Buckled Structures: Fabrication and Applications in Wearable Electronics.

Wearable electronics have attracted a tremendous amount of attention due to their many potential applications, such as personalized health monitoring, motion detection, and smart clothing, where electronic devices must conformably form contacts with curvilinear surfaces and undergo large deformations. Structural design and material selection have been the key factors for the development of wearable electronics in the recent decades. As one of the most widely used geometries, buckling structures endow high stretchability, high mechanical durability, and comfortable contact for human-machine interaction via wearable devices. In addition, buckling structures that are derived from natural biosurfaces have high potential for use in cost-effective and high-grade wearable electronics. This review provides fundamental insights into buckling fabrication and discusses recent advancements for practical applications of buckled electronics, such as interconnects, sensors, transistors, energy storage, and conversion devices. In addition to the incorporation of desired functions, the simple and consecutive manipulation and advanced structural design of the buckled structures are discussed, which are important for advancing the field of wearable electronics. The remaining challenges and future perspectives for buckled electronics are briefly discussed in the final section.

Light-Induced Buckles Localized by Polymeric Inks Printed on Bilayer Films.

Buckling instabilities generate microscale features in thin films in a facile manner. Buckles can form, for example, by heating a metal/polymer film stack on a rigid substrate. Thermal expansion differences of the individual layers generate compressive stress that causes the metal to buckle over the entire surface. The ability to dictate and confine the location of buckle formation can enable patterns with more than one length scale, including hierarchical patterns. Here, sacrificial "ink" patterned on top of the film stack localizes the buckles via two mechanisms. First, stiff inks suppress buckles such that only the non-inked regions buckle in response to infrared light. The metal in the non-inked regions absorbs the infrared light and thus gets sufficiently hot to induce buckles. Second, soft inks that absorb light get hot faster than the non-inked regions and promote buckling when exposed to visible light. The exposed metal in the non-inked regions reflects the light and thus never get sufficiently hot to induce buckles. This second method works on glass substrates, but not silicon substrates, due to the superior thermal insulation of glass. The patterned ink can be removed, leaving behind hierarchical patterns consisting of regions of buckles among non-buckled regions.

Artificial Spider Silk with Buckled Sheath by Nano-Pulley Combing.

The axial orientation of molecular chains always results in an increase in fiber strength and a decrease in toughness. Here, taking inspiration from the skin structure, artificial spider silk with a buckled sheath-core structure is developed, with mechanical strength and toughness reaching 1.61 GPa and 466 MJ m-3 , respectively, exceeding those of Caerostris darwini silk. The buckled structure is achieved by nano-pulley combing of polyrotaxane hydrogel fibers through cyclic stretch-release training, which exhibits axial alignment of the polymer chains in the fiber core and buckling in the fiber sheath. The artificial spider silk also exhibits excellent supercontraction behavior, achieving a work capacity of 1.89 kJ kg-1 , and an actuation stroke of 82%. This work provides a new strategy for designing high-performance and intelligent fiber materials.

Management of Delayed Complications of Hydrogel Scleral Buckles.

(1) Background: hydrogel scleral buckles (HSB)-related complications can happen decades after implantation, although this material has been retrieved for a long time. Due to its fragile texture, ensuring the complete removal of this material and avoiding complications are challenging. Incomplete removal, iatrogenic complication, recurrent retinal detachment, and infection could occur. (2) Methods: chart review of patients who developed delayed HSB-related complications and received removal of HSB in Taipei Veterans General Hospital from 2004 to 2021. The presenting symptoms, prior diagnosis before referral, clinical findings, image features, surgical technique, operative findings, and outcome were analyzed. Detailed surgical procedure and tips for removal were demonstrated in the study. (3) Results: a total of eleven patients were identified. The presenting symptoms include limitations to extraocular movement (ten eyes, 90.9%), ocular redness (eight eyes, 72.7%), ocular fullness (eight eyes, 72.7%), pain (six eyes, 54.5%), and exposed ocular foreign body (five eyes, 45.5%). Of note, six patients (54.5%) have monocular glaucoma and four of them have intractable high intraocular pressure. All patients underwent surgeries to smoothly remove swollen HSB via transcutaneous or transconjunctival approach. Most symptoms improved after surgery and no cases developed surgical-related complications. (4) Conclusions: although HSB have been off the market for decades, delayed complications are still emerging. Clinicians should remain alert for potential complications for patients with prior HSB surgeries. Early diagnosis and meticulous management can help to safely remove the expanded HSB and reduce the associated complications.

Strain-Modulated Magnetism in MoS2.

Since the experiments found that two-dimensional (2D) materials such as single-layer MoS2 can withstand up to 20% strain, strain-modulated magnetism has gradually become an emerging research field. However, applying strain alone is difficult to modulate the magnetism of single-layer pristine MoS2, but applying strain combined with other tuning techniques such as introducing defects makes it easier to produce and alter the magnetism in MoS2. Here, we summarize the recent progress of strain-dependent magnetism in MoS2. First, we review the progress in theoretical study. Then, we compare the experimental methods of applying strain and their effects on magnetism. Specifically, we emphasize the roles played by web buckles, which induce biaxial tensile strain conveniently. Despite some progress, the study of strain-dependent MoS2 magnetism is still in its infancy, and a few potential directions for future research are discussed at the end. Overall, a broad and in-depth understanding of strain-tunable magnetism is very necessary, which will further drive the development of spintronics, straintronics, and flexible electronics.

Organo-Selenium Coatings Inhibit Gram-Negative and Gram-Positive Bacterial Attachment to Ophthalmic Scleral Buckle Material.

PURPOSE: Biofilm formation is a problem for solid and sponge-type scleral buckles. This can lead to complications that require removal of the buckle, and result in vision loss due to related ocular morbidity, primarily infection, or recurrent retinal detachment. We investigate the ability of a covalent organo-selenium coating to inhibit biofilm formation on a scleral buckle. METHODS: Sponge and solid Labtican brand scleral buckles were coated with organo-selenium coupled to a silyation reagent. Staphylococcus aureus biofilm formation was monitored by a standard colony-forming unit assay and the confocal laser scanning microscopy, while Pseudomonas aeruginosa biofilm formation was examined by scanning electron microscopy. Stability studies were done, by soaking in phosphate buffer saline (PBS) at room temperature for 2 months. Toxicity against human corneal epithelial cell was examined by growing the cells in the presence of organo-selenium-coated scleral buckles. RESULTS: The organo-selenium coating inhibited biofilm formation by gram-negative and gram-positive bacteria. The buckle coatings also were shown to be fully active after soaking in PBS for 2 months. The organo-selenium coatings had no effect on the viability of human corneal epithelial cells. CONCLUSIONS: Organo-selenium can be used to covalently coat a scleral buckle, which is stable and inhibits biofilm formation for gram-negative and gram-positive bacteria. The organo-selenium buckle coating was stable and nontoxic to cell culture. TRANSLATIONAL RELEVANCE: This technology provides a means to inhibit bacterial attachment to devices attached to the eye, without damage to ocular cells.

Buckled Thin-Film Transistors and Circuits on Soft Elastomers for Stretchable Electronics.

Although recent progress in the field of flexible electronics has allowed the realization of biocompatible and conformable electronics, systematic approaches which combine high bendability (<3 mm bending radius), high stretchability (>3-4%), and low complexity in the fabrication process are still missing. Here, we show a technique to induce randomly oriented and customized wrinkles on the surface of a biocompatible elastomeric substrate, where Thin-Film Transistors (TFTs) and circuits (inverter and logic NAND gates) based on amorphous-IGZO are fabricated. By tuning the wavelength and the amplitude of the wrinkles, the devices are fully operational while bent to 13 µm bending radii as well as while stretched up to 5%, keeping unchanged electrical properties. Moreover, a flexible rectifier is also realized, showing no degradation in the performances while flat or wrapped on an artificial human wrist. As proof of concept, transparent TFTs are also fabricated, presenting comparable electrical performances to the nontransparent ones. The extension of the buckling approach from our TFTs to circuits demonstrates the scalability of the process, prospecting applications in wireless stretchable electronics to be worn or implanted.