asunto(s)
Aerosoles/análisis , Infecciones por Coronavirus/prevención & control , Infecciones por Coronavirus/transmisión , Control de Infecciones/métodos , Pandemias/prevención & control , Material Particulado/análisis , Equipo de Protección Personal/provisión & distribución , Neumonía Viral/prevención & control , Neumonía Viral/transmisión , Betacoronavirus , COVID-19 , Infección Hospitalaria/prevención & control , Infección Hospitalaria/transmisión , Personal de Salud/estadística & datos numéricos , Humanos , Modelos Biológicos , SARS-CoV-2 , VentilaciónRESUMEN
BACKGROUND: The elderly population in Hong Kong is rapidly growing, and the need for residential care homes (RCHs) is increasing. The risk of being infected with micro-organisms increases among the frail and the vulnerable elderly population as their immunity system begins to deteriorate. Furthermore, the residents in RCHs are at high risk of healthcare-associated infections (HAIs) due to the confined living environments and individual co-morbidities. In relation to this, infection control practice (ICP) is considered a crucial and effective approach in preventing HAIs. This study aimed to observe the daily ICP of healthcare workers in RCH settings. METHODS: An observational study was conducted to observe daily ICP among healthcare workers in private and subsidized RCHs. Each RCH was separated into different units based on the location (common area and bedroom area) and nature of residents for successive days. The ICP episodes were observed until 200 opportunities in each unit. The ICP episodes were recorded by an electronic tool called "eRub," which is an ICP checklist based on international guidelines. RESULTS: The most frequent observed ICP episodes were hand hygiene (n = 1053), the use of gloves (n = 1053) and respiratory protection (n = 1053). The overall compliance of hand hygiene was poor, with only 15% of participants performing this during the "five moments for hand hygiene." Furthermore, the observations showed that 77.9% improperly performed the use of gloves, and 31.8% failed to wear a mask during the care provision for the elderly. However, the results showed that most healthcare workers can wear the mask in a proper way when they should. Generally, the personal care workers were the worst in terms of hand hygiene and use of gloves compared with the other types of healthcare workers. CONCLUSIONS: Despite the fact that the practice of hand hygiene, the use of gloves, and respiratory protection were the important elements of ICP, overall compliance to these elements was still poor. Personal care workers had the most frequent contact with the residents, but they had the worst compliance rate. Hence, continued monitoring and training among healthcare workers is needed, particularly personal care workers, in this healthcare service setting.
Asunto(s)
Infección Hospitalaria/prevención & control , Adhesión a Directriz/estadística & datos numéricos , Instituciones de Salud , Personal de Salud , Hogares para Ancianos , Control de Infecciones/métodos , Casas de Salud , Infección Hospitalaria/epidemiología , Guantes Protectores , Desinfección de las Manos/métodos , Hong Kong/epidemiología , Humanos , Máscaras , Guías de Práctica Clínica como Asunto , Dispositivos de Protección RespiratoriaRESUMEN
Disposable N95 respirator masks are the current standard for healthcare worker respiratory protection in the COVID-19 pandemic. In addition to shortages, qualitative fit testing can have low sensitivity for detecting poor fit, leading to inconsistent protection. Multiple groups have developed alternative solutions such as modified snorkel masks to overcome these limitations, but validation of these solutions has been lacking. We sought to determine if N95s and snorkel masks with attached high-efficiency filters provide consistent protection levels in healthcare workers and if the addition of positive pressure via an inexpensive powered-air purifying respirator to the snorkel mask would provide enhanced protection. Fifty-one healthcare workers who were qualitatively fitted with N95 masks underwent quantitative mask fit testing according to a simulated workplace exercise protocol. N95, snorkel masks with high-efficiency filters and snorkel masks with powered-air purifying respirators were tested. Respiratory filtration ratios were collected for each step and averaged to obtain an overall workplace protocol fit factor. Failure was defined as either an individual filtration ratio or an overall fit factor below 100. N95s and snorkel masks with high-efficiency filters failed one or more testing steps in 59% and 20% of participants, respectively, and 24% and 12% failed overall fit factors, respectively. The snorkel masks with powered-air purifying respirators had zero individual or overall failures. N95 and snorkel masks with high-efficiency filter respirators were found to provide inconsistent respiratory protection in healthcare workers.
Asunto(s)
COVID-19/prevención & control , Análisis Costo-Beneficio/normas , Personal de Salud/normas , Máscaras/normas , Respiradores N95/normas , Adulto , COVID-19/economía , Estudios de Cohortes , Diseño de Equipo/economía , Diseño de Equipo/normas , Femenino , Personal de Salud/economía , Humanos , Masculino , Máscaras/economía , Persona de Mediana Edad , Respiradores N95/economía , Exposición Profesional/economía , Exposición Profesional/prevención & control , Equipo de Protección Personal/economía , Equipo de Protección Personal/normas , Estudios Prospectivos , Reproducibilidad de los ResultadosRESUMEN
In response to the shortage of N95 filtering facepiece respirators for healthcare workers during the COVID-19 pandemic, the Centers for Disease Control and Prevention issued guidance for extended use and limited reuse of N95 FFRs to conserve supply. Previously worn N95 filtering facepiece respirators can serve as a source of pathogens, which can be transferred to the wearer while doffing and donning a respirator when practicing reuse. When practicing limited filtering facepiece respirators reuse, to reduce the risk of self-contamination, the Centers for Disease Control and Prevention recommends storing filtering facepiece respirators for five days between uses to allow for the decay of viable pathogens including SARS-CoV-2. This study assesses the persistence of the SARS-CoV-2 strain USA-WA1/2020 on N95 filtering facepiece respirators under controlled storage conditions for up to 5 days to inform the Centers for Disease Control and Prevention guidance. Coupons excised from six N95 filtering facepiece respirator models and glass slide coverslips were inoculated with the virus in a defined culture medium and in human saliva and stored at 20 °C and 20%, 45%, and 75% relative humidity. Statistically significant differences in SARS-CoV-2 half-lives were measured among the tested humidity levels with half-lives decreasing from an average of approximately 30 hr at 20% relative humidity to approximately 2 hr at 75% relative humidity. Significant differences in virus half-lives were also observed between the culture medium and saliva suspension media at 20% and 45% relative humidity with half lives up to 2.9 times greater when the virus was suspended in cell culture medium. The 5-day storage strategy, assessed in this study, resulted in a minimum of 93.4% reduction in viable virus for the most challenging condition (20% relative humidity, cell culture medium) and exceeding 99% reduction in virus at all other conditions.
Asunto(s)
COVID-19 , Dispositivos de Protección Respiratoria , Equipo Reutilizado , Humanos , Respiradores N95 , Pandemias , SARS-CoV-2 , Ventiladores MecánicosRESUMEN
A quantitative fit test is performed using a benchtop instrument (e.g., TSI PortaCount) to assess the fit factor provided by a respirator when assigned to a worker. There are no wearable instruments on the market to measure protection factors while the respirator is in use. The aim of this study is to evaluate two new, wearable, quantitative instruments-a dual-channel optical particle counter (DC OPC) and a dual-channel condensation particle counter (DC CPC)-that would enable in-situ, real-time measurement of respirator workplace protection factor. Respirator laboratory protection factors measured by the new instruments were compared to those measured with the TSI PortaCount on one test subject for three test aerosols (sodium chloride, incense, ambient) at target laboratory protection factors of 100, 300, and 1,000 for sodium chloride and ambient, and 75 and 500 for incense. Three replicates were performed for each test condition. Data were analyzed with a two-sided paired t-test at a significance level of 0.05. Laboratory protection factors measured with the DC CPC agree with those measured with the PortaCount whereas those from the DC OPC generally do not. Mean laboratory protection factors derived from the DC CPC are only statistically significantly different for mean values of a laboratory protection factor at ambient conditions for a target laboratory protection factor of 300 (p = 0.02) and for incense at a target laboratory protection factor of 75 (p = 0.03). Although statistically significant, the difference in laboratory protection factors derived from the DC CPC are not substantial in practice and may be explained by systematic uncertainty. In contrast, the DC OPC reports substantially larger mean laboratory protection factors, differing by about half an order of magnitude in extreme cases, and statistically significantly different mean laboratory protection factors for the sodium chloride aerosol for target laboratory protection factors of 100 and 300 (p = 0.01 and p = 0.01).