Engineering Three-Dimensional Interconnected Pores with Plentiful Edge Sites via a Confined Space for Enhanced Oxygen Reduction.

N-Doped carbon sheets based on edge engineering provide more opportunities for improving oxygen reduction reaction (ORR) active sites. However, with regard to the correlation between porous structural configurations and performances, it remains underexplored. Herein, a silica-assisted localized etching method was employed to create two-dimensional mesoporous carbon materials with customizable pore structures, abundant edge sites, and nitrogen functionalities. The mesoporous carbon exhibited superior electrocatalytic performance for the ORR compared to that of a 20 wt % Pt/C catalyst, achieving a half-wave potential of 0.88 V versus RHE, situating them in the leading level of the reported carbon electrocatalysts. Experimental data suggest that the edge graphitic nitrogen sites played a crucial role in the ORR process. The three-dimensional interconnected pores provided a high density of active sites for the ORR and facilitated the efficient transport of electrons. These unique properties make the carbon sheets a promising candidate for highly efficient air cathodes in rechargeable Zn-air batteries.

In-Plane Topological-Defect-Enriched Graphene as an Efficient Metal-Free Catalyst for pH-Universal H2O2 Electrosynthesis.

Developing efficient metal-free catalysts to directly synthesize hydrogen peroxide (H2O2) through a 2-electron (2e) oxygen reduction reaction (ORR) is crucial for substituting the traditional energy-intensive anthraquinone process. Here, in-plane topological defects enriched graphene with pentagon-S and pyrrolic-N coordination (SNC) is synthesized via the process of hydrothermal and nitridation. In SNC, pentagon-S and pyrrolic-N originating from thiourea precursor are covalently grafted onto the basal plane of the graphene framework, building unsymmetrical dumbbell-like S─C─N motifs, which effectively modulates atomic and electronic structures of graphene. The SNC catalyst delivers ultrahigh H2O2 productivity of 8.1, 7.3, and 3.9 mol gcatalyst -1 h-1 in alkaline, neutral, and acidic electrolytes, respectively, together with long-term operational stability in pH-universal electrolytes, outperforming most reported carbon catalysts. Theoretical calculations further unveil that defective S─C─N motifs efficiently optimize the binding strength to OOH* intermediate and substantially diminish the kinetic barrier for reducing O2 to H2O2, thereby promoting the intrinsic activity of 2e-ORR.

Tunable Metal-Free Imidazole-Benzimidazole Electrocatalysts for Oxygen Reduction in Aqueous Solutions.

A series of metal-free imidazole-benzimidazole catalysts (ImBenz-H, ImBenz-NO2 , ImBenz-OCH3 ) for oxygen reduction reaction (ORR) were prepared. We demonstrate that the electrocatalytic O2 reduction by ImBenz-NO2 with the electron-withdrawing group showed high selectivity toward H2 O with the number of electrons transferred (n=3.7) in a neutral aqueous solution. The highest ORR selectivity toward H2 O2 was achieved using ImBenz-H (n=2.4) in an alkaline solution. Electrochemical studies of reaction kinetics disclosed that the highest turnover frequencies were obtained from ImBenz-H in both neutral and alkaline aqueous solutions. The results prove that the ORR selectivity is tunable by modulating the substituent of the ImBenz catalysts. Furthermore, DFT calculations suggested that the ORR mechanism of ImBenz-H involves the electron transfer from imidazole-benzimidazole to O2 resulting in the formation of H2 O2 which supports the redox active properties of the catalysts ImBenz.

Selective Nitrate Electroreduction to Ammonia on CNT Electrodes with Controllable Interfacial Wettability.

The development of electrocatalysts that can efficiently reduce nitrate (NO3-) to ammonia (NH3) has garnered increasing attention due to their potential to reduce carbon emissions and promote environmental protection. Intensive efforts have focused on catalyst development, but a thorough understanding of the effect of the microenvironment around the reactive sites of the catalyst is also crucial to maximize the performance of the electrocatalysts. This study explored an electrocatalytic system that utilized quaternary ammonium surfactants with a range of alkyl chain lengths to modify an electrode made of carbon nanotubes (CNT), with the goal of regulating interfacial wettability toward NO3- reduction. Trimethyltetradecylammonium bromide with a moderate alkyl chain length created a very hydrophobic interface, which led to a high selectivity in the production of NH3 (∼87%). Detailed mechanistic investigations that used operando Fourier-transform infrared (FTIR) spectroscopy and online differential electrochemical mass spectrometry (DEMS) revealed that the construction of a hydrophobic modified CNT played a synergistic role in suppressing a side reaction involving the generation of hydrogen, which would compete with the reduction of NO3-. This electrocatalytic system led to a favorable process for the reduction of NO3- to NH3 through a direct electron transfer pathway. Our findings underscore the significance of controlling the hydrophobic surface of electrocatalysts as an effective means to enhance electrochemical performance in aqueous media.

Triazine Frameworks for the Photocatalytic Selective Oxidation of Toluene.

Investigations into the selective oxidation of inert sp3 C-H bonds using polymer photocatalysts under mild conditions have been limited. Additionally, the structure-activity relationship of photocatalysts often remains insufficiently explored. Here, a series of thiophene-based covalent triazine frameworks (CTFs) are used for the efficient and selective oxidation of hydrocarbons to aldehydes or ketones under ambient aerobic conditions. Spectroscopic methods conducted in situ and density functional theory (DFT) calculations revealed that the sulfur atoms within the thiophene units play a pivotal role as oxidation sites due to the generation of photogenerated holes. The effect of photogenerated holes on photocatalytic toluene oxidation was investigated by varying the length of the spacer in a CTF donor-acceptor based photocatalyst. Furthermore, the manipulation of reactive oxygen species was employed to enhance selectivity by weakening the peroxidative capacity. As an illustrative example, this study successfully demonstrated the synthesis of a precursor of the neurological drug AMG-579 using a photocatalytic protocol.

In Situ Synthesis of Doped Bio-Graphenes as Effective Metal-Free Catalysts in Removal of Antibiotics: Effect of Natural Precursor on Doping, Morphology, and Catalytic Activity.

Wastewater contaminated with antibiotics is a major environmental challenge. The oxidation process is one of the most common and effective ways to remove these pollutants. The use of metal-free, green, and inexpensive catalysts can be a good alternative to metal-containing photocatalysts in environmental applications. We developed here the green synthesis of bio-graphenes by using natural precursors (Xanthan, Chitosan, Boswellia, Tragacanth). The use of these precursors can act as templates to create 3D doped graphene structures with special morphology. Also, this method is a simple method for in situ synthesis of doped graphenes. The elements present in the natural biopolymers (N) and other elements in the natural composition (P, S) are easily placed in the graphene structure and improve the catalytic activity due to the structural defects, surface charges, increased electron transfers, and high absorption. The results have shown that the hollow cubic Chitosan-derived graphene has shown the best performance due to the doping of N, S, and P. The Boswellia-derived graphene shows the highest surface area but a lower catalytic performance, which indicates the more effective role of doping in the catalytic activity. In this mechanism, O2 dissolved in water absorbs onto the positively charged C adjacent to N dopants to create oxygenated radicals, which enables the degradation of antibiotic molecules. Light irradiation increases the amount of radicals and rate of antibiotic removal.

Highly Efficient Oxygen Reduction N-Doped Carbon Nanosheets Were Prepared by Hydrothermal Carbonization.

A metal-free carbon catalyst is a kind of oxygen reduction catalyst with great prospects. It is an important material with potential to replace the traditional Pt catalyst. In this paper, a kind of irregular and ultra-thin carbon nanosheet (K180M-300-900) with high catalytic activity was synthesized by hydrothermal calcination using okra as a biomass and NH4Cl as an N source. The prepared nitrogen-doped metal-free catalyst with high pyridine-N and graphitic-N provides an extremely large number of active sites and has certain lattice defects. Ultra-thin carbon nanosheets promote sufficient contact between the catalyst and electrolyte, promote the diffusion of oxygen, and result in a faster transfer rate of electrons. The initial potential and half-slope potential of K180M-300-900 are 0.99 V and 0.82 V, respectively, which are comparable to those of 20% Pt/C. In addition, the stability and methanol tolerance of this catalyst (K180M-300-900) are better than 20% Pt/C, so it has great development potential and application value. This result provides a new method to prepare metal-free carbon materials that will take the place of traditional Pt catalysts.

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells.

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm-2 . DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks.

Thermocatalysis of CO2 into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal-organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO2 thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO2 conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO2 reaction. The advantages of using noble-metal-free MOF catalysts for CO2 conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO2 conversion.

In-situ synthesis of non-phase-separated boron carbon nitride for photocatalytic reduction of CO2.

Non-phase-separated hexagonal boron carbon nitride (h-BCN) is an emerging type of promising metal-free photocatalyst, but the synthesis of this material remains quite challenging. Here, h-BCN without phase separation was obtained through a novel organic-inorganic hybrid precursor pyrolysis method using boric acid and ethylenediamine as raw materials. The resultant BCN-1 exhibited excellent photocatalytic activity for CO2 reduction, as confirmed by a CO generation rate of 13.97 µmol g-1 h-1 under visible light illumination with no co-catalyst or sacrificial agent. This rate was 9.4 times higher than that of g-C3N4 (2.1 µmol g-1 h-1) under the same experimental condition. The pre-existing C-N-B bond is essential for mediating the growth kinetics and diminishing the thermodynamically preferred C and BN phase-segregation structure, while ammonia is crucial for C-N-B bond fixation and pore formation during the pyrolysis process. This finding of a facile method for synthesizing non-phase-separated BCN has positive effects on the study of photocatalytic CO2 reduction by sustainable metal-free catalysts.

Efficient Hydrogen Evolution on Nanoscale Graphdiyne.

Self-active metal-free graphdiyne (GDY) is used, which has a precise chemical structure, as a model carbon-based metal-free electrocatalyst to assess its activity in the hydrogen evolution reaction (HER) and to understand the origin of electrocatalytic performance at the atomic level. The studies reveal that the unusual electrocatalytic properties of GDY originate from its unique nanostructure, which can simultaneously provide highly active sites for hydrogen adsorption and facilitate the electron-transfer process for proton reduction. Accordingly, GDY can act as a metal-free efficient HER electrocatalyst with Pt-like HER activity, but with long-term durability superior to that of Pt/C under the wide pH range (from acidic to basic). To the best of knowledge, such HER performance is better than that of other reported metal-free electrocatalysts and most transition-metal electrocatalysts-even Pt-based ones.

Porous Organic Phenanthroline-Based Polymer as an Efficient Transition-Metal-Free Heterogeneous Catalyst for Direct Aromatic C-H Activation.

Direct C-H bond transformation has been regarded as one of the most important areas in organic synthesis in both academia and industry. However, the heterogeneous transition-metal-free catalysis of direct C-H bond transformation has remained a contemporary challenge. To tackle this challenge, we designed and constructed a porous phenanthroline-based polymer (namely POP-Phen) via free radical polymerization of vinyl-functionalized phenanthroline monomers. POP-Phen shows excellent catalytic performances in transition-metal-free catalyzed C-H arylation, even better than those of the corresponding homogeneous catalyst, which is mainly attributed to the high density of catalytically active sites in the heterogeneous catalyst. Kinetic isotope experiments and spectral characterizations demonstrate the electron-transfer between the heterogeneous catalyst and the base (t-BuOK), a key step for C-H activation. We believe that this porous organic phenanthroline polymer could open a new door for the design of novel heterogeneous transition-metal-free catalysts for direct C-H activation.

Understanding of catalytic ROS generation from defect-rich graphene quantum-dots for therapeutic effects in tumor microenvironment.

Owing to their low cost, high catalytic efficiency and biocompatibility, carbon-based metal-free catalysts (C-MFCs) have attracted intense interest for various applications, ranging from energy through environmental to biomedical technologies. While considerable effort and progress have been made in mechanistic understanding of C-MFCs for non-biomedical applications, their catalytic mechanism for therapeutic effects has rarely been investigated. In this study, defect-rich graphene quantum dots (GQDs) were developed as C-MFCs for efficient ROS generation, specifically in the H2O2-rich tumor microenvironment to cause multi-level damages of subcellular components (even in nuclei). While a desirable anti-cancer performance was achieved, the catalytic performance was found to strongly depend on the defect density. It is for the first time that the defect-induced catalytic generation of ROS by C-MFCs in the tumor microenvironment was demonstrated and the associated catalytic mechanism was elucidated. This work opens a new avenue for the development of safe and efficient catalytic nanomedicine.

Towards Advances in Molecular Understanding of Boric Acid Biocatalyzed Ring-Opening (Co)Polymerization of δ-Valerolactone in the Presence of Ethylene Glycol as an Initiator.

Following our previous studies on the molecular level structure of (co)oligoesters obtained via anionic homo- and co-polymerization of novel ß-substituted ß-lactones, prepared by the atmospheric pressure carbonylation reaction of respective epoxides, the boric acid biocatalyzed ring-opening (co)polymerization of δ-valerolactone has been studied. As a co-monomer the 6-methy-ε-caprolactone, prepared by the one-pot oxidation of respective alcohol, and ethylene glycol as polymerization initiator were used. The obtained copolymers were characterized by 1H-NMR, GPC and ESI-MS, respectively in order to confirm their chemical structures and identity. Subsequently, tandem mass spectrometry (MS-MS studies) via collision-induced dissociation were utilized to characterize the fragmentation pattern. ESI-MS and NMR analyses confirmed the formation of random linear copolymer chains composed of different polyester repeat units. MS-MS experiments showed that fragmentation proceeds via ester bound cleavage along the (co)polyester chains. The innovative aspect of this contribution is related to the elaboration of the telechelic (co)polymers end-capped with hydroxyl end groups and well-defined molecular architectures, which could facilitate the development of new flexible macromolecular systems for potential biomedical applications.

Metal-free Catalyst B2 S Sheet for Effective CO2 Electrochemical Reduction to CH3 OH.

Considering the problems of high costs, low catalytic activity and selectivity in the metal-based catalysts for CO2 electroreduction, we apply boron-containing metal-free B2 S sheet as an alternative to the traditional metal-based catalysts. Reaction energy calculations identify the preferred "Formate" pathway for CO2 conversion to CH3 OH on B2 S, in which the thermodynamic energy barrier obtained by using the Computational Hydrogen Electrode model is 0.57 eV, and the kinetic energy barrier obtained by searching the transition states is 1.18 eV. Another possible reaction pathway, "RWGS+CO-hydro", is suppressed and the hydrogen evolution reaction (HER) side reaction is nonspontaneous. Compared to Cu(211) with the highest catalytic activity among all transition metals, B2 S sheet exhibits a better catalytic activity with a lower overpotential for CO2 reduction and a better selectivity that suppresses the non-target reaction.

1,3-Dibromo-5,5-dimethylhydantoin as a Precatalyst for Activation of Carbonyl Functionality.

Keywords: .

A Borocarbonitride Ceramic Aerogel for Photoredox Catalysis.

Borocarbonitride (BCN) is a new type of photocatalyst, but bulk BCN shows a large band gap, and low surface area, and moderate activity for photocatalysis. Here, a three-dimensional (3D) porous ceramic BCN aerogel was developed as an effective photocatalyst for relevant reactions. The unique structures endow the aerogel with an adjustable band gap and a high surface area, excellent stability, and improved crystallinity, which accelerates the separation and transfer of electron-hole pairs and promotes catalytic kinetics, thus enhancing the performance of photocatalytic reactions for hydrogen generation and carbon dioxide reduction. This work supplies a low-cost, convenient and green synthesis method for building ceramic aerogels, and it provides a simple colloid chemistry strategy combined with boron-containing compounds to facilitate further innovative breakthroughs in the novel ceramic aerogel materials design and development in the field of catalysis.

Manganese deception on graphene and implications in catalysis.

Heteroatom-doped metal-free graphene has been widely studied as the catalyst for the oxygen reduction reaction (ORR). Depending on the preparation method and the dopants, the ORR activity varies ranging from a two-electron to a four-electron pathway. The different literature reports are difficult to correlate due to the large variances. However, due to the potential metal contamination, the origin of the ORR activity from "metal-free" graphene remains confusing and inconclusive. Here we decipher the ORR catalytic activities of diverse architectures on graphene derived from reduced graphene oxide. High angle annular dark field scanning transmission electron microscopy, X-ray absorption near edge structure, extended X-ray absorption fine structure, and trace elemental analysis methods are employed. The mechanistic origin of ORR activity is associated with the trace manganese content and reaches its highest performance at an onset potential of 0.94 V when manganese exists as a mononuclear-centered structure within defective graphene. This study exposes the deceptive role of trace metal in formerly thought to be metal-free graphene materials. It also provides insight into the design of better-performing catalyst for ORR by underscoring the coordination chemistry possible for future single-atom catalyst materials.

Esterification of Aryl/Alkyl Acids Catalysed by N-bromosuccinimide under Mild Reaction Conditions.

N-halosuccinimides (NXSs) are well-known to be convenient, easily manipulable and low-priced halogenation reagents in organic synthesis. In the present work, N-bromosuccinimide (NBS) has been promoted as the most efficient and selective catalyst among the NXSs in the reaction of direct esterification of aryl and alkyl carboxylic acids. Comprehensive esterification of substituted benzoic acids, mono-, di- and tri-carboxy alkyl derivatives has been performed under neat reaction conditions. The method is metal-free, air- and moisture-tolerant, allowing for a simple synthetic and isolation procedure as well as the large-scale synthesis of aromatic and alkyl esters with yields up to 100%. Protocol for the recycling of the catalyst has been proposed.

Molecular Level Structure of Biodegradable Poly(Delta-Valerolactone) Obtained in the Presence of Boric Acid.

In this study, low molecular weight poly(δ-valerolactone) (PVL) was synthesized through bulk-ring openings polymerization of δ-valerolactone with boric acid (B(OH)3) as a catalyst and benzyl alcohol (BnOH) as an initiator. The resulting homopolymer was characterized with the aid of nuclear magnetic resonance (NMR) and mass spectrometry (MS) techniques to gain further understanding of its molecular structure. The electrospray ionization mass spectrometry (ESI-MS) spectra of poly(δ-valerolactone) showed the presence of two types of homopolyester chains-one terminated by benzyl ester and hydroxyl end groups and one with carboxyl and hydroxyl end groups. Additionally, a small amount of cyclic PVL oligomers was identified. To confirm the structure of PVL oligomers obtained, fragmentation of sodium adducts of individual polyester molecules terminated by various end groups was explored in ESI-MSn by using collision induced dissociation (CID) techniques. The ESI-MSn analyses were conducted both in positive- and negative ion mode. The comparison of the fragmentation spectra obtained with proposed respective theoretical fragmentation pathways allowed the structure of the obtained oligomers to be established at the molecular level. Additionally, using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS), it was proven that regardless of the degree of oligomerization, the resulting PVL samples were a mixture of two types of linear PVL oligomers differing in end groups and containing just a small amount of cyclic oligomers that tended to be not visible at higher molar masses.