RESUMEN
Recent years have seen a growing interest in zero-dimensional (0D) transport phenomena occurring across two-dimensional (2D) materials for their potential applications to nanopore technology such as ion separation and molecular sensing. Herein, we investigate ion transport through 1 nm-wide nanopores in Ti3C2 MXene using molecular dynamics simulations. The high polarity and fish-bone arrangement of the Ti3C2 MXene offer a built-in potential and an atomic-scale distortion to the nanopore, causing an adsorption preference for cations. Our observation of variable cation-specific ion selectivity and Coulomb blockade highlights the complex interplay between adsorption affinity and cation size. The cation-specific ion selectivity can induce both the ion current and electro-osmotic water transmission, which can be regulated by tailoring the ions' preferential pathways through electric field tilting. Our finding underscores the pivotal role of the atomic arrangement of MXenes in 0D ion transport and provides fundamental insight into the application of 2D material in nanopores-based technologies.
RESUMEN
This study emphasizes the significance of optimizing heat transmission, energy conversion, and thermal management in electronic devices, renewable energy systems, and emerging technologies like thermoelectric devices and energy storage systems. The aim is to enhance heat transfer efficiency for improved performance and lifespan of electronic equipment. The research utilizes a mathematical flow analysis to study a water-based ternary nanofluid's flow and thermal characteristics in a vertical microfluidic channel driven by peristalsis and electroosmosis. The ternary-hybrid nanofluid (THNF), comprising copper, silver, and alumina nanoparticles dissolved in water, is examined considering induced magnetic fields. The study delves into fluid flow, heat absorption, and mixed convection, using Debye-Hückel, lubrication, and long wavelength approximations. Results show that THNF exhibits superior heat transmission compared to pure water. Increasing solid volume fraction of nanoparticles decreases THNF's temperature. Induced magnetic fields impact the system. This research could influence thermal pipe heat sinks and bioengineered medical devices design.
RESUMEN
Electroosmotic flow (EOF), a consequence of an imposed electric field onto an electrolyte solution in the tangential direction of a charged surface, has emerged as an important phenomenon in electrokinetic transport at the micro/nanoscale. Because of their ability to efficiently pump liquids in miniaturized systems without incorporating any mechanical parts, electroosmotic methods for fluid pumping have been adopted in versatile applications-from biotechnology to environmental science. To understand the electrokinetic pumping mechanism, it is crucial to identify the role of an ionically polarized layer, the so-called electrical double layer (EDL), which forms in the vicinity of a charged solid-liquid interface, as well as the characteristic length scale of the conducting media. Therefore, in this tutorial review, we summarize the development of electrical double layer models from a historical point of view to elucidate the interplay and configuration of water molecules and ions in the vicinity of a solid-liquid interface. Moreover, we discuss the physicochemical phenomena owing to the interaction of electrical double layer when the characteristic length of the conducting media is decreased from the microscale to the nanoscale. Finally, we highlight the pioneering studies and the most recent works on electro osmotic flow devoted to both theoretical and experimental aspects.
Asunto(s)
Electroósmosis , Microfluídica , IonesRESUMEN
Biological nanopores are emerging as powerful tools for single-molecule analysis and sequencing. Here, we engineered the two-component pleurotolysin (PlyAB) toxin to assemble into 7.2 × 10.5 nm cylindrical nanopores with a low level of electrical noise in lipid bilayers, and we addressed the nanofluidic properties of the nanopore by continuum simulations. Surprisingly, proteins such as human albumin (66.5 kDa) and human transferrin (76-81 kDa) did not enter the nanopore. We found that the precise engineering of the inner surface charge of the PlyAB induced electro-osmotic vortices that allowed the electrophoretic capture of the proteins. Once inside the nanopore, two human plasma proteins could be distinguished by the characteristics of their current blockades. This fundamental understanding of the nanofluidic properties of nanopores provides a practical method to promote the capture and analysis of folded proteins by nanopores.
Asunto(s)
Nanoporos , Ingeniería de Proteínas , Proteínas/aislamiento & purificación , Electricidad , Electroforesis , Proteínas Fúngicas , Proteínas Hemolisinas , Humanos , Membrana Dobles de Lípidos , Pliegue de ProteínaRESUMEN
The performance of conventional surface plasmon resonance (SPR) biosensors can be limited by the diffusion of the target analyte to the sensor surface. This work presents an SPR biosensor that incorporates an active mass-transport mechanism based on dielectrophoresis and electroosmotic flow to enhance analyte transport to the sensor surface and reduce the time required for detection. Both these phenomena rely on the generation of AC electric fields that can be tailored by shaping the electrodes that also serve as the SPR sensing areas. Numerical simulations of electric field distribution and microparticle trajectories were performed to choose an optimal electrode design. The proposed design improves on previous work combining SPR with DEP by using face-to-face electrodes, rather than a planar interdigitated design. Two different top-bottom electrode designs were experimentally tested to concentrate firstly latex beads and secondly biological cells onto the SPR sensing area. SPR measurements were then performed by varying the target concentrations. The electrohydrodynamic flow enabled efficient concentration of small objects (3 µm beads, yeasts) onto the SPR sensing area, which resulted in an order of magnitude increased SPR response. Negative dielectrophoresis was also used to concentrate HEK293 cells onto the metal electrodes surrounded by insulating areas, where the SPR response was improved by one order of magnitude.
Asunto(s)
Electroforesis/instrumentación , Electroforesis/métodos , Resonancia por Plasmón de Superficie/métodos , Difusión , Electrodos , Electroósmosis , Diseño de Equipo , Células HEK293 , Humanos , Dispositivos Laboratorio en un Chip , Látex , Resonancia por Plasmón de Superficie/instrumentaciónRESUMEN
The purpose of this research idea is to develop a method to electrochemically convert carbon dioxide into higher alcohol chains such as ethanol to be used as fuel. Electrochemical CO2 reduction has low yields and poor product selectivity, being able to improve this reaction would have an impact in the energy and food market. We propose the use of a modified nanofluidic transistor to block reaction steps that are thermodynamically favored by constraining the kinetics of the reaction when the reaction takes place in a geometrically restricted environment with different double layer properties to those found in conventional planar electrosynthesis.
RESUMEN
DC electric fields (EFs) can often induce cellular polarity, and direct migration of cells toward one of the electrical poles. The mechanism(s) by which cells sense weak EFs is not established. We present here a molecular flux model to describe electromigration of plasma membrane macromolecules and compare its predictions to electromigration of a lipid-anchored surface protein, tdTomato-GPI, under different experimental conditions. Gradients of tdTomato-GPI are assembled based on its electrophoretic and electro-osmotic mobilities and collapsed by its own diffusion. The flux model predicts greatest cathodal accumulation for tdTomato-GPI under slightly acidic conditions, and weak cathodal accumulation under alkaline conditions. Predictions by the flux model align closely with measurements of the electromigration of tdTomato-GPI except at pH 6, the only condition examined in which the protein exhibits a net positive surface charge. We use the model to predict the time course and relative steady state concentration difference for asymmetric accumulation of other surface macromolecules based on their physical properties. We also describe a method for identifying the physical properties of the plasma membrane proteins in zebrafish keratocytes, in order to predict likely candidates for the electric field receptor in this model migratory system that exhibits cathodal galvanotaxis, and to predict the asymmetric distribution of proteins in other cell types. We provide a physical basis for predicting the dynamics of electromigration for numerous cell surface macromolecules and provide evidence for supporting the role of electromigration in directing cell polarity, migration and growth in response to weak EFs.
Asunto(s)
Membrana Celular/metabolismo , Movimiento Celular , Polaridad Celular , Electricidad , Sustancias Macromoleculares/metabolismo , Taxia , Animales , Células CHO , Cricetinae , Cricetulus , Electroósmosis , Electroforesis , Ontología de Genes , Glicosilfosfatidilinositoles/metabolismo , Modelos Biológicos , Proteómica , Pez CebraRESUMEN
BACKGROUND: In this work, a small-scale ceramic microbial fuel cell (MFC) with a novel type of metal-carbon-derived electrocatalyst containing iron and nicarbazin (Fe-NCB) was developed, to enhance electricity generation from neat human urine. Substrate oxidation at the anode provides energy for the separation of ions and recovery from urine without any chemical or external power additions. RESULTS: The catalyst was shown to be effective in clear electrolyte synthesis of high pH, compared with a range of carbon-based metal-free materials. Polarisation curves of tested MFCs showed up to 53% improvement (44.8 W m-3) in performance with the use of Fe-NCB catalyst.Catholyte production rate and pH directly increased with power performance while the conductivity decreased showing visually clear extracted liquid in the best-performing MFCs. CONCLUSIONS: Iron based catalyst Fe-NCB was shown to be a suitable electrocatalyst for the air-breathing cathode, improving power production from urine-fed MFCs. The results suggest electrochemical treatment through electro-osmotic drag while the electricity is produced and not consumed. Electro-osmotic production of clear catholyte is shown to extract water from urine against osmotic pressure. Recovering valuable resources from urine would help to transform energy intensive treatments to resource production, and will create opportunities for new technology development. © 2018 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMEN
The change in properties and structure of clay soils due to electro-osmosis was studied. These alterations were exemplified by mantle loam and kaolin. It is shown that electro-osmotic treatment of the soils on the open scheme resulted in the transformations in their moisture content, total and dry density, salinity, pH, and the parameters of their particles. The most notable changes occurred within the diffuse double layers (DDLs) of soil particles such as their recharge in the anodic zone. The transformations of the loam particles DDLs resulted in their aggregation in the cathodic and anodic zones. Also, electro-osmotic flow caused the redistribution of pore sizes within the soils between the electrodes. In the case of the kaolin, electro-osmosis resulted in the formation of the anisotropic, flow-oriented structure. The change in the types of soil particles contacts formed was observed during electro-osmosis as well. The obtained data can be used to study the behavior of soil during electro-osmosis as a function of the soil type.
Asunto(s)
Técnicas Electroquímicas/métodos , Caolín/química , Minerales/química , Suelo/química , Arcilla/química , Electrodos , Compuestos Férricos/química , Ósmosis , Porosidad , Cuarzo/química , Salinidad , Propiedades de SuperficieRESUMEN
Power output limitation is one of the main challenges that needs to be addressed for full-scale applications of the Microbial Fuel Cell (MFC) technology. Previous studies have examined electrochemical performance of different cathode electrodes including the development of novel iron based electrocatalysts, however the long-term investigation into continuously operating systems is rare. This work aims to study the application of platinum group metals-free (PGM-free) catalysts integrated into an air-breathing cathode of the microbial fuel cell operating on activated sewage sludge and supplemented with acetate as the carbon energy source. The maximum power density up to 1.3 Wm-2 (54 Wm-3) obtained with iron aminoantipyrine (Fe-AAPyr) catalyst is the highest reported in this type of MFC and shows stability and improvement in long term operation when continuously operated on wastewater. It also investigates the ability of this catalyst to facilitate water extraction from the anode and electroosmotic production of clean catholyte. The electrochemical kinetic extraction of catholyte in the cathode chamber shows correlation with power performance and produces a newly synthesised solution with a high pH > 13, suggesting caustic content. This shows an active electrolytic treatment of wastewater by active ionic and pH splitting in an electricity producing MFC.
RESUMEN
Epithelial fluid transport, an important physiological process shrouded in a long-standing enigma, may finally be moving closer to a solution. We propose that, for the corneal endothelium, relative proportions for the driving forces for fluid transport are 80% of paracellular electro-osmosis, and 20% classical transcellular osmosis. These operate in a cyclical process with a period of 9.2 s, which is dictated by the decrease and exhaustion of cellular Na+. Paracellular electro-osmosis is sketched here, and partially discussed as much as the subject still allows; transcellular osmosis is presented at length.
Asunto(s)
Ósmosis/fisiología , Transporte Biológico/fisiología , Transporte Biológico Activo/fisiología , Endotelio Corneal/metabolismo , Modelos Teóricos , Sodio/metabolismoRESUMEN
A theoretical study is presented here for the electro-osmosis modulated peristaltic three-layered capillary flow of viscous fluids with different viscosities in the layers. The layers considered here are the core layer, the intermediate layer and the peripheral layer. The analysis has been carried out under a number of physical restrictions viz. Debye-Hückel linearization (i.e. wall zeta potential ≤25mV) is assumed sufficiently small, thin electric double layer limit (i.e. the peripheral layer is much thicker than the electric double layer thickness), low Reynolds number and large wavelength approximations. A non-dimensional analysis is used to linearize the boundary value problem. Fluid-fluid interfaces, peristaltic pumping characteristics, and trapping phenomenon are simulated. Present study also evaluates the responses of interface, pressure rise, time-averaged volume flow rate, maximum pressure rise, and the influence of Helmholtz-Smoluchowski velocity on the mechanical efficiency (with two different cases of the viscosity of fluids between the intermediate and the peripheral layer). Trapping phenomenon along with bolus dynamics evolution with thin EDL effects are analyzed. The findings of this study may ultimately be useful to control the microvascular flow during the fractionation of blood into plasma (in the peripheral layer), buffy coat (intermediate layer) and erythrocytes (core layer). This work may also contributes in electrophoresis, hematology, electrohydrodynamic therapy and, design and development of biomimetic electro-osmotic pumps.
Asunto(s)
Simulación por Computador , Electroósmosis , Microcirculación , Microvasos/fisiología , Modelos Cardiovasculares , Flujo Pulsátil , Animales , Biomimética/métodos , Viscosidad Sanguínea , Humanos , Microvasos/anatomía & histología , Factores de TiempoRESUMEN
The feasibility of pressure-driven electro-dewatering (EDW) on sludge samples taken after different biological processes, stabilisation methods or mechanical dewatering techniques was assessed. First, the influence of potential values on EDW of anaerobically and aerobically stabilised, mechanically dewatered, sludge samples was investigated. Preliminary tests carried out by applying a constant potential (10, 15 and 20V) in a lab-scale device confirmed the possibility to reach a dry solid (DS) content of up to 42.9%, which corresponds to an increase of 15% of the dry content in dewatered sludge without the application of the electrical field. Dewatering increased with the applied potential but at the expense of a higher energy consumption. A potential equal to 15V was chosen as the best compromise for EDW performance, in terms of DS content and energy consumption. Then, the influence of the mechanical dewatering was studied on aerobically stabilised sludge samples with a lower initial DS content: the higher initial water content led to a lower final DS content but with a considerable reduction of energy consumption. Finally, the biological process, studied by comparing sludge samples from conventional activated sludge and membrane bioreactor processes, didn't evidence any influence on EDW. Experimental results shown that DS obtained after mechanical dewatering, volatile solids and conductivity are the main factors influencing EDW. Anaerobically digested sludge reached the highest DS content, thanks to lower organic fraction.
Asunto(s)
Electroósmosis/métodos , Aguas del Alcantarillado/análisis , Eliminación de Residuos Líquidos/métodos , Electroósmosis/instrumentaciónRESUMEN
We report results from an acute, single case study in the pig liver on the effects of a tissue ablation protocol (we named cryoelectrolysis) in which 10 min of cryosurgery, with a commercial cryosurgical probe, are delivered after 10 min of electrolysis generated by a current of about 60 mA. The histological appearance of tissue treated with cryoelectrolysis is compared with the appearance of tissue treated with 10 min of cryosurgery alone and with 10 min of electrolysis alone. Histology done after 3 h survival shows that the mixed rim of live and dead cells found around the ablated lesion in both cryosurgery and electrolytic ablation is replaced by a sharp margin between life and dead cells in cryoelectrolysis. The appearance of the dead cells in each, cryoelectrolysis, cryosurgery and electrolytic ablation is different. Obviously, this is an acute study and the results are only relevant to the conditions of this study. There is no doubt that additional acute and chronic studies are needed to strengthen and expand the findings of this study.
Asunto(s)
Criocirugía/métodos , Electrólisis/métodos , Hígado/fisiología , Hígado/cirugía , Animales , Núcleo Celular/fisiología , Supervivencia Celular , Humanos , Sus scrofa , PorcinosRESUMEN
Electro-osmosis and electrophoresis were discovered by F.â F. Reuss in Moscow in 1807. Or so the story goes. This Essay critically examines the contributions of three scientists to the discovery of electrokinetic phenomena. The evidence suggests that Reuss did indeed discover electro-osmosis, which takes its name (indirectly) from the work of Porrett. Contrary to current consensus, Gautherot made the earliest known observation of electrophoresis.
RESUMEN
We have presented prior evidence suggesting that fluid transport results from electro-osmosis at the intercellular junctions of the corneal endothelium. Such phenomenon ought to drag other extracellular solutes. We have investigated this using fluorescein-Na2 as an extracellular marker. We measured unidirectional fluxes across layers of cultured human corneal endothelial (HCE) cells. SV-40-transformed HCE layers were grown to confluence on permeable membrane inserts. The medium was DMEM with high glucose and no phenol red. Fluorescein-labeled medium was placed either on the basolateral or the apical side of the inserts; the other side carried unlabeled medium. The inserts were held in a CO2 incubator for 1 h (at 37 °C), after which the entire volume of the unlabeled side was collected. After that, label was placed on the opposite side, and the corresponding paired sample was collected after another hour. Fluorescein counts were determined with a (Photon Technology) DeltaScan fluorometer (excitation 380 nm; emission 550 nm; 2 nm bwth). Samples were read for 60 s. The cells utilized are known to transport fluid from the basolateral to the apical side, just as they do in vivo in several species. We used 4 inserts for influx and efflux (total: 20 1-h periods). We found a net flux of fluorescein from the basolateral to the apical side. The flux ratio was 1.104 ± 0.056. That difference was statistically significant (p = 0.00006, t test, paired samples). The endothelium has a definite restriction at the junctions. Hence, an asymmetry in unidirectional fluxes cannot arise from osmosis, and can only point instead to paracellular solvent drag. We suggest, once more, that such drag is due to electro-osmotic coupling at the paracellular junctions.
Asunto(s)
Fenómenos Electrofisiológicos , Endotelio Corneal/fisiología , Fluoresceína/metabolismo , Ósmosis , Transporte Biológico , Líquidos Corporales/metabolismo , Permeabilidad de la Membrana Celular , Humanos , Modelos BiológicosRESUMEN
In this work, experimental evidence of the presence of electro-osmotic flow (EOF) in carbon nanotube membranes with diameters close to or in the region of electrical double layer overlap is presented for two different electrolytes for the first time. No EOF in this region should be present according to the simplified theoretical framework commonly used for EOF in micrometre-sized channels. The simplifying assumptions concern primarily the electrolyte charge density structure, based on the Poisson-Boltzmann (P-B) equation. Here, a numerical analysis of the solutions for the simplified case and for the nonlinear and the linearized P-B equations is compared with experimental data. Results show that the simplified solution produces a significant deviation from experimental data, whereas the linearized solution of the P-B equation can be adopted with little error compared with the full P-B case. This work opens the way to using electro-osmotic pumping in a wide range of applications, from membrane-based ultrafiltration and nanofiltration (as a more efficient alternative to mechanical pumping at the nanoscale) to further miniaturization of lab-on-a-chip devices at the nanoscale for in vivo implantation.
RESUMEN
Electro-osmotic flows (EOF) have seen remarkable applications in lab-on-a-chip based microdevices owing to their lack of moving components, durability, and nondispersive nature of the flow profiles under specifically designed conditions. However, such flows may typically suffer from classical Faradaic artifacts like electrolysis of the solvent, which affects the flow rate control. Such a problem has been seen to be overcome by employing time periodic EOFs. Electric field induced transport of a conductive liquid is another nontrivial problem that requires careful study of interfacial dynamics in response to such an oscillatory flow actuation. The present study highlights the role of electric field generated Maxwell stress and free surface potential along with the electric double layer thickness and forcing frequency, toward influencing the interfacial transport and fluid flow in free-surface electro-osmosis under a periodically varying external electric field, in a semi-analytical formalism. Our results reveal interesting regimes over which the pertinent interfacial phenomena as well as bulk transport characteristics may be favorably tuned by employing time varying electrical fields.
Asunto(s)
Electroquímica , Electroósmosis , Modelos Teóricos , Electroquímica/instrumentación , Dispositivos Laboratorio en un ChipRESUMEN
The present study investigates the MHD electro-osmotic flow of entropy generation analysis for peristaltic movement in a nanofluid with temperature-dependent viscosity. Long wavelengths, i.e., The magnitude of a wave's energy corresponds directly to its frequency while being inversely related to its wavelength in terms of velocity, temperature, and concentration, govern and confine the flow stream in the laminar region. Ohmic heating and hall effects are also included. Graphs are used to obtain and examine numerical solutions for axial velocity, temperature, concentration, Bejan number, and entropy generation. The effects of this research can help to improve pumping and gastrointestinal movements in different engineering devices. Debye-Huckel and lubrication approximations are studied to access the Boltzmann distribution of electric potential across an electric double layer. The investigations of an existing model are important in illuminating the microfluidics machinery used at the micro level for various transport phenomena in which fluids as well as particles are transported together. The current study has many applications and can be further extended to a three-dimensional profile with appropriate modifications and assumptions. When studying entropy generation, it is essential to examine the irreversible factors, while also taking into account the velocity and thermal slip conditions at channel boundaries. Moreover, the concept of entropy generation holds significant importance in comprehending various biological phenomena. Hence, the current research holds promising implications for both industrial and medical fields. The entropy generation is minimum at left wall of the channel for negative values of Helmholtz-Smoluchowski velocity.
RESUMEN
Electro-osmosis offers an effective method for dewatering and remediating low permeability soil. Long-term observations on nonlinear behavior of electro-osmosis and the influencing factors are not commonly reported. Connection between cessation and direction reversal of electro-osmotic flow (EOF), and the evolution of electro-chemical parameters inside of the soil mass thus remains unclear. The dynamic response of EOF in variable charge soil could be significant, whereas the investigations on which are currently lacking. A series of electro-osmotic experiments were performed with two natural variable charge soils. The results indicated that initial electro-osmotic rate was positively proportional to electric current and initial electrical conductivity of the pore fluid, which could be explained by the ion migration model. The dynamic evolution of electro-osmotic rate and electro-chemical parameters corresponding to the solute and pH conditionings at the electrode compartments demonstrated that: 1) coupling effects of non-uniform distribution of voltage gradient and pH determined the magnitude and direction of EOF rate; 2) compared to the final pHIEP value, the bigger, close and smaller values of the novel index "voltage gradient weighed mean of spatial pHâ³ represented the forward, terminated and reversed EOF respectively; 3) the classical Helmholtz-Smoluchowski model are proved to be more applicable interpreting the coupled nonlinearity of electro-osmosis during the later steady phase. This work would facilitate future research for a comprehensive electro-osmotic model, and provide guidance to condition the initial and boundary conditions in application of electro-osmotic dewatering and electrokinetic remediation.