Assessment of the mechanical and physical characteristics of PET bricks with different aggregates.

Construction and demolition waste, along with discarded PET plastic bottles, have evolved into a widespread global resource. However, their current disposal in landfills poses a significant environmental pollution challenge. This research is centered on evaluating the performance of cement mortar composed by larger PET particles in conjunction with sand, construction and demolition waste, and lightweight expanded polystyrene aggregates. The primary objective of this study is to formulate a blend suitable for non-structural elements that can be easily manufactured for social housing construction. This modified blend extends upon the original certified mixture employed at CEVE for brick production, which encompasses cement and 3 mm-long PET particles. The experimental analysis revealed that blend containing 8 mm-long PET particles, in combination with fine aggregates of construction and demolition waste, attained a required mechanical strength of 2 MPa, while preserving the bulk density and hydric properties of the initial PET bricks developed at CEVE in Argentina.

Characteristics of expanded polystyrene microplastics on island beaches in the Pearl River Estuary: abundance, size, surface texture and their metals-carrying capacity.

While expanded polystyrene (EPS) microplastics have been widely recognized as one of the most important components of plastic litter in the intertidal zones of the global ocean, our understanding of their environmental fate on island beaches is insufficient. In this study, we intended to reveal that the latest EPS microplastic pollution status on 5 island beaches in the Pearl River Estuary, China, by comprehensively assessing the abundance, distribution, size, surface texture and carrying capacity of heavy metals (Cd, As, Cr, Ni, Cu, Pb, Mn, Fe, Al). High level of EPS microplastic abundance ranged from 328 to 82,276 particles m-2 was found, with the highest abundance at Guishan Island and the lowest at Dong'ao Island. Spatial distribution of EPS microplastic abundance was significantly different among different islands. EPS microplastics in the size range of 1-2 mm were the most abundant. The content of heavy metals in EPS microplastics collected on the beaches was greater than that in the new EPS products. The average concentrations of heavy metals in EPS microplastics from 5 islands are Cd (0.27 ± 0.19 µg g-1), As (5.50 ± 3.84 µg g-1), Cr (14.9 ± 8.25 µg g-1), Cu (15.0 ± 7.66 µg g-1), Ni (17.2 ± 17.6 µg g-1), Pb (24.8 ± 7.39 µg g-1), Mn (730 ± 797 µg g-1), Fe (8340 ± 4760 µg g-1), and Al (9624 ± 6187 µg g-1), respectively. The correlation between heavy metals in EPS microplastics and sediments was better than that between heavy metals in EPS microplastics and seawater. The study results indicated that EPS microplastics could act as a carrier for the transport of heavy metals, which might pose a threat to biological and human health.

Changes in Intestinal Microbiota Due to the Expanded Polystyrene Diet of Mealworms (Tenebrio molitor).

Expanded polystyrene (EPS), which is difficult to decompose, is usually buried or incinerated, causing the natural environment to be contaminated with microplastics and environmental hormones. Digestion of EPS by mealworms has been identified as a possible biological solution to the problem of pollution, but the complete degradation mechanism of EPS is not yet known. Intestinal microorganisms play a significant role in the degradation of EPS by mealworms, and relatively few other EPS degradation microorganisms are currently known. This study observed significant differences in the intestinal microbiota of mealworms according to the dietary results of metagenomics analysis and biodiversity indices. We have proposed two new candidates of EPS-degrading bacteria, Cronobacter sakazakii and Lactococcus garvieae, which increased significantly in the EPS feeding group population. The population change and the new two bacteria will help us understand the biological mechanism of EPS degradation and develop practical EPS degradation methods.

Photosynthesis enhancement in four marine microalgal species exposed to expanded polystyrene leachate.

Due to its widespread use, large amounts of expanded polystyrene (EPS) have been released into the marine environment, where it is broken down into small pieces with large surface areas. As such, chemical additives may be released into the environment, which can affect marine organisms; however, studies of the effects of such additives are lacking. We assessed the effects of leachate from EPS on the photosynthetic activities of four microalgal species (Dunaliella salina, Scenedesmus rubescens, Chlorella saccharophila, and Stichococcus bacillaris). They were exposed to EPS leachate for seven days and their photosynthetic activities were analyzed based on seven parameters. Overall, leachate exposure increased photosynthetic activity in all four species, albeit to different degrees and showing slightly different trends among the seven parameters. Based on chemical analysis, hexabromocyclododecane concentrations were higher in small-fragment leachate, whereas UV326 concentrations were higher in low-concentration-large-sphere leachate; bisphenol-A and total organic carbon showed no major differences among leachates. Thus, we speculate that exposure to trace chemicals influenced microalgal photosynthesis and overall growth. These results support further investigation of the impacts of plastic debris and chemical additives on marine ecosystems and organisms.

Waste management of deconstructed External Thermal Insulation Composite Systems with expanded polystyrene in the future.

External Thermal Insulation Composite Systems (ETICS), mainly comprised of expanded polystyrene (EPS) as the insulating material, have been used to insulate facades of buildings for the past few decades. In Europe, waste from ETICS deconstruction is currently disposed of in waste incineration facilities or landfills. Although the current quantities of ETICS waste are small, disposal of the increasing quantities of waste is posing a problem in some countries. New recycling strategies, such as the physico-chemical recycling of EPS or reutilisation of material and energy of all ETICS components in cement plants, offer the possibility of a circular economy for ETICS waste in the future. However, this would require a waste management chain from the construction site to the utilisation plant with appropriate waste treatment. To assess this concept further, this study documented dismantling efforts at different construction sites and conducted large-scale trials for ETICS waste treatment. The results of this study will allow the selection of suitable processing units and will be applied in a model developed by the IWARU Institute to determine economically and ecologically advantageous waste management routes that can be used to handle ETICS waste in the future.

Mechanical properties of ten-egg boxes made of different materials.

This study was conducted to evaluate mechanical properties of ten-egg boxes, which are the most commonly used egg boxes in many countries of Central and South-Eastern Europe. Six ten-egg boxes were tested, two made of cardboard, two made of expanded polystyrene and two made of general purpose solid polystyrene, each from a different producer. There were no significant differences in basic dimensions between tested boxes of various materials, while the significant differences were occurred in weight and box wall thickness. Test included measuring of vertical forces required for deforming complete box and at particular place for each egg in a box till contact with eggs. According to the obtained results, cardboard boxes can provide the best mechanical protection for eggs. The average force required for deforming complete cardboard box was 83.6% higher than for solid polystyrene box, and even 289.5% higher than for expanded polystyrene box. The average force required for deforming cardboard box at particular place for each egg in a box was 60.8% higher than for polystyrene box, and 74.0% higher than for expanded polystyrene box. The disadvantage of cardboard boxes is that they are not resistant to the impact of moisture as polystyrene boxes and in the case of an increase in box moisture due to storage in inappropriate conditions their mechanical resistance decreases.

Can community-based integrated vector control hasten the process of LF elimination?

Community-based integrated vector control (IVC) using polystyrene beads (EPS) and pyrethroid impregnated curtains (PIC) as an adjunct to mass drug administration (MDA) was implemented for lymphatic filariasis elimination, in the filaria endemic villages of Tirukoilur, south India. In all the villages, MDA was carried out by the state health machinery, as part of the national filariasis elimination programme. Thirty-six difficult-to-control villages were grouped as, viz, MDA alone, MDA + EPS and MDA + EPS + PIC arms. Implementation and monitoring of IVC was carried out by the community. After 3 years of IVC, higher reductions in filariometric indices were observed in both the community and vector population. Decline in antigenaemia prevalence was higher in MDA + IVC as compared to MDA alone arm. Vector density dropped significantly (P < 0.05) in both the IVC arms, and nil transmission was observed during post-IVC period. Almost 53.8 and 75.8 % of the cesspits in MDA + EPS and MDA + EPS + PIC arms were closed by the householders, due to the enhanced awareness on vector breeding. The paper presents the key elements of IVC implementation through social mobilization in a LF prevalent area. Thus, community-based IVC strategy can hasten LF elimination, as it reduced the transmission and filariometric indices significantly. Indices were maintained at low level with nil transmission, by the community through IVC tools.

Highly effective ultrafiltration membranes based on plastic waste for dye removal from water.

Applicable and low-cost ultrafiltration membranes based on waste polystyrene (WPS) blend and poly vinylidene fluoride (PVDF) were effectively cast on nonwoven support using phase inversion method. Analysis was done into how the WPS ratio affected the morphology and antifouling performance of the fabricated membranes. Cross flow filtration of pure water and various types of polluted aqueous solutions as the feed was used to assess the performance of the membranes. The morphology analysis shows that the WPS/PVDF membrane layer has completely changed from a spongy structure to a finger-like structure. In addition, the modified membrane with 50% WPS demonstrated that the trade-off between selectivity and permeability is met by a significant improvement in the rejection of the membrane with a reduction in permeate flux due to the addition of PVDF. With a water permeability of 50 LMH and 44 LMH, respectively, the optimized WPS-PVDF membrane with 50% WPS could reject 81% and 74% of Congo red dye (CR) and methylene blue dye (MB), respectively. The flux recovery ratio (FRR) reached to 88.2% by increasing PVDF concentration with 50% wt. Also, this membrane has the lowest irreversible fouling (Rir) value of 11.7% and lowest reversible fouling (Rr) value of 27.9%. The percent of cleaning efficiency reach to 71%, 90%, and 85% after eight cycles of humic acid (HA), CR, and MB filtration, respectively, for the modified PS-PVDF (50%-50%). However, higher PVDF values cause the membrane's pores to become clogged, increase the irreversible fouling, and decrease the cleaning efficiency. In addition to providing promising filtration results, the modified membrane is inexpensive because it was made from waste polystyrene, and as a result, it could be scaled up to treat colored wastewater produced by textile industries. PRACTITIONER POINTS: Recycling of plastic waste as an UF membrane for water/wastewater treatment was successfully prepared and investigated. Mechanical properties showed reasonable response with adding PVDF. The modified membrane with 50% PS demonstrated that the trade-off between selectivity and permeability is met by a significant improvement in the rejection.

Upcycling of Expanded Polystyrene Waste-Impregnated PVP Using Wet-Phase Inversion for Effective Microalgae Harvesting.

The aim of this study was to investigate the potential of upcycling Expanded Polystyrene (EPS) waste collected from food packaging into a membrane for microalgae harvesting, in which membrane filtration often challenges fouling and pore blocking. The target species is Spirulina platensis, with Chlorella vulgaris as a comparison agent. The membrane was fabricated from used Styrofoam, which typically ends up as single-use food packaging waste. In this study, PVP was used as an additive at varying concentrations, from 2 wt.% to 8 wt.%. The experimental results indicated that despite varying PVP concentrations, all EPS waste membranes exhibited near-complete recovery of Spirulina platensis biomass extraction. Despite the similar harvesting efficiency, EPS/PVP-8 exhibited the largest flux of 970.5 LMH/Bar, which is twice the value of the pristine EPS waste membrane. All membranes were hydrophilic; however, hydrophobicity increased with PVP concentration. SEM micrographs revealed that PVP enlarged the membrane surface pores and improved connectivity within the membrane's structure, ensuring efficient flow. The EPS waste membrane offers promising insights for sustainable materials and wastewater treatment. The upcycling of EPS waste into flat sheet membranes not only addresses the problem of Styrofoam waste accumulation but also paves the way to transform waste into valuable products.

Interactions between methyl octabromo ether flame retardant and expanded polystyrene microplastics in the photoaging process.

Expanded polystyrene (EPS) plastic is widely used because of its low density and lightweight properties, enabling it to float on water and increase its exposure to sunlight. In this study, we simulated the photoaging process of flame retardant-added EPS (FR-EPS) and common original EPS (OR-EPS) microplastic (MP) particles with and without methyl octabromoether flame retardant (MOBE) in the laboratory to explore the effect of MOBE on the photodegradation of EPS. Results showed that MOBE accelerated size reduction and surface hole formation on the particles, hastening the shedding and replacement of particle surfaces. FR-EPS particles exhibited a weight loss exceeding that of OR-EPS, reaching 40.85 ± 3.72% after 36 days of irradiation. Moreover, rapid physical peeling of the FR-EPS surface was accompanied by continuous chemical oxidation and fluctuations of the carbonyl index and O/C ratio. A diffusion model based on Fick's second law fitted well for the concentration of MOBE remaining in FR-EPS particles. MOBE's sensitivity to direct photochemical reactions inhibited the early-stage photoaging of EPS MP particles by competing for photons. However, MOBE as chromophores could absorb photons and produce •OH to promote the aging of EPS. Moreover, the capacity of EPS to absorb light energy also accelerated MOBE degradation. These findings suggested that the photoaging behavior of commercial EPS products containing flame retardants in the environment is quite different from that of pure EPS, indicating that additive-plastic interactions significantly alter MP fate and environmental risks.

Abundance and potential sources of floating polystyrene foam macro- and microplastics around Japan.

Polystyrene foam is widely used due to its lightweight, impact resistance, and excellent thermal insulation properties. Meanwhile, weak adhesion between beads in polystyrene foam leads to fragmentation, generating a substantial amount of microplastics (<5 mm). Such polystyrene foam debris littered on beaches diminishes the aesthetic value of coastal areas, negatively impacting tourism. Due to its density lower than other plastics, polystyrene foam macroplastics float on the sea surface and, thus, they are significantly influenced by wind drag during oceanic transport. In contrast, polystyrene foam microplastics drifting beneath the sea surface are carried mostly by ocean currents. These properties of polystyrene foam macroplastics and microplastics hinder the elucidation of their transport, distribution, and fate in nature, despite their potential to adversely impact marine ecosystems. To elucidate the generation, transport, and fragmentation processes of polystyrene foam ocean plastics, we conducted concurrent visual observations and surface net towing from seven training vessels around Japan during 2014-2020. Overall, the abundances of polystyrene foam ocean plastics were higher in the Sea of Japan than in the North Pacific south of Japan. The average abundances of polystyrene foam microplastics and macroplastics were 0.33 pieces/m3 and 0.45 pieces/km, respectively, over the entire sea area around Japan. In the Sea of Japan, the peak abundances of polystyrene foam macroplastics occurred in upstream of the Tsushima Current, while the peak for microplastics occurred downstream, suggesting that continuous fragmentation occurred during transport between the two peaks. Backward-in-time particle tracking model experiments suggested that the sources of polystyrene foam macroplastics observed in the Sea of Japan included aquaculture buoys and styrene debris beached around the Tsushima Strait. The present study demonstrated that reducing the release of polystyrene foam aquaculture floats will likely diminish the abundance of ocean plastics in the Sea of Japan.

Exploring the environmental impacts of plastic packaging: A comprehensive life cycle analysis for seafood distribution crates.

Annually, 8.3 million tonnes of mismanaged plastic waste enter oceans, prompting the food packaging industry, a major contributor, to minimize its environmental footprint. Within the seafood sector, a nascent number of studies are exploring the impacts of various packaging solutions for distribution, yet clear insights remain elusive. This study tries to fill the gap by comparing the impacts of two seafood packaging options: disposable expandable polystyrene (EPS) boxes and, for the first time, reusable plastic crates (RPC) crafted from high-density polyethylene. Using the life cycle assessment methodology with a 'cradle to grave' approach, the research evaluates the distribution of 1260,000 t of fish from port of Vigo (Spain) to various markets. Similar climate change values emerge in local (5.00·107 kg CO2 eq.) and regional trade (1.20·108 kg CO2 eq.) for both options, but RPCs exhibit around a 12 % increase (6.15·108 kg CO2 eq.) during national distribution, emphasizing package weight and load significance. The findings across all impact categories exhibited general consistent trends. The sensitivity analysis suggests relocating washing facilities to port could enhance RPCs´ environmental benefits for transport within a 160 km range. These findings underscore reusable packaging's potential as an eco-friendlier alternative in specific contexts, aligning with heightened environmental concerns and regulatory pressures surrounding plastic usage.

Biodegradation Mechanism of Polystyrene by Mealworms (Tenebrio molitor) and Nutrients Influencing Their Growth.

A degradation mechanism of polystyrene (PS) in mealworms reared on expanded PS (EPS) was investigated by its decrease in molecular weight and change in chemical structure. A 33% decrease in molecular weight was observed for the digested PS in the frass after 1 week of feeding to mealworms. The FT-IR and py-GC/MS spectra of the digested PS showed radical oxidative reactions taking place in the mealworm body. The presence of hydroperoxide, alcohol and phenol groups was confirmed, and dimer fragments of styrene with quinone and phenol groups were obtained. The decrease in molecular weight and the alternation of benzene rings indicated that autoxidation and quinonization via phenolic intermediates occurred simultaneously in the mealworm body. The survival rate of mealworms reared on EPS was higher than that of starved worms, indicating that EPS was a nutrient source. However, no weight gain was observed in mealworms fed EPS alone. Comparison with the mixed diets with bran or urethane foams (PU) indicated that protein, phosphorus and magnesium components absent from EPS were required for mealworm growth.

Biodegradation of polyethylene and polystyrene by Zophobas atratus larvae from Bangladeshi source and isolation of two plastic-degrading gut bacteria.

Plastic pollution has become a major environmental concern globally, and novel and eco-friendly approaches like bioremediation are essential to mitigate the impact. Low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and expanded polystyrene (EPS) are three of the most frequently used plastic types. This study examined biodegradation of these using Zophobas atratus larvae, followed by isolation and whole genome sequencing of gut bacteria collected from larvae frass. Over 36 days, 24.04 % LDPE, 20.01 % EPS, and 15.12 % LLDPE were consumed on average by the larvae, with survival rates of 85 %, 90 %, and 87 %, respectively. Fourier transform infrared spectroscopy (FTIR) analysis of fresh plastic types, consumed plastics, and larvae frass showed proof of plastic oxidation in the gut. Frass bacteria were isolated and cultured in minimal salt media supplemented with plastics as the sole carbon source. Two isolates of bacteria were sampled from these cultures, designated PDB-1 and PDB-2. PDB-1 could survive on LDPE and LLDPE as carbon sources, whereas PDB-2 could survive on EPS. Scanning Electron Microscopy (SEM) provided proof of degradation in both cases. Both isolates were identified as strains of Pseudomonas aeruginosa, followed by sequencing, assembly, and annotation of their genomes. LDPE- and LLDPE-degrading enzymes e.g., P450 monooxygenase, alkane monooxygenase, alcohol dehydrogenase, etc. were identified in PDB-1. Similarly, phenylacetaldehyde dehydrogenase and other enzymes involved in EPS degradation were identified in PDB-2. Genes of both isolates were compared with genomes of known plastic-degrading P. aeruginosa strains. Virulence factors, antibiotic-resistance genes, and rhamnolipid biosurfactant biosynthesis genes were also identified in both isolates. This study indicated Zophobas atratus larvae as potential LDPE, LLDPE, and EPS biodegradation agent. Additionally, the isolated strains of Pseudomonas aeruginosa provide a more direct and eco-friendly solution for plastic degradation. Confirmation and modification of the plastic-degrading pathways in the bacteria may create scope for metabolic engineering in the future.

The deciphering of microplastics-derived fluorescent dissolved organic matter in urban lakes, canals, and rivers using parallel factor analysis modeling and mimic experiment.

The aim of the study is to investigate the leaching of fluorescent dissolved organic matter (fDOM) from microplastics. In addition, this study identifies the connection between fDOM and microplastics in the aquatic environment. Three-dimensional excitation-emission matrix identified five fluorophores, that is, peak A, M, T, Tuv, and Wuv, and the parallel factor analysis modeling identified five components, that is, tryptophan-like, p-hydroxy acetophenone, humic acid (C-like), detergent-like, and fulvic acid (M-like) in the urban surface water. Mimic experiments using commonly used synthetic plastic (like microplastics) in Mili-Q water under solar radiation and dark environments demonstrate the release of fDOM from plastic. Two fluorophore peaks were observed at Ex/Em = 250/302 nm and Ex/Em = 260/333 nm for the expanded polystyrene plastic polymer and one fluorophore peak at Ex/Em = 260/333 nm for the low-density polyethylene. Fluorophore and component intensity exhibited notable associations with microplastics in the aquatic environment. These findings indicated that the characteristics and dynamics of fDOM in urban surface water are influenced by microplastics. PRACTITIONER POINTS: Fluorescent dissolved organic matters were identified in urban surface waters. Expanded polystyrene (EPS) had shown two fluorophores at Em/Ex = 250/302 and Em/Ex = 260/333. Low-density polyethylene (LDPE) had one fluorophore at Em/Ex = 260/333. Fluorophore and component intensity in the aquatic settings exhibited associations with microplastics.

Experimental study of fire exposed expanded polystyrene (EPS) insulation protected by selected coverings.

Insulation products made of expanded polystyrene (EPS) are commonly utilized in buildings. However, Norwegian building regulations restrict the use of such combustible insulation due to an increased risk of fire spread and generation of smoke and toxic gases. Installation of fire protection coverings has been adopted as a mitigation strategy to address these safety risks. Notably, the current regulations lack pre-approved solutions describing what is considered an adequate protection of combustible insulation. The present study investigated the fire protection properties of selected coverings used to protect EPS insulation in inner walls. Eight comparative fire tests were conducted using an indicative fire resistance test furnace. The test specimens consisted of EPS blocks mounted on a wooden frame and covered with one or two layers of selected board coverings. The specimens were positioned vertically within the test furnace, and each fire test lasted for 10 or 15 min. Test results revealed that only two configurations consisting of either two layers of 12.5 mm gypsum boards or a combination of 12 mm oriented strand board (OSB) and 12.5 mm gypsum board showed no evidence of damage to the EPS substrate after a 15-min fire exposure. Consequently, the findings suggest that a total covering thickness of at least 24.5 mm, comprising two layers of boards, is necessary to prevent adverse effects on EPS insulation. Furthermore, fire tests conducted on coverings with introduced damages and defects showed that the affected area around the damages and defects were limited. For the standard EPS substrate, this area extended from 28 mm to 90 mm, while for the fire-retardant EPS substrate from 28 mm to 75 mm after a 10-min fire exposure. These results suggest that minor physical failures in the covering have limited impact on the fire safety of the system.

Enhancing the properties of swelling soils with lime, fly ash, and expanded polystyrene -A review.

This paper discusses efforts made by past researchers to steady the expansive (problematic) soils using mechanical and chemical techniques - specifically with EPS beads, lime and fly ash. Administering swelling of problematic soils is critical for civil engineers to prevent structural distress. This paper summarizes studies on reduction of swelling potential using EPS, lime and fly ash individually. Chemical stabilization with lime and fly ash are conventional methods for expansive soil stabilization, with known merits and demerits. This paper explores the suitability of different materials under various conditions and stabilization mechanisms, including cation exchange, flocculation, and pozzolanic reactions. The degree of stabilization is influenced by various factors such as the type and amount of additives, soil mineralogy, curing temperature, moisture content during molding, and the presence of nano-silica, organic matter, and sulfates. Additionally, expanded polystyrene (EPS) improves structural integrity by compressing when surrounded clay swells, reducing overall swelling. Thus, EPS addresses limitations of chemicals by mechanical means. Combining EPS, lime and fly ash creates a customized system promoting efficient, long-lasting, cost-effective and eco-friendly soil stabilization. Chemicals address EPS limitations like poor stabilization. This paper benefits civil engineers seeking to control expansive soil swelling and prevent structural distress. It indicates potential of an EPS-lime-fly ash system and concludes by identifying research gaps for further work on such combinatorial stabilizer systems.

Achieving sustainable performance: synergistic effects of nano-silica and recycled expanded polystyrene in lightweight structural concrete.

Lightweight concrete, particularly polystyrene concrete, has been extensively utilized in civil engineering for decades. The incorporation of waste expanded polystyrene (EPS) as a filler material in the production of lightweight concrete presents significant advantages from a circular economy perspective. Prior research indicates that increasing the proportion of lightweight aggregates, such as EPS, typically results in reductions in strength and bulk density. The utilization of substantial amounts of EPS waste in the formulation of structural polystyrene concrete is crucial for advancing sustainable construction practices. This study investigates the effects of varying nano-silica content on the bulk density, compressive strength, flexural strength, splitting tensile strength, and water penetration depth of structural polystyrene concrete. Concrete specimens were prepared by substituting 25%, 50%, 75%, and 100% of sand with EPS waste, while evaluating nano-silica contents of 0.75%, 1%, and 1.25%. The findings reveal that increasing the volume fraction of EPS corresponds to a decrease in the concrete's bulk density. This research provides critical insights into optimizing structural lightweight concrete, thereby promoting advancements in sustainable construction applications.

Comparative Study on Selected Insulating Materials for Industrial Piping.

This paper describes the results of an experimental assessment of the thermal conductivity of pipe insulation. The need for reducing energy loss in industrial piping systems makes the availability of relevant and reliable insulation materials of special importance. Several specimens of pipe laggings, made of different materials, including mineral wool, polyethylene foam (PEF), expanded polystyrene (EPS), flexible elastomeric foam (FEF) and polyurethane foam (PUR), were tested in accordance with the European standard ISO 8497. The thermal conductivity of the materials was measured for a wide range of temperatures. The results were compared with the values reported in the technical specifications as well as with the literature data. The assessment of measurement uncertainty was also described. The results showed that, in a few cases, thermal conductivity turned out to be greater than that declared by the manufacturer by as much as over 10%.

Identification and quantification of photodegradation products of disposed expanded polystyrene buoy used in aquaculture.

This study investigated the chemicals extracted from an EPS buoy used in aquaculture, which were subsequently collected from a recycling center. It was observed that the chemicals generated upon photodegradation make disposed buoys more toxic. Analysis of the extracted chemicals revealed the presence of 37 compounds, with four compounds quantitatively determined. Further analysis showed that the quantity of compounds dissolved in seawater was significantly higher than the amount remaining on the buoy surface. Based on the assumption that the buoy was exposed to sunlight for a year, it was estimated that 14.44 mg of the four compounds dissolved into the ocean. Given that South Korea used over 7 million EPS buoys, photodegraded EPS buoys are expected to represent a significant source of potentially hazardous chemicals.