Self-Driven, Monopolar Electrohydrodynamic Printing via Dielectric Nanoparticle Layer.

Electrohydrodynamic printing holds both ultrahigh-resolution fabrication capability and unmatched ink-viscosity compatibility yet fails on highly insulating thick/irregular substrates. Herein, we proposed a single-potential driven electrohydrodynamic printing process with submicrometer resolution on arbitrary nonconductive targets, regardless of their geometric shape or sizes, via precoating with an ultrathin dielectric nanoparticle layer. Benefiting from the favorable Maxwell-Wagner polarization, the reversely polarized spot brought about a significant drop (∼57% for ceramics) in the operation voltage as its induced electric field and a negligible residual charge accumulation. Thus, ordered micro/nanostructures with line widths down to 300 nm were directly written at a stage speed as low as 5 mm/s, and silver features with width of ∼2 µm or interval of ∼4 µm were achieved on insulating substrates separately. Flexible sensors and curved heaters were then high-precision printed and demonstrated successfully, presenting this technique with huge potential for fabricating flexible/conformal electronics on arbitrary 3D structures.

Harnessing Biomimicry for Controlled Adhesion on Material Surfaces.

Nature serves as an abundant wellspring of inspiration for crafting innovative adhesive materials. Extensive research is conducted on various complex forms of biological attachment, such as geckos, tree frogs, octopuses, and mussels. However, significant obstacles still exist in developing adhesive materials that truly replicate the behaviors and functionalities observed in living organisms. Here, an overview of biological organs, structures, and adhesive secretions endowed with adhesion capabilities, delving into the intricate relationship between their morphology and function, and potential for biomimicry are provided. First, the design principles and mechanisms of adhesion behavior and individual organ morphology in nature are summarized from the perspective of structural and size constraints. Subsequently, the value of engineered and bioinspired adhesive materials through selective application cases in practical fields is emphasized. Then, a forward-looking gaze on the conceivable challenges and associated opportunities in harnessing biomimetic strategies and biological materials for advancing adhesive material innovation is highlighted and cast.

Multivalent Sulfur Vacancy-Rich NiCo2S4@MnO2 Urchin-Like Heterostructures for Ambient Electrochemical N2 Reduction to NH3.

Innovative advances in the exploitation of effective electrocatalytic materials for the reduction of nitrogen (N2) to ammonia (NH3) are highly required for the sustainable production of fertilizers and zero-carbon emission fuel. In order to achieve zero-carbon footprints and renewable NH3 production, electrochemical N2 reduction reaction (NRR) provides a favorable energy-saving alternative but it requires more active, efficient, and selective catalysts. In current work, sulfur vacancy (Sv)-rich NiCo2S4@MnO2 heterostructures are efficaciously fabricated via a facile hydrothermal approach followed by heat treatment. The urchin-like Sv-NiCo2S4@MnO2 heterostructures serve as cathodes, which demonstrate an optimal NH3 yield of 57.31 µg h-1 mgcat -1 and Faradaic efficiency of 20.55% at -0.2 V versus reversible hydrogen electrode (RHE) in basic electrolyte owing to the synergistic interactions between Sv-NiCo2S4 and MnO2. Density functional theory (DFT) simulation further verifies that Co-sites of urchin-like Sv-NiCo2S4@MnO2 heterostructures are beneficial to lowering the energy threshold for N2 adsorption and successive protonation. Distinctive micro/nano-architectures exhibit high NRR electrocatalytic activities that might motivate researchers to explore and concentrate on the development of heterostructures for ambient electrocatalytic NH3 generation.

Printing 3D Metallic Structures in Porous Matrix.

The fabrication of metallic micro/nanostructures has great potential for advancing optoelectronic microdevices. Over the past decade, femtosecond laser direct writing (FsLDW) technology has played a crucial role in driving progress in this field. In this study, silica gel glass is used as a supporting medium, and FsLDW is employed to reduce gold and palladium ions using 7-Diethylamino-3-thenoylcoumarin (DETC) as a two-photon sensitizer, enabling the printing of conductive multilayered and 3D metallic structures. How the pore size of the silica gel glass affects the electrical conductivity of printed metal wires is systematically examined. This 3D printing method is versatile and offers expanded opportunities for applying metallic micro/nanostructures in optoelectronic devices.

A Review of Smart Superwetting Surfaces Based on Shape-Memory Micro/Nanostructures.

Bioinspired smart superwetting surfaces with special wettability have aroused great attention from fundamental research to technological applications including self-cleaning, oil-water separation, anti-icing/corrosion/fogging, drag reduction, cell engineering, liquid manipulation, and so on. However, most of the reported smart superwetting surfaces switch their wettability by reversibly changing surface chemistry rather than surface microstructure. Compared with surface chemistry, the regulation of surface microstructure is more difficult and can bring novel functions to the surfaces. As a kind of stimulus-responsive material, shape-memory polymer (SMP) has become an excellent candidate for preparing smart superwetting surfaces owing to its unique shape transformation property. This review systematically summarizes the recent progress of smart superwetting SMP surfaces including fabrication methods, smart superwetting phenomena, and related application fields. The smart superwettabilities, such as superhydrophobicity/superomniphobicity with tunable adhesion, reversible switching between superhydrophobicity and superhydrophilicity, switchable isotropic/anisotropic wetting, slippery surface with tunable wettability, and underwater superaerophobicity/superoleophobicity with tunable adhesion, can be obtained on SMP micro/nanostructures by regulating the surface morphology. Finally, the challenges and future prospects of smart superwetting SMP surfaces are discussed.

Efficient Fabrication of Micro/Nanostructured Polyethylene/Carbon Nanotubes Foam with Robust Superhydrophobicity, Excellent Photothermality, and Sufficient Adaptability for All-Weather Freshwater Harvesting.

The integration of fog collection and solar-driven evaporation has great significance in addressing the challenge of the global freshwater crisis. Herein, a micro/nanostructured polyethylene/carbon nanotubes foam with interconnected open-cell structure (MN-PCG) is fabricated using an industrialized micro extrusion compression molding technology. The 3D surface micro/nanostructure provides sufficient nucleation points for tiny water droplets to harvest moisture from humid air and a fog harvesting efficiency of 1451 mg cm-2 h-1 is achieved at night. The homogeneously dispersed carbon nanotubes and the graphite oxide@carbon nanotubes coating endow the MN-PCG foam with excellent photothermal properties. Benefitting from the excellent photothermal property and sufficient steam escape channels, the MN-PCG foam attains a superior evaporation rate of 2.42 kg m-2 h-1 under 1 Sun illumination. Consequently, a daily yield of ≈35 kg m-2 is realized by the integration of fog collection and solar-driven evaporation. Moreover, the robust superhydrophobicity, acid/alkali tolerance, thermal resistance, and passive/active de-icing properties provide a guarantee for the long-term work of the MN-PCG foam during practical outdoor applications. The large-scale fabrication method for an all-weather freshwater harvester offers an excellent solution to address the global water scarcity.

Metal Oxide Gas Sensors to Study Acetone Detection Considering Their Potential in the Diagnosis of Diabetes: A Review.

Metal oxide (MOx) gas sensors have attracted considerable attention from both scientific and practical standpoints. Due to their promising characteristics for detecting toxic gases and volatile organic compounds (VOCs) compared with conventional techniques, these devices are expected to play a key role in home and public security, environmental monitoring, chemical quality control, and medicine in the near future. VOCs (e.g., acetone) are blood-borne and found in exhaled human breath as a result of certain diseases or metabolic disorders. Their measurement is considered a promising tool for noninvasive medical diagnosis, for example in diabetic patients. The conventional method for the detection of acetone vapors as a potential biomarker is based on spectrometry. However, the development of MOx-type sensors has made them increasingly attractive from a medical point of view. The objectives of this review are to assess the state of the art of the main MOx-type sensors in the detection of acetone vapors to propose future perspectives and directions that should be carried out to implement this type of sensor in the field of medicine.

Cost-Effective Fabrication of Micro-Nanostructured Superhydrophobic Polyethylene/Graphene Foam with Self-Floating, Optical Trapping, Acid-/Alkali Resistance for Efficient Photothermal Deicing and Interfacial Evaporation.

Solar evaporation is one of the most attractive and sustainable approaches to address worldwide freshwater scarcity. Unfortunately, it is still a crucial challenge that needs to be confronted when the solar evaporator faces harsh application environments. Herein, a promising polymer molding method that combines melt blending and compression molding, namely micro extrusion compression molding, is proposed for the cost-effective fabrication of lightweight polyethylene/graphene nanosheets (PE/GNs) foam with interconnected vapor escape channels and surface micro-nanostructures. A contact angle of 155 ± 2°, a rolling angle of 5 ± 1° and reflectance of ≈1.6% in the wavelength range of 300-2500 nm appears on the micro-nanostructured PE/GNs foam surface. More interestingly, the micro-nanostructured PE/GNs foam surface can maintain a robust superhydrophobic state under dynamic impacting, high temperature and acid-/alkali solutions. These results mean that the micro-nanostructured PE/GNs foam surface possesses self-cleaning, anti-icing and photothermal deicing properties at the same time. Importantly, the foam exhibits an evaporation rate of 1.83 kg m-2 h-1 under 1 Sun illumination and excellent salt rejecting performance when it is used as a self-floating solar evaporator. The proposed method provides an ideal and industrialized approach for the mass production of solar evaporators suitable for practical application environments.

Morphological Anisotropy in Metal-Organic Framework Micro/Nanostructures.

Anisotropy plays a unique role in the structural regulation of metal-organic frameworks (MOFs) and their composites, especially at the micro- and nanoscale. However, there is a lack of a understanding of MOF micro/nanoparticles (MNPs) from the perspective of morphological anisotropy. In this Minireview, recent advances in anisotropic MOF MNPs are summarized, with a focus on how morphological anisotropy leads to innovative structures and modulates properties. First, anisotropic pristine MOF MNPs with diverse morphologies are introduced and classified by their morphology-dependent and morphology-independent anisotropy. Secondly, the anisotropy-enabled site-selective higher-order construction of MOF-based materials is highlighted. Finally, challenges and prospects for anisotropic MOFs are discussed, aiming to provide inspiration for further developments in this interesting research field.

Copper Tetracyanoquinodimethane: From Micro/Nanostructures to Applications.

Copper tetracyanoquinodimethane (CuTCNQ) has been investigated around 40 years as a representative bistable material. Meanwhile, micro/nanostructures of CuTCNQ is considered as the prototype of molecular electronics, which have attracted the world's attention and shown great potential applications in nanoelectronics. In this review, methods for synthesis of CuTCNQ micro/nanostructures are first summarized briefly. Then, the strategies for controlling morphologies and sizes of CuTCNQ micro/nanostructures are highlighted. Afterwards, the devices based on these micro/nanostructures are reviewed. Finally, an outlook of future research directions and challenges in this area is presented.

Femtosecond laser trapping nanoprinting of silver micro/nanostructures.

In this paper, silver micro/nanostructures composed of sintered nanoparticles were printed by capturing silver nanoparticles in water with 800 nm femtosecond laser trapping. Relationships of laser power, scanning speed, nanoparticle concentration, and the width and morphology of fabricated silver wire were systematically investigated. It is found that low scanning speed and high nanoparticle concentration favor the printing of silver wire with good morphology. A silver wire with width of 305 nm was printed. Electrical resistivities of printed wires are about 24 times that of bulk silver. Silver grid structures and dot arrays were printed by using this technology. Several three-dimensional silver cuboid structures were also printed. This work provides a protocol for printing of three-dimensional metallic micro/nanostructures using laser trapping. These printed structures have great application prospects in metamaterials, flexible electronics, and SERS.

Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications.

Understanding the relationship between liquid manipulation and micro-/nanostructured interfaces has gained much attention due to the wide potential applications in many fields, such as chemical and biomedical assays, environmental protection, industry, and even daily life. Much work has been done to construct various materials with interfacial liquid manipulation abilities, leading to a range of interesting applications. Herein, different fabrication methods from the top-down approach to the bottom-up approach and subsequent surface modifications of micro-/nanostructured interfaces are first introduced. Then, interactions between the surface and liquid, including liquid wetting, liquid transportation, and a number of corresponding models, together with the definition of hydrophilic/hydrophobic, oleophilic/olephobic, the definition and mechanism of superwetting, including superhydrophobicity, superhydrophilicity, and superoleophobicity, are presented. The micro-/nanostructured interface, with major applications in self-cleaning, antifogging, anti-icing, anticorrosion, drag-reduction, oil-water separation, water collection, droplet (micro)array, and surface-directed liquid transport, is summarized, and the mechanisms underlying each application are discussed. Finally, the remaining challenges and future perspectives in this area are included.

Non-Lithography Hydrodynamic Printing of Micro/Nanostructures on Curved Surfaces.

A key issue of micro/nano devices is how to integrate micro/nanostructures with specified chemical components onto various curved surfaces. Hydrodynamic printing of micro/nanostructures on three-dimensional curved surfaces is achieved with a strategy that combines template-induced hydrodynamic printing and self-assembly of nanoparticles (NPs). Non-lithography flexible wall-shaped templates are replicated with microscale features by dicing a trench-shaped silicon wafer. Arising from the capillary pumped function between the template and curved substrates, NPs in the colloidal suspension self-assemble into close-packed micro/nanostructures without a gravity effect. Theoretical analysis with the lattice Boltzmann model reveals the fundamental principles of the hydrodynamic assembly process. Spiral linear structures achieved by two kinds of fluorescent NPs show non-interfering photoluminescence properties, while the waveguide and photoluminescence are confirmed in 3D curved space. The printed multiconstituent micro/nanostructures with single-NP resolution may serve as a general platform for optoelectronics beyond flat surfaces.

Mechano-Based Transductive Sensing for Wearable Healthcare.

Wearable healthcare presents exciting opportunities for continuous, real-time, and noninvasive monitoring of health status. Even though electrochemical and optical sensing have already made great advances, there is still an urgent demand for alternative signal transformation in terms of miniaturization, wearability, conformability, and stretchability. Mechano-based transductive sensing, referred to the efficient transformation of biosignals into measureable mechanical signals, is claimed to exhibit the aforementioned desirable properties, and ultrasensitivity. In this Concept, a focus on pressure, strain, deflection, and swelling transductive principles based on micro-/nanostructures for wearable healthcare is presented. Special attention is paid to biophysical sensors based on pressure/strain, and biochemical sensors based on microfluidic pressure, microcantilever, and photonic crystals. There are still many challenges to be confronted in terms of sample collection, miniaturization, and wireless data readout. With continuing efforts toward solving those problems, it is anticipated that mechano-based transduction will provide an accessible route for multimode wearable healthcare systems integrated with physical, electrophysiological, and biochemical sensors.

Micro/Nanostructured Materials for Sodium Ion Batteries and Capacitors.

High-efficiency energy storage technologies and devices have received considerable attention due to their ever-increasing demand. Na-related energy storage systems, sodium ion batteries (SIBs) and sodium ion capacitors (SICs), are regarded as promising candidates for large-scale energy storage because of the abundant sources and low cost of sodium. In the last decade, many efforts, including structural and compositional optimization, effective modification of available materials, and design and exploration of new materials, have been made to promote the development of Na-related energy storage systems. In this Review, the latest developments of micro/nanostructured electrode materials for advanced SIBs and SICs, especially the rational design of unique composites with high thermodynamic stabilities and fast kinetics during charge/discharge, are summarized. In addition to the recent achievements, the remaining challenges with respect to fundamental investigations and commercialized applications are discussed in detail. Finally, the prospects of sodium-based energy storage systems are also described.

Ordered Micro/Nanostructures with Geometric Gradient: From Integrated Wettability "Library" to Anisotropic Wetting Surface.

Geometric gradients within ordered micro/nanostructures exhibit unique wetting properties. Well-defined and ordered microsphere arrays with geometric gradient (OMAGG) are successfully fabricated through combining colloidal lithography and inclined reactive ion etching (RIE). During the inclined RIE, the graded etching rates in vertical direction of etcher chamber are the key to generating a geometric gradient. The OMAGG can be used as an effective mask for the preparation of micro/nanostructure arrays with geometric gradient by selective RIE. Through this strategy, a well-defined wettability "library" with graded silicon cone arrays is fabricated, and the possibility of screening one desired "book" from the designated wettability "library" is demonstrated. Meanwhile, the silicon cone arrays with geometric gradient (SCAGG) can be applied to control the wetting behavior of water after being modified by hydrophilic or hydrophobic chemical groups. Based on this result, a temperature-responsive wetting substrate is fabricated by modifying poly n-isopropyl acrylamide (PNIPAM) on the SCAGG. These wettability gradients have great potential in tissue engineering, microfluidic devices, and integrated sensors.

Progression in the Fountain Pen Approach: From 2D Writing to 3D Free-Form Micro/Nanofabrication.

The fountain pen approach, as a means for transferring materials to substrates, has shown numerous incarnations in recent years for creating 2D micro/nanopatterns and even generating 3D free-form nanostructures using a variety of material "inks". While the idea of filled reservoirs used to deliver material to a substrate via a capillary remains unchanged since antiquity, the advent of precise micromanipulation systems and functional material "inks" allows the extension of this mechanism to more high-tech applications. Herein, the recent growth in meniscus guided fountain pen approaches for benchtop micro/nanofabrication, which has occurred in the last decade, is discussed. Particular attention is given to the theory, equipment, and experimentation encompassing this unique direct writing approach. A detailed exploration of the diverse ink systems and functional device applications borne from this strategy is put forth to reveal its rapid expansion to a broad range of scientific and engineering disciplines. As such, this informative review is provided for researchers considering adoption of this recent advancement of a familiar technology.

Hierarchical Porous Intercalation-Type V2 O3 as High-Performance Anode Materials for Li-Ion Batteries.

As intercalation-type anode materials for Li-ion batteries (LIBs), the commercially used graphite and Li4 Ti5 O12 exhibit good cycling and rate properties, but their theoretical specific capacities are too low to meet the ever-growing demands of high-energy applications such as electric vehicles. Therefore, the development of new intercalation-type anode materials with larger capacity is very desirable. Herein, we design and synthesize novel 3 D hierarchical porous V2 O3 @C micro/nanostructures consisting of crumpled nanosheets, through self-reduction under annealing from the structurally similar VO2 (B)@C precursors without the addition of any other reducing reagent or gas. Excitingly, it is found for the first time through ex situ XRD technology that V2 O3 is a new, promising intercalation-type anode material for LIBs with a high capacity. V2 O3 @C micro/nanostructures can deliver a large capacity of 732 mAh g-1 without capacity loss at 100 mA g-1 even after 136 cycles, as well as exhibiting excellent cycling and rate performances. The application of V2 O3 for Na-ion batteries (NIBs) is elaborated for the first time, and excitingly, it is found that V2 O3 @C micro/nanostructures may be promising anode materials for NIBs.

Experimental research on laser interference micro/nano fabrication of hydrophobic modification of stent surface.

Coronary artery disease (CAD) has become one of the important causes of human death, and coronary stent implantation is one of the most effective methods for the treatment of CAD. But the current clinical treatment has a high long-term restenosis rate and is easy to form late stent thrombosis. In order to solve these problems, coronary artery stent surface was directly modified by laser interference lithography and the highly ordered concave structures were fabricated. The morphology and contact angle (CA) of the microstructure were measured with scanning electron microscopy (SEM) and CA system. The water repellent property of the stent was also evaluated by the method of contacting the water drop with the stent and then separating. The result showed that the close-packed concave structure with the period of about 12.194 µm can be fabricated on the stent surface under special parameters (laser energy density of 3.5 J/cm-2, incident angles of 3°, exposure time of 80 s) by the three-beam laser interference of 1064 nm and the form structure has good water repellency with contact angle of 120°.

Enhanced Upconversion Luminescence of Metal-Capped NaGd0.3 Yb0.7 F4:Er Submicrometer Particles.

Metallic nanostructures are often used to enhance photoluminescence of nanomaterials based on local field enhancement with plasmons at metal surfaces. Here upconversion luminescence (UCL) enhancement of submicrometer-size NaGd0.3 Yb0.7 F4 :Er particles in cap-like metal cavities, formed by deposition of a silver film on the particles dispersed on glass substrates, is studied. UCL of the particles is shown to be influenced by not only the plasmon-enhanced local field but also the cavity modes. By varying the cavity size and location of the particles in the cavities, fluctuant variations of the UCL enhancement and electronic depopulation rate are observed in experiments. Typically, a maximum of 12-fold enhancement of the UCL intensity is obtained. Combining the results with numerical simulations, the phenomenon is ascribed to effects of metal quenching, plasmonic field enhancement, and the cavity modes for the excitation and emission photons. Finally it is verified that, for the cap-like submicrometer metal cavities, allocating the particles at the open mouths of the cavities is more advantageous to obtaining stronger enhancements of the particles' UCL. And the demonstrated structure is also convenient to fabricate for applications, e.g., in solar cells.