Effective green treatment of sewage sludge from Fenton reactions: Utilizing MoS2 for sustainable resource recovery.

Effectively managing sewage sludge from Fenton reactions in an eco-friendly way is vital for Fenton technology's viability in pollution treatment. This study focuses on sewage sludge across various treatment stages, including generation, concentration, dehydration, and landfill, and employs chemical composite MoS2 to facilitate green resource utilization of all types of sludge. MoS2, with exposed Mo4+ and low-coordination sulfur, enhances iron cycling and creates an acidic microenvironment on the sludge surface. The MoS2-modified iron sludge exhibits outstanding (>95%) phenol and pollutant degradation in hydrogen peroxide and peroxymonosulfate-based Fenton systems, unlike unmodified sludge. This modified sludge maintains excellent Fenton activity in various water conditions and with multiple anions, allowing extended phenol degradation for over 14 d. Notably, the generated chemical oxygen demand (COD) in sludge modification process can be efficiently eliminated through the Fenton reaction, ensuring effluent COD compliance and enabling eco-friendly sewage sludge resource utilization.

Microbial Succession on Microplastics in Wastewater Treatment Plants: Exploring the Complexities of Microplastic-Microbiome Interactions.

Despite some effectiveness of wastewater treatment processes, microplastics accumulate in sewage sludge and their further use may contribute to the release of plastic microplastics into the environment. There is an urgent need to reduce the amount of microplastics in sewage sludge. Plastic particles serve as solid substrates for various microorganisms, promoting the formation of microbial biofilms with different metabolic activities. The biofilm environment associated with microplastics will determine the efficiency of treatment processes, especially biological methods, and the mechanisms of organic compound conversion. A significant source of microplastics is the land application of sewage sludge from wastewater treatment plants. The detrimental impact of microplastics affects soil enzymatic activity, soil microorganisms, flora, fauna, and plant production. This review article summarizes the development of research related to microplastics and discusses the issue of microplastic introduction from sewage sludge. Given that microplastics can contain complex composite polymers and form a plastisphere, further research is needed to understand their potential environmental impact, pathogenicity, and the characteristics of biofilms in wastewater treatment systems. The article also discusses the physicochemical properties of microplastics in wastewater treatment plants and their role in biofilm formation. Then, the article explained the impact of these properties on the possibility of the formation of biofilms on their surface due to the peculiar structure of microorganisms and also characterized what factors enable the formation of specific plastisphere in wastewater treatment plants. It highlights the urgent need to understand the basic information about microplastics to assess environmental toxicity more rationally, enabling better pollution control and the development of regulatory standards to manage microplastics entering the environment.

Quantitative Non-targeted Screening to Profile Micropollutants in Sewage Sludge Used for Agricultural Field Amendments.

A considerable number of micropollutants from human activities enter the wastewater network for removal. However, at the wastewater treatment plant (WWTP), some proportion of these compounds is retained in the sewage sludge (biosolids), and due to its high content of nutrients, sludge is widely applied as an agricultural fertilizer and becomes a means for the micropollutants to be introduced to the environment. Accordingly, a holistic semiquantitative nontarget screening was performed on sewage sludges from five different WWTPs using nanoflow liquid chromatography coupled to high-resolution Orbitrap mass spectrometry. Sixty-one inorganic elements were measured using inductively coupled plasma mass spectrometry. Across all sludges, the nontarget analysis workflow annotated >21,000 features with chemical structures, and after strict prioritization and filtering, 120 organic micropollutants with diverse chemical structures and applications such as pharmaceuticals, pesticides, flame retardants, and industrial and natural compounds were identified. None of the tested sludges were free from organic micropollutants. Pharmaceuticals contributed the largest share followed by pesticides and natural products. The predicted concentration of identified contaminants ranged between 0.2 and 10,881 ng/g dry matter. Through quantitative nontarget analysis, this study comprehensively demonstrated the occurrence of cocktails of micropollutants in sewage sludges.

Is Pyrolysis Treatment a Viable Solution to Detoxify Metal(loid)s in Sewage Sludge toward Land Application? Case Studies of Chromium and Zinc.

Metal(loid)s in sewage sludge (SS) are effectively immobilized after pyrolysis. However, the bioavailability and fate of the immobilized metal(loid)s in SS-derived biochar (SSB) following land application remain largely unknown. Here, the speciation and bioavailability evolution of SSB-borne Cr and Zn in soil were systematically investigated by combining pot and field trials and X-ray absorption spectroscopy. Results showed that approximately 58% of Cr existing as Cr(III)-humic complex in SS were transformed into Fe (hydr)oxide-bound Cr(III), while nano-ZnS in SS was transformed into stable ZnS and ferrihydrite-bound species (accounting for over 90% of Zn in SSB) during pyrolysis. All immobilized metal(loid)s, including Cr and Zn, in SSB tended to be slowly remobilized during aging in soil. This study highlighted that SSB acted as a dual role of source and sink of metal(loid)s in soil and posed potential risks by serving a greater role of a metal(loid) source than a sink when applied to uncontaminated soils. Nevertheless, SSB could impede the translocation of metal(loid)s from soil to crop compared to SS, where coexisting elements, including Fe, P, and Zn, played critical roles. These findings provide new insights for understanding the fate of SSB-borne metal(loid)s in soil and assessing the viability of pyrolyzing SS for land application.

Bioavailability transition path of phosphorus species during the sewage sludge incineration process.

Sewage sludge incineration ash (SSIA) is rich in phosphorus (P), thus being considered as a reliable source of phosphorus recovery. Different P species behaved significant bioavailability. Based on this, a comprehensive investigation into the bioavailability transition path of P species during sewage sludge (SS) incineration was conducted. P predominantly existed in the form of inorganic phosphorus (IP) in SS with a higher concentration of non-apatite inorganic phosphorus (NAIP) and less concentration of apatite inorganic phosphorus (AP). During the SS incineration process, OP existed in the flocs and cell structures of SS underwent destruction, the released P then combined with metal elements such as Ca, Mg, Fe, and Al to form AP species (Ca/Mg-P) and NAIP species (Fe/Al/Mn-P), and the NAIP decomposition to release into gas phase. This was the initial step for enhancing the bioavailability of P species. As temperature increased and the incineration process progressed, the low-temperature-resistant NAIP dissociated, and the metal-binding sites of Al, Fe and Mn in NAIP species were gradually replaced by the Ca and Mg thus forming thermal stability AP species (Ca/Mg-P, such as CaHPO4, Ca2PO4Cl, and Mg3(PO4)2 et al.). This step was crucial for the bioavailability improvement of P species during the incineration process. Therefore, the IP proportions in TP were extremely high (＞98%), and this value gradually increased as incineration temperature raised. The higher incineration temperature, the lower NAIP concentration and higher AP concentration. Besides, additives such as coal/rice husk/eggshell played a significant affect. Additives wither higher Ca content were inclined to react with P to form Ca/Mg-P (AP), while the presence of SO2 would react with Ca metals to form CaSO4 thus inhibiting the formation of AP species (such as CaHPO4 and CaPO4Cl). This results could provide theoretical support for the efficient and directional migration of P during sewage sludge incineration.

Culture-based and molecular investigation of antibiotic and metal resistance in a semi-arid agricultural soil repeatedly amended with urban sewage sludge.

Unsustainable agricultural intensification and climate change effects have caused chronic soil depletion in most arid and semi-arid croplands. As such, the land application of urban sewage sludge (USS) has been regulated in several countries as an alternative soil conditioner with recycling benefits. However, the risks of multi-contamination have made its agricultural reuse debatable. Accordingly, this study explored the long-term the impact of repetitive USS applications with increasing rates (0, 40, 80, and 120 t ha-1 year-1) on a sandy soil properties. A special focus was on the spread of antibiotic-resistant bacteria, metal-resistant bacteria and corresponding resistance genes in soil (ARB, MRB, ARGs and MRGs, respectively). The outcomes showed a dose-dependent variation of different soil parameters including the increase of heavy metal content and total heterotrophic bacteria (THB) up to the highest sludge application rate. Besides, the two last sludge lots applied in fall 2019 and 2020 contained cultivable ARB for all addressed antibiotics at much higher counts than in corresponding treated soils. Interestingly, the average index of antibiotic resistance (ARB/THB) increased in the USS used in fall 2020 compared to 2019 (from 6.2% to 9.4%). This indicates that factors such as fluctuations in wastewater quality, treatments operations, and extensive antibiotic use following the outbreak of the COVID-19 pandemic in early 2020 could have caused this variation. The molecular assessment of bacterial resistance resulted in the identification of three ARGs (mefA, sul1 and sul2), one MRG (czcA) and one integron (intI1). This might have implications on resistance co-selection, which can pose a threat to human health via contaminated crops.

Novel cow dung-doped sludge biochar as an efficient ozone catalyst: Synergy between graphitic structure and defects induces free radical pathways.

A composite material, cow dung-doped sludge biochar (Zn@SBC-CD), was synthesized by one-step pyrolysis using ZnCl2 as an activating agent and applied to a catalytic ozonation process (COP) for methylene blue (MB) removal. SEM, XRD, FTIR, XPS and BET analyses were performed to characterize the biochar (BC) catalysts. Zn@SBC-CD had high graphitization degree, abundant active sites and uniform distribution of Zn on its surface. Complete removal of MB was achieved within 10 min, with a removal rate much higher than that of ozone alone (32.4%), implying the excellent ozone activation performance of Zn@SBC-CD. The influence of experimental parameters on MB removal efficiency was examined. Under the optimum conditions in terms of ozone dose 0.04 mg/mL, catalyst dose 400 mg/L and pH 6.0, COD was completely removed after 20 min. Electron paramagnetic resonance (EPR) analysis revealed radical and non-radical pathways were involved in MB degradation. The Zn@SBC-CD/O3 system generated superoxide anion radicals (•O2-), which were the main active species for MB removal, through adsorption, transformation, and transfer, Furthermore, Zn@SBC-CD exhibited good reusability and stability in cycling experiments. This study provides a novel approach for the utilization of cow dung and sludge in synthesis of functional biocatalysts and application in organic wastewater treatment.

Succession from acetoclastic to hydrogenotrophic microbial community during sewage sludge anaerobic digestion for bioenergy production.

To assess microbial dynamics during anaerobic digestion (AD) of sewage sludge (SWS) from a municipal Wastewater Treatment Plant (WWTP), a Biochemical Methane Potential (BMP) assay at 37 °C under mono-digestion conditions was conducted. Utilizing the Illumina MiSeq platform, 16S ribosomal RNA (rRNA) gene sequencing unveiled a core bacterial community in the solid material, showcasing notable variations in profiles. The research investigates changes in microbial communities and metabolic pathways to understand their impact on the efficiency of the digestion process. Prior to AD, the relative abundance in SWS was as follows: Proteobacteria > Bacteroidota > Actinobacteriota. Post-AD, the relative abundance shifted to Firmicutes > Synergistota > Proteobacteria, with Sporanaerobacter and Clostridium emerging as dominant genera. Notably, the methanogenic community underwent a metabolic pathway shift from acetoclastic to hydrogenotrophic in the lab-scale reactors. At the genus level, Methanosaeta, Methanolinea, and Methanofastidiosum predominated initially, while post-AD, Methanobacterium, Methanosaeta, and Methanospirillum took precedence. This metabolic transition may be linked to the increased abundance of Firmicutes, particularly Clostridia, which harbor acetate-oxidizing bacteria facilitating the conversion of acetate to hydrogen.

Global performance and trends of research on emerging contaminants in sewage sludge: A Bibliometric Analysis from 1990 to 2023.

The pervasive occurrence of emerging contaminants (ECs) in sewage sludge (SWS) poses significant safety challenges concerning the processing, disposal, and secure application, ultimately jeopardizing both human health and the ecological environment. To comprehensively comprehend the evolutionary trajectories, present state, and research advancements in the field of ECs in SWS, a systematic was conducted, scrutinizing the annual publication quantity, disciplinary distribution, core authors, involved nations/regions, pertinent keywords, and citation status of 2082 research publications related to ECs in SWS from 1990 to 2023. The results indicate a substantial upward trajectory in the research literature pertaining to ECs in SWS. The study of ECs in SWS encompasses 78 disciplines, including Environmental Sciences, Environmental Engineering, and Water Resources. China, Spain, and the USA ranked among the top three countries in terms of both total publications and citation frequency. The majority of publications were published in reputable high-impact journals such as Science of the Total Environment, Chemosphere, and Bioresource Technology. Based on high-frequency keywords, co-occurrence networks of keywords, and keywords burst analysis, it is found that the occurrence and environment behavior of ECs in SWS (ARGs, microplastics, PPCPs, and POPs), the detection and analytical methods, the impact on SWS treatment and disposal processes, and the accumulation and ecological risks in plants and soil during SWS land utilization, are the main research directions and hot topics in this field. In the future, the study of the impact of SWS treatment technologies on ECs removal is expected to receive increased research attention.

Acceleration of the biodegradation of cationic polyacrylamide by the coupling effect of thermophilic microorganisms and high temperature in hyperthermophilic composting.

As a flocculant of sewage sludge, cationic polyacrylamide (CPAM) enters the environment with sludge and exists for a long time, posing serious threats to the environment. Due to the environmental friendliness and high efficiency in the process of organic solid waste treatment, hyperthermophilic composting (HTC) has received increasing attention. However, it is still unclear whether the HTC process can effectively remove CPAM from sludge. In this study, the effects of HTC and conventional thermophilic composting (CTC) on CPAM in sludge were compared and analyzed. At the end of HTC and CTC, the concentrations of CPAM were 278.96 mg kg-1 and 533.89 mg kg-1, respectively, and the removal rates were 72.17% and 46.61%, respectively. The coupling effect of thermophilic microorganisms and high temperature improved the efficiency of HTC and accelerated the biodegradation of CPAM. The diversity and composition of microbial community changed dramatically during HTC. Geobacillus, Thermobispora, Pseudomonas, Brevundimonas, and Bacillus were the dominant bacteria responsible for the high HTC efficiency. To our knowledge, this is the first study in which CPAM-containing sludge is treated using HTC. The ideal performance and the presence of key microorganisms revealed that HTC is feasible for the treatment of CPAM-containing sludge.

The high dose of biochar reduces polycyclic aromatic hydrocarbons losses during co-composting of sewage sludge and wheat straw.

The aim of the study was to investigate the effect of the biochar (BC) dose on solvent extractable (Ctot) and freely dissolved (Cfree) polycyclic aromatic hydrocarbons (PAHs) content during co-composting. A significantly better reduction of Σ16 Ctot PAHs after 98 days occurred during composting with BC (for 1% of BC - 44% and for 5% of BC - 23%) than in the control (15%). Despite the relatively high reduction of Ctot PAHs in the experiment with 5% BC rate, the content of the PAHs was still the highest compared to other variants. Regarding Cfree PAHs, 5% rate of BC resulted in the best reduction of PAHs, while the 1% BC dose resulted in a lower reduction of Cfree than the control. For 1% BC, PAHs losses was more effective, and sequestration processes played a less significant role than in the experiment with 5% dose of BC. The total and dissolved organic carbon, and ash were predominantly responsible for Ctot and Cfree losses, and additionally pH for Cfree. The results of the experiment indicate that BC performs a crucial role in composting, affecting the Ctot and Cfree PAHs in the compost but the final effect strictly depends on the BC dose.

Pyrolysis behavior of sewage sludge coexisted with microplastics: Kinetics, mechanism, and product characteristics.

Microplastics can accumulate in the excess sludge from wastewater treatment plants through domestic wastewater. This study investigated the co-pyrolysis behavior of sewage sludge coexisting with two types of microplastics (polyethylene (PE) and polylactic acid (PLA)) and found a superior comprehensive pyrolysis performance. By calculating the difference between theoretical and experimental weight loss during the pyrolysis process, it was found that the incorporation of microplastics PE and PLA created a synergistic effect at 270°C-450 °C, which was confirmed through the Malek method analysis from a pyrolysis mechanism perspective that it could increase the random nuclei on each particle, that is, enhance the heterogeneous diffusion of volatiles. The average activation energy was reduced by 84.99 kJ/mol, as determined using three isoconversional methods: Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink. Regarding the products, the aforementioned synergistic effect led to a reduction in char retention and larger specific surface area of the biochar, while the quantities of gaseous products and bio-oil escalated. Through a thermogravimetric analyzer and Fourier transform infrared spectroscopy (TG-FTIR), an increase in aromatic hydrocarbons, alkanes, aldehydes, ethers, and esters in the gaseous products were detected. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) revealed an increase in hydrocarbons, esters, and alcohols in the bio-oil, and acids and aldehydes decreased, overall enhancing the quality of the bio-oil. This study elucidated that pyrolysis completely transformed microplastics in sludge, thus eliminating environmental risks and provided a theoretical reference for understanding the pyrolysis behavior of sludge containing microplastics.

The effect of an acidic environment during the hydrothermal carbonization of sewage sludge on solid and liquid products: The fate of heavy metals, phosphorus and other compounds.

The pH of sewage sludge is a crucial factor during the hydrothermal carbonization process that influences the characteristics of the resulting products and migration of certain compounds from the solid to liquid phase. Accordingly, this work is focused on examining the pH impact during the HTC process, in particular, pH equals 2, 3, 4, 5 and 6 on the individual hydrothermally carbonized products generated at 200 °C and 2 h residence time. For this reason, the chemical and physical indicators describing the post-processing liquid and hydrochar were determined. For instance, it was observed that the phosphorus content detected in the liquid, derived at pH2, rose significantly by 80%. Furthermore, decreasing the pH of sewage sludge had a significant impact on the ash content and the calorific value of the hydrochar. Additionally, changes in the specific surface area of hydrochar were noticed: pH = 5 and pH = 6 showed an increase of 20-30%, while for lower pH values a decrease of c.a. 26% was achieved. The distribution of heavy metals between the obtained fractions in the HTC process (solid and liquid) indicated that 92 to almost 100% of the tested heavy metals were transferred to the hydrochar. A significant effect of pH on the distribution between these fractions was observed only for Zn and Ni. For instance, for pH = 2, Zn and Ni in post-processing liquid were 34% and 29%, respectively. In addition, the sequential extraction of heavy metals from hydrochar was also performed in order to identify mobile and non-mobile phases. It was noticed that the acidic environment favours a higher amount of mobile heavy metals in hydrochar. The largest effect was observed for Cd, Pb, Cr and Cu, for which, at pH = 2, their respective amounts in the mobile fraction were 2.7; 3.6; 1.8; 6.2 times higher, compared to the hydrochar without pH correction.

Correlations between sewage sludge composting physicochemical parameters and emissions of greenhouse gases and ammonia: A statistical analysis.

Mitigating the environmental impact of composting by the reduction of greenhouse gases (N2O, CH4) and ammonia (NH3) emissions is a major challenge. To meet this challenge, the understanding of the relationships between composted substrates initial physicochemical parameters and gas emissions is essential. From a long-term perspective, it will allow to guide the recipe formulation of the initial mixture to be composted, with a view to reducing gas emissions during composting. This study gathered literature data targeting sewage sludge composting and performed statistical correlation analyses between cumulative gas emissions and the following parameters: sewage sludge, bulking agent and composted mixture initial physicochemical parameters (pH, dry matter, total carbon, total nitrogen, C/N), the dry mass ratio of sewage sludge to bulking agent and the duration of composting. The average values of cumulative emissions show a large variability: 1.37 ± 2.71 gC.kg initial mix DM-1, 0.13 ± 0.17 gN.kg initial mix DM-1 and 2.23 ± 2.79 gN.kg initial mix DM-1 for CH4, N2O and NH3 emissions respectively. Although the correlation analysis highlighted some significant interesting correlations between initial physicochemical parameters and gas emissions (p.value < 0.05), reliable multiparametric model could not fit the data, meaning that the actual literature data are not sufficient to explain most part of gas emissions. Among the most interesting relationships, the study showed that the dry matter of the composted mixture is negatively correlated to N2O emissions, while the ratio of sewage sludge to bulking agent and the duration of composting are positively correlated to N2O emissions. It was also shown that the pH of the bulking agent is positively correlated to NH3 emissions. Considering the large part of the emission variability that is not explained and the difficulty to link the correlation with their causality, it will be interesting to improve composting gas emissions knowledge in future research by analyzing free air space, bulking agent adsorption capacity and available and biodegradable organic matter. These parameters are of particular interest in solving the main problems associated with sewage sludge composting, namely porosity and nitrogen retention. This study also highlighted the necessity to extend the duration of the composting studies over 40 days in order to measure possible N2O late release and better identify parameters influencing N2O emissions.

Effects of alkali and alkaline earth metals on co-combustion of sewage sludge and coal slime: Combustion characteristics, interactions, and kinetics.

The co-combustion of sewage sludge (SS) and coal slime (CS) is a preferred method for their resource utilization, however, alkali and alkaline earth metals (AAEMs) in SS may affect the co-combustion process. In this work, the co-combustion behavior of AAEMs-rich SS and CS was investigated in terms of combustion characteristics, interactions, and combustion kinetics using a thermogravimetric analyzer. Further, the role of AAEMs in co-combustion was evaluated by loading Ca, K, Na, and Mg individually after pickling. The results revealed that co-combustion compensated for the limitations of the individual combustion processes, with SS reducing ignition and burnout temperatures and CS improving the comprehensive combustion characterization. Principal component analysis (PCA) showed that the effect of CS on co-combustion was more significant compared to SS. Significant synergies were observed in the weight loss phase of fixed carbon in the blends with 40%, 50%, and 60% CS ratios, where the peak temperature of fixed carbon combustion was reduced by 9.8 °C, 12.6 °C, and 13.1 °C, respectively, compared to the theoretical values. The effects of AAEMs on combustion were as follows: all AAEMs promoted the precipitation of volatiles except Ca, which showed inhibition of light volatiles; AAEMs had a significant catalytic effect on fixed carbon combustion. The improvement effect of AAEMs on the comprehensive combustion characteristics during co-combustion was Na > K > Mg > Ca. The catalytic effect of Na on fixed carbon was strongest at a loading of 5%, leading to a decrease in the apparent activation energy of fixed carbon combustion by 22.2 kJ/mol and a change in reactor order from n = 1 to n = 1.2 during co-combustion. This work provides a better understanding of the role of AAEMs in SS-CS co-combustion.

Ensuring safety standards in sewage sludge-derived biochar: Impact of pyrolysis process temperature and carrier gas on micropollutant removal.

The application of sewage sludge to agricultural land is facing increasing restrictions due to concerns about various micropollutants, including polycyclic aromatic hydrocarbons (PAHs), dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCBs), per- and poly-fluoroalkyl substances (PFAS), and heavy metals (HMs). As an alternative approach to manage this residue, the use of pyrolysis, a process that transforms sludge into biochar, a carbon-rich solid material, is being explored. Despite the potential benefits of pyrolysis, there is limited data on its effectiveness in removing micropollutants and the potential presence of harmful elements in the resulting biochar. This study aims to evaluate the impact of the temperature and the use of a carrier gas (N2) during a two-stage pyrolysis and cooling on micropollutant removal. Pilot-scale tests showed that a higher temperature (650 °C) and the use of a carrier gas (0.4 L/min N2) during the pyrolysis and the cooling process led to a reduction of PAHs, PCDD/Fs, PCBs and PFAS below their detection limits. As such, the generated biochar aligns with the guidelines set by the International Biochar Initiative (IBI) and the European Biochar Certificate (EBC) for all micropollutants, except for zinc and copper. Additional investigation is required to determine whether the micropollutants undergo destruction or transition into other pyrolysis end-products, such as the gas or liquid phase.

Research progress in improving sludge dewaterability: sludge characteristics, chemical conditioning and influencing factors.

Sludge from wastewater treatment processes with high water content and large volume has become an inevitable issue in environmental management. Due to the challenging dewatering properties of sludge, current mechanical dewatering methods are no longer sufficient to meet the escalating water content standards of sludge. This paper summarizes the characteristics of various sludge and raises reasons for the their dewaterability differences. Affected by extracellular polymeric substances, biological sludge is hydrophilic and negatively charged, which limits the dewatering degree. The rheological properties, flocs, ionic composition, and solid phase concentration of the sludge also influence the dewatering to some extent. For these factors, the chemical conditioning measures with simple operation and excellent effect improve its dewaterability, which mainly include flocculation/coagulation, acid/alkali treatment, advanced oxidation, surfactant treatment and combined treatment. There is a growing necessity to explore the development of new chemical conditioning agents, even though traditional agents continue to remain widely used. However, the development of these new agents should prioritize finding a balance between various factors such as efficiency, effectiveness, ease of operation, environmental safety, and cost-effectiveness. Electrochemical dewatering enhances solid-liquid separation, and its coupling with chemical conditioning is also an excellent means to further reduce water content. In addition, the improvement of press filter is an effective way, which is influenced by pressure, processing time, sludge cake thickness and pore structure, filter media etc. In general, it is essential to develop new conditioning agents and enhance mechanical filtration press technology based on a thorough understanding of various sludge properties. Concurrently, an in-depth study of the principles of mechanical pressure filtration will contribute to establishing a theoretical foundation for effective deep sludge dewatering and propel further advancements in this field.

Optimizing phosphorus precipitation from acidic sewage sludge ash leachate: Use of Mg-rich mining by-products for enhanced nutrient recovery.

Phosphorus recovery from Sewage Sludge Ashes (SSA) by wet chemical extraction followed by selective precipitation has gained great attention in recent years, attempting to reduce the anthropic pressure on natural reserves. This study investigates the selective precipitation process at lab- and small pilot-scales by means of two conventional and one innovative precipitating agents, the latter derived from a low-grade magnesium oxide mining by-product (LG-MgO named PC8), assessing the role of the most relevant operating parameters. Lab-scale experiments were performed on leachates obtained from bottom and fly ashes, in which several operating conditions were tested, differing in the type of precipitating agent, target pH and nutrient molar ratio. Based on experimental results, small pilot-scale experiments were conducted with Ca(OH)2 and PC8 at pH 7. Effective phosphorus precipitation was obtained at lab-scale at pH equal to 4 for high Al/P molar ratio, while SSA leachate with low Al/P molar ratio promoted improved phosphorus precipitation (>90%) only at pH higher than 8 with PC8. Small pilot-scale findings confirmed the effectiveness of PC8 in increasing simultaneously the pH and the nutrient content of the solid precipitate. The comprehensive assessment of the samples denoted compliance with the European Regulation (EU 2019/1009), which allows the formulation of different fertilizers with agronomic relevance. This is the first time that experiments from small pilot-scale tests in the field of phosphorus recovery from SSA were investigated using an innovative precipitant providing key information for the process scale-up.

A pilot-scale evaluation of residual sludge quality in a worm-sludge treatment reed bed in the Mediterranean region.

A pilot-scale study on sludge treatment reed beds investigated the combined effects of earthworms and Arundo donax on sewage sludge dewatering and residual sludge quality. Four units were tested: one planted with earthworms, one planted without earthworms, one unplanted with earthworms, and one control, each unit replicated. Over a year, 24 cycles of sludge (dry and volatile solid contents of 24.71 g.L-1, and 19.14 g.L-1) were fed onto the units at a sludge loading rate: 43.59 kg.DS.m-2.year-1. Afterward, the units experienced 132 days of resting period, increasing dry solids from 21 to 70 % and decreasing volatile solids from 81 to 69 % on average (40 % sludge volume reduction). The bottom layers of the planted unit with earthworms showed a 30 % reduction in volatile solids, indicating improved sludge stabilization. Macronutrient abundance in the residual sludge followed the sequence N > Ca > P > K > S > Mg. The planted unit with earthworms reduced micronutrient concentrations by 22 % compared to the control unit (Fe > Na > Mn > B > Mo). Earthworms also played a key role in reducing heavy metal concentrations by 11 % compared to the planted unit without earthworms (Zn > Cr > Pb > Ni > Cd). Heavy metal levels in the residual sludge met EU and Portugal standards, with a 99.9 % reduction in Escherichia coli and fecal coliforms. Cost estimation showed centrifugation and W-STRB scenarios cost 167 and 183 €.PE-1 for a ten-year operation, with O&M costs of 7 and 3 €.PE-1.year-1, respectively.

Simulation and optimization of cheese whey additive for value-added compost production: Hyperparameter tuning approach and genetic algorithm.

Cheese whey is a difficult and costly wastewater to treat due to its high organic matter and mineral content. Although many management strategies are conducted for whey removal, its use in composting is limited. In this study, the effect of cheese whey in the composting of sewage sludge and poultry waste on compost quality and process efficiency was investigated. Also, valid and consistent simulations were developed with Gaussian Process Regression (GPR), Support Vector Regression (SVR), and Neural Network Regression (NNR) Machine Learning (ML) algorithms. The results of all physicochemical parameters determined that 3% of cheese whey addition for both feedstocks improved the composting process's efficiency and the final product's quality. The best results obtained through hyperparameter tuning showed that Gaussian Process Regression (GPR) was the most effective modeling tool providing realistic simulations. The reliability of these simulations was verified by running the GPR process 50 times. MdAPE demonstrated the validity and consistency of the created process simulations. Moreover, a genetic algorithm was used to optimize these dependent simulations and achieved almost 100% desirability. Optimization studies showed that the effective cheese whey ratios were 3.2724% and 3.1543% for sewage sludge and poultry waste, respectively. Optimization results were compatible with the results of experimental studies. This study provides a new strategy for the recovery of cheese whey as well as a new perspective on the effect of cheese whey on both physicochemical parameters and composting phases and the modeling and optimization processes of the results.