Origin of the Efficiency Roll-off in Quantum Dot Light-Emitting Diodes: An Electrically Excited Transient Absorption Spectroscopy Study.

In situ characterizations of charge injection dynamics, equilibrated concentration, and electric field distributions shed light on the critical mechanisms of quantum dot light-emitting diodes (QD-LEDs). In this work, we developed electrically excited transient absorption spectroscopy, which can provide the above key information, to investigate the efficiency roll-off of QD-LEDs. We found that the average electron populations per QD are low when QD-LEDs exhibit efficiency roll-off, excluding Auger recombination as the main cause. We also revealed that the weak electrical field inside the QD layer under forward biases has a negligible impact on the efficiency. Interestingly, we found that as the voltage increases the electron concentration in the QD layer saturates at very low levels. When combined with the concomitant efficiency roll-off, we propose electron leakage is the main loss at elevated driving voltages. We further demonstrate that increasing the electron confinement potential with the ZnS shell enables us to efficiently mitigate the efficiency roll-off.

Precise Regulation of the Reverse Intersystem Crossing Pathway by Hybridized Long-Short Axis Strategy for High-Performance Multi-Resonance TADF Emitters.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) molecules have experienced great success in organic light-emitting diodes (OLEDs) owing to their outstanding quantum efficiencies and narrow full width at half-maximums (FWHMs). However, the reverse intersystem crossing (RISC) rates of MR-TADF emitters are usually small, which will lead to relatively long triplet exciton lifetime and severe efficiency roll-off. Here, we report an effective molecular design strategy to introduce multichannel RISC pathways and thus increase RISC rates without compromising the color fidelity and emission efficiency by the "hybridized long-short axis (HLSA)" strategy. The TPA-CN-BN shows a near-unity photoluminescence quantum yield, rapid RISC rate of 1.4 × 105 s-1, narrow FWHM of 23 nm, and small singlet-triplet energy gap (ΔEST) of 0.06 eV in solution. The non-sensitized OLED based on TPA-CN-BN exhibits a narrowband emission with the FWHM of 31 nm, in company with external quantum efficiency (EQE) of 37.9%. Notably, the device exhibits the low efficiency roll-off as the EQEs maintain 34.8% and 21.8% at 100 and 1000 cd m-2, respectively, representing the best performance for single-host OLEDs based on the BCzBN skeleton. This study provides a fresh and promising approach to realize high-performance OLEDs with high color purity and remarkable device efficiency.

Dielectric Regulation for Efficient Top-Emission Perovskite Light-Emitting Diodes with Suppressed Efficiency Roll-off.

Perovskite light-emitting diodes (PeLEDs) have shown incalculable application potential in the fields of next-generation displays and light communication owing to the rapidly increased external quantum efficiencies (EQEs). However, most PeLEDs obtain a maximum EQE at small current density (J) region and suffer from severe efficiency roll-off in different extents. Herein, it is demonstrated that the dopant with large dipole moment like KBF4 facilitates the effective dielectric regulation of perovskite emissive layer. The increased dielectric constant lowers the exciton binding energy and suppresses the Auger recombination of the 2D/3D segregated perovskite structure, which improves the photoluminescence quantum yield remarkably at an excitation intensity up to 103  mW cm-2 . Accordingly, the top-emission PeLED that delivers a high maximum EQE above 20% is fabricated and can retain EQE > 10% at an extremely high J of 708 mA cm-2 . These results represent one of the most efficient top-emission PeLEDs with ultra-low efficiency roll-off, which provide a viable methodology for tuning the dielectric response of perovskite films for improved high radiance performance of perovskite electroluminescence devices.

Efficiency Roll-Off Free Electroluminescence from Monolayer WSe2.

Exciton-exciton annihilation (EEA) is a nonradiative process commonly observed in excitonic materials at high exciton densities. Like Auger recombination, EEA degrades luminescence efficiency at high exciton densities and causes efficiency roll-off in light-emitting devices. Near-unity photoluminescence quantum yield has been demonstrated in transition metal dichalcogenides (TMDCs) at all exciton densities with optimal band structure modification mediated by strain. Although the recombination pathways in TMDCs are well understood, the practical application of light-emitting devices has been challenging. Here, we demonstrate a roll-off free electroluminescence (EL) device composed of TMDC monolayers tunable by strain. We show a 2 orders of magnitude EL enhancement from the WSe2 monolayer by applying a small strain of 0.5%. We attain an internal quantum efficiency of 8% at all injection rates. Finally, we demonstrate transient EL turn-on voltages as small as the band gap. Our approach will contribute to practical applications of roll-off free optoelectronic devices based on excitonic materials.

Combining Carbazole Building Blocks and ν-DABNA Heteroatom Alignment for a Double Boron-Embedded MR-TADF Emitter with Improved Performance.

Building blocks and heteroatom alignments are two determining factors in designing multiple resonance (MR)-type thermally activated delayed fluorescence (TADF) emitters. Carbazole-fused MR emitters, represented by CzBN derivatives, and the heteroatom alignments of ν-DABNA are two star series of MR-TADF emitters that show impressive performances from the aspects of building blocks and heteroatom alignments, respectively. Herein, a novel CzBN analog, Π-CzBN, featuring ν-DABNA heteroatom alignment is developed via facile one-shot lithium-free borylation. Π-CzBN exhibits superior photophysical properties with a photoluminescence quantum yield close to 100 % and narrowband sky blue emission with a full width at half maximum (FWHM) of 16 nm/85 meV. It also gives efficient TADF properties with a small singlet-triplet energy offset of 40 meV and a fast reverse intersystem crossing rate of 2.9×105  s-1 . The optimized OLED using Π-CzBN as the emitter achieves an exceptional external quantum efficiency of 39.3 % with a low efficiency roll-off of 20 % at 1000 cd m-2 and a narrowband emission at 495 nm with FWHM of 21 nm/106 meV, making it one of the best reported devices based on MR emitters with comprehensive performance.

Medium-Ring Strategy Enables Multiple Resonance Emitters with Twisted Geometry and Fast Spin-Flip to Suppress Efficiency Roll-Off.

Suppressing aggregation-caused quenching (ACQ) effect and reducing device efficiency roll-off are both crucial yet challenging for multi-resonance (MR) emitters. Herein, we put forward a medium-ring strategy to design efficient MR emitters that feature heptagonal tribenzo[b,d,f]azepine (TBA) donors. The highly twisted conformation enlarges the intermolecular distances between the MR-emitting cores, and thus suppresses ACQ effect. Meanwhile, the introduction of heptagonal donors enhances spin-orbital coupling, so as to accelerate reverse intersystem crossing (RISC) process. This medium-ring strategy gives rise to the first example of blue MR emitter that simultaneously possesses radiative decay rate as fast as 108  s-1 and RISC rate as fast as 106  s-1 . Accordingly, DTBA-B2N3 enables to assemble high-performance blue organic light-emitting diodes (OLEDs) with maximum external quantum efficiency (EQEmax ) of 30.9 % and alleviated efficiency roll-off (EQE1000 : 20.5 %).

Highly Efficient Multi-Resonance Thermally Activated Delayed Fluorescence Material with a Narrow Full Width at Half-Maximum of 0.14 eV.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) material, which possesses the ability to achieve narrowband emission in organic light-emitting diodes (OLEDs), is of significant importance for wide color gamut and high-resolution display applications. To date, MR-TADF material with narrow full width at half-maximum (FWHM) below 0.14 eV still remains a great challenge. Herein, through peripheral protection of MR framework by phenyl derivatives, four efficient narrowband MR-TADF emitters are successfully designed and synthesized. The introduction of peripheral phenyl-based moieties via a single bond significantly suppresses the high-frequency stretching vibrations and reduces the reorganization energies, accordingly deriving the resulting molecules with small FWMH values around 20 nm/0.11 eV and fast radiative decay rates exceeding 108 s-1 . The corresponding green OLED based on TPh-BN realizes excellent performance with the maximum external quantum efficiency (EQE) up to 28.9% without utilizing any sensitizing host and a relatively narrow FWHM of 0.14 eV (28 nm), which is smaller than the reported green MR-TADF molecules in current literatures. Especially, the devices show significantly reduced efficiency roll-off and relatively long operational lifetimes among the sensitizer-free MR-TADF devices. These results clearly indicate the promise of this design strategy for highly efficient OLEDs with ultra-high color purity.

Low Light Amplification Threshold and Reduced Efficiency Roll-Off in Thick Emissive Layer OLEDs from a Diketopyrrolopyrrole Derivative.

External quantum efficiency (EQE) roll-off under high current injection has been one of the major limiting factors toward the development of organic semiconductor laser diodes (OSLDs). While significant progress in this regard has been made on organic semiconductors (OSCs) emitting in the blue-green region of the visible spectrum, OSCs with longer wavelength emission (>600 nm) have fallen behind in both material development and the advancement in device architectures suitable for the realization of OSLDs. Therefore, to make simultaneous incremental advancements, a host-guest system comprising of a high performing poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) polymer and an efficient small molecule laser dye, dithiophenyl diketopyrrolopyrrole (DT-DPP), is used. This combination provides an extremely low amplified spontaneous emission threshold of 4.2 µJ cm-2 at an emission wavelength of 620 nm. The solution-processed organic light-emitting diodes (OLEDs) fabricated using this system exhibit a high external quantum efficiency (EQE) of 2.6% with low efficiency roll-off and high current injection up to 90 A cm-2 to yield ultrahigh luminance of over 1.5 million cd m-2 .

Low Roll-Off and High Stable Electroluminescence in Three-Dimensional FAPbI3 Perovskites with Bifunctional-Molecule Additives.

Three-dimensional (3D) perovskites have been demonstrated as an effective strategy to achieve efficient light-emitting diodes (LEDs) at high brightness. However, most 3D perovskite LEDs still suffer from serious efficiency roll-off. Here, using FAPbI3 as a model system, we find that the main reason for efficiency droop and degradation in 3D perovskite LEDs is defects and the ion migration under electrical stress. By introducing bifunctional-molecule 3-chlorobenzylamine additive into the perovskite precursor solution, the detrimental effects can be significantly suppressed through the growth of high crystalline perovskites and defect passivation. This approach leads to bright near-infrared perovskite LEDs with a peak external quantum efficiency of 16.6%, which sustains 80% of its peak value at a high current density of 460 mA cm-2, corresponding to a high brightness of 300 W sr-1 m-2. Moreover, the device exhibits a record half-lifetime of 49 h under a constant current density of 100 mA cm-2.

Space-Confined Donor-Acceptor Strategy Enables Fast Spin-Flip of Multiple Resonance Emitters for Suppressing Efficiency Roll-Off.

Multi-resonance boron-nitrogen-containing thermally activated delayed fluorescence (MR-TADF) emitters have experienced great success in assembling narrowband organic light-emitting diodes (OLEDs). However, the slow reverse intersystem crossing rate (kRISC ) of MR-emitters (103 -105  s-1 ) that will lead to severe device efficiency roll-off has received extensive attention and remains a challenging issue. Herein, we put forward a "space-confined donor-acceptor (SCDA)" strategy to accelerate RISC process. The introduction of SCDA units onto the MR-skeleton induces intermediate triplet states, which leads to a multichannel RISC process and thus increases kRISC . As illustrated examples, efficient MR-emitters have been developed with a sub-microsecond delayed lifetime and a high kRISC of 2.13×106  s-1 , which enables to assemble high-performance OLEDs with a maximum external quantum efficiency (EQEmax ) as high as 32.5 % and an alleviated efficiency roll-off (EQE1000 : 22.9 %).

Highly Efficient Asymmetric Multiple Resonance Thermally Activated Delayed Fluorescence Emitter with EQE of 32.8 % and Extremely Low Efficiency Roll-Off.

Multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters show great potentials for high color purity organic light-emitting diodes (OLEDs). However, the simultaneous realization of high photoluminescence quantum yield (PLQY) and high reverse intersystem crossing rate (kRISC ) is still a formidable challenge. Herein, a novel asymmetric MR-TADF emitter (2Cz-PTZ-BN) is designed that fully inherits the high PLQY and large kRISC values of the properly selected parent molecules. The resonating extended π-skeleton with peripheral protection can achieve a high PLQY of 96 % and a fast kRISC of above 1.0×105  s-1 , and boost the performance of corresponding pure green devices with an outstanding external quantum efficiency (EQE) of up to 32.8 % without utilizing any sensitizing hosts. Remarkably, the device sufficiently maintains a high EQE exceeding 23 % at a high luminance of 1000 cd m-2 , representing the highest value for reported green MR-TADF materials at the same luminescence.

Achieving High Efficiency at High Luminance in Fluorescent Organic Light-Emitting Diodes through Triplet-Triplet Fusion Based on Phenanthroimidazole-Benzothiadiazole Derivatives.

Achieving high efficiency at high luminance is one of the most important prerequisites towards practical application of any kind of light-emitting diode (LED). Herein, we report highly emissive organic fluorescent molecules based on phenanthroimidazole-benzothiadiazole derivatives capable of maintaining high external quantum efficiency (EQE) at high luminance enabled by triplet-triplet fusion (TTF) in doped organic LEDs. The PIBzP-, PIBzPCN-, and PIBzTPA-based devices showed EQEs of 8.27, 9.15, and 8.64 %, respectively, at luminance of higher than 1000 cd m-2 , with little efficiency roll-off.

Bright CsPbI3 Perovskite Quantum Dot Light-Emitting Diodes with Top-Emitting Structure and a Low Efficiency Roll-Off Realized by Applying Zirconium Acetylacetonate Surface Modification.

Zirconium acetylacetonate used as a co-precursor in the synthesis of CsPbI3 quantum dots (QDs) increased their photoluminescence quantum efficiency to values over 90%. The top-emitting device structure on a Si substrate with high thermal conductivity (to better dissipate Joule heat generated at high current density) was designed to improve the light extraction efficiency making use of a strong microcavity resonance between the bottom and top electrodes. As a result of these improvements, light-emitting diodes (LEDs) utilizing Zr-modified CsPbI3 QDs with an electroluminescence at 686 nm showed external quantum efficiency (EQE) of 13.7% at a current density of 108 mA cm-2, which was combined with low efficiency roll-off (maintaining an EQE of 12.5% at a high current density of 500 mA cm-2) and a high luminance of 14 725 cd m-2, and the stability of the devices being repeatedly lit (cycled on and off at high drive current density) has been greatly enhanced.

Chiral Spiro-Axis Induced Blue Thermally Activated Delayed Fluorescence Material for Efficient Circularly Polarized OLEDs with Low Efficiency Roll-Off.

A spiro-axis skeleton not only introduces circularly polarized luminescence (CPL) into thermally activated delayed fluorescence (TADF) molecules but also enhances the intramolecular through space charge transfer (TSCT) process. Spiral distributed phenoxazine and 2-(trifluoromethyl)-9H-thioxanthen-9-one-10,10-dioxide act as donor and acceptor units, respectively. The resulting TADF enantiomers, (rac)-OSFSO, display emission maxima at 470 nm, small singlet-triplet energy gap (ΔEST ) of 0.022 eV and high photoluminescence quantum yield (PLQY) of 81.2 % in co-doped film. The circularly polarized OLEDs (CP-OLEDs) based on (R)-OSFSO and (S)-OSFSO display obvious circularly polarized electroluminescence (CPEL) signals with dissymmetry factor up to 3.0×10-3 and maximum external quantum efficiency (EQEmax ) of 20.0 %. Moreover, the devices show remarkably low efficiency roll-off with an EQE of 19.3 % at 1000 cd m-2 (roll-off ca. 3.5 %), which are among the top results of CP-OLEDs.

Tetrabenzo[a,c]phenazine Backbone for Highly Efficient Orange-Red Thermally Activated Delayed Fluorescence with Completely Horizontal Molecular Orientation.

Three thermally activated delayed fluorescence (TADF) molecules, namely PQ1, PQ2, and PQ3, are composed of electron-accepting (A) tetrabenzo[a,c]phenazine (TBPZ) and electron-donating (D) phenoxazine (PXZ) units are designed and characterized. The combined effects of planar acceptor manipulation and high steric hindrance between D and A units endow high molecular rigidity that suppresses nonradiative decay of the excitons with improved photoluminescence quantum yields (PLQYs). Particularly, the well-aligned excited states involving a singlet and a triplet charge-transfer excited states and a localized excited triplet state in PQ3 enhances the reverse intersystem crossing rate constant (kRISC ) with a short delay lifetime (τd ). The orange-red OLED based on PQ3 displays a maximum external EL quantum efficiency (EQE) of 27.4 % with a well-suppressed EL efficiency roll-off owing to a completely horizontal orientation of the transition dipole moment in the film state.

Imidazo[1,2-a]pyridine as an Electron Acceptor to Construct High-Performance Deep-Blue Organic Light-Emitting Diodes with Negligible Efficiency Roll-Off.

Two novel bipolar deep-blue fluorescent emitters, IP-PPI and IP-DPPI, featuring different lengths of the phenyl bridge, were designed and synthesized, in which imidazo[1,2-a]pyridine (IP) and phenanthroimidazole (PI) were proposed as an electron acceptor and an electron donor, respectively. Both of them exhibit outstanding thermal stability and high emission quantum yields. All the devices based on these two materials showed negligible efficiency roll-off with increasing current density. Impressively, non-doped organic light-emitting diodes (OLEDs) based on IP-PPI and IP-DPPI exhibited external quantum efficiencies (EQEs) of 4.85 % and 4.74 % with CIE coordinates of (0.153, 0.097) and (0.154, 0.114) at 10000 cd m-2 , respectively. In addition, the 40 wt % IP-PPI doped device maintained a high EQE of 5.23 % with CIE coordinates of (0.154, 0.077) at 10000 cd m-2 . The doped device based on 20 wt % IP-DPPI exhibited a higher deep-blue electroluminescence (EL) performance with a maximum EQE of up to 6.13 % at CIE of (0.153, 0.078) and maintained an EQE of 5.07 % at 10000 cd m-2 . To the best of our knowledge, these performances are among the state-of-the art devices with CIEy ≤0.08 at a high brightness of 10000 cd m-2 . Furthermore, by doping a red phosphorescent dye Ir(MDQ)2 (MDQ=2-methyldibenzo[f,h]quinoxaline) into the IP-PPI and IP-DPPI hosts, high-performance red phosphorescent OLEDs with EQEs of 20.8 % and 19.1 % were achieved, respectively. This work may provide a new approach for designing highly efficient deep-blue emitters with negligible roll-off for OLED applications.

Rational Molecular Design Overcoming the Long Delayed Fluorescence Lifetime and Serious Efficiency Roll-Off in Blue Thermally Activated Delayed Fluorescent Devices.

Blue thermally activated delayed fluorescent (TADF) devices with short excited-state lifetime, high reverse intersystem crossing rate, and low-efficiency roll-off were developed by managing the molecular structure of donor-acceptor-type blue emitters. Three isomers of blue TADF emitters with a diphenyltriazine acceptor and three carbazole donors were synthesized. The position of the donor moieties in the phenyl linker connecting the donor and acceptor moieties was controlled to devise compounds with a short delayed fluorescence lifetime. A blue TADF emitter with three carbazole donors at 2-, 3-, and 4- positions of a phenyl linker shortened the excited state lifetime to 4.1 µs, showed a high external quantum efficiency of 20.4 %, and low efficiency roll-off of less than 10 % at 1000 cd m-2 . Therefore, a molecular design distorting the donors by aligning them in a consecutive way is useful to resolve the issues of long delayed fluorescence lifetime and efficiency roll-off of blue TADF devices.

Reduced Efficiency Roll-Off in White Phosphorescent Organic Light-Emitting Diodes Based on Double Emission Layers.

We demonstrate high-efficiency white phosphorescent organic light-emitting diodes with low efficiency roll-off. The feature of the device concept is employing two phosphorescent emission layers (EMLs) separated by a mixed interlayer. Both the EMLs are doped by two phosphorescent dyes. The resulting white device with the optimized doping concentration shows a maximum efficiency of 31.0 cd/A with extremely low efficiency roll-off of 30.7 cd/A at 1000 cd/m², 27.2 cd/A at 5000 cd/m², and 25.5 cd/A at 10,000 cd/m², respectively, without any outcoupling structures. This is enabled by the balanced charge carrier transport in EMLs, leading to broader exciton recombination zone.

High-Performance Non-doped OLEDs with Nearly 100 % Exciton Use and Negligible Efficiency Roll-Off.

Non-doped organic light-emitting diodes (OLEDs) possess merits of higher stability and easier fabrication than doped devices. However, luminescent materials with high exciton use are generally unsuitable for non-doped OLEDs because of severe emission quenching and exciton annihilation in neat films. Herein, we wish to report a novel molecular design of integrating aggregation-induced delayed fluorescence (AIDF) moiety within host materials to explore efficient luminogens for non-doped OLEDs. By grafting 4-(phenoxazin-10-yl)benzoyl to common host materials, we develop a series of new luminescent materials with prominent AIDF property. Their neat films fluoresce strongly and can fully harvest both singlet and triplet excitons with suppressed exciton annihilation. Non-doped OLEDs of these AIDF luminogens exhibit excellent luminance (ca. 100000 cd m-2 ), outstanding external quantum efficiencies (21.4-22.6 %), negligible efficiency roll-off and improved operational stability. To the best of our knowledge, these are the most efficient non-doped OLEDs reported so far. This convenient and versatile molecular design is of high significance for the advance of non-doped OLEDs.

The Combination of a Donor-Acceptor TADF and a MR-TADF Emitting Core Results in Outstanding Electroluminescence Performance.

Here the utility and potential of an emitter design are demonstrated, consisting of a narrowband-emitting multiresonant thermally activated delayed fluorescent (MR-TADF) core that is decorated with a suitably higher energy donor-acceptor TADF moiety. Not only does this D-A TADF group offer additional channels for triplet exciton harvesting and confers faster reverse intersystem crossing (RISC) kinetics but it also acts as a steric shield, insulating the emissive MR-TADF core from aggregation-caused quenching. Two emitters, DtCzBN-CNBT1 and DtCzBN-CNBT2, demonstrate enhanced photophysical properties leading to outstanding performance of the organic light-emitting diodes (OLEDs). DtCzBN-CNBT2, containing a D-A TADF moiety, has a faster kRISC (1.1 × 105 s-1) and higher photoluminescence quantum yield (ΦPL: 97%) compared to DtCzBN-CNBT1 (0.2 × 105 s-1, ΦPL: 90%), which contains a D-A moiety that itself is not TADF. The sensitizer-free OLEDs with DtCzBN-CNBT2 achieve a record-high maximum external quantum efficiency (EQEmax) of 40.2% and showed milder efficiency roll-off (EQE1000 of 20.7%) compared to the DtCzBN-CNBT1-based devices (EQEmax of 37.1% and EQE1000 of 11.9%).