Premature gray hair development in the interbrow region owing to the loss of maxillary first molars in young mice.

The exact sites of premature hair graying and whether tooth loss causes this condition remain unknown. In this study, we aimed to explore the effect of reduced mastication on premature hair graying. Maxillary first molars were extracted from young mice, and the mice were observed for 3 months, along with non-extraction control group mice. After 3 months, gray hair emerged in the interbrow region of mice in the tooth extraction group but not in the control group. The expression of tyrosinase-related protein-2 (TRP-2) mRNA was lower in the interbrow tissues of young mice without maxillary molars than in those with maxillary molars. Tooth loss leads to interbrow gray hair growth, possibly because of weakened trigeminal nerve input, suggesting that reduced mastication causes premature graying. Thus, prompt prosthetic treatment after molar loss is highly recommended.

Sinus membrane thickness of healthy endodontically treated maxillary molars.

OBJECTIVE: The study aimed to investigate the sinus membrane thickness (SMT) adjacent to healthy endodontically-treated maxillary molars with or without protruded apical foramen into the sinus cavity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Images of 207 non-smoker patients aged 18-40 were retrospectively analyzed, 140 were endodontically treated, and 136 were without endodontic treatment. Patients with any sinus pathology, teeth that have symptoms, or poor root filling were excluded. Study groups consisted of Group EM-I (endodontically treated and protruded apical foramen), Group EM-C (endodontically treated and contacted apical foramen), and similarly without endodontic treatment; Group M-I and Group M-C. SMT upon the mesial, distal, and palatal roots was measured. One-way ANOVA and Student's t-tests were performed. RESULTS: Group EM-I had the thickest sinus membrane compared to other groups (p = 0.013). SMT values were 2.37-2.60 mm in Group EM-I, and 1.34-1.58 mm in other groups. Thickening (> 2 mm) percentages were 33.45% in Group EM-I and between 4.25 and 8.25% in other groups. No statistical difference was detected between first and second molars and genders (p > 0.05). CONCLUSION: When the apical foramen protruded into the sinus cavity, the conventional root canal treatment caused a minimal (between 2.37 mm and 2.60 mm) sinus membrane thickening with a rate of 33.45% based upon CBCT examinations.

Orthodontic maxillary molar movement-induced zygomatic pillar remodeling and its consequences on occlusal characteristics and stress distribution.

OBJECTIVE: We aimed to evaluate changes in the zygomatic pillar during orthodontic treatment involving premolar extraction, analyze the effects of maxillary first molar movement on zygomatic pillar remodeling, and examine occlusal characteristics and stress distribution after remodeling. METHODS: Twenty-five patients who underwent premolar extraction were included in the study. The zygomatic pillar measurement range was defined, and cross-sectional areas, surface landmark coordinates, alveolar and cortical bone thicknesses, and density changes were assessed using Mimics software based on the cone-beam computed tomography scans taken before (T0) and after the treatment (T1). Multiple linear regression analysis was performed to determine the correlation between changes in the zygomatic pillar and maxillary first molar three-dimensional (3D) movement and rotation. Additionally, the correlation between pillar remodeling and occlusal characteristics was analyzed by Teetester. Pre- and post-reconstruction 3D finite element models were constructed and loaded with an average occlusal force of two periods. RESULTS: The morphological and structural remodeling of the zygomatic pillar after orthodontic treatment involving premolar extraction showed a decreased cross-sectional area of the lower segment of the zygomatic pillar. The zygomatic process point moved inward and backward, whereas the zygomatico-maxillary suture point moved backward. The thicknesses of the zygomatic pillar alveolar and cortical bones were thinner, and reduced alveolar bone density was observed. Simultaneously, the movement and angle change of the maxillary first molar could predict zygomatic pillar reconstruction to a certain extent. With decreasing the total occlusal force and the occlusal force of the first molar, occlusal force distribution was more uniform. With zygomatic pillar remodeling, occlusal stress distribution in the zygomatic alveolar ridge decreased, and occlusal stress was concentrated at the junction of the vertical and horizontal parts of the zygomatic bone and the posterior part of the zygomatic arch. CONCLUSIONS: Orthodontic treatment involving premolar extraction led to zygomatic pillar remodeling, making it more fragile than before and reducing the occlusal force of the maxillary first molar and the entire dentition with stress concentrated in weak areas. CLINICAL RELEVANCE: No other study has focused on the effects of orthodontics on pillar structures. The present study indicates that the mesial movement of the maxillary first molar weakened the zygomatic pillar and reduced occlusal function, thereby providing insights for inserting anchorage screws and facial esthetics.

Biomechanical analysis of miniscrew-assisted molar distalization with clear aligners: a three-dimensional finite element study.

BACKGROUND/OBJECTIVES: To compare the biomechanical characteristics of maxillary molar distalization with clear aligners in conjunction with three types of miniscrew anchorage. MATERIALS/METHODS: Three-dimensional (3D) finite element models of maxillary molar distalization with clear aligners and three types of miniscrew anchorage were established, including (A) control group, (B) direct buccal miniscrew anchorage group, (C) direct palatal miniscrew anchorage group, and (D) indirect buccal miniscrew anchorage group. The 3D displacement of maxillary teeth and the principal stress (maximum tensile and compressive stress) on the root and periodontal ligament (PDL) during molar distalization were recorded. RESULTS: The tooth displacement pattern during maxillary molar distalization in the four groups showed similarities, including labial tipping of anterior teeth, mesial and buccal tipping of premolars, and distal and buccal tipping of molars, but with varying magnitudes. Group C exhibited the greatest molar distalization, with the first molar achieving 0.1334 mm of crown distalization. Group D demonstrated a notable buccal crown movement (0.0682 mm) and intrusion (0.0316 mm) of the first premolar. Compared to Groups A and B, Groups C and D showed less labial crown tipping of the central incisor. Group B showed the greatest amount of maxillary incisor intrusion (central incisor: 0.0145 mm, lateral incisor: 0.0094 mm). Moreover, Groups C and D displayed significantly lower levels of compressive and tensile stress in the roots and PDL of the maxillary central and lateral incisors. LIMITATION: Molar distalization is a dynamic process involving sequential tooth movement stages; however, our research primarily examined the tooth movement patterns in the initial aligner. CONCLUSIONS/IMPLICATIONS: The use of miniscrew anchorage, especially direct palatal miniscrew anchorage, may enhance the treatment efficacy of maxillary molar distalization with clear aligners, leading to increased molar distalization, reduced mesial movement of premolars, and minimized labial tipping of anterior teeth.

[Root canal therapy of maxillary molars with atypical canals: A report of three cases].

Maxillary molar with three roots and 3 to 4 canals is a common occurrence. However, in addition to common root canal anatomy, there may be significant differences in the number, distribution, and morphological structure of root canals. The success of root canal treatment is dependent on ensuring that all the intricate details associated with it are meticulously followed. Failure to locate all canals could have a negative effect on the treatment as it may lead to initiation or continuation of periapical pathology. Missed canals were the main reason for patients reporting back for nonsurgical root canal retreatment. Moreover, the bacteria residing in such canals could also result in persistence of symptoms. Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This article presents three cases of endodontic management of maxillary molars with atypical canal morphology. In the three cases of this study, the patients underwent cone beam computed tomographic (CBCT) examination before root canal treatment. The CBCT images revealed that the maxillary molars in case 1 and case 2 had 5 canals. Case 1: 2 mesiobuccal (MB, MB2), two distobuccal (DB and DB2), and one palatal canal. Case 2: 2 mesiobuccal (MB, MB2), one distobuccal (DB), and two palatal canals (MP and DP). In case 3, CBCT scan slices showed that the maxillary first molar presented as a C-shaped root canal with a rare tooth anomaly of taurodontism. Although C-shaped root canals were most frequently seen in the mandibular second molar, they might also appear in maxillary molars. A literature search revealed only a few case reports of C-shaped root canal systems in maxillary molars. Case 3 described the fusion between mesiobuccal and palatal roots of the maxillary first molar, forming a C-shaped mesiopalatal root canal. The above cases suggest that endodontists should always be aware of aberrancies in root canal system apart from the knowledge of normal root canal anatomy. CBCT as a means of diagnosis can be helpful for identifying and managing these complex root canal systems. This case series also highlights the importance of magnification and illumination. Through using an endodontic microscope, clinicians can identify root canals that are difficult to locate or overlooked with normal vision. A correct access opening is a most important step to locate and negotiate the orifices of root canals. The use of ultrasonic tips can refine the access cavity and allow controlled and delicate removal of calcifications and other interferences to the canal orifices, thereby helping to locate the extra orifices.

Clinical, radiographic characterizations and complications of maxillary molar in a periodontitis population: a retrospective study based on CBCT radiography.

OBJECTIVE: This study was aimed to delineate the clinical, CBCT radiographic characteristics, and complications of maxillary molar in a periodontitis population. MATERIALS AND METHODS: Medical records and CBCT images were utilized to identify adult patients with periodontitis in a tertiary referral dental hospital between June 2019 and December 2020. CBCT scan images were used to characterize the detailed bone thickness, absorbing height, and position of maxillary molar as well as their associated conditions. All relevant descriptive epidemiological data, clinical information, radiographic details, and associated complications were recorded and statistically analyzed. RESULTS: According to the above criteria, 577 eligible periodontitis patients were enrolled and defined as research cohort here with mean age 45 ± 4.8 years. Male patients outnumbered females with a gender ratio of 1.23:1. Our results demonstrated that the bone loss of maxillary first molar was more serious than that of second molar with tooth position symmetry. The occurrence of various complications (periodontal abscess, pulp lesions, furcation lesion, and mucosal thickening) was significantly correlated to periodontal-related clinical parameters of maxillary molar. CONCLUSIONS: Our results demonstrated the more serious bone loss of maxillary first molar with tooth position symmetry. The occurrence of various complications was significantly correlated to periodontal-related clinical parameters. Our findings offer valuable information concerning the clinical, radiographic characteristics, and complications of maxillary molar in a periodontitis population. CLINICAL RELEVANCE: These findings are beneficial for clinicians to comprehensively understand the bone status, pathogenesis, and clinical management of maxillary molar in periodontitis.

Pulpal anesthesia of maxillary first molars using 4% articaine infiltration in patients with symptomatic irreversible pulpitis: a randomized controlled clinical trial.

OBJECTIVES: This study aimed to compare the anesthetic efficacy of 1.8 mL (one cartridge) and 3.6 mL (two cartridges) buccal infiltration and buccal plus palatal infiltration of 4% articaine in maxillary first molar teeth with symptomatic irreversible pulpitis. MATERIALS AND METHODS: This randomized single-blind clinical trial was conducted on 45 patients with symptomatic irreversible pulpitis of maxillary first molars (Trial Registration No: IRCT2015011020238N2_2015). The patients were randomly divided into three groups (n = 15) for buccal infiltration of 1.8 mL articaine plus 1:100,000 epinephrine (group 1), buccal infiltration of 3.6 mL articaine (group 2), and buccal infiltration of 1.8 mL articaine plus palatal infiltration of 0.5 mL articaine (group 3). The pain intensity was measured by the Heft-Parker visual analog scale (VAS) during injection and during access cavity preparation. No pain or mild pain during treatment was considered as successful anesthesia. Data were analyzed by the Tukey's post hoc test. RESULTS: The three groups had a significant difference in frequency of the perceived pain during injection (P = 0.01). A higher volume of 4% articaine and injection of articaine in both buccal and palatal sides provided a significantly higher anesthesia success rate (P = 0.049 and P < 0.01, respectively). The highest success rate was recorded in group 3 (93.33%) followed by group 2 (80%) and then group 1 (53.33%). CONCLUSIONS: Increasing the administered volume of 4% articaine with 1:100,000 epinephrine and addition of palatal infiltration to buccal infiltration of articaine can significantly increase the success of anesthesia in maxillary first molars with symptomatic irreversible pulpitis. CLINICAL RELEVANCE: Achieving deep anesthesia in teeth with irreversible pulpitis is a critical parameter in management of patients who are in urgent need of root canal treatments.

Comparative analysis of dimensional alterations following extraction of maxillary molars using three-dimensional images' superimposition: a CBCT study.

The aims of this study were to (i) evaluate the bone alterations following maxillary molar extraction and (ii) identify the factors associated with bone alterations using a tomographic analysis. Cone Beam Computer Tomographies (CBCTs) of 17 subjects with 25 maxillary molars were analyzed, before and, in average, 12 months following extraction. Fifty CBCTs were segmented as 3D models that were used as reference for analysis. Cross-sectional planes were established to measure the dimensional changes in the vertical, horizontal aspects, and the area of the alveolar bone. Associations between root divergence, initial bone location related to the maxillary sinus, and the thickness of buccal and palatal bone at baseline was assessed using mixed-effect models. Overall, the average reduction in vertical bone height was 35.23% (2.61 ± 1.76 mm). The mean reduction of area of alveolar process and horizontal bone width were 18.89% (56.08 ± 44.23 mm2) and 65.10% (8.33 ± 4.51 mm), respectively. There was a marginal significant association between horizontal bone changes and the thickness of palatal bone (p = 0.05). The results of the present study indicated that following maxillary molar extraction, significant dimensional changes occur in both the vertical and horizontal directions. The vertical changes were mainly attributed to remodeling on the coronal aspect of the alveolar ridge and sinus pneumatization was rare.

The MB3 canal in maxillary molars: a micro-CT study.

OBJECTIVES: To assess the internal and external morphologies of the mesiobuccal (MB) root of maxillary molars presenting a third root canal (MB3), using micro-computed tomography (micro-CT). MATERIAL AND METHODS: Two-hundred and sixty-five extracted maxillary first and second molars with different root configurations were imaged in a micro-CT scanner at 19.6-µm pixel size. Sixteen teeth presenting MB3 canal were selected and evaluated regarding root configuration, minimal dentine thickness 2 mm under the furcation area, canal configuration of the MB root, MB3 canal morphology (location, independent or confluent orifice, and anatomy types), and the apical anatomy (aspect ratio, number of accessory canals and foramina, presence of isthmus, and independent MB3 foramen). RESULTS: Overall, a high variability in canal configuration was detected in the MB root. MB3 canal was observed in 10 maxillary first molars and 6 maxillary second molars (n = 16). Minimal dentine thickness related to the MB3 canal at the coronal third was smaller than that of the MB1 canal. A complex internal anatomy comprising 13 different root canal configurations was observed. A high number of independent MB3 orifices at the pulp chamber floor was observed in the first molars (7 out of 10 teeth), while most of the specimens (n = 14) showed a confluent anatomy of the MB3 canal. A varied number of accessory canals and foramina were observed. At the apical third, isthmus could be observed in 6 specimens, while an independent MB3 foramen was present in 37.5% of the MB roots. CONCLUSIONS: MB3 canal is a rare anatomical variation present in maxillary first and second molars. Its presence can be associated to a complex internal anatomy of the MB root which includes the presence of isthmuses and multiple accessory canals and foramina at the apical third, but also a thin dentine thickness at the coronal third and a confluent anatomy of the MB3 with the other main canals.

Comparison of Treatment Effects with Modified C-Palatal Plates vs Greenfield Molar Distalizer Appliances in Adolescents.

Objectives: The aim of study was to evaluate skeletodental and soft tissue treatment effects and the amount of maxillary molar distalization with modified C-palatal plates vs. Greenfield molar distalizer appliances in adolescents. Study design: The samples consisted of pre- and posttreatment lateral cephalograms collected from 39 patients with Class II malocclusion. The MCPP group was comprised of 21 patients (mean age: 11.7 ± 1.3 years) treated with MCPP appliances while the GMD group included 18 patients (mean age: 11.2 ± 0.9 years) treated with GMD. Fixed orthodontic treatment started with the distalization process in both groups. From each cephalograpm, twenty-nine variables were measured for analysis and then the two groups were compared. Descriptive statistics, a paired t-test, and multivariate analysis of variance were performed to compare the treatment effects within and between the groups. Results: There was significant treatmentrelated change in the sagittal position of the maxilla and the mandible within each group. However, there were no statistically significant inter-group differences. The mean maxillary first molar distalization was 3.96 mm in the MCPP group vs. 2.85 mm in the GMD group. Both groups showed minimal distal tipping, but the maxillary incisors were significantly extruded by 3.04 ± 0.89 mm (P < .001) in GMD group. There was no significant difference in treatment duration between the groups. Conclusions: The maxillary first molars of both the MCPP and GMD groups were effectively distalized and there were significant skeletal changes in the maxilla. However, the maxillary incisors were significantly extruded in the GMD group.

Investigating the anatomical relationship between the maxillary molars and the sinus floor in a Chinese population using cone-beam computed tomography.

BACKGROUND: The anatomical relationship between the root apices of maxillary molars and the maxillary sinus floor (MSF) is important for the treatment of dental implantations and endodontic procedures. In this study, the detailed anatomical relationships between the root apices of maxillary molars and the MSF were studied in a Chinese population using CBCT. METHODS: We collected the CBCT data files of patients who visited the stomatology outpatient clinic in Shanghai Fifth People's Hospital, Fudan University from January 1, 2017 to January 1, 2019 and measured the following items: the distance between the molar root apices and the MSF, the thickness of the mucosa and cortical bone of the MSF closest to the root apices, and the angle between the buccal and palatal roots. RESULTS: The shortest distances between the root apices and the MSF were 1.57 ± 3.33 mm (the mesiobuccal root of the left second molar) and 1.61 ± 3.37 mm (the mesiobuccal root of the right second molar). Apical protrusion over the inferior wall of the sinus most often occurred in the mesiobuccal root of left second molar (frequency, 20.5%). The mucosa of the MSF was thinnest at the distobuccal root of the right second molar (1.52 ± 0.85 mm), the cortical bone of the MSF was thinnest at the mesiobuccal root of the right second molar (0.46 ± 0.28 mm), and the angle between the buccal and palatal roots ranged from 12.01° to 124.2° (42.36 ± 24.33 °). CONCLUSIONS: Among the root apices of the maxillary molars, the mesiobuccal root apex of the left second molar was closest to the MSF, and it had the highest incidence of protrusion into the sinus. The unique anatomical relationship between the maxillary molars and the MSF in this Chinese population is critical for treatment planning for dental implantation or endodontic procedures.

A Modified Technique for Extraction Site Closure of the Maxillary Molars in a Dog.

Performing oral surgery in dogs can present unique challenges. Among those challenges are the varying size and anatomical shape of the oral cavity in veterinary patients. Very small dogs and brachycephalic breeds provide limited exposure to the caudal maxilla. With the addition of an endotracheal tube and tie, the operating window can be quite limited and difficult to visualize and instrument. The following is a simple yet effective step-by-step procedure of tension-free closure of maxillary molar extractions in the dog.

The morphology of maxillary first and second molars analyzed by cone-beam computed tomography in a polish population.

BACKGROUND: The success of endodontic treatment is greatly affected by the location of the root canals. The purpose of this study was to evaluate the root and canal morphology of permanent maxillary first and second molars in a Polish population using cone-beam computed tomography scanning. METHODS: Cone-beam computed tomography (CBCT) scans of maxillary first and second molars the maxilla were examined. The number of roots and root canals, and the frequency of additional canals (MB2) in the mesiobuccal root canals were determined. The results were subjected to statistical analysis using the chi-square test or the chi-square test with Yates' correction. RESULTS: A total of 112 CBCT images of maxillary first (n = 185) and second molars (n = 207) from 112 patients were analyzed. All the maxillary first molars had three roots (100%). The majority of maxillary second molars had three roots (91.8%), 5.8% had two roots and 2.4% had one root. A statistically significant difference was observed between the numbers of roots in the maxillary first and second molars (p < 0.01). A statistically significant difference was also found in the distribution of the number of canals in the maxillary first and second molars (p < 0.001). The majority of maxillary first molars had four root canals (59.5%), while 40.5% had three root canals. Most maxillary second molars had three root canals (70%). Additional canals (MB2) in the mesiobuccal roots were detected significantly more frequently in the maxillary first molars than the second molars (p = 0.000) and more frequently in men than in women (p < 0.05). A higher prevalence of two canals in the mesiobuccal roots in maxillary second molars occurred in patients aged between 31 and 40 years than in patients aged between 21 and 30 years. In the maxillary first molars, the prevalence of the MB2 canal in the mesiobuccal root was almost equally distributed in the two age groups (21-30 and 31-40 years). CONCLUSION: Within the limitations of this study, it can be concluded that there are differences in the number and configuration of roots and root canals between maxillary first and second molars in the studied patients of a Polish population.

CBCT uses in clinical endodontics: the effect of CBCT on the ability to locate MB2 canals in maxillary molars.

AIM: To determine whether a CBCT volume can aid in the location of MB2 canals in maxillary molars. METHODOLOGY: This prospective clinical study involved 50 patients that needed RCT on a maxillary molar. The teeth where the MB2 was located upon access with the dental operating microscope received routine root canal treatment, and teeth where MB2 was not located had a CBCT volume made after instrumenting the located canals. At the second appointment, the clinician used the aid of the CBCT volume and troughing to attempt to locate MB2. RESULTS: The clinicians located MB2 upon initial access in 70% (n = 35) of teeth. In the remaining 15 teeth, CBCT and troughing located MB2 53% of the time in that group (8/15 teeth). Overall, MB2 was located in 86% of the 50 first and second maxillary molars (maxillary first molars 90% and maxillary second molars 73%). A total of 15 CBCT volumes were made, and of these teeth, 33% of MB2 canals (5/15 teeth) were visualized on the CBCT volume. CONCLUSIONS: This prospective clinical study showed that the effectiveness of using CBCT to locate additional MB2 canals in maxillary molars appears limited. The use of the dental operating microscope in conjunction with selective troughing and CBCT imaging allowed clinicians to locate 90% (maxillary first molars) and 73% (maxillary second molars) of MB2 canals.

Anatomical considerations for implant placements in first maxillary molar extracted sites in East Asian patients.

PURPOSE: With the advent of cone-beam computed tomography (CBCT) for maxillofacial imaging, there has been a paradigm shift from two dimensional panoramic radiography to three dimensional imaging. This study investigated the microanatomy of the maxillary permanent first molar socket and its relationship to the floor of the maxillary sinus, especially for immediate or early implant placement. MATERIALS AND RESULTS: Sixty CBCT scans of 30 Malay and 30 Chinese subjects were selected from over 300 archived images. Ninety-five percent of the subjects had sinus floor extending anterior to the first molar, while 72% had the floor dipping between the roots. Seventy-five percent of the patients had inter-radicular bone and almost 50% had intrusion of root apices into the floor of the maxillary sinus. The dimensions of the socket were as follows: the mean width was 11.42 ± 0.86 mm; the mean length was 7.70 ± 0.56 mm; the mean height on the coronal plane was 6.48 ± 3.77 mm while on the sagittal plane it was 6.85 ± 3.67 mm. CONCLUSIONS: Any implant length greater than the mean height of the socket (approximately 7 mm) has a fair chance of perforation into the maxillary sinus if placed without any additional adjunct procedures. In addition, 50% of the apices opened into the maxillary sinus, thereby risking the creation of perforations or root displacements into the maxillary sinus during exodontia-mandating CBCT scanning prior to any surgical implant procedures.

Anatomic relationship between the root apex of maxillary molars and maxillary sinus in the presence of antagonist teeth: A Kwak's method with divisions.

OBJECTIVE: The purpose of the study was to evaluate the proximity between the root apices of maxillary molars and maxillary sinus floor using cone-beam computed tomography (CBCT) in the southern Turkish subpopulation. DESIGN: For the study, 246 CBCT images were analyzed. The absence of antagonist teeth was excluded. Kwak's types III and V were detailed with three divisions. Division M; the penetration of the mesial root only, Division D; the penetration of the distal root only, and Division MD; the penetration of both buccal roots. The distance between the maxillary sinus and the root apices was measured. Student's t-test, one-way ANOVA, and chi-square were used for statistical analysis. RESULTS: The penetration of maxillary molars was 24.40%. The highest prevalence belonging to Type I. Division MD was 44.35% for Type III and 40.42% for Type V. Division M was higher than Division D. The distances between the sinus and root apices were 1.35-2.41 mm in Type I. The distance decreased with age (p < 0.05). CONCLUSION: Both buccal root penetration into the sinus was higher than the single root penetration. The distance of the second molar root apices to the sinus was closer than the first molar. One-quarter of the first and second molars were inside the sinus. A greater likelihood of penetration of the root apices into the sinus with increased age.

Assessing the Impact of the Metal Artifact Reduction Tool on Detecting Furcation Lesions in Maxillary Molars with Different Intracanal Posts: An Ex Vivo Cone-beam Computed Tomography Study.

INTRODUCTION: Considering the potential image compromise and diagnostic challenges posed by metals, this study aimed to assess the efficacy of the metal artifact reduction (MAR) tool in cone-beam computed tomography examinations for detecting furcation lesions in upper molars treated endodontically and restored with different intracanal posts. METHODS: This ex vivo study used 45 endodontically treated maxillary first molars, categorized into the following3 groups (n = 15): control (without intracanal post), metal post, and fiberglass post. Simulations were conducted in the laboratory to replicate alveolar bone, periodontal ligament, and grade I, II, and III furcation lesions. Cone-beam computed tomography scans were obtained with and without the MAR tool, and the furcation lesions were evaluated considering a 5-point Likert scale. Data were analyzed at 5%. RESULTS: In the control group, there was no influence of MAR (P > .05); grade II lesions were not diagnosed, and grade III lesions were the most detected (P < .05). In the metal post group with MAR, grade III lesions were diagnosed more frequently than I and II (P < .05) and grade III without MAR (P < .05). In the fiberglass post group, the diagnosis of grade I lesions decreased with MAR (P < .05), and without MAR, grade III was most diagnosed (P < .05); grade III lesions were the most diagnosed (P < .05). CONCLUSIONS: The MAR tool was only effective for diagnosing grade III furcation lesions, regardless of the intracanal material. Its application for grade I and II lesions did not contribute to improved diagnosis. Furthermore, in the fiberglass post group with grade I lesions, the MAR tool negatively affected the detection of the lesions.

Comparative biomechanical analysis of four different tooth- and bone-borne frog appliances for molar distalization : A three-dimensional finite element study.

PURPOSE: The purpose of this study was to analyze the biomechanical effects of four different designs of frog appliances for molar distalization using finite element analysis. METHODS: A three-dimensional finite element model including complete dentition, periodontal ligament, palatine, and alveolar bone was established. Four types of frog appliances were designed to simulate maxillary molar distalization: tooth-button-borne (Type A), bone-borne (Type B), bone-button-borne (Type C), and tooth-bone-borne (Type D) frog appliances. A force of 10 N was applied simulating a screw in the anteroposterior direction. To assess the von Mises stress distribution and the resultant displacements in the teeth and periodontal tissues, geometric nonlinear theory was utilized. RESULTS: Compared to the conventional tooth-borne frog appliance (Type A), the bone-borne frog appliances showed increased first molar distalization with enhanced mesiolingual rotation and distal tipping, but the labial inclination and intrusion of the incisors were insignificant. When replacing the palatal acrylic button with miniscrews (Types B and D), more anchorage forces were transmitted from the first premolar to palatine bone, which was further dispersed by the assistance of a palatal acrylic button (Type C). CONCLUSIONS: Compared to tooth-borne frog appliances, the bone-borne variants demonstrated a clear advantage for en masse molar distalization. The combined anchorage system utilizing palatal acrylic buttons and miniscrews (Type C) offers the most efficient stress distribution, minimizing force concentration on the palatine bone.

Two Palatal Roots in Maxillary First Molar, a Rare Entity: Report of Two Cases.

An in-depth understanding of the anatomical variations of maxillary molars is essential for endodontic success. Unlike the maxillary second molars, the presence of a second palatal root is uncommon in the first maxillary molar. This case report describes two cases of non-surgical management of maxillary molars with extra palatal roots. Careful clinical examination, knowledge of the internal anatomy, and the use of advanced radiographic modalities like cone beam computed tomography (CBCT) can reveal the presence of variations in the internal and external anatomy of any tooth. Therefore, for nonsurgical as well as surgical management clinicians should always watch out for any deviations in a tooth and utilize all the available tools to diagnose and manage them successfully.

A Rare Case of Single-Rooted Maxillary First Molar With Type II Canal Configuration.

The morphological variations in roots and root canals vary greatly in multi-rooted teeth making it a challenge for accurate diagnosis and effective endodontic therapy. In addition to using technology appropriately, this article highlights how important it is to have a complete understanding of root canal morphology. With the assistance of cone-beam computed tomography (CBCT) images and a dental operating microscope (DOM), successful endodontic treatment was performed on a single-rooted maxillary first molar with Vertucci's type II canal configuration. CBCT and DOM proved to be valuable tools for the effective diagnosis and management of this atypical morphology.