Creating High-entropy Single Atoms on Transition Disulfides through Substrate-induced Redox Dynamics for Efficient Electrocatalytic Hydrogen Evolution.

The controllable anchoring of multiple metal single-atoms (SAs) into a single support exhibits scientific and technological opportunities, while marrying the concentration-complex multimetallic SAs and high-entropy SAs (HESAs) into one SAC system remains a substantial challenge. Here, we present a substrate-mediated SAs formation strategy to successfully fabricate a library of multimetallic SAs and HESAs on MoS2 and MoSe2 supports, which can precisely control the doping location of SAs. Specially, the contents of SAs can continuously increase until the accessible Mo atoms on TMDs carriers are completely replaced by SAs, thus allowing the of much higher metal contents. In-depth mechanistic study shows that the well-controlled synthesis of multimetallic SAs and HESAs is realized by controlling the reversible redox reaction occurred on the TMDs/TM ion interface. As a proof-of-concept application, a variety of SAs-TMDs were applied to hydrogen evolution reaction. The optimized HESAs-TMDs (Pt,Ru,Rh,Pd,Re-MoSe2) delivers a much higher activity and durability than state of-the-art Pt. Thus, our work will broaden the family of single-atom catalysts and provide a new guideline for the rational design of high-performance single-atom catalysts.

Bottom-Up Templated and Oriented Crystallization for Inverted Triple-Cation Perovskite Solar Cells with Stabilized Nickel-Oxide Interface.

Inverted-structure perovskite solar cells (PSCs) are known for their superior device stability. However, based on nickel-oxide (NiOx ) substrate, disordered crystallization and bottom interface instability of perovskite film are still the main factors that compromise the power conversion efficiency (PCE) of PSCs. Here, 2D perovskite of thiomorpholine 1,1-dioxide lead iodide (Td2 PbI4 ) is introduced as a template to prepare 3D perovskite thin film with high crystal orientation and large grain size via a bottom-up growth method. By adding TdCl to the precursor solution, pre-crystallized 2D Td2 PbI4 seeds can accumulate at the bottom interface, lowering the barrier of nucleation, and templating the growth of 3D perovskite films with improved (100) orientation and reduced defects during crystallization. In addition, 2D Td2 PbI4 at the bottom interface also hinders the interfacial redox reaction and reduces the hole extraction barrier on the buried interface. Based on this, the Td-0.5 PSC achieves a PCE of 22.09% and an open-circuit voltage of 1.16 V. Moreover, Td-0.5 PSCs show extremely high stability, which retains 84% of its initial PCE after 500 h of continuous illumination under maximum power point operating conditions in N2 atmosphere. This work paves the way for performance improvement of inverted PSCs on NiOx substrate.

Critical Role of Removing Impurities in Nickel Oxide on High-Efficiency and Long-Term Stability of Inverted Perovskite Solar Cells.

The performance enhancement of inverted perovskite solar cells applying nickel oxide (NiOx ) as the hole transport layer (HTL) has been limited by impurity ions (such as nitrate ions). Herein, we have proposed a strategy to obtain high-quality NiOx nanoparticles via an ionic liquid-assisted synthesis method (NiOx -IL). Experimental and theoretical results illustrate that the cation of the ionic liquid can inhibit the adsorption of impurity ions on nickel hydroxide through a strong hydrogen bond and low adsorption energy, thereby obtaining NiOx -IL HTL with high conductivity and strong hole-extraction ability. Importantly, the removal of impurity ions can effectively suppress the redox reaction between the NiOx film and the perovskite film, thus slowing down the deterioration of device performance. Consequently, the modified inverted device shows a striking efficiency exceeding 22.62 %, and superior stability maintaining 92 % efficiency at a maximum power point tracking under one sun illumination for 1000 h.

Label-free genosensing of dengue serotypes with an electrodeposited reduced graphene oxide-tris(bipyridine)ruthenium(II).

Constructing a label-free electrochemical transducer platform without compromising inherent biocompatibility against specific bioreceptor remains challenging, particularly probing nucleic acid hybridization at electrode interface without external redox-mediator. Here, we show that electrochemically reduced graphene oxide-tris(bipyridine)ruthenium(II) (ErGO-TBR) nanosheets electrodeposited on carbon screen printed electrode can quantify hybridization of clinically important target sequences specific to serotypes of dengue virus (DENV) non-structural 1 (NS1) protein. Different variables including deposition potential, time, and electrolytic composition were optimized for fabrication of label-free transducer platform. Structural and electrochemical properties of ErGO-TBR/SPE were comprehensively elucidated using microscopic and spectroscopic techniques. Electrochemical quartz crystal microbalance (EQCM) analysis reveals the growth of electrodeposited redox-active species on the electrode interface. Surface functional group investigations suggested that TBR deposited on the basal and edges of ErGO substrate via electrostatic and π-π interactions. Functionalization of bio-affinity layer (B) on ErGO-TBR/SPE enables better loading of probe DNA (PDNA) toward specific detection of DENV target DNA (TDNA) with an ultralow detection limit promising for clinical diagnosis. Scalable chronoamperometry-based redox-active surface growth, customizable bioactivation strategy and external mediator-less probing of nucleic acid hybridization make the present system suitable for other translational application in healthcare diagnosis.

Pt-Embedded CuO x-CeO2 Multicore-Shell Composites: Interfacial Redox Reaction-Directed Synthesis and Composition-Dependent Performance for CO Oxidation.

Exploring the state-of-the-art heterogeneous catalysts has been a general concern for sustainable and clean energy. Here, Pt-embedded CuO x-CeO2 multicore-shell (Pt/CuO x-CeO2 MS) composites are fabricated at room temperature via a one-pot and template-free procedure for catalyzing CO oxidation, a classical probe reaction, showing a volcano-shaped relationship between the composition and catalytic activity. We experimentally unravel that the Pt/CuO x-CeO2 MS composites are derived from an interfacial autoredox process, where Pt nanoparticles (NPs) are in situ encapsulated by self-assembled ceria nanospheres with CuO x clusters adhered through deposition/precipitation-calcination process. Only Cu-O and Pt-Pt coordination structures are determined for CuO x clusters and Pt NPs in Pt/CuO x-CeO2 MS, respectively. Importantly, the close vicinity between Pt and CeO2 benefits to more oxygen vacancies in CeO2 counterparts and results in thin oxide layers on Pt NPs. Meanwhile, the introduction of CuO x clusters is crucial for triggering synergistic catalysis, which leads to high resistance to aggregation of Pt NPs and improvement of catalytic performance. In CO oxidation reaction, both Ptδ+-CO and Cu+-CO can act as active sites during CO adsorption and activation. Nonetheless, redundant content of Pt or Cu will induce a strongly bound Pt-O-Ce or Cu-[O x]-Ce structures in air-calcinated Pt/CuO x-CeO2 MS composites, respectively, which are both deleterious to catalytic reactivity. As a result, the composition-dependent catalytic activity and superior durability of Pt/CuO x-CeO2 MS composites toward CO oxidation reaction are achieved. This work should be instructive for fabricating desirable multicomponent catalysts composed of noble metal and bimetallic oxide composites for diverse heterogeneous catalysis.