Predicting concrete strength early age using a combination of machine learning and electromechanical impedance with nano-enhanced sensors.

To ensure the structural integrity of concrete and prevent unanticipated fracturing, real-time monitoring of early-age concrete's strength development is essential, mainly through advanced techniques such as nano-enhanced sensors. The piezoelectric-based electro-mechanical impedance (EMI) method with nano-enhanced sensors is emerging as a practical solution for such monitoring requirements. This study presents a strength estimation method based on Non-Destructive Testing (NDT) Techniques and Long Short-Term Memory (LSTM) and artificial neural networks (ANNs) as hybrid (NDT-LSTMs-ANN), including several types of concrete strength-related agents. Input data includes water-to-cement rate, temperature, curing time, and maturity based on interior temperature, allowing experimentally monitoring the development of concrete strength from the early steps of hydration and casting to the last stages of hardening 28 days after the casting. The study investigated the impact of various factors on concrete strength development, utilizing a cutting-edge approach that combines traditional models with nano-enhanced piezoelectric sensors and NDT-LSTMs-ANN enhanced with nanotechnology. The results demonstrate that the hybrid provides highly accurate concrete strength estimation for construction safety and efficiency. Adopting the piezoelectric-based EMI technique with these advanced sensors offers a viable and effective monitoring solution, presenting a significant leap forward for the construction industry's structural health monitoring practices.

Development of Multimodal Fusion Technology for Tomato Maturity Assessment.

The maturity of fruits and vegetables such as tomatoes significantly impacts indicators of their quality, such as taste, nutritional value, and shelf life, making maturity determination vital in agricultural production and the food processing industry. Tomatoes mature from the inside out, leading to an uneven ripening process inside and outside, and these situations make it very challenging to judge their maturity with the help of a single modality. In this paper, we propose a deep learning-assisted multimodal data fusion technique combining color imaging, spectroscopy, and haptic sensing for the maturity assessment of tomatoes. The method uses feature fusion to integrate feature information from images, near-infrared spectra, and haptic modalities into a unified feature set and then classifies the maturity of tomatoes through deep learning. Each modality independently extracts features, capturing the tomatoes' exterior color from color images, internal and surface spectral features linked to chemical compositions in the visible and near-infrared spectra (350 nm to 1100 nm), and physical firmness using haptic sensing. By combining preprocessed and extracted features from multiple modalities, data fusion creates a comprehensive representation of information from all three modalities using an eigenvector in an eigenspace suitable for tomato maturity assessment. Then, a fully connected neural network is constructed to process these fused data. This neural network model achieves 99.4% accuracy in tomato maturity classification, surpassing single-modal methods (color imaging: 94.2%; spectroscopy: 87.8%; haptics: 87.2%). For internal and external maturity unevenness, the classification accuracy reaches 94.4%, demonstrating effective results. A comparative analysis of performance between multimodal fusion and single-modal methods validates the stability and applicability of the multimodal fusion technique. These findings demonstrate the key benefits of multimodal fusion in terms of improving the accuracy of tomato ripening classification and provide a strong theoretical and practical basis for applying multimodal fusion technology to classify the quality and maturity of other fruits and vegetables. Utilizing deep learning (a fully connected neural network) for processing multimodal data provides a new and efficient non-destructive approach for the massive classification of agricultural and food products.

Eddy Current Sensor Probe Design for Subsurface Defect Detection in Additive Manufacturing.

Pore and crack formation in parts produced by additive manufacturing (AM) processes, such as laser powder bed fusion, is one of the issues associated with AM technology. Surface and subsurface cracks and pores are induced during the printing process, undermining the printed part durability. In-situ detection of defects will enable the real-time or intermittent control of the process, resulting in higher product quality. In this paper, a new eddy current-based probe design is proposed to detect these defects in parts with various defects that mimic pores and cracks in additively manufactured parts. Electromagnetic finite element analyses were carried out to optimize the probe geometry, followed by fabricating a prototype. Artificial defects were seeded in stainless steel plates to assess the feasibility of detecting various flaws with different widths and lengths. The smallest defect detected had a 0.17 mm radius for blind holes and a 0.43 mm notch with a 5 mm length. All the defects were 0.5 mm from the surface, and the probe was placed on the back surface of the defects. The surface roughness of the tested samples was less than 2 µm. The results show promise for detecting defects, indicating a potential application in AM.

Piezoceramics Actuator with Attached Mass for Active Vibration Diagnostics of Reinforced Concrete Structures.

One of the effective methods of non-destructive testing of structures is active vibration diagnostics. This approach consists of the local dynamic impact of the actuator on the structure and the registration of the vibration response. Testing of massive reinforced concrete structures is carried out with the use of actuators, which are able to create sufficiently high-impact loads. The actuators, which are based on piezoelectric elements, cannot provide a sufficient level of force and the areas where it is possible to register the vibrations excited by such actuators are quite small. In this paper, we propose a variant of a piezoactuator with attached mass, which ensures an increase in the level of dynamic impact on the structure. The effectiveness of this version is verified by numerical modeling of the dynamic interaction of the actuator with a concrete slab. The simulation was carried out within the framework of the theory of elasticity and coupled electroelasticity. An algorithm for selecting the value of the attached mass is described. It is shown that when vibrations are excited in a massive concrete slab, an actuator with an attached mass of 1.3 kg provides a 10,000-fold increase in the force compared to an actuator without attached mass. In the pulse mode, a 100-fold increase in force is achieved.

Application of Object Detection Algorithms in Non-Destructive Testing of Pressure Equipment: A Review.

Non-destructive testing (NDT) techniques play a crucial role in industrial production, aerospace, healthcare, and the inspection of special equipment, serving as an indispensable part of assessing the safety condition of pressure equipment. Among these, the analysis of NDT data stands as a critical link in evaluating equipment safety. In recent years, object detection techniques have gradually been applied to the analysis of NDT data in pressure equipment inspection, yielding significant results. This paper comprehensively reviews the current applications and development trends of object detection algorithms in NDT technology for pressure-bearing equipment, focusing on algorithm selection, data augmentation, and intelligent defect recognition based on object detection algorithms. Additionally, it explores open research challenges of integrating GAN-based data augmentation and unsupervised learning to further enhance the intelligent application and performance of object detection technology in NDT for pressure-bearing equipment while discussing techniques and methods to improve the interpretability of deep learning models. Finally, by summarizing current research and offering insights for future directions, this paper aims to provide researchers and engineers with a comprehensive perspective to advance the application and development of object detection technology in NDT for pressure-bearing equipment.

Crack Detection Method for Wind Turbine Tower Bolts Using Ultrasonic Spiral Phased Array.

High-strength bolts are crucial load-bearing components of wind turbine towers. They are highly susceptible to fatigue cracks over long-term service and require timely detection. However, due to the structural complexity and hidden nature of the cracks in wind turbine tower bolts, the small size of the cracks, and their variable propagation directions, detection signals carrying crack information are often drowned out by dense thread signals. Existing non-destructive testing methods are unable to quickly and accurately characterize small cracks at the thread roots. Therefore, we propose an ultrasonic phased array element arrangement method based on the Fermat spiral array. This method can greatly increase the fill rate of the phased array with small element spacing while reducing the effects of grating and sidelobes, thereby achieving high-energy excitation and accurate imaging with the ultrasonic phased array. This has significant theoretical and engineering application value for ensuring the safe and reliable service of key wind turbine components and for promoting the technological development of the wind power industry.

Innovative Non-Invasive and Non-Intrusive Precision Thermometry in Stainless-Steel Tanks Using Ultrasound Transducers.

Measuring temperature inside chemical reactors is crucial to ensuring process control and safety. However, conventional methods face a number of limitations, such as the invasiveness and the restricted dynamic range. This paper presents a novel approach using ultrasound transducers to enable accurate temperature measurements. Our experiments, conducted within a temperature range of 28.8 to 83.8 °C, reveal a minimal temperature accuracy of 98.6% within the critical zone spanning between 70.5 and 75 °C, and an accuracy of over 99% outside this critical zone. The experiments focused on a homogeneous environment of distilled water within a stainless-steel tank. This approach will be extended in a future research in order to diversify the experimental media and non-uniform environments, while promising broader applications in chemical process monitoring and control.

Non-Destructive Testing of a Fiber-Web-Reinforced Polymethacrylimide Foam Sandwich Panel with Terahertz Time-Domain Spectroscopy.

Terahertz (THz) non-destructive testing can detect internal defects in dielectric materials. However, this technology is mainly used for detecting thin and simple structures at present, lacking validations for the detection effectiveness of internal defects in thicker and more complex structures, such as fiber-web-reinforced composite sandwich panels. In this study, samples of fiber-web-reinforced polymethacrylimide foam sandwich panels, which are, respectively, 20 mm and 30 mm thick, were made to detect the internal debonding, inclusion, pore, and crack defects by the THz time-domain spectroscopy system (THz-TDS). The peak-to-peak-imaging algorithm, maximum-amplitude-imaging algorithm, minimum-amplitude-imaging algorithm, pulse-width-imaging algorithm, and time-of-flight-imaging algorithm were used to process and image the collected THz signals. The results showed that the peak-to-peak-imaging algorithm had the best performance. To address the low imaging resolution of THz-TDS, a block-based super-resolution reconstruction method-SSSRGAN-is proposed, which can improve image resolution while maintaining the clear edge contours of defects. The defect-detection results of the samples showed that THz-TDS could detect all pore, debonding, and crack defects, with a minimum size of 3 mm for pores and debonding and a minimum thickness of 1 mm for cracks. The method showed poor detection performance for inclusions with a thickness of 0.053 mm, but could still extract the defect features. Based on the THz-TDS reflection mode measurement principle, the thickness information of the panel, foam core, and web of the samples was calculated: the measurement error was no more than 0.870 mm for Sample #1 and no more than 0.270 mm for Sample #2, demonstrating the accuracy of THz-TDS in measuring the dimensions of sandwich panel structures. In general, THz technology shows potential for detecting internal defects and performing dimensional measurements in complex structures. With the advancement of portable devices and enhancements in detection speed, real-time on-site detection is anticipated in the future.

Identification of Beef Odors under Different Storage Day and Processing Temperature Conditions Using an Odor Sensing System.

This study used an odor sensing system with a 16-channel electrochemical sensor array to measure beef odors, aiming to distinguish odors under different storage days and processing temperatures for quality monitoring. Six storage days ranged from purchase (D0) to eight days (D8), with three temperature conditions: no heat (RT), boiling (100 °C), and frying (180 °C). Gas chromatography-mass spectrometry (GC-MS) analysis showed that odorants in the beef varied under different conditions. Compounds like acetoin and 1-hexanol changed significantly with the storage days, while pyrazines and furans were more detectable at higher temperatures. The odor sensing system data were visualized using principal component analysis (PCA) and uniform manifold approximation and projection (UMAP). PCA and unsupervised UMAP clustered beef odors by storage days but struggled with the processing temperatures. Supervised UMAP accurately clustered different temperatures and dates. Machine learning analysis using six classifiers, including support vector machine, achieved 57% accuracy for PCA-reduced data, while unsupervised UMAP reached 49.1% accuracy. Supervised UMAP significantly enhanced the classification accuracy, achieving over 99.5% with the dimensionality reduced to three or above. Results suggest that the odor sensing system can sufficiently enhance non-destructive beef quality and safety monitoring. This research advances electronic nose applications and explores data downscaling techniques, providing valuable insights for future studies.

Novel Water Probe for High-Frequency Focused Transducer Applied to Scanning Acoustic Microscopy System: Simulation and Experimental Investigation.

A scanning acoustic microscopy (SAM) system is a common non-destructive instrument which is used to evaluate the material quality in scientific and industrial applications. Technically, the tested sample is immersed in water during the scanning process. Therefore, a robot arm is incorporated into the SAM system to transfer the sample for in-line inspection, which makes the system complex and increases time consumption. The main aim of this study is to develop a novel water probe for the SAM system, that is, a waterstream. During the scanning process, water was supplied using a waterstream instead of immersing the sample in the water, which leads to a simple design of an automotive SAM system and a reduction in time consumption. In addition, using a waterstream in the SAM system can avoid contamination of the sample due to immersion in water for long-time scanning. Waterstream was designed based on the measured focal length calculation of the transducer and simulated to investigate the internal flow characteristics. To validate the simulation results, the waterstream was prototyped and applied to the TSAM-400 and W-FSAM traditional and fast SAM systems to successfully image some samples such as carbon fiber-reinforced polymers, a printed circuit board, and a 6-inch wafer. These results demonstrate the design method of the water probe applied to the SAM system.

A Dual-Mode Surface Acoustic Wave Delay Line for the Detection of Ice on 64°-Rotated Y-Cut Lithium Niobate.

Ice accumulation on infrastructure poses severe safety risks and economic losses, necessitating effective detection and monitoring solutions. This study introduces a novel approach employing surface acoustic wave (SAW) sensors, known for their small size, wireless operation, energy self-sufficiency, and retrofit capability. Utilizing a SAW dual-mode delay line device on a 64°-rotated Y-cut lithium niobate substrate, we demonstrate a solution for combined ice detection and temperature measurement. In addition to the shear-horizontal polarized leaky SAW, our findings reveal an electrically excitable Rayleigh-type wave in the X+90° direction on the same cut. Experimental results in a temperature chamber confirm capability for reliable differentiation between liquid water and ice loading and simultaneous temperature measurements. This research presents a promising advancement in addressing safety concerns and economic losses associated with ice accretion.

Coherent Off-Axis Terahertz Tomography with a Multi-Channel Array and f-theta Optics.

Terahertz tomography is a promising method among non-destructive inspection techniques to detect faults and defects in dielectric samples. Recently, image quality was improved significantly through the incorporation of a priori information and off-axis data. However, this improvement has come at the cost of increased measurement time. To aim toward industrial applications, it is therefore necessary to speed up the measurement by parallelizing the data acquisition employing multi-channel setups. In this work, we present two tomographic frequency-modulated continuous wave (FMCW) systems working at a bandwidth of 230-320 GHz, equipped with an eight-channel detector array, and we compare their imaging results with those of a single-pixel setup. While in the first system the additional channels are used exclusively to detect radiation refracted by the sample, the second system features an f-θ lens, focusing the beam at different positions on its flat focal plane, and thus utilizing the whole detector array directly. The usage of the f-θ lens in combination with a scanning mirror eliminates the necessity of the formerly used slow translation of a single-pixel transmitter. This opens up the potential for a significant increase in acquisition speed, in our case by a factor of four to five, respectively.

Phased Array Ultrasonic Method for Robotic Preload Measurement in Offshore Wind Turbine Bolted Connections.

This paper presents a novel approach for preload measurement of bolted connections, specifically tailored for offshore wind applications. The proposed method combines robotics, Phased Array Ultrasonic Testing (PAUT), nonlinear acoustoelasticity, and Finite Element Analysis (FEA). Acceptable defects, below a pre-defined size, are shown to have an impact on preload measurement, and therefore conducting simultaneous defect detection and preload measurement is discussed in this paper. The study demonstrates that even slight changes in the orientation of the ultrasonic transducer, the non-automated approach, can introduce a significant error of up to 140 MPa in bolt stress measurement and therefore a robotic approach is employed to achieve consistent and accurate measurements. Additionally, the study emphasises the significance of considering average preload for comparison with ultrasonic data, which is achieved through FEA simulations. The advantages of the proposed robotic PAUT method over single-element approaches are discussed, including the incorporation of nonlinearity, simultaneous defect detection and stress measurement, hardware and software adaptability, and notably, a substantial improvement in measurement accuracy. Based on the findings, the paper strongly recommends the adoption of the robotic PAUT approach for preload measurement, whilst acknowledging the required investment in hardware, software, and skilled personnel.

PMUT-Based System for Continuous Monitoring of Bolted Joints Preload.

In this paper, we present a bolt preload monitoring system, including the system architecture and algorithms. We show how Finite Element Method (FEM) simulations aided the design and how we processed signals to achieve experimental validation. The preload is measured using a Piezoelectric Micromachined Ultrasonic Transducer (PMUT) in pulse-echo mode, by detecting the Change in Time-of-Flight (CTOF) of the acoustic wave generated by the PMUT, between no-load and load conditions. We performed FEM simulations to analyze the wave propagation inside the bolt and understand the effect of different configurations and parameters, such as transducer bandwidth, transducer position (head/tip), presence or absence of threads, as well as the frequency of the acoustic waves. In order to couple the PMUT to the bolt, a novel assembly process involving the deposition of an elastomeric acoustic impedance matching layer was developed. We achieved, for the first time with PMUTs, an experimental measure of bolt preload from the CTOF, with a good signal-to-noise ratio. Due to its low cost and small size, this system has great potential for use in the field for continuous monitoring throughout the operative life of the bolt.

Falling weight deflectometer dispersion curve method for pavement modulus calculation.

The falling weight deflectometer (FWD) test is a common non-destructive testing method for evaluating the structural capacity of pavements. At present, data processing of the FWD test mainly focuses on the deflection data, while paying less attention to the deflection-time history. Because a FWD is equipped with impulse loads and geophones, which allow for the generation and capture of surface wave signal propagation, it is hypothesized that Rayleigh wave dispersion theory can be applied to calculate the modulus profile along the pavement depth by analysing the dispersive properties of the deflection signal measured during FWD tests. To test this hypothesis, we develop a new methodology for the FWD test and data analysis, referred to as the FWD dispersion curve method. We first introduce the concept of the new method, followed by an illustration of the procedure and the experimental set-up. Case studies on three concrete pavement segments are then presented to evaluate the effectiveness of the FWD dispersion curve method. Modifications to the existing FWD device are further recommended for the impact loading sources and signal collection process so that the modulus of a much shallower layer, such as the concrete slab and upper asphalt layers, can be obtained. This article is part of the theme issue 'Artificial intelligence in failure analysis of transportation infrastructure and materials'.

Automated Identification of Hidden Corrosion Based on the D-Sight Technique: A Case Study on a Military Helicopter.

Hidden corrosion remains a significant problem during aircraft service, primarily because of difficulties in its detection and assessment. The non-destructive D-Sight testing technique is characterized by high sensitivity to this type of damage and is an effective sensing tool for qualitative assessments of hidden corrosion in aircraft structures used by numerous ground service entities. In this paper, the authors demonstrated a new approach to the automatic quantification of hidden corrosion based on image processing D-Sight images during periodic inspections. The performance of the developed processing algorithm was demonstrated based on the results of the inspection of a Mi family military helicopter. The nondimensional quantitative measurement introduced in this study confirmed the effectiveness of this evaluation of corrosion progression, which was in agreement with the results of qualitative analysis of D-Sight images made by inspectors. This allows for the automation of the inspection process and supports inspectors in evaluating the extent and progression of hidden corrosion.

Printed Eddy Current Testing Sensors: Toward Structural Health Monitoring Applications.

Reliable measurements in structural health monitoring mean for the instrumentation to be set in perfect reproducible conditions. The solution described in this study consists of printing the sensors directly on the parts to be controlled. This method solves the reproducibility issue, limits human error, and can be used in confined or hazardous environments. This work was limited to eddy current testing, but the settings and conclusions are transposable to any non-destructive testing methods (ultrasounds, etc.). The first salve of tests was run to establish the best dielectric and conductive ink combination. The Dupont ink combination gave the best performances. Then, the dispenser- and the screen-printing methods were carried out to print flat spiral coils on flexible substrates. The resulting sensors were compared to flex-printed circuit boards (PCB-flex) using copper for the electrical circuit. The conductive ink methods were revealed to be just as efficient. The last stage of this work consisted of printing sensors on solid parts. For this, 20-turn spiral coils were printed on 3 mm thick stainless-steel plates. The permanent sensors showed good sensibility in the same range as the portative ones, demonstrating the method's feasibility.

Photoacoustic Spectroscopy Combined with Integrated Learning to Identify Soybean Oil with Different Frying Durations.

Soybean oil produces harmful substances after long durations of frying. A rapid and nondestructive identification approach for soybean oil was proposed based on photoacoustic spectroscopy and stacking integrated learning. Firstly, a self-designed photoacoustic spectrometer was built for spectral data collection of soybean oil with various frying times. At the same time, the actual free fatty acid content and acid value in soybean oil were measured by the traditional titration experiment, which were the basis for soybean oil quality detection. Next, to eliminate the influence of noise, the spectrum from 1150 cm-1 to 3450 cm-1 was selected to remove noise by ensemble empirical mode decomposition. Then three dimensionality reduction methods of principal component analysis, successive projection algorithm, and competitive adaptive reweighting algorithm were used to reduce the dimension of spectral information to extract the characteristic wavelength. Finally, an integrated model with three weak classifications was used for soybean oil detection by stacking integrated learning. The results showed that three obvious absorption peaks existed at 1747 cm-1, 2858 cm-1, and 2927 cm-1 for soluble sugars and unsaturated oils, and the model based on stacking integrated learning could improve the classification accuracy from 0.9499 to 0.9846. The results prove that photoacoustic spectroscopy has a good detection ability for edible oil quality detection.

Acoustic-Signal-Based Damage Detection of Wind Turbine Blades-A Review.

Monitoring and maintaining the health of wind turbine blades has long been one of the challenges facing the global wind energy industry. Detecting damage to a wind turbine blade is important for planning blade repair, avoiding aggravated blade damage, and extending the sustainability of blade operation. This paper firstly introduces the existing wind turbine blade detection methods and reviews the research progress and trends of monitoring of wind turbine composite blades based on acoustic signals. Compared with other blade damage detection technologies, acoustic emission (AE) signal detection technology has the advantage of time lead. It presents the potential to detect leaf damage by detecting the presence of cracks and growth failures and can also be used to determine the location of leaf damage sources. The detection technology based on the blade aerodynamic noise signal has the potential of blade damage detection, as well as the advantages of convenient sensor installation and real-time and remote signal acquisition. Therefore, this paper focuses on the review and analysis of wind power blade structural integrity detection and damage source location technology based on acoustic signals, as well as the automatic detection and classification method of wind power blade failure mechanisms combined with machine learning algorithm. In addition to providing a reference for understanding wind power health detection methods based on AE signals and aerodynamic noise signals, this paper also points out the development trend and prospects of blade damage detection technology. It has important reference value for the practical application of non-destructive, remote, and real-time monitoring of wind power blades.

Microwave NDT of Smart Composite Structures with Embedded Antennas.

The integration of antennas in composite structures is gaining popularity with advances in wireless communications and the ever-increasing demands for efficient smart structures. Efforts are ongoing to ensure that antenna-embedded composite structures are robust and resilient to inevitable impacts, loading and other external factors that threaten the structural integrity of these structures. Undoubtedly, the in situ inspection of such structures to identify anomalies and predict failures is required. In this paper, the microwave non-destructive testing (NDT) of antenna-embedded composite structures is introduced for the first time. The objective is accomplished using a planar resonator probe operating in the UHF frequency range (~525 MHz). High-resolution images of a C-band patch antenna fabricated on an aramid paper-based honeycomb substrate and covered with a glass fiber reinforced polymer (GFRP) sheet are presented. The imaging prowess of microwave NDT and its distinct advantages in inspecting such structures are highlighted. The qualitative as well as the quantitative evaluation of the images produced by the planar resonator probe and a conventional K-band rectangular aperture probe are included. Overall, the potential utility of microwave NDT for the inspection of smart structures is demonstrated.