4D Printed Protein-AuNR Nanocomposites with Photothermal Shape Recovery.

4D printing is the 3D printing of objects that change chemically or physically in response to an external stimulus over time. Photothermally responsive shape memory materials are attractive for their ability to undergo remote activation. While photothermal methods using gold nanorods (AuNRs) have been used for shape recovery, 3D patterning of these materials into objects with complex geometries using degradable materials has not been addressed. Here, we report on the fabrication of 3D printed shape memory bioplastics with photo-activated shape recovery. Protein-based nanocomposites based on bovine serum albumin (BSA), poly (ethylene glycol) diacrylate and gold nanorods were developed for vat photopolymerization. These 3D printed bioplastics were mechanically deformed under high loads, and the proteins served as mechanoactive elements that unfolded in an energy-dissipating mechanism that prevented fracture of the thermoset. The bioplastic object maintained its metastable shape-programmed state under ambient conditions. Subsequently, up to 99% shape recovery was achieved within 1 min of irradiation with near-infrared light. Mechanical characterization and small angle X-ray scattering (SAXS) analysis suggest that the proteins mechanically unfold during the shape programming step and may refold during shape recovery. These composites are promising materials for the fabrication of biodegradable shape-morphing devices for robotics and medicine.

Hofmeister-Effect-Driven Hybrid Glycerogels for Perfect Wide-Temperature Shape Fixity and Shape Recovery in Soft Robotics Applications.

Shape memory gels have emerged as crucial elements in soft robotics, actuators, and biomedical devices; however, several problems persist, like the trade-off between shape fixity and shape recovery, and the limited temperature range for their application. This article introduces a new class of shape memory hybrid glycerogels (GGs) designed to address these limitations. The well-modulated internal structure of the GGs, facilitated by the Hofmeister salting-out effect, strategically incorporates a higher crystallite content, abundant crosslinking points, and a high elastic modulus. Unlike reported shape memory gels, the GG exhibits a perfect triple-step shape memory behavior in air with 100% shape fixity in a wide programming temperature range (75-135 °C) and simultaneously achieves 100% shape recoverability. The gel recovers its shape at -40 °C under near-infrared light across a wide programming temperature range (25-135 °C), showing unexpected initiation even at subzero temperatures. Inspired by the mechanics of composite structures, a method is proposed to integrate the GG seamlessly with a shape memory alloy, which further expands the temperature range that yields perfect shape memory properties. Finally, two light-controlled fluttering and crawling soft robot prototypes are engineered to illustrate the versatility and potential applications of the composite gel in soft robotics.

Recent Advances in Polymer Nanocomposites: Unveiling the Frontier of Shape Memory and Self-Healing Properties-A Comprehensive Review.

Shape memory and self-healing polymer nanocomposites have attracted considerable attention due to their modifiable properties and promising applications. The incorporation of nanomaterials (polypyrrole, carboxyl methyl cellulose, carbon nanotubes, titania nanotubes, graphene, graphene oxide, mesoporous silica) into these polymers has significantly enhanced their performance, opening up new avenues for diverse applications. The self-healing capability in polymer nanocomposites depends on several factors, including heat, quadruple hydrogen bonding, π-π stacking, Diels-Alder reactions, and metal-ligand coordination, which collectively govern the interactions within the composite materials. Among possible interactions, only quadruple hydrogen bonding between composite constituents has been shown to be effective in facilitating self-healing at approximately room temperature. Conversely, thermo-responsive self-healing and shape memory polymer nanocomposites require elevated temperatures to initiate the healing and recovery processes. Thermo-responsive (TRSMPs), light-actuated, magnetically actuated, and Electrically actuated Shape Memory Polymer Nanocomposite are discussed. This paper provides a comprehensive overview of the different types of interactions involved in SMP and SHP nanocomposites and examines their behavior at both room temperature and elevated temperature conditions, along with their biomedical applications. Among many applications of SMPs, special attention has been given to biomedical (drug delivery, orthodontics, tissue engineering, orthopedics, endovascular surgery), aerospace (hinges, space deployable structures, morphing aircrafts), textile (breathable fabrics, reinforced fabrics, self-healing electromagnetic interference shielding fabrics), sensor, electrical (triboelectric nanogenerators, information energy storage devices), electronic, paint and self-healing coating, and construction material (polymer cement composites) applications.

Chitosan Sponges with Instantaneous Shape Recovery and Multistrain Antibacterial Activity for Controlled Release of Plant-Derived Polyphenols.

Biomass-derived materials with multiple features are seldom reported so far. Herein, new chitosan (CS) sponges with complementary functions for point-of-use healthcare applications were prepared by glutaraldehyde (GA) cross-linking and tested for antibacterial activity, antioxidant properties, and controlled delivery of plant-derived polyphenols. Their structural, morphological, and mechanical properties were thoroughly assessed by Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and uniaxial compression measurements, respectively. The main features of sponges were modulated by varying the CS concentration, cross-linking ratio, and gelation conditions (either cryogelation or room-temperature gelation). They exhibited complete water-triggered shape recovery after compression, remarkable antibacterial properties against Gram-positive (Staphylococcus aureus (S. aureus), Listeria monocytogenes (L. monocytogenes)) and Gram-negative (Escherichia coli (E. coli), Salmonella typhimurium (S. typhimurium)) strains, as well as good radical scavenging activity. The release profile of a plant-derived polyphenol, namely curcumin (CCM), was investigated at 37 °C in simulated gastrointestinal media. It was found that CCM release was dependent on the composition and the preparation strategy of sponges. By linearly fitting the CCM kinetic release data from the CS sponges with the Korsmeyer-Peppas kinetic models, a pseudo-Fickian diffusion release mechanism was predicted.

A Smart Lithium Battery with Shape Memory Function.

Rapidly growing flexible and wearable electronics highly demand the development of flexible energy storage devices. Yet, these devices are susceptible to extreme, repeated mechanical deformations under working circumstances. Herein, the design and fabrication of a smart, flexible Li-ion battery with shape memory function, which has the ability to restore its shape against severe mechanical deformations, bending, twisting, rolling or elongation, is reported. The shape memory function is induced by the integration of a shape-adjustable solid polymer electrolyte. This Li-ion battery delivers a specific discharge capacity of ≈140 mAh g-1 at 0.2 C charge/discharge rate with ≈92% capacity retention after 100 cycles and ≈99.85% Coulombic efficiency, at 20 °C. Besides recovery from mechanical deformations, it is visually demonstrated that the shape of this smart battery can be programmed to adjust itself in response to an internal/external heat stimulus for task-specific and advanced applications. Considering the vast range of available shape memory polymers with tunable chemistry, physical, and mechanical characteristics, this study offers a promising approach for engineering smart batteries responsive to unfavorable internal or external stimulus, with potential to have a broad impact on other energy storage technologies in different sizes and shapes.

A Fast Shape-from-Focus-Based Surface Topography Measurement Method.

Shape from focus is an accurate, but relatively time-consuming, 3D profilometry technique (compared to e.g., laser triangulation or fringe projection). This is the case because a large amount of data that needs to be captured and processed to obtain 3D measurements. In this paper, we propose a two-step shape-from-focus measurement approach that can improve the speed with 40%. By using a faster profilometry technique to create a coarse measurement of an unknown target, this coarse measurement can be used to limit the data capture to only the required frames. This method can significantly improve the measurement and processing speed. The method was tested on a 40 mm by 40 mm custom target and resulted in an overall 46% reduction of measurement time. The accuracy of the proposed method was compared against the conventional shape from focus method by comparing both methods with a more accurate reference.

Modeling and analysis of the effect of COVID-19 on the stock price: V and L-shape recovery.

The emergence of the COVID-19 pandemic, a new and novel risk factor, leads to the stock price crash due to the investors' rapid and synchronous sell-off. However, within a short period, the quality sectors start recovering from the bottom. A stock price model has been developed to capture the price dynamics during shock and recovery phases of such crisis. The main variable and parameter of the model are the net fund flow ( Ψ t ) due to institutional investors, and financial antifragility ( ϕ ) of a company, respectively. We assume that during the crash, the stock price fall is independent of the ϕ . We study the effects of shock length ( T S ) and ϕ on the stock price during the crisis period using the Ψ t obtained from both the synthetic fund flow data and real fund flow data. We observed that the possibility of recovery of stock with ϕ > 0 , termed as quality stock, decreases with an increase in T S beyond a specific period. A quality stock with higher ϕ shows V-shape recovery and outperform others. The T S and recovery period of quality stock are almost equal in the Indian market. Financially stressed stocks, i.e., the stocks with ϕ < 0 , show L-shape recovery during the pandemic. The stock data and model analysis show that the investors, in the uncertainty like COVID-19, invest in the quality stocks to restructure their portfolio to reduce the risk. The study may help the investors to make the right investment decision during a crisis.

Jitter Elimination in Shape Recovery by using Adaptive Neural Network Filter.

Three-dimensional (3D) cameras are expensive because they employ additional charged coupled device sensors and optical elements, e.g., lasers or complicated scanning mirror systems. One passive optical method, shape from focus (SFF), provides an efficient low cost solution for 3D cameras. However, mechanical vibration of the SFF imaging system causes jitter noise along the optical axis, which makes it difficult to obtain accurate shape information of objects. In traditional methods, this error cannot be removed and increases as the estimation of the shape recovery progresses. Therefore, the final 3D shape may be inaccurate. We introduce an accurate depth estimation method using an adaptive neural network (ANN) filter to remove the jitter noise effects. Jitter noise is modeled by both Gaussian distribution and non-Gaussian distribution. Then, focus curves are modeled by quadratic functions. The ANN filter is designed as an optimal estimator restoring the original position of each frame of the input image sequence in the modeled jitter noise, as a pre-processing step before the initial depth map is obtained. The proposed method was evaluated using image sequences of both synthetic and real objects. Experimental results demonstrate that it is reasonably efficient and that its accuracy is comparable with that of existing systems.

Synthesis of High-Value Bio-Based Polyamide 12,36 Microcellular Foams with Excellent Dimensional Stability and Shape Recovery Properties.

The search for alternatives to petroleum-based thermoplastic polyamide elastomers (TPAEs) has recently drawn great interest. In this study, a bio-massed TPAE, PA12,36, was synthesized using 1,12-dodecanediamine (DDA) and fatty dimer acid (FDA, PripolTM1009) precursors via catalyst and solvent-free melt polycondensation. The molecular structure and molecular weight of the PA12,36 were characterized by 1H NMR, FTIR, and GPC. PA12,36 displayed a low melting temperature of 85.8 °C, an initial degradation temperature of 425 °C, and a glass-transition temperature of 30.4 °C, whereas it sustained satisfactory tensile strength (10.0 MPa) and superior strain at break (1378%). Furthermore, PA12,36 was foamed by supercritical CO2, and the cell size, cell density, and porosity were determined. The entangled long-chained FDA component generated a physically crosslinked network, which promoted the melt viscosity of PA12,36 against elongations of foam cell growth and increased foamability significantly. As a result, uniform structured cellular foams with a cell diameter of 15-24 µm and high cell density (1011 cells/cm3-1012 cells/cm3) were successfully achieved. The foaming window was widened from 76 to 81 °C, and the expansion ratio was increased from 4.8 to 9.6. Additionally, PA12,36 foam with a physically crosslinked structure presented a better creep shape recovery percentage (92-97.9%) and sturdier dimensional stability. This bio-based PA12,36 foam is a promising candidate to replace petroleum-based thermoplastic elastomer foams for engineering applications, particularly shoe soles.

Heat-triggered shape recovery, EMI shielding and flame retardant: A novel cellulose/M(OH)(OCH3)@dopamine@Ag (M=Co, Ni) nanopaper for early fire alarm.

Fire alarm systems are essential for protecting lives and properties from fire hazards. However, most of the existing fire alarm nanopapers rely on the resistance reduction after heating, which requires direct contact with the flame. In this study, we present a novel fire alarm nanopaper (CMPA) based on heat-triggered shape recovery. The CMPA is composed of hydroxypropyl methyl cellulose (HPMC) as the matrix and 2D nanomaterials M(OH)(OCH3) as fillers. When the temperature of CMPA exceeded the glass transition, the thrice-folded CMPA-1.0 flattened in 30s and connected to the alarm circuit based on its conductive surface. According to the results, the CMPA-1.0 with a thickness of about 0.2 mm had an efficient electromagnetic shielding of 42.1 dB. Moreover, the CMPA-1.0 self-extinguished rapidly after being ignited with its original shape preserved. The peak heat release rate of CMPA-1.0 was 108.9 W/g, which was 61.9 % lower than that of HPMC. Furthermore, the thermal conductivity of CMPA-1.0 reached to 0.317 W m-1 K-1, which was 40.8 % higher than that of HPMC, reducing the heat accumulation effectively. This work shows that CMPA is an ideal material for sensitive and safe early fire alarm, and the strategy based on heat-triggered shape recovery is promising in fire alarm application.

Coagulopathy-independent injectable catechol-functionalized chitosan shape-memory material to treat non-compressible hemorrhage.

Uncontrolled non-compressible hemorrhage, which is often accompanied by coagulopathy, is a major cause of mortality following traumatic injuries in civilian and military populations. In this study, coagulopathy-independent injectable catechol-modified chitosan (CS-HCA) hemostatic materials featuring rapid shape recovery were fabricated by combining controlled sodium tripolyphosphate-crosslinking with hydrocaffeic acid (HCA) grafting. CS-HCA exhibited robust mechanical strength and rapid blood-triggered shape recovery. Furthermore, CS-HCA demonstrated superior blood-clotting ability, enhanced blood cell adhesion and activation, and greater protein adsorption than commercial hemostatic gauze and Celox. CS-HCA showed enhanced procoagulant and hemostatic capacities in a lethal liver-perforation wound model in rabbits, particularly in heparinized rabbits. CS-HCA is suitable for mass manufacturing and shows promise as a clinically translatable hemostat.

A self-elastic chitosan sponge integrating active and passive hemostatic mechanisms for effectively managing uncontrolled coagulopathic hemorrhage.

Developing a self-elastic sponge integrating active and passive hemostatic mechanisms for the effective management of uncontrolled coagulopathic hemorrhage remains a challenge. We here developed a chitosan-based sponge by integrating freeze-drying, chemical decoration of alkyl chains and phosphate groups, and physical loading of thrombin. The sponge exhibited high mechanical strength, self-elasticity, and rapid shape recovery. The sponge facilitated blood cell adhesion, aggregation, and activation through hydrophobic and electrostatic interactions, as well as accelerated blood clotting. The sponge exhibited higher efficacy than commercial gauze and gelatin sponge in managing uncontrolled hemorrhage from heparinized rat tail amputation, liver superficial injury, and liver perforating wound models. In addition, the sponge exhibited favorable biodegradability and biocompatibility. These findings revealed that the developed sponge holds great potential as a novel hemostat for effectively managing uncontrolled coagulopathic hemorrhage from superficial and perforating wounds.

Investigation of Shape Memory Polyurethane Properties in Cold Programming Process Towards Its Applications.

Thermoresponsive shape memory polymers (SMPs) with the remarkable ability to remember a temporary shape and recover their original one using temperature have been gaining more and more attention in a wide range of applications. Traditionally, SMPs are investigated using a method named often "hot-programming", since they are heated above their glass transition temperature (Tg) and after that, reshaped and cooled below Tg to achieve and fix the desired configuration. Upon reheating, these materials return to their original shape. However, the heating of SMPs above their Tg during a thermomechanical cycle to trigger a change in their shape creates a temperature gradient within the material structure and causes significant thermal expansion of the polymer sample resulting in a reduction in its shape recovery property. These phenomena, in turn, limit the application fields of SMPs, in which fast actuation, dimensional stability and low thermal expansion coefficient are crucial. This paper aims at a comprehensive experimental investigation of thermoplastic polyurethane shape memory polymer (PU-SMP) using the cold programming approach, in which the deformation of the SMP into the programmed shape is conducted at temperatures below Tg. The PU-SMP glass transition temperature equals approximately 65 °C. Structural, mechanical and thermomechanical characterization was performed, and the results on the identification of functional properties of PU-SMPs in quite a large strain range beyond yield limit were obtained. The average shape fixity ratio of the PU-SMP at room temperature programming was found to be approximately 90%, while the average shape fixity ratio at 45 °C (Tg - 20 °C) was approximately 97%. Whereas, the average shape recovery ratio was 93% at room temperature programming and it was equal to approximately 90% at 45 °C. However, the results obtained using the traditional method, the so-called hot programming at 65 °C, indicate a higher shape fixity value of 98%, but a lower shape recovery of 90%. Thus, the obtained results confirmed good shape memory properties of the PU-SMPs at a large strain range at various temperatures. Furthermore, the experiments conducted at both temperatures below Tg demonstrated that cold programming can be successfully applied to PU-SMPs with a relatively high Tg. Knowledge of the PU-SMP shape memory and shape fixity properties, estimated without risk of material degradation, caused by heating above Tg, makes them attractive for various applications, e.g., in electronic components, aircraft or aerospace structures.

A shape memory cationized chitosan sponge loaded with thrombin for high-effective hemostasis and antibacterial activity.

This study presents a thrombin-loaded cationized chitosan (TCCS) sponge with highly effective hemostatic and antibacterial activity. The TCCS sponge, prepared using a multistep method, features a porous structure, favorable mechanical properties, excellent water absorption ability, and shape recovery triggered by water or blood. The TCCS sponge exhibited strong antibacterial activity against Methicillin-resistant Staphylococcus aureus and Escherichia coli. Additionally, it demonstrated enhanced procoagulant and hemostatic efficacy in rat tail amputation and rat liver perforation wound models compared to commercial hemostats. Furthermore, the sponge exhibited favorable biocompatibility and biosafety. These findings suggest that the TCCS sponge has substantial potential for practical applications in managing severe hemorrhages and bacterial infections.

Synthesis and characterization of thermosensitive 2-hydroxypropyl-trimethylammonium chitin and its antibacterial sponge for noncompressible hemostasis and tissue regeneration.

Noncompressible hemorrhage is a leading cause of preventable death in battlefield/civilian trauma. The development of novel injectable and biodegradable hemostatic sponges, with rapid shape recovery and excellent antibacterial activity that can control hemorrhage in noncompressible bleeding sites and promote in situ tissue regeneration is still urgently needed. In this study, thermo/pH sensitive 2-hydroxypropyl-trimethylammonium chitins (QCHs) with low degree of quaternization substitution (DS: 0.07-0.23) and high degree of acetylation (DA: 0.91-0.94) were synthesized homogeneously for the first time. Their chemical compositions including DS and DA were characterized accurately by proton NMR for the first time. High strength QCH based sponges with good water/blood absorbency, rapid shape recovery and good antibacterial activity were prepared without using any crosslinkers but only due to their thermosensitive property, since they are soluble at low temperature but insoluble at high temperature. Compared with commercial products, the QCH sponges with cationic groups had the stronger pro-coagulant ability, better hemostatic effect in normal/heparinized liver perforation and femoral artery models in rats and porcine subclavian arteriovenous resection model. Moreover, the porous structure and biodegradability of the QCH sponges could promote in situ tissue regeneration. Overall, the QCH sponges show great clinical translational potential for noncompressible hemorrhage and tissue regeneration.

Functionalized TMC and ε-CL elastomers with shape memory and self-healing properties.

Introduction: Smart elastomers, which possess self-healing and shape memory capabilities, have immense potential in the field of biomedical applications. Polycarbonates and polyesters have gained widespread interest due to their remarkable biocompatibility over the last century. Nevertheless, the lack of functional versatility in conventional polyesters and polycarbonates means that they fall short of meeting the ever-evolving demands of the future. Methods: This paper introduced a new smart elastomer, named mPEG43-b-(PMBC-co-PCL)n, developed from polyester and polycarbonate blends, that possessed shape memory and self-heal capabilities via a physical crosslinking system. Results: The material demonstrated a significant tensile strength of 0.38 MPa and a tensile ratio of 1155.6%, highlighting its favorable mechanical properties. In addition, a conspicuous shape retrieval rate of 93% was showcased within 32.5 seconds at 37°C. Remarkably, the affected area could be repaired proficiently with no irritation experienced during 6h at room temperature, which was indicative of an admirable repair percentage of 87.6%. Furthermore, these features could be precisely modified by altering the proportion of MBC and ε-CL to suit individual constraints. Discussion: This innovative elastomer with exceptional shape memory and self-heal capabilities provides a solid basis and promising potential for the development of self-contracting intelligent surgical sutures in the biomedical field.

Two-Pronged Approach: Synergistic Tuning of the Surface and Carbon Core to Achieve Yellow Emission in Lignin-Based Carbon Dots.

In this study, yellow emissive lignin-based carbon dots (Y-CDs) were successfully prepared through a synergistic approach to adjust its surface and carbon core states. The lignin was initially effectively oxidized and carboxymethylated to impart abundant -COOH onto the precursor, which eventually adjusts the surface state of the CDs. Subsequently, α-naphthol was employed during the solvothermal treatment of lignin with the aim of elevating the sp2 domain content in the CDs and, thus, adjusting its carbon core state. The obtained Y-CDs possessed abundant carboxyl groups and nanoscale spherical shape with an average diameter of 5.21 nm. Meanwhile, the energy gap of Y-CDs was 2.46 eV and the optimal emission wavelength was 561 nm under the excitation wavelength of 410 nm. Synergistic adjusting carbon core and surface of the Y-CDs would alter the surface charge distribution and promote the delocalization of π electrons, and thus lead to a red shifting with the emission wavelength of 154 nm. Furthermore, a shape memory film with excellent recovery performance and fluorescent properties was designed by embedding the Y-CDs into polyvinyl alcohol (PVA) polymer. The incorporation of Y-CDs could impart the film with considerable high-value applications in the fields of intelligent sensing, biomedicine, and tissue engineering.

Implantable and in-vivo shape-recoverable nanocellulose-hyaluronic acid composite hydrogel.

Hydrogels have been used as a filling material in medical cosmetology, but current injection hydrogels have poor shaping ability due to its fluidity, while the hydrogels with fixed shape are easy to cause large wound size, resulting in rarely used in clinical practice. An implantable and in-vivo shape-recoverable hyaluronic acid (HA) based hydrogel is developed for tissue filling. In this work, complexes were made by hydrogen bonding between two natural polysaccharides: HA and TEMPO-oxidation cellulose nano-fiber. The elastic modulus of the HA/TOCN physical crosslinking hydrogel was maintained at 2500 G' in Pa, while, when ethylene glycol diglycidyl ether was introduced in the hydrogel, the elastic modulus could reach 60,000 G' in Pa. The volume of shrunk hydrogel reduced 80 ± 6 % of initial state, importantly, it can recover the shape in vivo inducing by extracellular moisture environment. Facts have proved that these shape recovery hydrogels were non-toxic to mammalian cells.

Sustainable wheat gluten foams with self-expansion and water/blood-triggered shape recovery.

A cheap and easily obtainable wheat gluten (WG) was used to fabricate bio-foams via a simple method of stirring, heating, and lyophilization. The foam possesses a 3D layered porous structure with interconnected channels, and the biofoam has excellent mechanical properties through glycerol plasticization and glutaraldehyde (GA) cross-linking. The water absorption and volume expansion rate can reach 793.67 ∼ 918.45% and 201.47 ∼ 239.53% respectively. In dry state, the foams had good compression resilience, and can basically recover its original shape after withstanding 60% compression strain for about 7 h. In wet state, they can withstand 10 cycles of compression test, and had good compressive resilience and durability; they also had fast liquid-triggered shape recovery performance, of which the foams can reabsorb liquid, expand, and recover its original shape within 40 seconds after withstanding 80% compression strain. In addition, The hemolysis rates of red blood cells treated with 1, 3, and 5 mg/mL of 14WG-20g-5GA foam suspension were 0.53 ± 0.12%, 2.12 ± 0.34%, and 3.97 ± 0.21%, respectively, all of which were below the permissible range for biological materials (<5%). The above-mentioned advantages made the sustainable foams be potentially useful for medical dressings, especially for the treatment of non-compressible haemorrhaging, which offered a new field of application for WG protein and its added value was also increased obviously.

Printing Parameters of Fused Filament Fabrication Affect Key Properties of Four-Dimensional Printed Shape-Memory Polymers.

Extrusion-based (fused filament fabrication) three-dimensional (3D) printing of shape-memory polymers (SMPs) has the potential to rapidly produce highly customized smart-material parts. Yet, the effects of printing parameters on the shape-memory properties of printed SMPs remain poorly understood. To study the extent to which the 3D printing process affects the shape-memory properties of a printed SMP part, here temperature, extrusion rate multiplier, and fiber orientation were systematically varied, and their effect on shape-memory fixing and recovery ratios was evaluated. Fiber orientation, as determined by print path relative to the direction(s) of loading during shape-memory programming, was found to significantly impact the fixing ratio and the recovery ratio. Temperature and multiplier had little effect on either fixing ratio or recovery ratio. To facilitate the use of printed SMP parts in biomedical applications, a cell viability assay was performed on 3D-printed samples prepared using varied temperature and multiplier. Reduction in multiplier was found to increase cell viability. The results indicate that fiber orientation can critically impact the shape-memory functionality of 3D-printed SMP parts, and that multiplier can affect cytocompatibility of those parts. Thus, researchers and manufacturers employing SMPs in 3D-printed parts and devices could achieve improved part functionality if print paths are designed to align fiber direction with the axis(es) in which strain will be programmed and recovered and if the multiplier is optimized in biomedical applications in which a part will contact cells.