MXene-Deposited Melamine Foam-Based Iontronic Pressure Sensors for Wearable Electronics and Smart Numpads.

Iontronic pressure sensors hold significant potential to emerge as vital components in the field of flexible and wearable electronics, addressing a variety of applications spanning wearable technology, health monitoring systems, and human-machine interactions. This study introduces a novel iontronic pressure sensor structure based on a seamlessly deposited Ti3C2Tx MXene layer onto highly porous melamine foam as parallel plate electrodes and an ionically conductive electrolyte of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/thermoplastic polyurethane coupled with carbon cloth as current collecting layers for improved sensitivity and high mechanical stability of more than 7000 cycles. MXene-deposited melamine foam-based iontronic pressure sensors (MIPS) showed a high sensitivity of 5.067 kPa-1 in the range of 45-60 kPa and a fast response/recovery time of 28/18 ms, respectively. The high sensitivity, high mechanical stability, and fast response/recovery time of the designed sensor make them highly promising candidates for real-time body motion monitoring. Moreover, sensors are employed as a smart numpad for integration into advanced ATM security systems utilizing machine learning algorithms. This research marks a significant advance in iontronic pressure sensor technology, offering promising avenues for application in wearable electronics and security systems.

Hollow-like three-dimensional structure of methyl orange-delaminated Ti3C2 MXene nanocomposite for high-performance electrochemical sensing of tryptophan.

Tryptophan(Trp) is being explored as a potential biomarker for various diseases associated with decreased tryptophan levels; however, metabolomic methods are expensive and time-consuming and require extensive sample analysis, making them urgently needed for trace detection. To exploit the properties of Ti3C2 MXenes a rational porous methyl orange (MO)-delaminated Ti3C2 MXene was prepared via a facile mixing process for the electrocatalytic oxidation of Trp. The hollow-like 3D structure with a more open structure and the synergistic effect of MO and conductive Ti3C2 MXene enhanced its electrochemical catalytic capability toward Trp biosensing. More importantly, MO can stabilize Ti3C2 MXene nanosheets through noncovalent π-π interactions and hydrogen bonding. Compared with covalent attachment, these non-covalent interactions preserve the electronic conductivity of the Ti3C2 MXene nanosheets. Finally, the addition of MO-derived nitrogen (N) and sulfur (S) atoms to Ti3C2 MXene enhanced the electronegativity and improved its affinity for specific molecules, resulting in high-performance electrocatalytic activity. The proposed biosensor exhibited a wide linear response in concentration ranges of 0.01-0.3 µM and 0.5-120 µM, with a low detection limit of 15 nM for tryptophan detection, and high anti-interference ability in complex media of human urine and egg white matrices. The exceptional abilities of the MO/Ti3C2 nanocatalyst make it a promising electrode material for the detection of important biomolecules.

Efficient Hydrogen Generation from Ammonia Borane Hydrolysis on a Tandem Ruthenium-Platinum-Titanium Catalyst.

Hydrolysis of ammonia borane (NH3BH3, AB) involves multiple undefined steps and complex adsorption and activation, so single or dual sites are not enough to rapidly achieve the multi-step catalytic processes. Designing multi-site catalysts is necessary to enhance the catalytic performance of AB hydrolysis reactions but revealing the matching reaction mechanisms of AB hydrolysis is a great challenge. In this work, we propose to construct RuPt-Ti multi-site catalysts to clarify the multi-site tandem activation mechanism of AB hydrolysis. Experimental and theoretical studies reveal that the multi-site tandem mode can respectively promote the activation of NH3BH3 and H2O molecules on the Ru and Pt sites as well as facilitate the fast transfer of *H and the desorption of H2 on Ti sites at the same time. RuPt-Ti multi-site catalysts exhibit the highest turnover frequency (TOF) of 1293 min-1 for AB hydrolysis reaction, outperforming the single-site Ru, dual-site RuPt and Ru-Ti catalysts. This study proposes a multi-site tandem concept for accelerating the dehydrogenation of hydrogen storage material, aiming to contribute to the development of cleaner, low-carbon, and high-performance hydrogen production systems.

Tungsten-based polyoxometalate nanoclusters with remarkable reactive oxygen species-scavenging activity efficiently quenched luminol-based electrochemiluminescence for sensitive detection of Her-2.

This study aimed to develop a quenching-type electrochemiluminescence (ECL) immunosensor for human epidermal growth factor receptor (Her-2) detection. Firstly, Pd/NiFeOx nanoflowers decorated by in situ formation of gold nanoparticles (Au NPs) and 2D Ti3C2 MXene nanosheets were synthesized (AuPd/NiFeOx/Ti3C2) as carriers to load luminol and primary antibodies. Impressively, AuPd/NiFeOx/Ti3C2 with excellent peroxidase-like activity could accelerate the decomposition of the coreactant H2O2 generating more reactive oxygen species (ROSs) under the working potential from 0 to 0.8 V, resulting in highly efficient ECL emission at 435-nm wavelengths. The introduction of tungsten-based polyoxometalate nanoclusters (W-POM NCs) which exhibit remarkable ROSs-scavenging activity as secondary antibody labels could improve the sensitivity of immunosensors. The ZnO nanoflowers were employed to encapsulate minute-sized W-POM NCs, and polydopamine was self-polymerized on the surface of Zn(W-POM)O to anchor secondary antibodies. The mechanism of the quenching strategy was explored and it was found that W-POM NCs could consume ROSs by the redox reaction of W5+ resulting in W6+. The proposed ECL immunosensor displayed a wide linear response range of 0.1 pg·mL-1 to 50 ng·mL-1, and a low detection limit of 0.036 pg mL-1 (S/N = 3). The recoveries ranged from 93.9 to 99.4%, and the relative standard deviation (RSD) was lower than 10%. This finding is promising for the design of detecting new protein biomarkers.

High-Performance Detection of Exosomes Based on Synergistic Amplification of Amino-Functionalized Fe3O4 Nanoparticles and Two-Dimensional MXene Nanosheets.

Exosomes derived from cancer cells have been recognized as a promising biomarker for minimally invasive liquid biopsy. Herein, a novel sandwich-type biosensor was fabricated for highly sensitive detection of exosomes. Amino-functionalized Fe3O4 nanoparticles were synthesized as a sensing interface with a large surface area and rapid enrichment capacity, while two-dimensional MXene nanosheets were used as signal amplifiers with excellent electrical properties. Specifically, CD63 aptamer attached Fe3O4 nanoprobes capture the target exosomes. MXene nanosheets modified with epithelial cell adhesion molecule (EpCAM) aptamer were tethered on the electrode surface to enhance the quantification of exosomes captured with the detection of remaining protein sites. With such a design, the proposed biosensor showed a wide linear range from 102 particles µL-1 to 107 particles µL-1 for sensing 4T1 exosomes, with a low detection limit of 43 particles µL-1. In addition, this sensing platform can determine four different tumor cell types (4T1, Hela, HepG2, and A549) using surface proteins corresponding to aptamers 1 and 2 (CD63 and EpCAM) and showcases good specificity in serum samples. These preliminary results demonstrate the feasibility of establishing a sensitive, accurate, and inexpensive electrochemical sensor for detecting exosome concentrations and species. Moreover, they provide a significant reference for exosome applications in clinical settings, such as liquid biopsy and early cancer diagnosis.

Multifunctional Au Modified Ti3C2-MXene for Photothermal/Enzyme Dynamic/Immune Synergistic Therapy.

Ti3C2-MXene-based composites provide multifunctional interfaces in diagnosis and treatment of tumors. Herein, we proposed a multifunctional nanoplatform based on Ti3C2-MXene-Au nanocomposites, which combines photothermal properties and peroxidase-like activity, accomplishing synergistic photothermal therapy (PTT) and enzyme dynamic therapy (EDT) accompanied by photoacoustic (PA) and thermal dual-mode imaging in vivo. Furthermore, PTT induces immunogenic cell death, and EDT promotes cell apoptosis, facilitating dendritic cell (DC) maturation and T cell infiltration into the tumor. On this basis, the antibody OX40 (αOX40) was utilized to further contribute immune therapy for reversing the immunosuppressive tumor microenvironment by activating CD4+ and CD8+ T cells. In summary, a triune of PTT/EDT/antitumor immune therapy is achieved by combining Ti3C2-MXene-Au nanocomposites and αOX40, which possesses several strong features of good biocompatibility, NIR-controlled targeting, significant cancer cell killing, and satisfactory biosafety in vitro and in vivo. Our work might highlight the promising application of MXene-based nanoplatforms for cancer therapy.

Few Layer Ti3C2 MXene-Based Label-Free Aptasensor for Ultrasensitive Determination of Chloramphenicol in Milk.

Quantitative detection of veterinary drug residues in animal-derived food is of great significance. In this work, a simple and label-free electrochemical aptasensor for the highly sensitive detection of chloramphenicol (CAP) in milk was successfully developed based on a new biosensing method, where the single- or few-layer Ti3C2 MXene nanosheets functionalized via the specific aptamer by self-assembly were used as electrode modifiers for a glassy carbon electrode (aptamer/Ti3C2 MXene/GCE). Differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), scanning electron microscopy (SEM), atomic force microscope (AFM), and so on were utilized for electrochemical and morphological characterization. Under the optimized conditions, the constructed aptasensor exhibited excellent performance with a wider linearity to CAP in the range from 10 fM to 1 µM and a low detection limit of 1 fM. Aptamer/Ti3C2 MXene/GCE demonstrated remarkable selectivity over other potentially interfering antibiotics, as well as exceptional reproducibility and stability. In addition, the aptasensor was successfully applied to determine CAP in milk with acceptable recovery values of 96.13% to 108.15% and relative standard deviations below 9%. Therefore, the proposed electrochemical aptasensor is an excellent alternative for determining CAP in food samples.

Enhancing Lithium-Sulfur Battery Performance by MXene, Graphene, and Ionic Liquids: A DFT Investigation.

The efficacy of lithium-sulfur (Li-S) batteries crucially hinges on the sulfur immobilization process, representing a pivotal avenue for bolstering their operational efficiency and durability. This dissertation primarily tackles the formidable challenge posed by the high solubility of polysulfides in electrolyte solutions. Quantum chemical computations were leveraged to scrutinize the interactions of MXene materials, graphene (Gr) oxide, and ionic liquids with polysulfides, yielding pivotal binding energy metrics. Comparative assessments were conducted with the objective of pinpointing MXene materials, with a specific focus on d-Ti3C2 materials, evincing augmented binding energies with polysulfides and ionic liquids demonstrating diminished binding energies. Moreover, a diverse array of Gr oxide materials was evaluated for their adsorption capabilities. Scrutiny of the computational outcomes unveiled an augmentation in the solubility of selectively screened d-Ti3C2 MXene and ionic liquids-vis à vis one or more of the five polysulfides. Therefore, the analysis encompasses an in-depth comparative assessment of the stability of polysulfide adsorption by d-Ti3C2 MXene materials, Gr oxide materials, and ionic liquids across diverse ranges.

Crystal Facet Engineering of MXene-Derived TiN Nanoflakes as Efficient Bidirectional Electrocatalyst for Advanced Lithium-Sulfur Batteries.

The design of nanomaterials with grain orientation structure by crystal facet engineering is of great significance for boosting the catalytic ability and electrochemical properties, but the controllable synthesis is still a challenge. Here, TiN nanoflakes with exposed (001) facets are prepared using 2D Ti3 C2 MXene as the initial reactant and applied as a bidirectional electrocatalyst for the reduction and oxidation process in lithium-sulfur batteries (LSBs). The (001) facet-dominated TiN nanoflakes have a strong adsorption capacity for soluble lithium polysulfides (LiPSs). More importantly, theoretical calculations and experiment results confirm the (001) facet-dominated TiN nanoflakes catalyze the conversion of soluble LiPSs to Li2 S2 /Li2 S to induce the Li2 S uniform deposition in the discharge process and decrease the delithiation barrier of Li2 S in the charge process. Therefore, the excellent electrochemical properties of LSBs are achieved, which demonstrates a high discharge capacity of 949 mAh g-1 at 1 C and maintains high capacity reversibility with a decay rate of 0.033% per cycle after 800 cycles.

A Ti3C2-MXene-functionalized LRSPR biosensor based on sandwich amplification for human IgG detection.

Long-range surface plasmon resonance (LRSPR) has demonstrated excellent performance in sensing and detection, due to its higher accuracy and sensitivity compared with conventional surface plasmon resonance (cSPR). In this work, we establish an LRSPR biosensor which employs PDA/Ti3C2-MXene/PDA-gold film as a sensing substrate and gold nanoparticles (AuNPs) as enhancers. Ti3C2-MXene is an emerging two-dimensional (2D) layered material which is used extensively in immunoassay and biosensing. The sensing substrate comprises two polydopamine (PDA) films between which is sandwiched a Ti3C2-MXene film based on a gold film, which provides a large surface area and abundant binding sites to rabbit anti-human IgG (Ab1). Sandwich amplification is adopted to enhance the sensitivity of the LRSPR biosensor, and AuNPs/staphylococcal protein A (SPA)/mouse anti-human IgG (Ab2) composites are introduced into the flow cell as enhancers after the immune binding of human IgG to Ab1. The antigen (human IgG) detection range is 0.075 µg mL-1 to 40 µg mL-1, and the limit of detection is almost 20 times lower than that for cSPR biosensors. This novel LRSPR biosensor demonstrates excellent performance in immune sensing over a broad detection range and a low limit of detection. Subsequent modification of the LRSPR sensing platform could be made for extensive application in various biological detection fields.

CdS/Ti3C2 heterostructure-based photoelectrochemical platform for sensitive and selective detection of trace amount of Cu2.

Photoelectrochemical (PEC) detection as a potential development strategy for Cu2+ ion sensor has arisen extensive attention. Herein, CdS/Ti3C2 heterostructure was synthesized by electrostatically driven assembly and hydrothermal method. On the basis of a CdS/Ti3C2 heterostructure, a novel anodic PEC sensing platform was constructed for highly sensitive detection of trace amount of Cu2+. Carrier transport at the interface of CdS/Ti3C2 heterostructure was tremendously improved, due to the generation of effective Schottky junctions. Under visible light irradiation, the CdS/Ti3C2 heterostructure-modified PEC platform exhibits great anode photocurrent signal, and the formation of CuxS reduces the PEC response with the presence of Cu2+ as a representative analyte. Thus, the linear response of Cu2+ ranges from 0.1 nM to 10 µM and the limits of detection (LOD, 0.05 nM) are obtained, which is lower than that of WHO's Guidelines for Drinking-water Quality (30 µM). This idea of component reconstitution provides a new paradigm for the design of advanced PEC sensors.

SnO2 quantum dots-functionalized Ti3C2 MXene nanosheets for electrochemical determination of dopamine in body fluids.

A novel SnO2 quantum dots (SnO2QDs)-functionalized Ti3C2 MXene nanocomposite was prepared via in situ synthesis method, resulting in well-regulated the nucleation and growth of SnO2QDs to evenly distribute onto MXene nanosheets. Ultra-small size SnO2QDs decorated on the surface of Ti3C2 MXene nanosheets can effectively prevent the restacking of MXene and remarkably increase the electroactive surface area of the electrode, which can further increase electrocatalytic activity toward dopamine. Then, an ultrasensitive electroanalytical method based on SnO2QDs-functionalized Ti3C2 MXene nanocomposite for dopamine monitoring was developed, and the effects of experimental condition were investigated systematically. Under optimized conditions, the prepared sensor presented a linear dependence for dopamine in the concentration range from 0.004 to 8.0 µM with the detection limit of 2.0 nM (S/N = 3). Moreover, it selectively perceived dopamine in presence of physiological interferents in urine and serum samples with excellent linearities (correlation coefficients higher than 0.9920). The relative recoveries were in the range 97.67-105.3% and 103.0-106.8%, while the limits of quantitation were 10.12 nM and 9.62 nM in urine and serum sample, respectively, demonstrating the method suitability for dopamine sensing and being envisioned as a promising candidate for neurotransmitter monitoring in biological diagnosis.

NIR-Activated Multimodal Photothermal/Chemodynamic/Magnetic Resonance Imaging Nanoplatform for Anticancer Therapy by Fe(II) Ions Doped MXenes (Fe-Ti3 C2 ).

2D MXene, Ti3 C2 (TC), has displayed enormous potential in applications in photothermal therapy (PTT), attributing to its biocompatibility and outstanding photothermal conversion capability. However, some tumor ablations are difficult to be realized completely by monotherapy due to the essential defects of monotherapy and intricate tumor microenvironment (TME). In this work, the appropriate doped Fe2+ ions are anchored into the layers of 2D ultrathin TC nanosheets (TC NSs) to synthesize a novel multifunctional nanoshell of Fe(II)-Ti3 C2 (FTC) through interlayer electrostatic adsorption. FTC possesses superior photothermal conversion efficiency (PTCE) than TC NSs, attributing to the enhanced conductivity promoted by interlaminar ferrous ion-channels. Moreover, Fenton reaction based on ferrous ions endows FTC the abilities of reactive oxide species (ROS) releasing and glutathione (GSH) suppression triggered by near-infrared (NIR) laser, featuring splendid biocompatibility and curative effect in hypoxic TME. Meanwhile, magnetic resonance imaging (MRI) responding in FTC reveals the potential as an integrated diagnosis and treatment nanoplatform. FTC could provide new insights into the development of multimoded synergistic nanoplatform for biological applications, especially breaking the shackles of MXenes merely used as a photo-thermal agent (PTA), adopting it to bioimaging sensor and drug loading.

Interlayered Forward Osmosis Membranes with Ti3C2Tx MXene and Carbon Nanotubes for Enhanced Municipal Wastewater Concentration.

Forward osmosis (FO) hybrid systems have the potential to simultaneously recover nutrients and water from wastewater. However, the lack of membranes with high permeability and selectivity has limited the development and scale-up of these hybrid systems. In this study, we fabricated a novel thin-film nanocomposite membrane featuring an interlayer of Ti3C2Tx MXene intercalated with carbon nanotubes (M/C-TFNi). Owing to the enhanced confinement effect on interfacial degassing and increased amine monomer sorption by the interlayer, the resulting M/C-TFNi FO membrane has a greater degree of cross-linking and roughness. In comparison with the thin-film composite (TFC) membrane without an interlayered structure, the M/C-TFNi membrane attained a water flux that was four times higher and a lower specific salt flux. Notably, the M/C-TFNi membrane exhibited excellent concentration efficiency for real municipal wastewater and enhanced rejection of ammonia nitrogen, which breaks the permeability-selectivity upper bound. This study provides a new avenue for the rational design and development of high-performance FO membranes for environmental applications.

Nitrogen, boron-doped Ti3C2 MXene quantum dot-based ratiometric fluorescence sensing platform for point-of-care testing of tetracycline using an enhanced antenna effect by Eu3.

The Ti3C2 MXene quantum dots (Ti3C2 MQDs) derived from Ti3C2 MXene have received much attention because of their remarkable advantages in biosensing. Nevertheless, the functionalization of Ti3C2 MQDs to improve their properties is just in its infant stage. Herein, we firstly synthesized nitrogen and boron co-doped Ti3C2 MQDs (N, B-Ti3C2 MQDs) with good water solubility, strong stability, and high optical characteristics. The N, B-Ti3C2 MQDs exhibit excitation wavelength-dependent blue photoluminescence with optimal excitation/emission peaks at 335/439 nm. Nowadays, the development of fast and real-time detection of tetracycline (TC) in animal derived food is very essential. In this work, a novel point-of-care testing (POCT) platform was established based on ratiometric fluorescence method using N, B-Ti3C2 MQDs coupled with Eu3+. Upon addition of TC in the Eu3+/N, B-MQDs system, blue fluorescence emission of N, B-Ti3C2 MQDs was quenched and red fluorescence emission of Eu3+ was enhanced gradually, which was ascribed to the synergistic inner filter effect and antenna effect. Moreover, we prepared test papers with N, B-Ti3C2 MQDs and Eu3+ for TC detection based on the change of fluorescence color, which could be recognized by color recognizer app installed in the smartphone. Therefore, great promise for POCT of TC is given with the merits of simplicity and visible detection possibility. The proposed method demonstrated a low detection limit of 20 nM. Application of the platform for TC quantification in milk samples opened a novel means for the potential use of N, B-Ti3C2 MQDs in food safety.

Facile microwave-assisted synthesis of Ti3C2 MXene quantum dots for ratiometric fluorescence detection of hypochlorite.

A dual-channel "naked-eye" colorimetric and ratio fluorescent probe has been developed based on titanium carbide quantum dots for the detection of curcumin and hypochlorite (ClO-). The fluorescence emission of Ti3C2 MXene quantum dots (Ti3C2 MQDs) is in the range 350-600 nm, and the maximum emission peak is at 430 nm that overlaps with the UV absorption of curcumin at 430 nm to a large extent. This facilitates the fluorescence resonance energy transfer (FRET) between Ti3C2 MQDs and curcumin. When ClO- is added, the phenolic and methoxy groups of curcumin are oxidized to quinones, resulting in the restoration of the fluorescence of Ti3C2 MQD. In addition, the probe designed makes it easier to distinguish colors with the naked eye to detect curcumin and ClO-. The linear detection range of curcumin was 0.05-10 µM, and the detection limit was 20 nM. The linear detection ranges of ClO- are 25-150 µM and 150-275 µM, and the detection limit is 5 µM. This study is the first report on the determination of curcumin and ClO- based on Ti3C2 MQDs by dual-channel "naked-eye" colorimetric and ratio fluorescence method.

Ultrasensitive dual-quenching electrochemiluminescence immunosensor for prostate specific antigen detection based on graphitic carbon nitride quantum dots as an emitter.

Early monitoring of prostate-specific antigen (PSA) is crucial in diagnosis and proactive treatment of prostate disease. Herein, a dual-quenching ternary ECL immunosensor was designed for PSA detection based on graphitic carbon nitride quantum dots (g-CNQDs, as an emitter), potassium persulfate (K2S2O8, as a coreactant), and silver nanoparticles doped multilayer Ti3C2 MXene hybrids (Ag@TCM, as a coreaction accelerator). First, Ag@TCM was immobilized on the surface of a glassy carbon electrode, then g-CNQDs was further adsorbed on Ag@TCM to acquire a higher initial ECL signal at a potential window from - 1.3 to 0.0 V (vs. Ag/AgCl). Ag@TCM not only acted as the coreaction accelerator, but also as a matrix to load enormous g-CNQDs and prostate-specific capture antibody via Ag-N bond. Meanwhile, prostate-specific detection antibody was marked by gold nanoparticles modified manganese dioxide as a dual-quenching probe (Ab2- Au@MnO2). When Ab2-Au@MnO2 was introduced into the ternary ECL system via sandwiched immuno-reaction, the high-sensitive detection of PSA was achieved by the dual-quenching effect, caused by the resonant energy transfer from g-CNQDs (energy donor) to Au@MnO2 (energy acceptor). As a result, this ECL immunosensor showed a good dynamic concentration range from 10 fg·mL-1 to 100 ng·mL-1 with a detection limit of 6.9 fg·mL-1 for PSA detection. The dual-quenching ECL strategy presented high stability and good specificity to open up a new pathway for ultrasensitive immunoassay.

ε-Poly-L-lysine-protected Ti3C2 MXene quantum dots with high quantum yield for fluorometric determination of cytochrome c and trypsin.

Titanium carbide quantum dots functionalized with ε-poly-L-lysine (PLL) were synthesized by sonication cutting and hydrothermal synthesis. The deprotonated Ti3C2 MXene quantum dots (Ti3C2 MQDs) exhibit excitation wavelength-dependent blue photoluminescence with typical excitation/emission peaks at 330/415 nm and a quantum yield of 22% due to strong quantum confinement. The fluorescence of ε-poly-L-lysine protected Ti3C2 MQDs (PLL-protected Ti3C2 MQDs) is reduced via an inner filter effect after the addition of cytochrome c (cyt-c). Response to cyt-c is linear in the 0.2 to 40 µM concentration range and the detection limit is 20.5 nM. In the presence of trypsin, cyt-c is hydrolyzed to small peptides, and the Fe3+ ion in cyt-c probably is reduced to Fe2+ with the aid of the digestive enzyme. This results in the restoration of the blue fluorescence of the modified MQDs. Fluorescence increases linearly in the 0.5 to 80 µg mL-1 trypsin concentration range with the detection limit of 0.1 µg mL-1. The method was successfully applied to the determination of cyt-c and trypsin in spiked serum samples. Graphical abstractSchematic of a method for the fluorometric "turn-off-on" determination of cytochrome c and trypsin based on ε-poly-L-lysine (PLL) protect MXene quantum dots (Ti3C2 MQDs).

Ti3C2 MXene-based nanozyme as coreaction accelerator for enhancing electrochemiluminescence of glucose biosensing.

Delamination of the exfoliated multilayer MXenes with electro-catalysts, not only leads to increasing surface area for high electrochemiluminescent (ECL) signal tracer loading but also provides highly sensitive achievements in a coreaction accelerator manner. To this end, herein, we used bromophenol blue (BPB)-delaminated multilayer Ti3C2 MXene as both a coreaction accelerator to promote the electrochemiluminescent (ECL) reaction rate of luminol (LUM) and the co-reactant H2O2 and a substrate for retaining high loading of glucose oxidase (GOx)-conjugated polyethylene imine (PEI) along with luminophore species into more open structure of Ti3C2 MXene for sensitive detection of glucose. In the presence of glucose, in situ generating H2O2 product through a GOx-catalyzed process could produce abundant •OH radicals via the peroxidase-like activity of the BPB@Ti3C2 in the LUM ECL reaction. Moreover, decreasing the distance between the high-content LUM into the BPB@Ti3C2 and the generated •OH, minimizes the decomposition of highly active •OH, providing a superb ECL signal. Last, the proximity of incorporated GOx into the delaminated Ti3C2 MXene near the electrode allows efficient electron transfer between the electrode and enzyme. The integration of such amplifying effects endowed high sensitivity and excellent selectivity for glucose with a low limit of detection of 0.02 µM in the wide range of 0.01 µM-40,000 µM, enabling the feasibility of the glucose analysis in human serum samples. Overall, the enhanced ECL based on the BPB@Ti3C2 opens a new horizon to develop highly sensitive MXene-based ECL toward the field of biosensors.

A novel iron oxide (Fe3O4)-laden titanium carbide (Ti3C2) MXene stacks for the efficient removal of tetracycline from aqueous solution.

Fe3O4 has the advantages of unique magnetic stability and low biological toxicity, which can improve pollutants separation efficiency. MXenes are two-dimensional materials and easy surface functionalization that can provide suitable carriers for Fe3O4. In this work, we synthesized magnetic MXene composites by a one-pot method that relies on doping Fe3O4 particles onto Ti3C2 MXene nanosheets by heat treatment. The Fe3O4/Ti3C2 MXene was analyzed by SEM, XRD, FTIR and XPS techniques, which showed that the material has good tetracycline (TC) removal properties and magnetic separation ability. The results showed that the adsorption capacity of it was 46.42 mg g-1, and the removal efficiency of 0.06 g adsorbent for 50 mL of 30 mg L-1 TC could reach 92.1% in a wide pH range of 4-10, when the adsorption temperature was 25 °C, and the adsorption time was 3 h. The adsorption data were consistent with Langmuir and the proposed second-order kinetic model, and the thermodynamic experiments confirmed that the adsorption of TC was a monolayer physicochemical adsorption coexisting heat-trapping process (ΔH = 15.72 kJ mol-1). In addition, the adsorption of TC by Fe3O4/Ti3C2 MXene was attributed to the synergistic effect of electrostatic attraction, hydrogen bonding and π-π packing. In conclusion, the saturation magnetization of Fe3O4/Ti3C2 MXene is 27.3 emu/g and it can not only be separated from water using its strong magnetic properties to avoid secondary contamination, but also can be used as a promising material to effectively remove antibiotics from aqueous media.