Light3DHS: A lightweight 3D hippocampus segmentation method using multiscale convolution attention and vision transformer.

The morphological analysis and volume measurement of the hippocampus are crucial to the study of many brain diseases. Therefore, an accurate hippocampal segmentation method is beneficial for the development of clinical research in brain diseases. U-Net and its variants have become prevalent in hippocampus segmentation of Magnetic Resonance Imaging (MRI) due to their effectiveness, and the architecture based on Transformer has also received some attention. However, some existing methods focus too much on the shape and volume of the hippocampus rather than its spatial information, and the extracted information is independent of each other, ignoring the correlation between local and global features. In addition, many methods cannot be effectively applied to practical medical image segmentation due to many parameters and high computational complexity. To this end, we combined the advantages of CNNs and ViTs (Vision Transformer) and proposed a simple and lightweight model: Light3DHS for the segmentation of the 3D hippocampus. In order to obtain richer local contextual features, the encoder first utilizes a multi-scale convolutional attention module (MCA) to learn the spatial information of the hippocampus. Considering the importance of local features and global semantics for 3D segmentation, we used a lightweight ViT to learn high-level features of scale invariance and further fuse local-to-global representation. To evaluate the effectiveness of encoder feature representation, we designed three decoders of different complexity to generate segmentation maps. Experiments on three common hippocampal datasets demonstrate that the network achieves more accurate hippocampus segmentation with fewer parameters. Light3DHS performs better than other state-of-the-art algorithms.

Manipulation of Conducting Polymer Hydrogels with Different Shapes and Related Multifunctionality.

Maneuver of conducting polymers (CPs) into lightweight hydrogels can improve their functional performances in energy devices, chemical sensing, pollutant removal, drug delivery, etc. Current approaches for the manipulation of CP hydrogels are limited, and they are mostly accompanied by harsh conditions, tedious processing, compositing with other constituents, or using unusual chemicals. Herein, a two-step route is introduced for the controllable fabrication of CP hydrogels in ambient conditions, where gelation of the shape-anisotropic nano-oxidants followed by in-situ oxidative polymerization leads to the formation of polyaniline (PANI) and polypyrrole hydrogels. The method is readily coupled with different approaches for materials processing of PANI hydrogels into varied shapes, including spherical beads, continuous wires, patterned films, and free-standing objects. In comparison with their bulky counterparts, lightweight PANI items exhibit improved properties when those with specific shapes are used as electrodes for supercapacitors, gas sensors, or dye adsorbents. The current study therefore provides a general and controllable approach for the implementation of CP into hydrogels of varied external shapes, which can pave the way for the integration of lightweight CP structures with emerging functional devices.

Recent Advances in MXene-Based Aerogels for Electromagnetic Wave Absorption.

Developing lightweight, high-performance electromagnetic wave (EMW) absorbing materials those can absorb the adverse electromagnetic radiation or waves are of great significance. Transition metal carbides and/or nitrides (MXenes) are a novel type of 2D nanosheets associated with a large aspect ratio, abundant polar functional groups, adjustable conductivity, and remarkable mechanical properties. This contributes to the high-efficiency assembly of MXene-based aerogels possessing the ultra-low density, large specific surface area, tunable conductivity, and unique 3D porous microstructure, which is beneficial for promoting the EMW absorption. Therefore, MXene-based aerogels for EMW absorption have attracted widespread attention. This review provides an overview of the research progress on MXene-based aerogels for EMW absorption, focusing on the recent advances in component and structure design strategies, and summarizes the main strategies for constructing EMW absorbing MXene-based aerogels. In addition, based on EMW absorption mechanisms and structure regulation strategies, the preparation methods and properties of MXene-based aerogels with varieties of components and pore structures are detailed to advance understanding the relationships of composition-structure-performance. Furthermore, the future development and challenges faced by MXene-based aerogels for EMW absorption are summarized and prospected.

Organic-Inorganic Copolymerization Induced Oriented Crystallization for Robust Lightweight Porous Composite.

Porous composites are important in engineering fields for their lightweight, thermal insulation, and mechanical properties. However, increased porosity commonly decreases the robustness, making a trade-off between mechanics and weight. Optimizing the strength of solid structure is a promising way to co-enhance the robustness and lightweight properties. Here, acrylamide and calcium phosphate ionic oligomers are copolymerized, revealing a pre-interaction of these precursors induced oriented crystallization of inorganic nanostructures during the linear polymerization of acrylamide, leading to the spontaneous formation of a bone-like nanostructure. The resulting solid phase shows enhanced mechanics, surpassing most biological materials. The bone-like nanostructure remains intact despite the introduction of porous structures at higher levels, resulting in a porous composite (P-APC) with high strength (yield strength of 10.5 MPa) and lightweight properties (density below 0.22 g cm-3). Notably, the density-strength property surpasses most reported porous materials. Additionally, P-APC shows ultralow thermal conductivity (45 mW m-1 k-1) due to its porous structure, making its strength and thermal insulation superior to many reported materials. This work provides a robust, lightweight, and thermal insulating composite for practical application. It emphasizes the advantage of prefunctionalization of ionic oligomers for organic-inorganic copolymerization in creating oriented nanostructure with toughened mechanics, offering an alternative strategy to produce robust lightweight materials.

3D-Printed Mullite-Reinforced SiC-Based Aerogel Composites.

There is a growing demand for thermal management materials in electronic fields. Aerogels have attracted interest due to their extremely low density and extraordinary thermal insulation properties. However, the application of aerogels is limited by high production costs and the requirement that aerogel structures not be load-bearing. In this study, mullite-reinforced SiC-based aerogel composite (MR-SiC AC) is prepared through 3D printing combined with in situ growth of SiC nanowires in post processing. The fabricated MR-SiC AC not only has ultra-low thermal conductivity (0.021 W K m-1) and high porosity (90.0%), but also a high Young's modulus (24.4 MPa) and high compressive strength (1.65 MPa), both exceeding the measurements of existing resilient aerogels by an order of magnitude. These properties make MR-SiC AC an ideal solution for the precision thermal management of lightweight structures having complex geometry for functional devices.

Next-Generation Ultrathin Lightweight Electrode for pH-Universal Aqueous Flow Batteries.

Aqueous flow batteries (AFBs) are promising long-duration energy storage system owing to intrinsic safety, inherent scalability, and ultralong cycle life. However, due to the thicker (3-5 mm) and heavier (300-600 g m-2) nature, the current used graphite felt (GF) electrodes still limit the volume/weight power density of AFBs. Herein, a lightweight (≈50 g m-2) and ultrathin (≈0.3 mm) carbon microtube electrode (CME) is proposed derived from a scalable one-step carbonization of commercial cotton cloth. The unique loose woven structure composed of carbon microtube endows CME with excellent conductivity, abundant active sites, and enhanced electrolyte transport performance, thereby significantly reducing polarization in working AFBs. As a consequence, CME demonstrates excellent cycling performance in pH-universal AFBs, including acidic vanadium flow battery (maximum power density of 632.2 mW cm-2), neutral Zn-I2 flow battery (750 cycles with average Coulombic efficiency of 99.6%), and alkaline Zn-Fe flow battery (energy efficiency over 70% at 200 mA cm-2). More importantly, the estimated price of CME is only 5% of GF (≈3 vs ≈60 $ m-2). Therefore, it is reasonably anticipated that the lightweight and ultrathin CME may emerge as the next generation electrode for AFBs.

Molormer: a lightweight self-attention-based method focused on spatial structure of molecular graph for drug-drug interactions prediction.

Multi-drug combinations for the treatment of complex diseases are gradually becoming an important treatment, and this type of treatment can take advantage of the synergistic effects among drugs. However, drug-drug interactions (DDIs) are not just all beneficial. Accurate and rapid identifications of the DDIs are essential to enhance the effectiveness of combination therapy and avoid unintended side effects. Traditional DDIs prediction methods use only drug sequence information or drug graph information, which ignores information about the position of atoms and edges in the spatial structure. In this paper, we propose Molormer, a method based on a lightweight attention mechanism for DDIs prediction. Molormer takes the two-dimension (2D) structures of drugs as input and encodes the molecular graph with spatial information. Besides, Molormer uses lightweight-based attention mechanism and self-attention distilling to process spatially the encoded molecular graph, which not only retains the multi-headed attention mechanism but also reduces the computational and storage costs. Finally, we use the Siamese network architecture to serve as the architecture of Molormer, which can make full use of the limited data to train the model for better performance and also limit the differences to some extent between networks dealing with drug features. Experiments show that our proposed method outperforms state-of-the-art methods in Accuracy, Precision, Recall and F1 on multi-label DDIs dataset. In the case study section, we used Molormer to make predictions of new interactions for the drugs Aliskiren, Selexipag and Vorapaxar and validated parts of the predictions. Code and models are available at https://github.com/IsXudongZhang/Molormer.

A Lightweight Convolutional Neural Network Based on Dynamic Level-Set Loss Function for Spine MR Image Segmentation.

BACKGROUND: Spine MR image segmentation is important foundation for computer-aided diagnostic (CAD) algorithms of spine disorders. Convolutional neural networks segment effectively, but require high computational costs. PURPOSE: To design a lightweight model based on dynamic level-set loss function for high segmentation performance. STUDY TYPE: Retrospective. POPULATION: Four hundred forty-eight subjects (3163 images) from two separate datasets. Dataset-1: 276 subjects/994 images (53.26% female, mean age 49.02 ± 14.09), all for disc degeneration screening, 188 had disc degeneration, 67 had herniated disc. Dataset-2: public dataset with 172 subjects/2169 images, 142 patients with vertebral degeneration, 163 patients with disc degeneration. FIELD STRENGTH/SEQUENCE: T2 weighted turbo spin echo sequences at 3T. ASSESSMENT: Dynamic Level-set Net (DLS-Net) was compared with four mainstream (including U-net++) and four lightweight models, and manual label made by five radiologists (vertebrae, discs, spinal fluid) used as segmentation evaluation standard. Five-fold cross-validation are used for all experiments. Based on segmentation, a CAD algorithm of lumbar disc was designed for assessing DLS-Net's practicality, and the text annotation (normal, bulging, or herniated) from medical history data were used as evaluation standard. STATISTICAL TESTS: All segmentation models were evaluated with DSC, accuracy, precision, and AUC. The pixel numbers of segmented results were compared with manual label using paired t-tests, with P < 0.05 indicating significance. The CAD algorithm was evaluated with accuracy of lumbar disc diagnosis. RESULTS: With only 1.48% parameters of U-net++, DLS-Net achieved similar accuracy in both datasets (Dataset-1: DSC 0.88 vs. 0.89, AUC 0.94 vs. 0.94; Dataset-2: DSC 0.86 vs. 0.86, AUC 0.93 vs. 0.93). The segmentation results of DLS-Net showed no significant differences with manual labels in pixel numbers for discs (Dataset-1: 1603.30 vs. 1588.77, P = 0.22; Dataset-2: 863.61 vs. 886.4, P = 0.14) and vertebrae (Dataset-1: 3984.28 vs. 3961.94, P = 0.38; Dataset-2: 4806.91 vs. 4732.85, P = 0.21). Based on DLS-Net's segmentation results, the CAD algorithm achieved higher accuracy than using non-cropped MR images (87.47% vs. 61.82%). DATA CONCLUSION: The proposed DLS-Net has fewer parameters but achieves similar accuracy to U-net++, helps CAD algorithm achieve higher accuracy, which facilitates wider application. EVIDENCE LEVEL: 2 TECHNICAL EFFICACY: Stage 1.

Investigations on lightweight concrete by in situ compression tests using high-resolution computed tomography (µ-CT).

The fracture behaviour of concrete is studied in various micro- and macro-damage models. This is important for estimating serviceability and stability of concrete structures. However, a detailed understanding of the material behaviour under load is often not available. In order to better interpret the fracture behaviour and pattern, images of lightweight concrete were taken using a high-resolution computed tomography (µ-CT) scanner. The samples were loaded between the taken images and the load was kept constant during the measurement. This study describes the method used and how the data set was analysed to investigate displacements and cracks. It has been shown that displacements and damage to the concrete structure can be detected prior to failure, allowing conclusions to be drawn about the structural behaviour. In principle, the µ-CT measurement can be used to examine different kinds of concrete as well as other systems with inorganic binders and to compare the fracture behaviour of different systems.

Meta-analysis of the effectiveness of early endoscopic treatment of Acute biliary pancreatitis based on lightweight deep learning model.

BACKGROUND: Acute biliary pancreatitis (ABP) is a clinical common acute abdomen. After the first pancreatitis, relapse rate is high, which seriously affects human life and health and causes great economic burdens to family and society. According to a great many research findings, endoscopic retrograde cholangiopancreatography (ERCP) is an effective treatment method. However, whether ERCP should be performed in early stage of ABP is still controversial in clinical practice. METHODS: Related articles were retrieved from Pubmed, Web of Science core library, Nature, Science Direct, and other databases published from January 2000 until now. The keywords included early ERCP, delayed ERCP, ABP, laparoscopy, and cholecystectomy, all which were connected by "or" and "and". The language of articles was not restricted during the retrieval and Review Manager5.3 was employed to perform meta-analysis of experimental data. Finally, a total of 8 eligible articles were selected, including 8,801 patients. RESULTS: The results of the meta-analysis demonstrated that no remarkable differences were detected in the incidence of complications, mortality, and operation time between patients undergoing ERCP in early stage and those receiving delayed ERCP. However, the hospitalization time of patients in experimental group was notably shorter than that among patients in control group. CONCLUSINS: Early ERCP treatment is as safe as late ERCP treatment for biliary pancreatitis, and can significantly shorten the hospital stay. Hence, the therapy was worthy of clinical promotion. The research findings provided reference and basis for clinical treatment of relevant diseases.

An auxiliary diagnostic tool for common fundus diseases based on fundus color photography and light-weight classification models.

OBJECTIVE: To evaluate the performance of two lightweight neural network models in the diagnosis of common fundus diseases and make comparison to another two classical models. METHODS: A total of 16,000 color fundus photography were collected, including 2000 each of glaucoma, diabetic retinopathy (DR), high myopia, central retinal vein occlusion (CRVO), age-related macular degeneration (AMD), optic neuropathy, and central serous chorioretinopathy (CSC), in addition to 2000 normal fundus. Fundus photography was obtained from patients or physical examiners who visited the Ophthalmology Department of Beijing Tongren Hospital, Capital Medical University. Each fundus photography has been diagnosed and labeled by two professional ophthalmologists. Two classical classification models (ResNet152 and DenseNet121), and two lightweight classification models (MobileNetV3 and ShufflenetV2), were trained. Area under the curve (AUC), sensitivity, specificity, accuracy, positive predictive value, and negative predictive value were used to evaluate the performance of the four models. RESULTS: Compared with the classical classification model, the total size and number of parameters of the two lightweight classification models were significantly reduced, and the classification speed was sharply improved. Compared with the DenseNet121 model, the ShufflenetV2 model took 50.7% less time to make a diagnosis on a fundus photography. The classical models performed better than lightweight classification models, and Densenet121 showed highest AUC in five out of the seven common fundus diseases. However, the performance of lightweight classification models is satisfying. The AUCs using MobileNetV3 model to diagnose AMD, diabetic retinopathy, glaucoma, CRVO, high myopia, optic atrophy, and CSC were 0.805, 0.892, 0.866, 0.812, 0.887, 0.868, and 0.803, respectively. For ShufflenetV2model, the AUCs for the above seven diseases were 0.856, 0.893, 0.855, 0.884, 0.891, 0.867, and 0.844, respectively. CONCLUSION: The training of light-weight neural network models based on color fundus photography for the diagnosis of common fundus diseases is not only fast but also has a significant reduction in storage size and parameter number compared with the classical classification model, and can achieve satisfactory accuracy.

A multi-slice attention fusion and multi-view personalized fusion lightweight network for Alzheimer's disease diagnosis.

OBJECTIVE: Alzheimer's disease (AD) is a type of neurological illness that significantly impacts individuals' daily lives. In the intelligent diagnosis of AD, 3D networks require larger computational resources and storage space for training the models, leading to increased model complexity and training time. On the other hand, 2D slices analysis may overlook the 3D structural information of MRI and can result in information loss. APPROACH: We propose a multi-slice attention fusion and multi-view personalized fusion lightweight network for automated AD diagnosis. It incorporates a multi-branch lightweight backbone to extract features from sagittal, axial, and coronal view of MRI, respectively. In addition, we introduce a novel multi-slice attention fusion module, which utilizes a combination of global and local channel attention mechanism to ensure consistent classification across multiple slices. Additionally, a multi-view personalized fusion module is tailored to assign appropriate weights to the three views, taking into account the varying significance of each view in achieving accurate classification results. To enhance the performance of the multi-view personalized fusion module, we utilize a label consistency loss to guide the model's learning process. This encourages the acquisition of more consistent and stable representations across all three views. MAIN RESULTS: The suggested strategy is efficient in lowering the number of parameters and FLOPs, with only 3.75M and 4.45G respectively, and accuracy improved by 10.5% to 14% in three tasks. Moreover, in the classification tasks of AD vs. CN, AD vs. MCI and MCI vs. CN, the accuracy of the proposed method is 95.63%, 86.88% and 85.00%, respectively, which is superior to the existing methods. CONCLUSIONS: The results show that the proposed approach not only excels in resource utilization, but also significantly outperforms the four comparison methods in terms of accuracy and sensitivity, particularly in detecting early-stage AD lesions. It can precisely capture and accurately identify subtle brain lesions, providing crucial technical support for early intervention and treatment.

Quality of life in breast reconstruction: a comparison of lightweight and conventional breast implants.

BACKGROUND: Due to the declining mortality rates of breast carcinoma and the rising incidence of risk-reducing mastectomies, enhancing the quality of life after breast reconstructions has become an increasingly important goal. The advantages of lightweight breast implants (B-Lite®) may significantly contribute to achieving this objective. This study aims to investigate whether lightweight implants are suitable for patients undergoing breast reconstruction and could improve the quality of life in comparison to conventional implants. METHODS: In this study, we retrospectively analyzed 48 patients (38 implants in each group) who underwent implant-based breast reconstruction with either B-Lite® or conventional breast implants between 2019 and 2022 at the University Center for Plastic Surgery in Regensburg. As part of the postoperative follow-up, a clinical examination and a survey using the Breast-Q® questionnaire were conducted to evaluate the postoperative quality of life. RESULTS: The implants used were similar in weight and shape. On average, the B-Lite® implants had a higher implant volume and patients in this group had a slightly higher BMI. Patients who received B-Lite® implants showed a significantly better result regarding the sensation of sensitivity in the surgical area and the scar formation also appeared to be more favorable. However, patients with B-Lite® implants perceived their implants as more uncomfortable than those with conventional breast implants. In other terms concerning quality of life, both groups appeared similar. CONCLUSION: In summary, there are confounding factors that could influence the outcome of some aspects in this study, which could not be avoided due to the retrospective study design and the temporary suspension of B-Lite implants. Nevertheless, as the first of its kind, this study demonstrated that B-Lite implants could also be suitable for usage in breast reconstructions, thus providing an important foundation for further prospective studies to build upon.

Detection of Coal and Gangue Based on Improved YOLOv8.

To address the lightweight and real-time issues of coal sorting detection, an intelligent detection method for coal and gangue, Our-v8, was proposed based on improved YOLOv8. Images of coal and gangue with different densities under two diverse lighting environments were collected. Then the Laplacian image enhancement algorithm was proposed to improve the training data quality, sharpening contours and boosting feature extraction; the CBAM attention mechanism was introduced to prioritize crucial features, enhancing more accurate feature extraction ability; and the EIOU loss function was added to refine box regression, further improving detection accuracy. The experimental results showed that Our-v8 for detecting coal and gangue in a halogen lamp lighting environment achieved excellent performance with a mean average precision (mAP) of 99.5%, was lightweight with FLOPs of 29.7, Param of 12.8, and a size of only 22.1 MB. Additionally, Our-v8 can provide accurate location information for coal and gangue, making it ideal for real-time coal sorting applications.

A Lightweight Vehicle Detection Method Fusing GSConv and Coordinate Attention Mechanism.

Aiming at the problems of target detection models in traffic scenarios including a large number of parameters, heavy computational burden, and high application cost, this paper introduces an enhanced lightweight real-time detection algorithm, which exhibits higher detection speed and accuracy for vehicle detection. This paper considers the YOLOv7 algorithm as the benchmark model, designs a lightweight backbone network, and uses the MobileNetV3 lightweight network to extract target features. Inspired by the structure of SPPF, the spatial pyramid pooling module is reconfigured by incorporating GSConv, and a lightweight SPPFCSPC-GS module is designed, aiming to minimize the quantity of model parameters and enhance the training speed even further. Furthermore, the CA mechanism is integrated to enhance the feature extraction capability of the model. Finally, the MPDIoU loss function is utilized to optimize the model's training process. Experiments showcase that the refined YOLOv7 algorithm can achieve 98.2% mAP on the BIT-Vehicle dataset with 52.8% fewer model parameters than the original model and a 35.2% improvement in FPS. The enhanced model adeptly strikes a finer equilibrium between velocity and precision, providing favorable conditions for embedding the model into mobile devices.

Lightweight Vehicle Detection Based on Improved YOLOv5s.

A vehicle detection algorithm is an indispensable component of intelligent traffic management and control systems, influencing the efficiency and functionality of the system. In this paper, we propose a lightweight improvement method for the YOLOv5 algorithm based on integrated perceptual attention, with few parameters and high detection accuracy. First, we propose a lightweight module IPA with a Transformer encoder based on integrated perceptual attention, which leads to a reduction in the number of parameters while capturing global dependencies for richer contextual information. Second, we propose a lightweight and efficient multiscale spatial channel reconstruction (MSCCR) module that does not increase parameter and computational complexity and facilitates representative feature learning. Finally, we incorporate the IPA module and the MSCCR module into the YOLOv5s backbone network to reduce model parameters and improve accuracy. The test results show that, compared with the original model, the model parameters decrease by about 9%, the average accuracy (mAP@50) increases by 3.1%, and the FLOPS does not increase.

CM-YOLOv8: Lightweight YOLO for Coal Mine Fully Mechanized Mining Face.

With the continuous development of deep learning, the application of object detection based on deep neural networks in the coal mine has been expanding. Simultaneously, as the production applications demand higher recognition accuracy, most research chooses to enlarge the depth and parameters of the network to improve accuracy. However, due to the limited computing resources in the coal mining face, it is challenging to meet the computation demands of a large number of hardware resources. Therefore, this paper proposes a lightweight object detection algorithm designed specifically for the coal mining face, referred to as CM-YOLOv8. The algorithm introduces adaptive predefined anchor boxes tailored to the coal mining face dataset to enhance the detection performance of various targets. Simultaneously, a pruning method based on the L1 norm is designed, significantly compressing the model's computation and parameter volume without compromising accuracy. The proposed algorithm is validated on the coal mining dataset DsLMF+, achieving a compression rate of 40% on the model volume with less than a 1% drop in accuracy. Comparative analysis with other existing algorithms demonstrates its efficiency and practicality in coal mining scenarios. The experiments confirm that CM-YOLOv8 significantly reduces the model's computational requirements and volume while maintaining high accuracy.

Human Pose Estimation Based on Efficient and Lightweight High-Resolution Network (EL-HRNet).

As an important direction in computer vision, human pose estimation has received extensive attention in recent years. A High-Resolution Network (HRNet) can achieve effective estimation results as a classical human pose estimation method. However, the complex structure of the model is not conducive to deployment under limited computer resources. Therefore, an improved Efficient and Lightweight HRNet (EL-HRNet) model is proposed. In detail, point-wise and grouped convolutions were used to construct a lightweight residual module, replacing the original 3 × 3 module to reduce the parameters. To compensate for the information loss caused by the network's lightweight nature, the Convolutional Block Attention Module (CBAM) is introduced after the new lightweight residual module to construct the Lightweight Attention Basicblock (LA-Basicblock) module to achieve high-precision human pose estimation. To verify the effectiveness of the proposed EL-HRNet, experiments were carried out using the COCO2017 and MPII datasets. The experimental results show that the EL-HRNet model requires only 5 million parameters and 2.0 GFlops calculations and achieves an AP score of 67.1% on the COCO2017 validation set. In addition, PCKh@0.5mean is 87.7% on the MPII validation set, and EL-HRNet shows a good balance between model complexity and human pose estimation accuracy.

Lightweight Hash-Based Authentication Protocol for Smart Grids.

Smart grids integrate information and communications technology into the processes of electricity production, transportation, and consumption, thereby enabling interactions between power suppliers and consumers to increase the efficiency of the power grid. To achieve this, smart meters (SMs) are installed in households or buildings to measure electricity usage and allow power suppliers or consumers to monitor and manage it in real time. However, SMs require a secure service to address malicious attacks during memory protection and communication processes and a lightweight communication protocol suitable for devices with computational and communication constraints. This paper proposes an authentication protocol based on a one-way hash function to address these issues. This protocol includes message authentication functions to address message tampering and uses a changing encryption key for secure communication during each transmission. The security and performance analysis of this protocol shows that it can address existing attacks and provides 105,281.67% better computational efficiency than previous methods.

DV3-IBi_YOLOv5s: A Lightweight Backbone Network and Multiscale Neck Network Vehicle Detection Algorithm.

Vehicle detection is a research direction in the field of target detection and is widely used in intelligent transportation, automatic driving, urban planning, and other fields. To balance the high-speed advantage of lightweight networks and the high-precision advantage of multiscale networks, a vehicle detection algorithm based on a lightweight backbone network and a multiscale neck network is proposed. The mobile NetV3 lightweight network based on deep separable convolution is used as the backbone network to improve the speed of vehicle detection. The icbam attention mechanism module is used to strengthen the processing of the vehicle feature information detected by the backbone network to enrich the input information of the neck network. The bifpn and icbam attention mechanism modules are integrated into the neck network to improve the detection accuracy of vehicles of different sizes and categories. A vehicle detection experiment on the Ua-Detrac dataset verifies that the proposed algorithm can effectively balance vehicle detection accuracy and speed. The detection accuracy is 71.19%, the number of parameters is 3.8 MB, and the detection speed is 120.02 fps, which meets the actual requirements of the parameter quantity, detection speed, and accuracy of the vehicle detection algorithm embedded in the mobile device.