Volar fixed plating of distal radius fractures: optimizing plate position for enhanced clinical outcomes.

BACKGROUND: The precise influence of plate position on clinical outcomes in the context of volar fixed-angle plating for distal radius fractures is not fully understood. This article aims to investigate the influence of plate position on clinical results, and functional outcomes in patients treated with volar fixed plating for distal radius fractures. METHODS: A total of 58 patients with 64 distal radius fractures were included in the study. Patient demographics, fracture characteristics, surgical details, and radiographic data were collected. Post-operative AP and Lat views of all patients taken on the first day after surgery were evaluated. Volar Tilt, Radial Inclination and Radial Height measurements were used as reduction criteria. In the follow-up, the patients were called for their last control, flexion and extension angles of the wrist and Mayo Wrist Scores, the distance of the plate to the joint line and the angle between the plate and the radial shaft were measured and recorded. RESULTS: A total of 64 distal radius fractures, with a mean age of 46.9 years, and the mean follow-up period 24.9 months were included in this study. There was a significant relationship between the Radial Inclination and Plate-Shaft Angle variables and the Mayo Wrist Score at a 99% confidence interval. Additionally, a relationship was observed between the Radial Height variable and the Mayo Score at a 90% confidence interval. A significant positive association was observed between radial inclination and achieving a Good-to-Excellent Mayo score (OR = 1.28, 95% CI [1.08-1.51], p = 0.004). Plate distance to joint line demonstrated a marginally significant positive association with a Good-to-Excellent Mayo score (OR = 1.31, 95% CI [0.97-1.77], p = 0.077). Univariate analysis revealed a significant negative association between plate-shaft angle and achieving a Good-to-Excellent Mayo score (OR = 0.71, 95% CI [0.52-0.99], p = 0.045). This negative association remained statistically significant in the multivariate analysis (p = 0.016). CONCLUSION: Radial inclination, plate distance to joint line, and angle between plate and radius shaft were identified as significant factors associated with improved Mayo Wrist Scores.

Assessment of Ulnar Carpal Translocation and Carpal Alignment After Volar Plate Fixation With Vascularized Bone Graft for Scaphoid Waist Fracture Nonunions.

PURPOSE: Multiple fixation methods with or without vascularized graft have been described to treat scaphoid nonunions. This study aimed to assess the incidence of carpal malalignment and the degree of ulnar carpal translocation after scaphoid volar plate fixation with pedicled vascularized bone graft in scaphoid waist nonunions with humpback deformity. METHODS: A retrospective cohort study of individuals with recalcitrant scaphoid fracture nonunion treated with volar scaphoid plating and vascularized bone graft was analyzed. All patients had radiographs with the wrist at neutral with clinical follow-up of at least 3 months after surgery. Ulnar subluxation of the carpus was assessed by the change in lunate uncovering and carpal-radial distance before and after surgery. RESULTS: Seventeen patients were included for analysis. Average age was 26 years with an average follow-up interval of 11.0 months. After surgery, 16 patients (94.1%) had fracture union. Between preoperative and initial postoperative imaging, there was an increase in lunate uncovering (mean difference: 8.8%; 95% confidence interval, 4.6% to 13.1%) and carpal-radial distance (mean difference: 3.3% ulnar shift; 95% confidence interval, 1.1% to 5.4%). After surgery, there was minimal change in lunate uncovering and carpal-radial distance from immediately after surgery to final follow-up. CONCLUSIONS: Preoperative lunate uncovering was lower than normal values, suggesting an abnormal radial shift of the carpus with a collapsed scaphoid. Postoperative lunate uncovering was similar to normal values, reflecting an ulnar shift of the carpus after operative intervention. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Management of stable proximal interphalangeal joint volar plate injuries with figure-of-8 orthoses: A parallel-group randomized controlled trial.

BACKGROUND: Volar plate injuries of the proximal interphalangeal (PIP) finger joint are common. Conservative treatment involves orthoses to limit hyperextension at the PIP joint yet allow movement of the joints to prevent joint stiffness and deformity. Custom-made dorsal blocking orthoses are recommended treatments. Previous research also supports the use of a figure-of-8 orthosis, although the comparative effectiveness of these orthoses is not currently known. PURPOSE: This study aimed to compare the figure-of-8 orthosis and dorsal blocking orthosis for changes in the range of movement, pain, and function following stable volar plate PIP joint injuries and to compare the number of hand therapy appointments required. STUDY DESIGN: A parallel-group pilot randomized controlled trial. This trial was registered with the Australian and New Zealand Clinical Trials Registry (Trial ID: CTRN12619000449134). METHODS: Participants aged 13-65 years were recruited from an outpatient hand therapy service and randomly assigned to experimental or control groups. The experimental group of 20 participants received a custom-made thermoplastic figure-of-8 orthosis limiting the extension to 15-20 degrees. The control group of 22 participants had a dorsal blocking orthosis, which was serially extended by 10 degrees weekly starting at 30 degrees flexion. Participants were blinded to their group allocation. Outcome measures included range of movement, edema, pain, function, and number of hand therapy appointments. Data collection was completed by the treating therapist who was not blinded to group assignment. Data analysis included a series of mixed-model analyses of variance to examine changes over time. RESULTS: Forty-two participants were recruited and had their data analyzed. No significant between-group differences were observed for DIP flexion, PIP flexion, pain, and function from baseline to follow-up. Both groups exhibited significant improvements in these outcomes over time (p < 0.001); effect sizes ranged from small to large (0.28-0.79). On average, the intervention group required 4 (±1.5) appointments compared to 6 (±1.5) in the control group over the same period representing a significant difference (p < 0.001). CONCLUSIONS: Both dorsal blocking and figure-of-8 orthoses provide similar outcomes. The use of a figure-of-8 orthosis, or a dorsal block orthosis fabricated in maximal comfortable extension depending on severity, could reduce the number of appointments and increase convenience for patients.

Dorsal blocking orthoses for proximal interphalangeal joint volar plate injuries: A retrospective cohort study investigating the impact of joint angle on patient outcomes.

BACKGROUND: Injuries to the proximal interphalangeal joint (PIPJ) of the fingers are commonly treated in hand therapy departments. Conservative management for PIPJ volar plate injuries typically involves a dorsal blocking orthosis and flexion exercises. Historically hand therapists have placed the PIPJ in varying degrees of flexion but the optimal angle is unknown. PURPOSE: To compare the outcomes of two treatment groups who received dorsal blocking orthoses: Those who the orthosis was positioned in neutral compared to those in 25-30° of flexion. STUDY DESIGN: Retrospective cohort study. METHOD: Patients treated by the hand therapy service at a major metropolitan hospital network in Melbourne, Australia, for conservative management of a PIPJ volar plate injury over a three-year period were included in our study. Data regarding patient demographics, digits affected and injury type were collected. Outcomes included presence of a fixed flexion deformity (FFD), amount of hand therapy received and total active flexion at the PIPJ. RESULTS: One hundred and eleven participants were included in our study. The mean age was 26 and 59 (53%) were males. Seventy two (64%) participants received a dorsal blocking orthosis positioned in neutral and 39 (35%) were positioned in 25-30° flexion at the PIPJ. Participants whose orthosis was positioned at 25-30° had an average of 24 more minutes in hand therapy (which equates to approximately one appointment) compared to those whose PIPJ was positioned in neutral (p=0.006, d=0.5). Eight percent less participants developed a FFD (p = 0.24) and 13% more participants achieved full flexion (p = 0.06) in the group who received a dorsal blocking orthosis in neutral, however these results were not statistically significant. CONCLUSION: PIPJ volar plate injures treated in an orthosis positioned in neutral required fewer hand therapy appointments. There was no statistically significant difference between groups regarding development of a FFD or full flexion.

Pronator quadratus preserving versus pronator quadratus dissecting approaches in volar plate fixation of distal radius fractures: a systematic review of comparative studies.

PURPOSE: To compare pronator quadratus preserving (PQ-P) approaches with PQ dissecting (PQ-D) approaches in volar plate fixation of distal radius fractures (DRFs). METHODS: Three databases were searched on March 10th, 2024. The authors adhered to the PRISMA and R-AMSTAR guidelines and Cochrane Handbook for Systematic Reviews. Data on demographics, fracture classifications, patient reported outcome measures (PROMs), range of motion, radiographic parameters, and complications were extracted. RESULTS: Thirteen studies with a total of 1007 fractures were included. Two of three studies reported lower DASH scores in the PQ-P group between 6 weeks and 3 months postoperative, however no studies reported lower scores in the PQ-P group after 3 months. Three of three studies reported significantly lower VAS scores at 6 weeks postoperative, however no studies reported significant differences after 6 months. Only one of six studies reported significantly greater flexion, extension, and pronation in the PQ-P group. One of four studies reported greater radial deviation in the PQ-P group, while there were no differences in supination or ulnar deviation. One of ten and one of six studies reported greater volar tilt and ulnar variance or radial length, respectively, in the PQ-P group. CONCLUSION: There is not sufficient evidence supporting the utility of PQ-P approaches over conventional PQ-D approaches for volar plate fixation of DRFs, especially at long-term follow-ups (3+ months). There may be short term benefits with PQ-P approaches, specifically with regards to PROMs in the short-term (< 6 weeks), however there is limited high-quality evidence supporting these findings. LEVEL OF EVIDENCE: Level III.

The role of ultrasonography in diagnosing acute closed volar plate injury of proximal interphalangeal joint.

BACKGROUND: Acute closed volar plate injury of the proximal interphalangeal joint (PIP) is a common hand injury. In the past, there were few objective evaluation imaging methods for the degree of volar plate injury. The purpose of this study was to investigate the role of high frequency ultrasonography in diagnosing volar plate injury, and to explore whether ultrasound can provide a beneficial guidance to clinical decision-making and appropriate treatment adopting through accurate US classification of volar plate injury. METHODS: From May 2019 to may 2022, 41 patients diagnosed with volar plate injury were included in this study. All patients underwent ultrasonography and X-ray examinations. The sonographic features were analyzed. A new kind of classification of volar plate injury based on ultrasonography findings was described. RESULTS: Either an injury of volar plate or an avulsion fracture of middle phalangeal base was identified clearly on ultrasonography, according to which volar plate injury could be divided into three types: A, B and C. Type A, avulsion fracture of the middle phalangeal base without volar plate rupture; Type B, full thickness tear of the volar plate without avulsion fracture; Type C, partial thickness tear of the volar plate. The average thickness of the three types of injured volar plate measured by ultrasound was 0.33 ± 0.05 cm, and the average thickness of the volar plate at the same site of the corresponding finger on the contralateral side was 0.22 ± 0.03 cm. There was significant difference between the two group (t = 11.823, p = 1.2476 *10^(-14)). CONCLUSIONS: High frequency ultrasonography could be a reliable, accurate, convenient and non-radioactive diagnostic imaging technique in the evaluation of acute closed volar plate injury of PIP. And ultrasound could provide a beneficial guidance to clinical decision-making and appropriate treatment adopting through accurate US classification.

A randomised clinical trial comparing outcomes of a single digit volar plate injury - Buddy loops versus dorsal thermoplastic orthosis in a neutral position: study protocol.

BACKGROUND: Volar plate injuries are a common hand injury and complications associated with this injury such as a fixed flexion deformity, persistent pain and oedema can have a significant impact on a person's function. The literature reports these injuries are treated using various splinting materials such as thermoplastic, in varying degrees of proximal interphalangeal joint flexion or buddy loops. Despite volar plate injuries being reported as common, optimal non-surgical treatment of these injuries remains unclear. This study aims to investigate whether a dorsal blocking orthosis in a neutral position (00) is more effective than buddy loops for a volar plate injury to the proximal interphalangeal joint in preventing a fixed flexion deformity, reducing pain, managing oedema, and promoting function. METHODS: This study is a single-centre, prospective parallel-group, single blinded (assessor), randomised clinical trial. Patients between 18-65 years, who have sustained a volar plate injury to a single digit, have adequate cognitive functioning and give written informed consent will be invited to participate in this study. Patients will be randomised to either the control group where they will be fitted with buddy loops and commence early active motion exercises or the experimental group where they will receive a dorsal thermoplastic orthosis in a neutral position and commence early active motion exercises. The primary outcome measure is passive proximal interphalangeal joint extension and secondary outcome measures include passive range of motion, total passive motion, active range of motion, total active motion, grip strength, oedema, pain, function and adherence to treatment. Assessments will be completed until 8 weeks following commencement of treatment. The sample size calculation indicates that 23 patients is required in each group. With an expected dropout rate of 25% a total of 32 patients will be enrolled in each group. DISCUSSION: This study will assist in trying to improve treatment of volar plate injuries and assist in reducing complications associated with volar plate injuries, potentially reducing the need for prolonged hand therapy. TRIAL REGISTRATION: This trial has been registered with the Australian New Zealand Clinical Trials Registry (ACTRN12622001425785p). Ethical approval has been granted by the South Eastern Sydney Local Health District ethical committee (2022/ETH01697).

Volar Capsulodesis With Early Active Motion for the Treatment of Chronic Proximal Interphalangeal Joint Hyperextension Deformity.

PURPOSE: We evaluated the clinical outcomes of a series of patients with hyperextension deformity of the proximal interphalangeal joint treated with volar capsulodesis. METHODS: This retrospective study included 16 patients with symptomatic locking of the proximal interphalangeal joint who underwent volar capsulodesis and were followed for at least 2 years. We excluded patients with severe, degenerative changes on plain radiographs. Clinical evaluation included the Quick Disabilities of the Arm, Shoulder, and Hand questionnaire; Catalano's scale for proximal interphalangeal joint hyperextension deformity correction; a visual analog scale for pain; range of motion; and grip strength. Hyperextension recurrence and residual flexion contracture were also recorded. RESULTS: There were 2 women and 14 men, with a mean age of 36 years (range, 22-60 years). The mean preoperative pain scores according to the visual analog scale were 3.6 (range,1-8) and 0.5 (range, 0-3) at the final follow-up. No patient had a recurrence of the hyperextension deformity. The average Quick Disabilities of the Arm, Shoulder, and Hand score was 5, and the mean grip strength was 87% of the contralateral side. Five patients were rated as having excellent results, 9 patients as having good results, and 2 patients as having fair results. Residual flexion contracture was less than 10° in 13 patients and more than 10° in 3 cases. All patients returned to unrestricted activities. CONCLUSION: Volar capsulodesis with early active motion demonstrated favorable results and could be considered as a surgical option for the treatment of chronic hyperextension deformity of the proximal interphalangeal joint. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Complications Following Volar Locking Plate Fixation of Distal Radius Fractures in Adults: A Systematic Review of Randomized Control Trials.

PURPOSE: The purpose of this study was to assess the incidence of postoperative complications following volar locking plate (VLP) fixation of distal radius fractures (DRFs). METHODS: A search using keywords and subject headings to represent the concepts of volar plating and radius fractures was generated. Databases such as MEDLINE (Ovid), Embase (Elsevier), Scopus (Elsevier), and SPORTDiscus (EBSCO) were searched from inception to November 24, 2021, for randomized controlled trials that reported complications following DRF treated with VLP. Inclusion criteria were studies with adult patients (aged ≥18 years) randomized to VLP fixation without other concomitant surgical interventions, with a minimum follow-up of 3 months. Study sample characteristics and post-surgical complications were extracted. The Cochrane Risk of Bias tool was used to evaluate quality of evidence. RESULTS: Of the 4,059 articles identified using the search strategy, 1,778 titles/abstracts and 856 full-text articles were screened for inclusion, of which 35 articles were included for data extraction. Overall, 1,419 patients with a DRF were randomized to VLP fixation. The mean age was 60.3 years. The overall complication rate was 30.8% following VLP fixation, with 12.4% being major complications. The most common complications were median nerve-related (7.1%) and hardware removal (6.8%), secondary to other complications. Tenosynovitis was the most common tendon-related complication (3.4%). Other complications included complex regional pain syndrome (2.4%), malunion (1.3%), superficial wound infections (1.9%), and tendon rupture (1.3%). CONCLUSIONS: A meta-analysis of high-quality studies that discuss the complications after VLP fixation for DRF showed an overall complication rate of 30.8%. VLP may be related to more hardware-related complications than those previously reported. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic II.

Flexor Tendon Attritional Ruptures Following Distal Radius Volar Plate Fixation.

PURPOSE: To investigate patient and radiographic factors that may correlate with the time to flexor tendon rupture following volar plate fixation of distal radius fractures. METHODS: A total of 31 patients who underwent volar plate removal because of flexor tendon rupture were analyzed. Patient demographics and the interval from operative fixation until rupture were determined retrospectively. Volar tilt and lateral carpal alignment were measured radiographically. The Soong classification was used to grade volar plate prominence. The correlation between the duration to tendon rupture and volar tilt, carpal alignment, and age was evaluated. RESULTS: There were 7 men and 24 women. Mean age at the time of hardware removal and flexor tendon management was 66 years (n = 31). Radiographs were classified as Soong 1 (n = 24) and Soong 2 (n = 3). The mean measured volar tilt was -4° (range, -20°-+7°). The mean interval from operative fixation until complete tendon rupture was 4.9 years, (range, 0.3-13.1 years; n = 30). There was no correlation between the time interval to rupture and the magnitude of tilt, carpal alignment, or age at the time of operative fixation. CONCLUSIONS: Although volar plate prominence was present in all patients with flexor tendon ruptures, radiographic parameters including the degree of dorsal tilt, lateral carpal alignment, and patient age did not correlate with the time interval from fixation to tendon rupture. TYPE OF STUDY/LEVEL OF EVIDENCE: Prognostic IV.

Boutonniere Versus Pseudoboutonniere Deformities: Pathoanatomy, Diagnosis, and Treatment.

Finger injuries involving the proximal interphalangeal (PIP) joint are common, particularly among athletes. Injury severity is often underappreciated at initial presentation and may be dismissed broadly as a "jammed finger" injury. Delayed diagnosis and treatment of certain injuries can have an important impact on the patient's chance of regaining full function. Central slip and PIP volar plate injuries are frequently encountered injuries that, if left untreated, can lead to the permanent loss of function of the proximal interphalangeal joint. Despite the differing mechanisms of these 2 pathologies, volar plate hyperextension injuries often present with a PIP joint flexion contracture and mild distal interphalangeal joint hyperextension deformity. This is similar to a boutonniere deformity seen after an injury to the central slip, and thus, has been referred to as a "pseudo-boutonnière" deformity. Distinguishing these 2 diagnoses is important, as treatment differs, and highlights the importance of thoroughly understanding the anatomy and relevant clinical applications when evaluating PIP joint injuries.

Are external fixators as effective as volar plates in multi-fragmented radius distal intra-articular fractures (AO type C)?

INTRODUCTION: This study aimed to compare the radiological and clinical results of VP and EF applications in multi-fragmented radius distal intra-articular fractures (AO type C) in our clinic. METHODS: We retrospectively analysed 80 patients who underwent surgery for radius distal fracture (AO type C) between 2014 and 2020. Group 1 comprised patients who were treated with VP, and Group 2 comprised patients who were treated with EF. Radiological evaluation was performed by measuring radial inclination, radial length, volar tilt, intra-articular step-off and ulnar variance by two-way radiography. The clinical findings were evaluated using the Gartland and Werley scoring system, and complications were noted. RESULTS: There were no statistically significant differences between the two groups in terms of age, gender, side, fracture subtypes and follow-up time (p > 0.05). There were no statistically significant differences between the two groups in radiological parameters (based on cut-off values) (p > 0.05). The clinical evaluation did not reveal a statistically significant difference between the two groups (p = 0.613). CONCLUSION: EF is as successful as VP in providing radiological cut-off values. EF treatment can be used as an effective and safe alternative method for multi-fragmented radius distal intra-articular fractures.

Volar versus combined dorsal and volar plate fixation of complex intraarticular distal radius fractures with small dorsoulnar fragment - a biomechanical study.

Complex intraarticular distal radius fractures (DRFs), commonly managed with volar locking plates, are challenging. Combined volar and dorsal plating is frequently applied for treatment, however, biomechanical investigations are scant. The aim of this biomechanical study was to investigate volar plating versus double plating in DRFs with different degrees of lunate facet comminution.Thirty artificial radii with simulated AO/OTA 23-C2.1 and C3.1 DRFs, including dorsal defect and lunate facet comminution, were assigned to 3 groups: Group 1 with two equally-sized lunate facet fragments; Group 2 with small dorsal and large volar fragment; Group 3 with three equally-sized fragments. The specimens underwent volar and double locked plating and non-destructive ramped loading in 0° neutral position, 40° flexion and 40° extension.In each tested position, stiffness: (1) did not significantly differ among groups with same fixation method (p ≥ 0.15); (2) increased significantly after supplemental dorsal plating in Group 2 and Group 3 (p ≤ 0.02).Interfragmentary displacements between styloid process and lunate facet in neutral position were below 0.5 mm, being not significantly different among groups and plating techniques (p ≥ 0.63).Following volar plating, angular displacement of the lunate facet to radius shaft was significantly lower in Group 1 versus both Group 2 and Group 3 (p < 0.01). It decreased significantly after supplemental dorsal plating in Group 2 and Group 3 (p < 0.01), but not in Group 1 (p ≥ 0.13), and did not differ significantly among the three groups after double plating (p ≥ 0.74).Comminution of the lunate facet within its dorsal third significantly affected the biomechanical outcomes related to complex intraarticular DRFs treated with volar and double locked plates.Double plating demonstrates superior stability versus volar plating only for lunate facet comminution within its dorsal third. In contrast, volar plating could achieve stability comparable with double plating when the dorsal third of the lunate facet is not separated by the fracture pattern. Both fixation methods indicated achievable absolute stability between the articular fragments.

The Evaluation of a Flexor Digitorum Profundus-to-Volar Plate Zone I Repair Versus Button Repair: An In vitro Biomechanics Study.

PURPOSE: The purpose of the study was to evaluate joint kinematics and tendon work of flexion (WOF) following a flexor digitorum profundus (FDP)-to-volar plate (VP) repair technique relative to a pullout button for zone I flexor tendon injuries. METHODS: Fourteen digits were tested using an in vitro active finger motion simulator under 3 repaired conditions following a simulated zone I avulsion: button, FDP-VP, and "no slack" FDP-VP (corrected for additional VP length). Outcome metrics included active joint range of motion (ROM), fingertip strength, FDP and flexor digitorum superficialis tensile loads, and WOF. RESULTS: The button and FDP-VP techniques restored WOF to the intact condition for FDP and flexor digitorum superficialis. All repairs restored distal interphalangeal joint ROM and kinematics to the intact condition. Similarly, all repairs restored WOF; however, the "no slack" FDP-VP significantly increased WOF by 10% to 12% over the simple FDP-VP repair. The button technique had similar fingertip strength to the intact condition, whereas the FDP-VP repairs significantly reduced peak fingertip strength from intact, albeit only 1-2 N compared with the button repair. CONCLUSION: In this in vitro cadaveric model, the button and FDP-VP techniques restored WOF and ROM to within intact levels, with no difference between these repairs in all measured outcome metrics. CLINICAL RELEVANCE: Based on its initial strength and its equal biomechanical performance compared with the button repair, the FDP-VP technique may be a viable option for treating FDP avulsions.

Optimizing Volar Tilt Restoration and Plate Position in Distal Radius Fractures.

PURPOSE: Distal radius fractures are common and often treated surgically with a volar plate. A complication of volar plating includes tendonitis or rupture of the flexor pollicis longus (FPL) tendon. We hypothesize that failure to restore the volar tilt of the distal radius results in increased pressure on the FPL tendon. METHODS: Ten fresh-frozen cadaveric wrists were assessed for this study. During testing, weights were suspended from the FPL tendon to stimulate muscle contraction. Reproducible fractures were created and fixed via volar plating. The contact force between FPL and the bone or plate edge was measured with a force transducer in 5 surgical conditions. These were assessed to evaluate whether failure to restore the volar tilt increases the pressure with a plate proximal or distal to the watershed line. RESULTS: Significant increases in contact forces were observed between the control and both conditions in which volar tilt was not restored, with mean increases of 1.9 N and 3.0 N. A significant increase in the contact force was found when placing the plate distal to the watershed line with a mean increase of 2.03 N comparing the failure to restore volar tilt and after restoring the volar tilt. Significant increases in contact force were also observed between the dorsal plate condition, which failed to restore the volar tilt, and both plate conditions with placement distal to the watershed line, with mean differences of 0.94 N and 1.09 N, respectively. CONCLUSIONS: Failure to restore the volar tilt in surgically treated distal radius fractures causes increased pressure on the FPL tendon. Plate placement distal to the watershed line also causes increased FPL tendon pressure over the plate edge. CLINICAL RELEVANCE: This study demonstrates the importance of restoring the volar tilt of the distal radius in surgically treated distal radius fractures and confirms that plate placement distal to the watershed line will increase pressure on the FPL tendon.

Outcomes of Arthroscopic-Assisted Distal Radius Fracture Volar Plating: A Meta-Analysis.

PURPOSE: The use of wrist arthroscopy to assist fixation of distal radius fractures with volar locking plates (VLPs) has been gaining popularity in recent years; however, there is no consensus on its benefits. This meta-analysis compares outcomes of arthroscopic-assisted VLP to fluoroscopic-assisted VLP in distal radius fractures through a systematic review of the published literature. METHODS: A systematic search of publications from databases (Medline, EMBASE, Scopus, and Cochrane) was obtained from inception to May 2020. A random-effects meta-analysis was used to calculate effect sizes. Outcomes included postoperative radiographic reduction (gap, stepoff, radial inclination, volar tilt, and ulnar variance), procedural outcomes (operative time, additional soft tissue injuries and complications), and functional outcomes (range of motion; visual analog scale score; Disabilities of the Arm, Shoulder, and Hand score; Patient-Rated Wrist Evaluation score; Mayo clinic score; and grip strength). RESULTS: Six studies, involving 280 patients, met the final inclusion criteria. The meta-analysis for postoperative stepoff was statistically significant, favoring arthroscopic-assisted VLP. In addition, there was greater identification of associated soft tissue injuries, increased wrist extension, and a longer operative duration when performing arthroscopic-assisted VLP fixation. There were no differences in other postoperative radiographic outcomes, complications, or functional outcomes. CONCLUSIONS: The current literature suggests that arthroscopic-assisted VLP is a useful adjunct to intra-articular reduction and treatment of associated soft tissue injuries in distal radius fractures. Considerations should include operative time, costs, and the additional training required. Further studies are needed to assess functional outcomes. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic II.

Retrospective study of radial dome osteotomy with volar plate fixation versus K-wires in Madelung's deformity: long-term follow-up.

PURPOSE: The emerging role of the locking plate improved the technique also in corrective osteotomies in Madelung's deformity, but there is a lack of analyses between the fixation techniques, as well as little information in functional outcomes and long-term follow-up. The current study compared the outcomes, pitfalls, and advantages of volar plate and screws fixation versus K-wires fixation in a long-term follow-up. METHODS: Twenty-eight children presenting the "distal radius" variant of Madelung's deformity underwent Vickers ligament release and distal radial dome osteotomy between 2009 and 2015. Twenty-three children (20 females and 3 males, mean age 15 years and 7 months at surgery and 24 years and 8 moths at follow-up), with 26 operatively treated wrists, were available for follow-up. A retrospective two-cohort study, evaluating clinically and radiologically results, has been conducted with a mean eight years and seven months follow-up. RESULTS: Bone union and pain relief were obtained in all cases, as well as improvements in wrist motion and radiographic indices. A statistically significant correlation was identified between the volar plate fixation and an improved lunate subsidence on X-ray, and a trend towards an improved DASH score in the cohort with plate and screws, as well as significant improvement in wrist extension and supination always in the plate fixation cohort. CONCLUSIONS: The long-term follow-up enabled the patients to report on more definitive outcomes in terms of functional and cosmetic improvements. Volar plate fixation is an effective technique allowing for simple post-operative management and earlier rehabilitation program with improved clinical and radiographic outcomes.

Ulnar collateral ligament injuries of the first metacarpophalangeal joint: prevalence of associated injuries on radiographs and MRI.

PURPOSE: To evaluate the prevalence of associated findings at the first metacarpophalangeal joint on radiographs and MRI following acute ulnar collateral ligament (UCL) injuries. MATERIALS AND METHODS: This retrospective study included 25 patients with an injury of the UCL at MRI. Presence of associated injuries to the volar ligaments (checkrein and phalangoglenoid ligaments and volar plate) was assessed on radiographs and MRI independently by two musculoskeletal radiologists. Wilcoxon signed-rank test was used to compare frequencies of injuries between both modalities (p < 0.05). Interreader variability was calculated. RESULTS: Complete tears of the UCL (48%/60%, reader 1/2) were more common than partial tears (24%/16%) on MRI. Dislocation of the UCL ≥ 3 mm was detected in 40%/56% on MRI. UCL avulsion fractures were more frequently seen on MRI (28%) compared with radiographs (12%) for reader 1. Associated avulsion injuries of the phalangoglenoid ligament were evident in 12%/8% on radiographs and in 80%/76% on MRI. Almost all patients (100%/79%) with a dislocated UCL tear showed a concomitant volar ligament injury; and even two-thirds (66%/72%) of the non-displaced UCL tears had an injury to the volar ligaments. Interreader agreement was moderate to excellent (κ = 0.60-1.0). CONCLUSION: UCL tears are often associated with volar ligament injuries, even in lesser degrees of an UCL injury.

Flexor Pollicis Longus Tendon Wear Associated With Volar Plating: A Cadaveric Study.

PURPOSE: This study examined the effect of low-profile volar rim plates (VR), proximally placed standard variable-angle locking plates (pVA-LCP), and distally placed standard variable-angle locking plates (dVA-LCP) on the flexor pollicis longus (FPL) tendon in a cadaver model. We hypothesized that tendons from the VR and pVA-LCP groups would exhibit similar contact pressures, wear patterns, and post-fatigue testing mechanical properties, whereas dVA-LCP tendons would exhibit higher contact pressures, increased tendon wear patterns, and decreased mechanical properties. METHODS: Nine matched pairs of cadaveric specimens were used in this study. Thin-film pressure sensors were used to measure the initial contact loads between plates and FPL tendons. Specimens were cyclically loaded for 10,000 cycles by actuating the FPL tendon. Cycled tendons were harvested, photographed with a stereomicroscope, and graded for wear on a Likert scale by 5 observers who were blinded to the study protocol. Uniaxial tensile testing measured mechanical properties of the tendon: ultimate failure load, ultimate stress, percent stress relaxation, elastic modulus, and stiffness. RESULTS: With regard to the cadaveric FPL tendon, VR and dVA-LCP had increased contact pressure and tendon wear compared with pVA-LCP. There were no significant differences in contact pressure or tendon wear between dVA-LCP and VR. There was no major difference in the tested mechanical properties of the FPL tendon among any of the groups. CONCLUSIONS: Plates placed directly on or beyond the volar rim demonstrate increased contact pressures and increased tendon wear in a cadaveric model. CLINICAL RELEVANCE: Although low-profile plates allow for fixation of smaller volar fragments in the distal radius, they cause substantial contact with the FPL tendon, which may rupture if the plate is not removed.

Incidence for volar locking plate removal following distal radius fracture surgery.

INTRODUCTION: Distal radius fracture is the most common fracture in adults. The most common treatment for distal radius fracture is non-operative cast immobilization, although there are injuries that require surgical treatment. During the past decade, studies have reported a large increase in the surgical treatment of distal radius fractures with open reduction and internal fixation using volar locking plates. The aim of this study was to investigate the incidence and trends for plate removal after plate fixation of distal radius fractures. MATERIALS AND METHODS: The study covered all patients 18 years of age and older who had a surgically treated distal radius fracture with open reduction and internal fixation in Finland between 1998 and 2016. Patient data were obtained from the Finnish National Hospital Discharge Register. The association between increased number of platings and plate removals was examined by calculating the removal rates. The study population comprises all patients on a national level, and therefore we did not use statistical testing to analyze the data. RESULTS: A total of 18,298 patients had surgically treated distal radius fracture with volar plate in Finland during the 19-year study period from January 1, 1998 to December 31, 2016. The number of plate removal operations over the same time period was 2560. The removal rates decreased from over 20% in 1998 to less than 12% in 2016. The mean time period between plating and plate removal operations was 367 days. Most of the plate removals (n = 2235; 87.3%) were conducted during the first 2 years after plating. CONCLUSION: Plate removals have not increased as rapidly as plating operations. The removal rate has declined markedly during the last decade. Nowadays, approximately 11% of distal radius plates are removed.