Modulation of active center distance of hybrid perovskite for boosting photocatalytic reduction of carbon dioxide to ethylene.

Solar-driven photocatalytic CO2 reduction is an energy-efficient and sustainable strategy to mitigate CO2 levels in the atmosphere. However, efficient and selective conversion of CO2 into multi-carbon products, like C2H4, remains a great challenge due to slow multi-electron-proton transfer and sluggish C-C coupling. Herein, a two-dimensional thin-layered hybrid perovskite is fabricated through filling of oxygen into iodine vacancy in pristine DMASnI3 (DMA = dimethylammonium). The rational-designed DMASnI3(O) induces shrinkage of active sites distance and facilitates dimerization of C-C coupling of intermediates. Upon simulated solar irradiation, the DMASnI3(O) photocatalyst achieves a high selectivity of 74.5%, corresponding to an impressive electron selectivity of 94.6%, for CO2 to C2H4 conversion and an effective C2H4 yield of 11.2 µmol g-1 h-1. In addition, the DMASnI3(O) inherits excellent water stability and implements long-term photocatalytic CO2 reduction to C2H4 in a water medium. This work establishes a unique paradigm to convert CO2 to C2+ hydrocarbons in a perovskite-based photocatalytic system.

Iron silicate perovskite and postperovskite in the deep lower mantle.

Ferromagnesian silicates are the dominant constituents of the Earth's mantle, which comprise more than 80% of our planet by volume. To interpret the low shear-velocity anomalies in the lower mantle, we need to construct a reliable transformation diagram of ferromagnesian silicates over a wide pressure-temperature (P-T) range. While MgSiO3 in the perovskite structure has been extensively studied due to its dominance on Earth, phase transformations of iron silicates under the lower mantle conditions remain unresolved. In this study, we have obtained an iron silicate phase in the perovskite (Pv) structure using synthetic fayalite (Fe2SiO4) as the starting material under P-T conditions of the lower mantle. Chemical analyses revealed an unexpectedly high Fe/Si ratio of 1.72(3) for the Pv phase in coexistence with metallic iron particles, indicating incorporation of about 25 mol% Fe2O3 in the Pv phase with an approximate chemical formula (Fe2+0.75Fe3+0.25)(Fe3+0.25Si0.75)O3. We further obtained an iron silicate phase in the postperovskite (PPv) structure above 95 GPa. The calculated curves of compressional (VP) and shear velocity (VS) of iron silicate Pv and PPv as a function of pressure are nearly parallel to those of MgSiO3, respectively. To the best of our knowledge, the iron silicate Pv and PPv are the densest phases among all the reported silicates stable at P-T conditions of the lower mantle. The high ferric iron content in the silicate phase and the spin-crossover of ferric iron at the Si-site above ~55 GPa should be taken into account in order to interpret the seismic observations. Our results would provide crucial information for constraining the geophysical and geochemical models of the lower mantle.

Boosting exciton dissociation and charge transfer in CsPbBr3 QDs via ferrocene derivative ligation for CO2 photoreduction.

Photo-catalytic CO2 reduction with perovskite quantum dots (QDs) shows potential for solar energy storage, but it encounters challenges due to the intricate multi-electron photoreduction processes and thermodynamic and kinetic obstacles associated with them. This study aimed to improve photo-catalytic performance by addressing surface barriers and utilizing multiple-exciton generation in perovskite QDs. A facile surface engineering method was employed, involving the grafting of ferrocene carboxylic acid (FCA) onto CsPbBr3 (CPB) QDs, to overcome limitations arising from restricted multiple-exciton dissociation and inefficient charge transfer dynamics. Kelvin Probe Force Microscopy and XPS spectral confirmed successfully creating an FCA-modulated microelectric field through the Cs active site, thus facilitating electron transfer, disrupting surface barrier energy, and promoting multi-exciton dissociations. Transient absorption spectroscopy showed enhanced charge transfer and reduced energy barriers, resulting in an impressive CO2-to-CO conversion rate of 132.8 µmol g-1 h-1 with 96.5% selectivity. The CPB-FCA catalyst exhibited four-cycle reusability and 72 h of long-term stability, marking a significant nine-fold improvement compared to pristine CPB (14.4 µmol g-1 h-1). These results provide insights into the influential role of FCA in regulating intramolecular charge transfer, enhancing multi-exciton dissociation, and improving CO2 photoreduction on CPB QDs. Furthermore, these findings offer valuable knowledge for controlling quantum-confined exciton dissociation to enhance CO2 photocatalysis.

Oxygen vacancy-engineered titanium-based perovskite for boosting H2O activation and lower-temperature hydrolysis of organic sulfur.

Modulation of water activation is crucial to water-involved chemical reactions in heterogeneous catalysis. Organic sulfur (COS and CS2) hydrolysis is such a typical reaction involving water (H2O) molecule as a reactant. However, limited by the strong O-H bond in H2O, satisfactory CS2 hydrolysis performance is attained at high temperature above 310 °C, which is at the sacrifice of the Claus conversion, strongly hindering sulfur recovery efficiency improvement and pollution emissions control of the Claus process. Herein, we report a facile oxygen vacancy (VO) engineering on titanium-based perovskite to motivate H2O activation for enhanced COS and CS2 hydrolysis at lower temperature. Increased amount of VO contributed to improved degree of H2O dissociation to generate more active -OH, due to lower energy barrier for H2O dissociation over surface rich in VO, particularly VO clusters. Besides, low-coordinated Ti ions adjacent to VO were active sites for H2O activation. Consequently, complete conversion of COS and CS2 was achieved over SrTiO3 after H2 reduction treatment at 225 °C, a favorable temperature for the Claus conversion, at which both satisfying COS and CS2 hydrolysis performance and improved sulfur recovery efficiency can be obtained simultaneously. Additionally, the origin of enhanced hydrolysis activity from boosted H2O activation by VO was revealed via in-depth mechanism study. This provides more explicit direction for further design of efficacious catalysts for H2O-involved reactions.

Triggered lattice-oxygen oxidation with active-site generation and self-termination of surface reconstruction during water oxidation.

To master the activation law and mechanism of surface lattice oxygen for the oxygen evolution reaction (OER) is critical for the development of efficient water electrolysis. Herein, we propose a strategy for triggering lattice-oxygen oxidation and enabling non-concerted proton-electron transfers during OER conditions by substituting Al in La0.3Sr0.7CoO3-δ. According to our experimental data and density functional theory calculations, the substitution of Al can have a dual effect of promoting surface reconstruction into active Co oxyhydroxides and activating deprotonation on the reconstructed oxyhydroxide, inducing negatively charged oxygen as an active site. This leads to a significant improvement in the OER activity. Additionally, Al dopants facilitate the preoxidation of active cobalt metal, which introduces great structural flexibility due to elevated O 2p levels. As OER progresses, the accumulation of oxygen vacancies and lattice-oxygen oxidation on the catalyst surface leads to the termination of Al3+ leaching, thereby preventing further reconstruction. We have demonstrated a promising approach to achieving tunable electrochemical reconstruction by optimizing the electronic structure and gained a fundamental understanding of the activation mechanism of surface oxygen sites.

Organic molecular dynamics and charge-carrier lifetime in lead iodide perovskite MAPbI3.

The long charge carrier lifetime of the hybrid organic-inorganic perovskites (HOIPs) is the key for their remarkable performance as a solar cell material. The microscopic mechanism for the long lifetime is still in debate. Here, by using a muon spin relaxation technique that probes the fluctuation of local magnetic fields, we show that the muon depolarization rate (Δ) of a prototype HOIP methylammonium lead iodide (MAPbI3) shows a sharp decrease with increasing temperature in two steps above 120 K and 190 K across the structural transition from orthorhombic to tetragonal structure at 162 K. Our analysis shows that the reduction of Δ is quantitatively in agreement with the expected behavior due to the rapid development of methyl ammonium (MA) jumping rotation around the C 3 and C 4 symmetry axes. Our results provide direct evidence for the intimate relation between the rotation of the electric dipoles of MA molecules and the charge carrier lifetime in HOIPs.

Efficient Homojunction Tin Perovskite Solar Cells Enabled by Gradient Germanium Doping.

P-type self-doping is known to hamper tin-based perovskites for developing high-performance solar cells by increasing the background current density and carrier recombination processes. In this work, we propose a gradient homojunction structure with germanium doping that generates an internal electric field across the perovskite film to deplete the charge carriers. This structure reduces the dark current density of perovskite by over 2 orders of magnitude and trap density by an order of magnitude. The resultant tin-based perovskite solar cells exhibit a higher power conversion efficiency of 13.3% and excellent stability, maintaining 95% and 85% of their initial efficiencies after 250 min of continuous illumination and 3800 h of storage, respectively. We reveal the homojunction formation mechanism using density functional theory calculations and molecular level characterizations. Our work provides a reliable strategy for controlling the spatial energy levels in tin perovskite films and offers insights into designing intriguing lead-free perovskite optoelectronics.

Ruddlesden-Popper Perovskite Nanocrystals as Interface Modification Layer for Efficient Perovskite Solar Cells.

Perovskite nanocrystals are advantageous for interfacial passivation of perovskite solar cells (PSCs), but the insulating long alkyl chain surface ligands impede the charge transfer, while the conventional ligand exchange would possibly introduce surface defects to the nanocrystals. In this work, we reported novel in situ modification of CsPbBr3 nanocrystals using a short chain conjugated molecule 2-methoxyphenylethylammonium iodide (2-MeO-PEAI) for interfacial passivation of PSCs. Transmission electron microscopy studies with atomic resolution unveil the transformation from cubic CsPbBr3 to Ruddlesden-Popper phase (RPP) nanocrystals due to halogen exchange. Synergic passivation by the RPP nanocrystals and 2-MeO-PEA+ has led to suppressed interface defects and enhanced charge carrier transport. Consequently, PSCs with in situ modified RPP nanocrystals achieved a champion power conversion efficiency of 24.39%, along with an improvement in stability. This work brings insights into the microstructural evolution of perovskite nanocrystals, providing a novel and feasible approach for interfacial passivation of PSCs.

Orbital Interactions in 2D Dion-Jacobson Perovskites Using Oligothiophene-Based Semiconductor Spacers Enable Efficient Solar Cells.

2D Dion-Jacobson (DJ) perovskites have emerged as promising photovoltaic materials, but the insulating organic spacer has hindered the efficient charge transport. Herein, we successfully synthesized a terthiophene-based semiconductor spacer, namely, 3ThDMA, for 2D DJ perovskite. An interesting finding is that the energy levels of 3ThDMA extensively overlap with the inorganic components and directly contribute to the band formation of (3ThDMA)PbI4, leading to enhanced charge transport across the organic spacer layers, whereas no such orbital interactions were found in (UDA)PbI4, a DJ perovskite based on 1,11-undecanediaminum (UDA). The devices based on (3ThDMA)MAn-1PbnI3n+1 (nominal n = 5) obtained a champion efficiency of 15.25%, which is a record efficiency for 2D DJ perovskite solar cells using long-conjugated spacers (conjugated rings ≥ 3) and a 22.60% efficiency for 3ThDMA-treated 3D PSCs. Our findings provide an important insight into understanding the orbital interactions in 2D DJ perovskite using an organic semiconductor spacer for efficient solar cells.

Perovskite Quantum Dots Lasing in Double-Heterostructure through Energy Transfer.

Planar double heterostructures were initially investigated and have been successfully applied in III-V semiconductor lasers due to their excellent roles in confining both the photons and carriers. Here, we design and fabricate a (PEA)2Csn-1PbnX3n+1 (quasi-2D)/CsPbBr3 QD/quasi-2D double-heterostructure sandwiched in a 3/2 λ DBR microcavity, and then demonstrate a single-mode pure-green lasing with a threshold of 53.7 µJ/cm2 under nanosecond-pulsed optical pumping. The thresholds of these heterostructure devices decrease statistically by about 50% compared to the control group with no energy donor layers, PMMA/QD/PMMA in an identical microcavity. We show that there is efficient energy transfer from the barrier regions of the quasi-2D phases to the QD layer by transient absorption and luminescence lifetime spectra and that such energy transfer leads to marked threshold reduction. This work indicates that the double-heterostructure configurations should play a significant role in the future perovskite electrically pumped laser.

Influence of Material Properties on Surface Chemistry Induced Circular Dichroism in Halide Perovskite: Computational Insights.

The chirality transfer phenomenon is attractive for enhancing the optical functionality of nanomaterials by inducing sensitivity to the circular polarization states of photons. An underexplored aspect is how material properties of the achiral semiconductor impact the induced chiroptical signatures. Here we apply atomistic time-dependent density functional theory simulations to investigate the material properties that influence the chiroptical signatures of a lead halide perovskite nanocrystal with a chiral molecule bound to the surface. First, we find that both lattice disorder created by surface strain and halide substitution can increase the chiroptical response of the perovskite quantum dots by an order of magnitude. Both phenomena are attributed to a broadening of the density of the electronically excited states. Second, the intensity of the anisotropy spectra decreases with increasing dot size with a power law decay. Overall, these insights can be used to help guide experimental realization of highly resolvable polarized optical features in semiconducting nanomaterials.

High Current Efficiency Red Perovskite Light-Emitting Diodes Meeting Rec. 2020 Standard.

Cesium lead iodide light-emitting diodes (LEDs) are attractive for displays due to their Rec. 2020 red standard compliance. However, achieving high current efficiencies (CEs), which is important for displays, is challenging because their emission spectrum is near the tail of the photopic luminosity function. Substituting some iodine with bromine can improve CEs by enlarging the bandgap, but defects easily form in iodine-bromine mixed perovskites. Here, we successfully reduced defect formation by adding organic ammonium salts and zwitterions. The organic ammonium salts do not form low-dimensional perovskites under the hydrogen bonding interaction of zwitterions. Instead, they passivate the cesium vacancy by forming new hydrogen bonds after perovskite crystallization. This approach leads to a red perovskite LED with a high CE of 12.8 cd A-1 and a peak external quantum efficiency of 20.3%, meeting the Rec. 2020 standard. It can be extended to large-area devices (2500 mm2) without a significant efficiency loss.

Phonon Directionality Impacts Electron-Phonon Coupling and Polarization of the Band-Edge Emission in Two-Dimensional Metal Halide Perovskites.

Two-dimensional metal halide perovskites are highly versatile for light-driven applications due to their exceptional variety in material composition, which can be exploited for the tunability of mechanical and optoelectronic properties. The band-edge emission is defined by the structure and composition of both organic and inorganic layers, and electron-phonon coupling plays a crucial role in the recombination dynamics. However, the nature of the electron-phonon coupling and what kind of phonons are involved are still under debate. Here we investigate the emission, reflectance, and phonon response from single two-dimensional lead iodide microcrystals with angle-resolved polarized spectroscopy. We find an intricate dependence of the emission polarization with the vibrational directionality in the materials, which reveals that several bands of low-frequency phonons with nonorthogonal directionality contribute to the band-edge emission. Such complex electron-phonon coupling requires adequate models to predict the thermal broadening of the emission and provides opportunities to design polarization properties.

Regulating the Grain-Growth Surface for Efficient Near-Infrared Perovskite Light-Emitting Diodes.

Metal halide perovskites hold great potential for next-generation light-emitting diodes (PeLEDs). Despite significant progress, achieving high-performance PeLEDs hinges on optimizing the interface between the perovskite crystal film and the charge transport layers, especially the buried interface, which serves as the starting point for perovskite growth. Here, we develop a bottom-up perovskite film modulation strategy using formamidine acetate (FAAc) to enhance the buried interface. This multifaceted approach facilitates the vertical-oriented growth of high-quality perovskites with minimized defects. Meanwhile, the in situ deprotonation between FA+ and ZnO could eliminate the hydroxyl (-OH) defects and modulate the energy level of ZnO. The resulting FAPbI3-PeLED exhibits a champion EQE of 23.84% with enhanced operational stability and suppressed EQE roll-off. This strategy is also successfully extended to other mixed-halide PeLEDs (e.g., Cs0.17FA0.83Pb(I0.75Br0.25)3), demonstrating its versatility as an efficient and straightforward method for enhancing the PeLEDs' performance.

Inorganic Halide Perovskite Nanowires/Conjugated Polymer Heterojunction-Based Optoelectronic Synaptic Transistors for Dynamic Machine Vision.

Inspired by the retina, artificial optoelectronic synapses have groundbreaking potential for machine vision. The field-effect transistor is a crucial platform for optoelectronic synapses that is highly sensitive to external stimuli and can modulate conductivity. On the basis of the decent optical absorption, perovskite materials have been widely employed for constructing optoelectronic synaptic transistors. However, the reported optoelectronic synaptic transistors focus on the static processing of independent stimuli at different moments, while the natural visual information consists of temporal signals. Here, we report CsPbBrI2 nanowire-based optoelectronic synaptic transistors to study the dynamic responses of artificial synaptic transistors to time-varying visual information for the first time. Moreover, on the basis of the dynamic synaptic behavior, a hardware system with an accuracy of 85% is built to the trajectory of moving objects. This work offers a new way to develop artificial optoelectronic synapses for the construction of dynamic machine vision systems.

Observation of Ferromagnetism in Dilute Magnetic Halide Perovskite Semiconductors.

Dilute magnetic semiconductors (DMSs) have attracted much attention because of their potential use in spintronic devices. Here, we demonstrate the observation of robust ferromagnetism in a solution-processable halide perovskite semiconductor with dilute magnetic ions. By codoping of magnetic (Fe2+) and aliovalent (Bi3+) metal ions into CH3NH3PbCl3 (MAPbCl3) perovskite, ferromagnetism with well-saturated magnetic hysteresis loops and a maximum coercivity field of 1280 Oe was observed below 12 K. The ferromagnetic resonance measurements revealed that the incorporation of aliovalent ions modulates the carrier concentration and plays an essential role in realizing the ferromagnetism in dilute magnetic halide perovskites. Magnetic ions are proposed to interact through itinerant charge carriers to achieve ferromagnetic coupling. Our work provides a new avenue for the development of solution-processable magnetic semiconductors.

Is Dielectric Mismatch Actually Important in 2D Perovskites?

Understanding and controlling exciton properties are important for the design of 2D semiconductors, such as monolayer transition metal dichalcogenides (TMDCs) and 2D halide perovskites (HPs). This paper demonstrates that the widespread strategy used for the exciton engineering of 2D HPs, based on dielectric mismatch, is flawed since dielectric mismatch has very little correlation with exciton properties. For monolayer TMDCs, however, the dielectric mismatch is shown to be more important.

van der Waals Integration of Large-Area Monocrystalline 3D Perovskite Thin Films on Arbitrary Semiconductor Substrates for Heterojunctions.

Perovskite monocrystalline films are regarded as desirable candidates for the integration of high-performance optoelectronics due to their unique photophysical properties. However, the heterogeneous integration of a perovskite monocrystalline film with other semiconductors is fundamentally limited by the lattice mismatch, which hinders direct epitaxy. Herein, the van der Waals (vdW) integration strategy for 3D perovskites is developed, where perovskite monocrystalline films are epitaxially grown on the mother substrate, followed by its peeling off and transferring to arbitrary semiconductors, forming monocrystalline heterojunctions. The as-achieved CsPbBr3-Nb-doped SrTiO3 (Nb:STO) vdW p-n heterojunction exhibited comparable performance to their directly epitaxial counterpart, demonstrating the feasibility of vdW integration for 3D perovskites. Furthermore, the vdW integration could be extended to silicon substrates, rendering the CsPbBr3-n-Si and CsPbCl3-p-Si p-n heterojunction with apparent rectification behaviors and photoresponse. The vdW integration significantly enriches the selections of semiconductors hybridizing with perovskites and provides opportunities for monocrystalline perovskite optoelectronics with complex configurations and multiple functionalities.

Precursor Engineering Induced High-Efficiency Electroluminescence of Quasi-Two-Dimensional Perovskites: A Synergistic Defect Inhibition and Passivation Approach.

Despite light-emitting diodes (LEDs) based on quasi-two-dimensional (Q-2D) perovskites being inexpensive and exhibiting high performance, defects still limit the improvement of electroluminescence efficiency and stability by causing nonradiative recombination. Here, an organic molecule, 1-(o-tolyl) biguanide, is used to simultaneously inhibit and passivate defects of Q-2D perovskites via in situ synchronous crystallization. This molecule not only prevents surface bromine vacancies from forming through hydrogen bonding with the bromine of intermediaries but also passivates surface defects through its interaction with uncoordinated Pb. Via combination of defect inhibition and passivation, the trap density of Q-2D perovskite films can be significantly reduced, and the emission efficiency of the film can be improved. Consequently, the corresponding LED shows an external quantum efficiency of 24.3%, and its operational stability has been increased nearly 15 times.

High Efficiency and Low Roll-Off Pure-Red Perovskite LED Enabled by Simultaneously Inhibiting Auger and Trap Recombination of Quantum Dots.

CsPbI3 perovskite quantum dots (QDs) could achieve pure-red emission by reducing their size, but the increased exciton binding energy (EB) and surface defects for the small-sized QDs (SQDs) cause severe Auger and trap recombinations, thus worsening their electroluminescence (EL) performance. Herein, we utilize the dangling bonds of the SQDs as a driving force to accelerate KI dissolution to solve its low solubility in nonpolar solvents, thereby allowing K+ and I- to bond to the surface of SQDs. The EB of the SQDs was decreased from 305 to 51 meV because of the attraction of K+ to electrons, meanwhile surface vacancies were passivated by K+ and I-. The Auger and trap recombinations were simultaneously suppressed by this difunctional ligand. The SQD-based light-emitting diode showed a stable pure-red EL peak of 639 nm, an external quantum efficiency of 25.1% with low roll-off, and a brightness of 5934 cd m-2.