Freestanding Penta-Twinned Palladium Nanosheets.

Control over the morphology of nanomaterials to have a 2D structure and manipulating the surface strain of nanostructures through defect control have proved to be promising for developing efficient catalysts for sustainable chemical and energy conversion. Here a one-pot aqueous synthesis route of freestanding Pd nanosheets with a penta-twinned structure (PdPT NSs) is presented. The generation of the penta-twinned nanosheet structure can be succeeded by directing the anisotropic growth of Pd under the controlled reduction kinetics of Pd precursors. Experimental and computational investigations showed that the surface atoms of the PdPT NSs are effectively under a compressive environment due to the strain imposed by their twin boundary defects. Due to the twin boundary-induced surface strain as well as the 2D structure of the PdPT NSs, they exhibited highly enhanced electrocatalytic activity for oxygen reduction reaction compared to Pd nanosheets without a twin boundary, 3D Pd nanocrystals, and commercial Pd/C and Pt/C catalysts.

Synthesis of Substituted 1,2-Dihydroisoquinolines by Palladium-Catalyzed Cascade Cyclization-Coupling of Trisubstituted Allenamides with Arylboronic Acids.

1,2-Dihydroisoquinolines are important compounds due to their biological and medicinal activities, and numerous approaches to their synthesis have been reported. Recently, we reported a facile synthesis of trisubstituted allenamides via N-acetylation followed by DBU-promoted isomerization, where various substituted allenamides were conveniently synthesized from readily available propargylamines with high efficiency. In light of this research background, we focused on the utility of this methodology for the synthesis of substituted 1,2-dihydroisoquinolines. In this study, a palladium-catalyzed cascade cyclization-coupling of trisubstituted allenamides containing a bromoaryl moiety with arylboronic acids is described. When N-acetyl diphenyl-substituted trisubstituted allenamide and phenylboronic acid were treated with 10 mol% of Pd(OAc)2, 20 mol% of P(o-tolyl)3, and 5 equivalents of NaOH in dioxane/H2O (4/1) at 80 °C, the reaction proceeded to afford a substituted 1,2-dihydroisoquinoline. The reaction proceeded via intramolecular cyclization, followed by transmetallation with the arylboronic acid of the resulting allylpalladium intermediate. A variety of highly substituted 1,2-dihydroisoquinolines were concisely obtained using this methodology because the allenamides, as reaction substrates, were prepared from readily available propargylamines in one step.

In Situ Synthesis of Encapsulated Pd@silicalite-2 for Highly Stable Methane Catalytic Combustion.

Methane emissions from vehicles have made a significant contribution to the greenhouse effect, primarily due to its high global warming potential. Supported noble metal catalysts are widely employed in catalytic combustion of methane in vehicles, but they still face challenges such as inadequate low-temperature activity and deactivation due to sintering under harsh operating conditions. In the present work, a series of encapsulated structured catalysts with palladium nanoparticles confined in hydrophobic silicalite-2 were prepared by an in situ synthesis method. Based on various characterization methods, including XRD, HR-TEM, XPS, H2-TPR, O2-TPD, H2O-TPD, CH4-TPR, Raman, and in situ DRIFTS-MS, it was confirmed that PdOx nanoparticles were mainly encapsulated inside the silicalite-2 zeolite, which further maintained the stability of the nanoparticles under harsh conditions. Specifically, the 3Pd@S-2 sample exhibited high catalytic activity for methane oxidation even after harsh hydrothermal aging at 750 °C for 16 h and maintained long-term stability at 400 °C for 130 h during wet methane combustion. In situ Raman spectroscopy has confirmed that PdOx species act as active species for methane oxidation. During this reaction, methane reacts with PdOx to produce CO2 and H2O, while simultaneously reducing PdOx to metallic Pd species, which is further reoxidized by oxygen to replenish the PdOx catalyst.

High Selectivity Hydrogen Gas Sensor Based on WO3/Pd-AlGaN/GaN HEMTs.

We investigated the hydrogen gas sensors based on AlGaN/GaN high electron mobility transistors (HEMTs) for high temperature sensing operation. The gate area of the sensor was functionalized using a 10 nm Pd catalyst layer for hydrogen gas sensing. A thin WO3 layer was deposited on top of the Pd layer to enhance the sensor selectivity toward hydrogen gas. At 200 °C, the sensor exhibited high sensitivity of 658% toward 4%-H2, while exhibiting only a little interaction with NO2, CH4, CO2, NH3, and H2S. From 150 °C to 250 °C, the 10 ppm hydrogen response of the sensor was at least eight times larger than other target gases. These results showed that this sensor is suitable for H2 detection in a complex gas environment at a high temperature.

Pd/silicalite-1: An highly active catalyst for the oxidative removal of toluene.

Catalytic combustion is thought as an efficient and economic pathway to remove volatile organic compounds, and its critical issue is the development of high-performance catalytic materials. In this work, we used the in situ synthesis method to prepare the silicalite-1 (S-1)-supported Pd nanoparticles (NPs). It is found that the as-prepared catalysts displayed a hexagonal prism morphology and a surface area of 390-440 m2/g. The sample (0.28Pd/S-1-H) derived after reduction at 500°C in 10 vol% H2 showed the best catalytic activity for toluene combustion (T50% = 180°C and T90% = 189°C at a space velocity of 40,000 mL/(g·hr), turnover frequency (TOFPd) at 160°C = 3.46 × 10-3 sec-1, and specific reaction rate at 160°C = 63.8 µmol/(gPd·sec)), with the apparent activation energy (41 kJ/mol) obtained over the best-performing 0.28Pd/S-1-H sample being much lower than those (51-70 kJ/mol) obtained over the other samples (0.28Pd/S-1-A derived from calcination at 500°C in air, 0.26Pd/S-1-im derived from the impregnation route, and 0.27Pd/ZSM-5-H prepared after reduction at 500°C in 10 vol% H2). Furthermore, the 0.28Pd/S-1-H sample possessed good thermal stability and its partial deactivation due to CO2 or H2O introduction was reversible, but SO2 addition resulted in an irreversible deactivation. The possible pathways of toluene oxidation over 0.28Pd/S-1-H was toluene â†’ p-methylbenzoquinone â†’ maleic anhydride, benzoic acid, benzaldehyde â†’ carbon dioxide and water. We conclude that the good dispersion of Pd NPs, high adsorption oxygen species concentration, large toluene adsorption capacity, strong acidity, and more Pd0 species were responsible for the good catalytic performance of 0.28Pd/S-1-H.

Palladium-Catalyzed Carbonylative Four-Component Synthesis of ß-Perfluoroalkyl Amides.

Transition-metal-catalyzed multicomponent carbonylation is one of the most efficient strategies to construct carbonyl-containing compounds. Herein, a palladium-catalyzed four-component perfluoroalkylation/aminocarbonylation of unactivated alkenes with perfluoroalkyl halides, and amines was developed. A wide range of substrates, including anilines, alkylamines, sulfonamides, and hydrazines are all suitable reaction partners for this catalyst system, resulting in various ß-perfluoroalkyl amides with good functional-group tolerance and excellent chemoselectivity. Furthermore, not only alkyl olefins, but also aliphatic alkynes, and even alkyl allenes can all be employed. Notably, several medical and bioactive related molecules are compatible here as well.

Development of Dipolarophiles for Catalytic Asymmetric Cycloadditions through Pd-π-Allyl Zwitterions.

The development of new and efficient methodology for the construction of optically active molecules is of great interest in both synthetic organic and medicinal chemistry fields. To this end, the personal account summarizes our studies on the development of electron-deficient alkenes, allenes, and alkynes containing single activator as new dipolarophiles for Pd-catalyzed asymmetric cycloaddition reactions. These new dipolarophiles can participate in Pd-catalyzed asymmetric [3+2] and [4+2] cycloadditions through Pd-π-allyl 1,3- and 1,4-zwitterions in-situ generated by the reaction of Pd(0) catalyst with vinyl aziridines, vinyl epoxides, vinyl cyclopropanes, 4-vinyl-1,3-dioxan-2-ones, and vinyl benzoxazinanones. These [3+2] and [4+2] cycloadditions provide efficient approaches to a wide range of enantiomerically enriched five- and six-membered ring compounds containing contiguous chiral centers with high to excellent chemo-, diastereo-, and enantioselectivities. The utilities of these protocols are demonstrated by transformation of the cycloadducts into other useful chiral building blocks. DFT calculations reveal the dissimilar reactivity of different electron deficient alkenes and rationalize the mechanism and stereo-control of the reaction. A Pd-catalyzed inverse [3+2] cycloaddition is disclosed.

Palladium-Catalyzed Aromatic C-H Functionalizations Utilizing Electrochemical Oxidations.

Transition-metal-catalyzed electrochemical C-H functionalizations have been extensively studied as atom- and step-economical clean methods in organic synthesis. In this account, we described our efforts on the palladium-catalyzed electrochemical C-H functionalizations, including C-H halogenations of arylpyridines and benzamide derivatives using HCl/HBr and I2 as a halogen source, a one-pot process giving teraryls via the palladium-catalyzed electrochemical C-H iodination and subsequent Suzuki-Miyaura coupling, and an iodine-mediated oxidative homo-coupling reaction of arylpyridines.

Fast and Selective Aqueous-Phase Oxidation of Styrene to Acetophenone Using a Mesoporous Janus-Type Palladium Catalyst.

A heterogeneous Janus-type palladium interphase catalyst was obtained by selective surface modification of a hollow mesoporous silica material. The catalyst comprises hydrophobic octyl groups on one side of the silica nanosheets and single-site bis-imidazoline dichlorido palladium(II) complexes on the other. The structure of this composite material has been analyzed by means of elemental analysis, atomic absorption spectroscopy, BET surface analysis, TGA, SEM and solid-state CP-MAS 13C and 29Si NMR spectroscopy. The catalyst showed extraordinary activity for the aqueous-phase oxidation of styrene to acetophenone using 30% hydrogen peroxide as the oxidant. An 88% yield of acetophenone could be achieved after 60 min.

Chelating Group Enabled Palladium-Catalyzed Regiodivergent Carbonylative Synthesis of 2,3-Dihydroquinolin-4(1H)-ones.

A new procedure on palladium-catalyzed carbonylative cyclization of N-(2-pyridyl)sulfonyl (N-SO2 Py)-2-iodoanilines with terminal alkenes has been developed for the rapid construction of dihydroquinolin-4(1H)-one scaffolds. Enabled by the chelating group and using benzene-1,3,5-triyl triformate (TFBen) as the CO source, both aromatic and aliphatic alkenes were smoothly transformed into the corresponding 2,3-dihydroquinolin-4(1H)-ones in good yields with excellent regioselectivities. Notably, the reaction of aromatic alkenes produces 2-aryl-2,3-dihydroquinolin-4(1H)-ones, while 3-alkyl-2,3-dihydroquinolin-4(1H)-ones were obtained when aliphatic alkenes were used. This protocol has been applied in the synthesis of antitumor agent A as well.

Pd(NHC)(cinnamyl)Cl-catalyzed Suzuki cross-coupling reaction of aryl sulfonates with arylboronic acids.

A series of N-heterocyclic carbene (NHC)-palladium catalysts have been synthesized and applied to catalyze the Suzuki coupling reaction efficiently between aryl sulfonates and arylboronic acids with the potassium phosphate heptahydrate as a base. The desired yields are obtained even with less reactive aryl tosylates or aryl mesylates as substrates. This method was applied successfully to the synthesis of the (R)-2-(t-butoxycarbonylamino)-3-(biphenyl-4-yl)-propan-1-ol which is the key intermediate of sacubitril, a component of the newly approved antihypertensive drug "Entresto."

The composition of transformation products of 2,4,6-trinitrobenzoic acid in the aqueous-phase hydrogenation over Pd/C catalysts.

Due to a detailed analysis of NMR spectra of the reaction solutions with different composition obtained by the aqueous-phase catalytic (Pd/C) hydrogenation of 2,4,6-trinitrobenzoic acid, the intermediate compounds were identified and a more substantiated mechanism was proposed for the formation of the main reaction products-1,3,5-triaminobenzene and cyclohexane-1,3,5-trione trioxime. The condensation of the 1,3,5-triaminobenzene molecules produced by a complete hydrogenation of 2,4,6-trinitrobenzoic acid was shown to result in the formation of a paramagnetic heterocyclic compound.

Palladium-Catalyzed C-H Arylation of Benzofurans with Triarylantimony Difluorides for the Synthesis of 2-Arylbenzofurans.

Pd-catalyzed regioselective C-H arylation is a useful tool for the chemical modification of aromatic heterocycles and 2-arylbenzofuran derivatives are of interest as biologically active substances. Herein, the reaction of triarylantimony difluorides with benzofurans under aerobic conditions in 1,2-DCE, using 5 mol% Pd (OAc)2 and 2 eq. of CuCl2 at 80 °C, produced a variety of 2-arylbenzofurans in moderate-to-high yields. The reaction is sensitive to the electronic nature of the substituents on the benzene ring of the triarylantimony difluorides: an electron-donating group showed higher reactivity than an electron-withdrawing group. Single crystal X-ray analysis of tri(p-methylphenyl) antimony difluoride revealed that the central antimony atom exhibits trigonal bipyramidal geometry.

A Self-Assembling NHC-Pd-Loaded Calixarene as a Potent Catalyst for the Suzuki-Miyaura Cross-Coupling Reaction in Water.

Nanoformulated calix[8]arenes functionalized with N-heterocyclic carbene (NHC)-palladium complexes were found to be efficient nano-reactors for Suzuki-Miyaura cross-coupling reactions of water soluble iodo- and bromoaryl compounds with cyclic triol arylborates at low temperature in water without any organic co-solvent. Combined with an improved one-step synthesis of triol arylborates from boronic acid, this remarkably efficient new tool provided a variety of 4'-arylated phenylalanines and tyrosines in good yields at low catalyst loading with a wide functional group tolerance.

Pd-catalyzed asymmetric Suzuki-Miyaura coupling reactions for the synthesis of chiral biaryl compounds with a large steric substituent at the 2-position.

Pd-catalyzed asymmetric Suzuki-Miyaura couplings of 3-methyl-2-bromophenylamides, 3-methyl-2-bromo-1-nitrobenzene and 1-naphthaleneboronic acids have been successfully developed and the corresponding axially chiral biaryl compounds were obtained in very high yields (up to 99%) with good enantioselectivities (up to 88% ee) under mild conditions. The chiral-bridged biphenyl monophosphine ligands developed by our group exhibit significant superiority to the naphthyl counterpart MOP in both reactivity and enantioselectivity control. The large steric hindrance from π-conjugated ortho-substituents of the bromobenzene substrates and the Pd···O interaction between carbonyl and palladium seem essential to achieve high enantioselectivity.

A Convenient Palladium-Catalyzed Carbonylative Synthesis of (E)-3-Benzylidenechroman-4-ones.

A convenient palladium-catalyzed carbonylation reaction for the efficient synthesis of (E)-3-benzylidenechroman-4-ones has been developed. Using TFBen as a solid CO source, a range of substituted (E)-3-benzylidenechroman-4-ones were prepared in moderate to good yields with 2-iodophenols and allyl chlorides as the substrates. Additionally, substituted quinolin-4(1H)-ones can also be obtained with 2-iodoaniline as the starting material.

A New Heterogeneous Catalyst Obtained via Supramolecular Decoration of Graphene with a Pd2+ Azamacrocyclic Complex.

A new G-(H2L)-Pd heterogeneous catalyst has been prepared via a self-assembly process consisting in the spontaneous adsorption, in water at room temperature, of a macrocyclic H2L ligand on graphene (G) (G + H2L = G-(H2L)), followed by decoration of the macrocycle with Pd2+ ions (G-(H2L) + Pd2+ = G-(H2L)-Pd) under the same mild conditions. This supramolecular approach is a sustainable (green) procedure that preserves the special characteristics of graphene and furnishes an efficient catalyst for the Cu-free Sonogashira cross coupling reaction between iodobenzene and phenylacetylene. Indeed, G-(H2L)-Pd shows an excellent conversion (90%) of reactants into diphenylacetylene under mild conditions (50 °C, water, aerobic atmosphere, 14 h). The catalyst proved to be reusable for at least four cycles, although decreasing yields down to 50% were observed.

Synthesis of a 1,2-Dithienylethene-Containing Donor-Acceptor Polymer via Palladium-Catalyzed Direct Arylation Polymerization (DArP).

This paper reports the synthesis of D-A polymers containing 1,2-dithienylethene (DTE) units via palladium-catalyzed direct arylation polymerization (DArP). The reaction of dibromoisoindigo (1-Br) and DTE (2-H), in the presence of Pd2(dba)3·CHCl3 (0.5 mol%), P(2-MeOC6H4)3 (L1) (2 mol%), pivalic acid (1 equiv) as catalyst precursors, and Cs2CO3 (3 equiv) as a base affords poly(1-alt-2) with a high molecular weight (Mn up to 44,900). Although, it has been known that monomers, with plural C⁻H bonds, tend to form insoluble materials via direct arylation at undesirable C⁻H positions; the reaction of 1-Br and 2-H cleanly proceeds without insolubilization. The resulting polymer has a well-controlled structure and exhibits good charge transfer characteristics in an organic field-effect transistor (OFET), compared to the polymer produced by Migita⁻Kosugi⁻Stille cross-coupling polymerization. The DArP product displays an ideal linear relationship in the current⁻voltage curve, whereas the Migita⁻Kosugi⁻Stille product shows a VG-dependent change in the charge mobility.

Palladium-Catalyzed Carbonylative Multicomponent Reactions.

The achievements on palladium-catalyzed carbonylative multicomponent reactions (CMCR) have been summarized and discussed according to the type of carbonylation reaction involved.

The Palladium Acetate-Catalyzed Microwave-Assisted Hirao Reaction without an Added Phosphorus Ligand as a "Green" Protocol: A Quantum Chemical Study on the Mechanism.

It was proved by our experiments that on microwave irradiation, the mono- or bidentate phosphorus ligands generally applied in the palladium(II)-catalyzed P-C coupling reaction of aryl bromides and dialkyl phosphites or secondary phosphine oxides may be substituted by the excess of the >P(O)H reagent that exists under a tautomeric equilibrium. Taking into account that the reduction of the palladium(II) salt and the ligation of the palladium(0) so formed requires 3 equivalents of the P-species for the catalyst applied in a quantity of 5-10%, all together, 15-30% of the P-reagent is necessary beyond its stoichiometric quantity. In the coupling reaction of diphenylphosphine oxide, it was possible to apply diethyl phosphite as the reducing agent and as the P-ligand. The reactivities of the diethyl phosphite and diphenylphosphine oxide reagents were compared in a competitive reaction. The mechanism and the energetics of this new variation of the Hirao reaction of bromobenzene with Y2P(O)H reagents (Y=EtO and Ph) was explored by quantum chemical calculations. The first detailed study on simple reaction models justified our assumption that, under the conditions of the reaction, the trivalent form of the >P(O)H reagent may serve as the P-ligand in the palladium(0) catalyst, and shed light on the fine mechanism of the reaction sequence. The existence of the earlier described bis(palladium complex) {[H(OPh2P)2PdOAc]2} was refuted by high level theoretical calculations. This kind of complex may be formed only with chloride anions instead of the acetate anion. The interaction of palladium acetate and Y2P(O)H may result in only the formation of the [(HO)Y2P]2Pd complex that is the active catalyst in the Hirao reaction. The new variation of the Hirao reaction is of a more general value, and represents the greenest protocol, as there is no need for the usual P-ligands. Instead, the >P(O)H reagent should be used in an excess of up to 30%. Hence, the costs and environmental burdens may be decreased.