RESUMEN
Aiming at the blade flutter of large horizontal-axis wind turbines, a method by utilizing biomimetic corrugation to suppress blade flutter is first proposed. By extracting the dragonfly wing corrugation, the biomimetic corrugation airfoil is constructed, finding that mapping corrugation to the airfoil pressure side has better aerodynamic performance. The influence of corrugation type, amplitudeλ, and intensity on airfoil flutter is analyzed using orthogonal experiment, which determines that theλhas the greatest influence on airfoil flutter. Based on the fluctuation range of the moment coefficient ΔCm, the optimal airfoil flutter suppression effect is obtained when the type is III,λ= 0.6, and intensity is denser (n= 13). The effective corrugation layout area in the chord direction is determined to be the leading edge, and the ΔCmof corrugation airfoil is reduced by 7.405%, compared to the original airfoil. The application of this corrugation to NREL 15 MW wind turbine 3D blades is studied, and the influence of corrugation layout length in the blade span direction on the suppressive effect is analyzed by fluid-structure interaction. It is found that when the layout length is 0.85 R, the safety marginSfreaches a maximum value of 0.3431 Hz, which is increased 2.940%. The results show that the biomimetic corrugated structure proposed in this paper can not only improve the aerodynamic performance by changing the local flow field on the surface of the blade, but also increase the structural stiffness of the blade itself, and achieve the effect of flutter suppression.
Asunto(s)
Biomimética , Diseño de Equipo , Viento , Alas de Animales , Animales , Alas de Animales/fisiología , Biomimética/métodos , Odonata/fisiología , Materiales Biomiméticos/química , Vuelo Animal/fisiología , Centrales EléctricasRESUMEN
Although traditional 3D scaffolds or biomimetic hydrogels have been used for tissue engineering and regenerative medicine, soft tissue microenvironment usually has a highly anisotropic structure and a dynamically controllable deformation with various biomolecule distribution. In this study, we developed a hierarchical hybrid gelatin methacrylate-microcapsule hydrogel (HGMH) with Neurotrophin-3(NT-3)-loaded PLGA microcapsules to fabricate anisotropic structure with patterned NT-3 distribution (demonstrated as striped and triangular patterns) by dielectrophoresis (DEP). The HGMH provides a dynamic biomimetic sinuate-microwrinkles change with NT-3 spatial gradient and 2-stage time-dependent distribution, which was further simulated using a 3D finite element model. As demonstrated, in comparison with striped-patterned hydrogel, the triangular-patterned HGMH with highly anisotropic array of microcapsules exhibits remarkably spatial NT-3 gradient distributions that can not only guide neural stem cells (NSCs) migration but also facilitate spinal cord injury regeneration. This approach to construct hierarchical 4D hydrogel system via an electromicrofluidic platform demonstrates the potential for building various biomimetic soft scaffolds in vitro tailed to real soft tissues.