RESUMEN
The novel depth-sensing system presented here revolutionizes structured light (SL) technology by employing metasurfaces and photonic crystal surface-emitting lasers (PCSELs) for efficient facial recognition in monocular depth-sensing. Unlike conventional dot projectors relying on diffractive optical elements (DOEs) and collimators, our system projects approximately 45,700 infrared dots from a compact 297-µm-dimention metasurface, drastically more spots (1.43 times) and smaller (233 times) than the DOE-based dot projector in an iPhone. With a measured field-of-view (FOV) of 158° and a 0.611° dot sampling angle, the system is lens-free and lightweight and boasts lower power consumption than vertical-cavity surface-emitting laser (VCSEL) arrays, resulting in a 5-10 times reduction in power. Utilizing a GaAs-based metasurface and a simplified optical architecture, this innovation not only addresses the drawbacks of traditional SL depth-sensing but also opens avenues for compact integration into wearable devices, offering remarkable advantages in size, power efficiency, and potential for widespread adoption.
RESUMEN
Metasurfaces, a catalog of optical components, offer numerous novel functions on demand. They have been integrated with vertical cavity surface-emitting lasers (VCSELs) in previous studies. However, the performance has been limited by the features of the VCSELs such as low output power and large divergence angle. Although the solution of the module of VCSEL array could solve these issues, the practical application is limited by extra lens and large size. In this study, we experimentally demonstrate reconstruction of a holographic images using a compact integration of a photonic crystal surface-emitting laser and metasurface holograms designed for structured light generation. This research showcases the flexible design capabilities of metasurfaces, high output power (on the order of milliwatts), and the ability to produce well-uniformed images with a wide field of view without the need for a collection lens, making it suitable for 3D imaging and sensing.
RESUMEN
Free-space optical communications hold promising advantages, including a large bandwidth, access to license-free spectrum, high data rates, quick and simple deployment, low power consumption, and relaxed quality requirements. Nevertheless, key technical challenges remain, such as a higher transmission efficiency, a lower transmission loss, and a smaller form factor of optical systems. Here, we demonstrate the viability of circular-polarization-multiplexed multi-channel optical communication using metasurfaces alongside a photonic-crystal surface-emitting laser (PCSEL) light source at wavelength of 940 nm. Through the light manipulation with metasurface, we split the linearly polarized incidence into left and right circular polarizations with desired diffraction angles. Such orthogonal polarization states provide a paradigm of polarization division multiplexing technique for light communication. The PCSEL light source maintains a low divergence angle of about 0.373 degrees after passing through an ultra-thin metasurface without further bulky collimator or light guide, making end-to-end (E2E) and device-to-device (D2D) communications available in a compact form. Both light source and modulated polarized light exhibit a - 3 dB bandwidth over 500 MHz, with successful 1 Gbit/s transmission demonstrated in eye diagrams. Our results affirm that metasurface effectively boosts transmission capacity without compromising the light source's inherent properties. Future metasurface designs could expand channel capacity, and its integration with PCSEL monolithically holds promise for reducing interface losses, thereby enhancing efficiency.
RESUMEN
Photonic-crystal surface-emitting lasers have many promising properties over traditional semiconductor lasers and are regarded as the next-generation laser sources. However, the minimum achievable lasing threshold of PCSELs is still several times larger than that of VCSELs, and limiting its applications especially if the required power is small. Here, we propose a new design that reduces the gain region in the lateral plane by using selective quantum-well intermixing to reduce the threshold current of PCSELs. By performing theoretical calculations, we confirmed that the threshold current can be lowered by a factor of two to three while keeping the PCSEL's advantage of small divergence angle.
RESUMEN
This study conducts comprehensive performance analyses of a commercial photonic-crystal surface-emitting laser (PCSEL) via small-signal measurement and the bit-error-rate test. Meanwhile, the radio frequency characteristics of the PCSEL are unveiled for the first time. Compared to the vertical-cavity surface-emitting lasers, the PCSEL shows great potential for a broader optical bandwidth that is benefited from the high optical-confinement factor. A maximum bandwidth of around 2.32 GHz is experimentally observed when the PCSEL was biased at 340 mA. Moreover, a theoretical calculation was applied to shed light on the characteristics of the small-signal measurement, providing a deep insight into the corresponding intrinsic response model. The signal transmission capability of the PCSEL was investigated as well. The maximum bit rate and corresponding rise time transmitted at 500 Mbps are 1.2 Gbps and 186.16 ps, respectively. Thus, a high-speed PCSEL can be realised with a shrunk form factor, serving as a promising candidate for the next-generation light sources in high-speed optical communication.