What are the ideal screw lengths in volar locking plate fixation for distal radius fractures?

PURPOSE: This study aimed to specify the optimal lengths of the distal locking screws (in a female population undergoing distal radius fracture fixation with a volar locking plate) to avoid damaging the dorsal extensor tendon compartments while preserving stability. METHODS: Twenty-five female adult patients underwent volar locking plate fixation with four 2.4 mm locking screws inserted distally. Our modified dorsal tangential fluoroscopic view (DTV) was taken perioperatively followed by postoperative CT scans to compare the accuracy in determining the distal screw lengths. RESULTS: Our modified DTV was 88 %, 84 %, 88 %, and 76 % sensitive in detecting screw lengths in the first, second, third, and fourth distal plate holes, respectively. According to the CT scans, none of the screws were over-penetrated in the third dorsal compartment, over-penetration was found in the second and fourth dorsal compartment. The most-accurate screw lengths in the four most distal plate holes in female distal radius fracture are 14, 20, 20, and 20 mm from the radial to the ulnar aspect. CONCLUSION: In dorsal cortex comminution, when perioperative measuring is imprecise, inserting the most-suitable distal locking screw for problematic hole and then applying our modified DTV seems to be a simpler and safer option (Tab. 3, Fig. 4, Ref. 33).

Distal radius fluoroscopic skyline view: extension-supination versus flexion-supination.

The aim of our study was to compare the vertical fluoroscopic view of the wrist in extension and supination (ES) to the view in flexion and supination (FS) and determine which of the two views allowed the best visualization of four selected anatomical landmarks SDLR (radial styloid, dorsal radius cortex, Lister's tubercle and distal radioulnar joint). Our case series included 50 patients who had suffered a distal radius fracture and undergone an open reduction and internal fixation procedure with a volar locking plate. For each case, two fluoroscopic views were taken: ES (wrist extension and supination) (group I) and FS (wrist flexion and supination) (group II). Ten observers had to recognize the SDLR anatomical landmarks on 100 fluoroscopic skyline views (time 1) and 15 days later (time 2). The rate of recognition of the four anatomical landmarks was 78% in group I and 66% in group II (p < 0.001). The concordance rate of recognition of the four anatomical landmarks was mediocre (κ = 0.411). In conclusion, the vertical fluoroscopic skyline view in wrist extension and supination seems to be the most adequate view to assess the quality of the fracture reduction, the distal radioulnar joint and the length of the screws in open reduction and internal fixation of distal radius fractures with volar locking plates.

Simple surgical technique for minimizing the risk of extensor pollicis longus rupture following volar plate fixation of distal radial fracture: A case report.

INTRODUCTION AND IMPORTANCE: Extensor pollicis longus (EPL) tendon injury is a major complication in distal radial fracture repair. The risk factors for EPL tendon injury are prominent dorsal screws, direct intraoperative damage through drilling, and/or dorsal roof fragments. Herein, we introduce a simple technique to minimize the risk of EPL tendon rupture after volar plate fixation of distal radial fracture. CASE PRESENTATION: The patient was a 67-year-old woman with an intra-articular unstable distal radial fracture treated by volar locking plate fixation. Intraoperatively, we opened the third compartment after screw fixation. Because the screw had penetrated the floor of the third compartment, we moved the EPL tendon out of its groove and closed the third compartment by suturing the retinaculum. We confirmed that the EPL tendon was intact 7 years postoperatively, even though the screw was prominent in the third compartment. CLINICAL DISCUSSION: After volar plate fixation of the distal radial fracture, we partially open the third compartment through an approximately 2-cm-long incision on the ulnar side of Lister's tubercle. If the screw is prominent in the third compartment, we completely open the third compartment, take the EPL tendon out of its groove, and close the compartment by suturing the retinaculum. Our method was proved useful because the EPL tendon has remained intact for 7 years with the screw protruding into the third compartment. CONCLUSION: Our surgical technique is useful to prevent secondary EPL tendon rupture after distal radial plate fixation.

Detection of dorsal screw penetration during volar plating of the distal radius fractures: A comparison of different fluoroscopic views and screw sizes.

OBJECTIVE: The objective of this study was to compare different screw lengths combined with different fluoroscopic views to detect intraoperative dorsal screw penetration in distal radius fractures treated with volar locked plating. MATERIAL AND METHODS: From April 2014 to October 2018, one hundred and eighty patients were included. We divided the patients into four groups. Intraoperative AP and lateral views were taken and sizes of the screws were chosen based on actual measurement (Group A, 45 patients). AP, lateral and tangential views were taken and sizes of the screws were also chosen based on actual measurement (Group B, 45 patients). Intraoperative AP and lateral views were taken and the selected screws were 2mm shorter than actual measurement (Group C, 45 patients). AP, lateral and tangential views were taken and the selected screws were 2mm shorter than actual measurement (Group D, 45 patients). Prominent screws were changed intraoperatively according to each view. A computed tomography (CT) was taken postoperatively to identify residual prominent screws. RESULTS: The number of dorsally prominent screws exceeding 1mm was 6 of 301 in Group A (2.0%), 15 of 290 (5.2%) in Group B, 2 of 289 in Group C (0.7%), and 2 of 282 (0.7%) in Group D. All these prominent screws (25 screws) were exchanged for shorter screws during surgery. Group A and Group B had significant difference in detecting intraoperative dorsal screw penetration (p<0.05). Group C and Group D had no significant difference in detecting intraoperative dorsal screw penetration (p>0.05). Postoperative CT identified 12 additional prominent screws with≥1mm dorsal penetration in Group A, 2 screws in Group B, 1 screw in Group C and 0 screw in Group B respectively. Significant difference was found between Group A and Group B of CT results (p<0.05) while no statistical difference was found between Group C and Group D of CT results (p>0.05). DISCUSSIONS: Tangential view helped identify screw penetration. If tangential view was not available intraoperatively, screw penetration could also be avoided by downsizing the distal locking screw by 2mm shorter than actual measurement.

Influence of training on dorsal tangential radiographic view to detect screw protrusion after anterior plating of the distal radius: a cadaveric study.

In this cadaveric study of anterior plating of the distal radius, we aimed to determine the interobserver agreement and diagnostic performance for detecting dorsally protruding screws using the dorsal tangential radiographic view before and after specific training. Without prior instruction, 13 observers interpreted the dorsal tangential view of cadaveric specimens, in which anterior radial plates were placed. After seeing a training video on the dorsal tangential view, they repeated the task. Though we found that accuracy and interobserver agreement was lower than described in some other clinical series, training led to statistically significant improvements of (1) the interobserver agreement on the decision to exchange screws, (2) the self-confidence of the surgeon in obtaining adequate views, and (3) the number of fluoroscopic images required to obtain these views. After training, the number of protruding screws missed was reduced by 36%, but 7% of dorsally protruding screws was still missed.

Diagnosis of dorsal screw penetration after volar plating of a distal radial fracture.

AIMS: The aim of this study was to investigate whether intraoperative 3D fluoroscopic imaging outperforms dorsal tangential views in the detection of dorsal cortex screw penetration after volar plating of an intra-articular distal radial fracture, as identified on postoperative CT imaging. METHODS: A total of 165 prospectively enrolled patients who underwent volar plating for an intra-articular distal radial fracture were retrospectively evaluated to study three intraoperative imaging protocols: 1) standard 2D fluoroscopic imaging with anteroposterior (AP) and elevated lateral images (n = 55); 2) 2D fluoroscopic imaging with AP, lateral, and dorsal tangential views images (n = 50); and 3) 3D fluoroscopy (n = 60). Multiplanar reconstructions of postoperative CT scans served as the reference standard. RESULTS: In order to detect dorsal screw penetration, the sensitivity of dorsal tangential views was 39% with a negative predictive value (NPV) of 91% and an accuracy of 91%; compared with a sensitivity of 25% for 3D fluoroscopy with a NPV of 93% and an accuracy of 93%. On the postoperative CT scans, we found penetrating screws in: 1) 40% of patients in the 2D fluoroscopy group; 2) in 32% of those in the 2D fluoroscopy group with AP, lateral, and dorsal tangential views; and 3) in 25% of patients in the 3D fluoroscopy group. In all three groups, the second compartment was prone to penetration, while the postoperative incidence decreased when more advanced imaging was used. There were no penetrating screws in the third compartment (extensor pollicis longus groove) in the 3D fluoroscopy groups, and one in the dorsal tangential views group. CONCLUSION: Advanced intraoperative imaging helps to identify screws which have penetrated the dorsal compartments of the wrist. However, based on diagnostic performance characteristics, one cannot conclude that 3D fluoroscopy outperforms dorsal tangential views when used for this purpose. Dorsal tangential views are sufficiently accurate to detect dorsal screw penetration, and arguably more efficacious than 3D fluoroscopy. Cite this article: Bone Joint J 2020;102-B(7):874-880.

Volar plating in distal radius fractures: A prospective clinical study on efficacy of dorsal tangential views to avoid screw penetration.

PURPOSE: The purpose of this prospective cohort study of patients treated with volar plating for distal radius fractures is to evaluate the efficacy (defined as detection rate, or the ability to detect dorsally protruding screws) of additional dorsal tangential views (DTV) after obtaining standard anteroposterior (AP) and elevated lateral views by evaluating the change in intraoperative strategy in 100 patients. MATERIALS AND METHODS: 100 patients aged 18 years and older undergoing volar plating for acute extra- or intra- articular distal radius fractures were prospectively enrolled. Intraoperative fluoroscopy views, including AP, elevated lateral and DTV were obtained. Intraoperative -screw- revision frequency for dorsal screw protrusion, screw position relative to volar plate and to dorsal compartment, and screw lengths were evaluated. RESULTS: Additional DTV led to a change of intraoperative management in 31 of 100 (31%) of patients. A total of 35 out of 504 screws (6.9%) were changed. Screws in the two most radial screws in the plate were at the highest risk of being revised; 16 (46%) screws in most radial position and nine (26%) screws in the 2nd from radial position were revised. Furthermore, five (14%) screws in both the 2nd from ulnar and most ulnar screw holes were revised after DTV. No screws were revised in the central hole. The median length of revised protruding screws was 22 mm (range, 12-26 mm), and these were changed to a mean length of 20  mm (range, 10-22 mm). CONCLUSION: In this prospective series of 100 patients, obtaining additional DTV is found to be efficacious as it led to change in intraoperative strategy in one-third of patients. We concur with previous pilot studies that DTV, after obtaining conventional AP and elevated lateral views, is advised to avoid dorsally protruding screws, which could minimise the potential for iatrogenic extensor tendon rupture after volar plating for distal radius fractures. Diagnostic accuracy of DTV is subject of a subsequent prospective cohort study with post-operative CT to serve as the reference standard. LEVEL OF EVIDENCE: .Prognostic I.

In vivo confirmation of the reliability of the dorsal tangential view of the wrist.

The purpose of the study was to evaluate the reliability of the dorsal tangential view (DTV) of the wrist using direct visualization of the extensor compartments in vivo. Twelve patients with extensor tendon complications [nine patients with extensor synovitis, two patients with isolated extensor pollicis longus (EPL) rupture, one patient with EPL and extensor indicis proprius rupture] after volar plating of a distal radius fracture were enrolled in the study. We obtained DTVs in the operating room before implant removal and explored the extensor compartments during synovectomy or tendon reconstruction to confirm suspected screw penetration. We confirmed screw penetration on 10 patients during exploration of the extensor compartments. DTV was able to detect seven of these dorsal cortex breaches. There were no false positive results, which we had defined as a screw penetrating an extensor compartment preoperatively, but not visible on the DTV. Of these seven breaches, one was in the second compartment, four were in the third compartment, and the remaining two were in the fourth compartment. The DTV is sufficiently reliable to be used routinely to reduce postoperative extensor tendon complications during volar plating of the distal radius. LEVEL OF EVIDENCE: 4 (case series) diagnostic.

Detections of Screw Penetration during Volar Plating for Distal Radius Fractures.

Background We evaluated the detection for screw penetration on the dorsal cortex of the radius in serial oblique, dorsal tangential, and radial groove radiographic views in volar plating fixation. Materials and Methods Eight screw positions were set in each of the four cadaveric radii. Screw 1 was placed in the styloid subregion, whereas screws 2 and 3 were placed just proximal to the styloid and were defined for the radial region of the radius. Screws 4 (distal to the extensor pollicis longus [EPL] groove), 5 (the distal half of the groove), and 6 (the proximal half of the groove) were placed in the central region of the radius. Screws 7 (just medial to the groove) and 8 (sigmoid notch subregion) were positioned in the ulnar region of the radius. The screws were overlengthened by 1 and 2 mm and were evaluated in three radiographic views. Results Penetrations in the radial region were fully visible in supinated oblique views with 1- and 2-mm overlengthened screws. The penetration of screw 4 was clearly observable over a considerable range of views. However, the 1-mm penetration of screw 5 was not detectable at any angle of projection. Detection of the ulnar region screw was the most difficult among the three regions with oblique views. In the dorsal tangential view, the 1-mm penetration of screw 4 was not observed in any of the four radii, but the penetration of screw 5 was detectable in all the radii. The screws 2, 3, 5, 7, and 8 were readily detectable. The screw 4 was barely seen in the radial groove view, while the screws 5 and 6 were readily detectable. Conclusion/Clinical Relevance Appropriate combinations of these well-known radiological views are essential for the overall detection of penetrated screws during plating in distal radius fractures.

Osteochondroma of the Rib: a rare radiological apeareance.

INTRODUCTION: Osteochondromas (exostosis) are the most common neoplasm of bone and arise from the metaphysis of bones. Tumors of the chest wall comprise approximately 2% of all tumors of the body and may be primary or metastatic, benign or malignant. Osteochondroma is a common bone tumor but a rare tumor in the rib. It is often asymptomatic and observed incidentally. The tumors typically begin to grow before puberty and continue until bone maturation is reached. Surgery is required in childhood if these lesions are painful or disfiguring, while those arising in adulthood should always be resected. CASE REPORT: 9 yr old boy presented to OPD with swelling over right chest. Radiograph showed bony outgrowth on the lateral aspect of the 6th rib. The patient was kept under closed observation and was treated conservatively. Three years follow-up didn't show any increase in the size of the swelling and the patient did not have any complaints. CONCLUSION: Though various studies have shown that the surgical resection of osteochondroma is necessary to avoid further complications of Haemothorax, pneumothorax or intercostal neuralgia, we concluded that osteochondroma of the ribs can even be conserved if not associated with complications and patient does not need to undergo unnecessary surgery.