Steering lithium and potassium storage mechanism in covalent organic frameworks by incorporating transition metal single atoms.

Organic electrodes mainly consisting of C, O, H, and N are promising candidates for advanced batteries. However, the sluggish ionic and electronic conductivity limit the full play of their high theoretical capacities. Here, we integrate the idea of metal-support interaction in single-atom catalysts with π-d hybridization into the design of organic electrode materials for the applications of lithium (LIBs) and potassium-ion batteries (PIBs). Several types of transition metal single atoms (e.g., Co, Ni, Fe) with π-d hybridization are incorporated into the semiconducting covalent organic framework (COF) composite. Single atoms favorably modify the energy band structure and improve the electronic conductivity of COF. More importantly, the electronic interaction between single atoms and COF adjusts the binding affinity and modifies ion traffic between Li/K ions and the active organic units of COFs as evidenced by extensive in situ and ex situ characterizations and theoretical calculations. The corresponding LIB achieves a high reversible capacity of 1,023.0 mA h g-1 after 100 cycles at 100 mA g-1 and 501.1 mA h g-1 after 500 cycles at 1,000 mA g-1. The corresponding PIB delivers a high reversible capacity of 449.0 mA h g-1 at 100 mA g-1 after 150 cycles and stably cycled over 500 cycles at 1,000 mA g-1. This work provides a promising route to engineering organic electrodes.

Engineering contact curved interface with high-electronic-state active sites for high-performance potassium-ion batteries.

Potassium-ion batteries (PIBs) have attracted ever-increasing interest due to the abundant potassium resources and low cost, which are considered a sustainable energy storage technology. However, the graphite anodes employed in PIBs suffer from low capacity and sluggish reaction kinetics caused by the large radius of potassium ions. Herein, we report nitrogen-doped, defect-rich hollow carbon nanospheres with contact curved interfaces (CCIs) on carbon nanotubes (CNTs), namely CCI-CNS/CNT, to boost both electron transfer and potassium-ion adsorption. Density functional theory calculations validate that engineering CCIs significantly augments the electronic state near the Fermi level, thus promoting electron transfer. In addition, the CCIs exhibit a pronounced affinity for potassium ions, promoting their adsorption and subsequently benefiting potassium storage. As a result, the rationally designed CCI-CNS/CNT anode shows remarkable cyclic stability and rate capability. This work provides a strategy for enhancing the potassium storage performance of carbonaceous materials through CCI engineering, which can be further extended to other battery systems.

Regulating cathode surface hydroxyl chemistry enables superior potassium storage.

Potassium vanadium fluorophosphate (KVPO4F) is regarded as a promising cathode candidate for potassium-ion batteries due to its high working voltage and satisfactory theoretical capacity. However, the usage of electrochemically inactive binders and redundant current collectors typically results in inferior electrochemical performance and low energy density, thus implying the important role of rational electrode structure design. Herein, we have reported a scalable and cost-effective synthesis of a cellulose-derived KVPO4F self-supporting electrode, which features a special surface hydroxyl chemistry, three-dimensional porous and conductive framework, as well as super flexible and stable architecture. The cellulose not only serves as a flexible substrate, a pore-forming agent, and a versatile binder for KVPO4F/conductive carbon but also enhances the K-ion migration ability. Benefiting from the special hydroxyl chemistry-induced storage mechanism and electrode structural stability, the flexible freestanding KVPO4F cathode exhibits high-rate performance (53.0% capacity retention with current densities increased 50-fold, from 0.2 C to 10 C) and impressive cycling stability (capacity retention up to 74.9% can be achieved over 1,000 cycles at a rate of 5 C). Such electrode design and surface engineering strategies, along with a deeper understanding of potassium storage mechanisms, provide invaluable guidance for better electrode design to boost the performance of potassium-ion energy storage systems.

Extremely Durable K-Ion Batteries Enabled by Heteroatom Co-Doped Highly-Ordered Porous Carbon Spheres with Nearly 100% Capacity Retention up to 11,000 Cycles.

Currently, one major target for exploring K-ion batteries (KIBs) is enhancing their cycle stability due to the intrinsically sluggish kinetics of large-radius K+ ions. Herein, we report a rationally designed electrode, the S/O co-doped hard carbon spheres with highly ordered porous characteristics (SPC), for extremely durable KIBs. Experimental results and theory calculations confirm that this structure offers exceptional advantages for high-performance KIBs, facilitating rapid K+ diffusion and (de)-intercalation, efficient electrolyte penetration and transport, improved K+ storage sites, and enhanced redox reaction kinetics, thus ensuring the long-term cycle stability. As a result, the as-constructed SPC anode delivers a high reversible capacity of ca. 200 mAh g-1 at a high current density of 2.0 A g-1 and robust stability with ∼100% capacity retention up to 11,000 cycles, outperforming most carbon-based KIB anodes. This work offers insight into developing advanced KIBs with durable stability toward practical applications.

Ether-Based Gel Polymer Electrolyte for High-Voltage Potassium Ion Batteries.

Low-concentration ether electrolytes cannot efficiently achieve oxidation resistance and excellent interface behavior, resulting in severe electrolyte decomposition at a high voltage and ineffective electrode-electrolyte interphase. Herein, we utilize sandwich structure-like gel polymer electrolyte (GPE) to enhance the high voltage stability of potassium-ion batteries (PIBs). The GPE contact layer facilitates stable electrode-electrolyte interphase formation, and the GPE transport layer maintains good ionic transport, which enabled GPE to exhibit a wide electrochemical window and excellent electrochemical performance. In addition, Al corrosion under a high voltage is suppressed through the restriction of solvent molecules. Consequently, when using the designed GPE (based on 1 m), the K||graphite cell exhibits excellent cycling stability of 450 cycles with a capacity retention of 91%, and the K||FeFe-Prussian blue cell (2-4.2 V) delivers a high average Coulombic efficiency of 99.9% over 2200 cycles at 100 mA g-1. This study provides a promising path in the application of ether-based electrolytes in high-voltage and long-lasting PIBs.

Deciphering the Formation and Accumulation of Solid-Electrolyte Interphases in Na and K Carbonate-Based Batteries.

The continuous solid-electrolyte interphase (SEI) accumulation has been blamed for the rapid capacity loss of carbon anodes in Na and K ethylene carbonate (EC)/diethyl carbonate (DEC) electrolytes, but the understanding of the SEI composition and its formation chemistry remains incomplete. Here, we explain this SEI accumulation as the continuous production of organic species in solution-phase reactions. By comparing the NMR spectra of SEIs and model compounds we synthesized, alkali metal ethyl carbonate (MEC, M = Na or K), long-chain alkali metal ethylene carbonate (LCMEC, M = Na or K), and poly(ethylene oxide) (PEO) oligomers with ethyl carbonate ending groups are identified in Na and K SEIs. These components can be continuously generated in a series of solution-phase nucleophilic reactions triggered by ethoxides. Compared with the Li SEI formation chemistry, the enhancement of the nucleophilicity of an intermediate should be the cause of continuous nucleophilic reactions in the Na and K cases.

Electrolyte-Induced Morphology Evolution to Boost Potassium Storage Performance of Perylene-3,4,9,10-tetracarboxylic Dianhydride.

Organic materials have attracted extensive attention for potassium-ion batteries due to their flexible structure designability and environmental friendliness. However, organic materials generally suffer from unavoidable dissolution in aprotic electrolytes, causing an unsatisfactory electrochemical performance. Herein, we designed a weakly solvating electrolyte to boost the potassium storage performance of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). The electrolyte induces an in situ morphology evolution and achieves a nanowire structure. The weakly dissolving capability of ethylene glycol diethyl ether-based electrolyte and unique nanowire structure effectively avoid the dissolution of PTCDA. As a result, PTCDA shows excellent cycling stability (a capacity retention of 89.1% after 2000 cycles) and good rate performance (70.3 mAh g-1 at 50C). In addition, experimental detail discloses that the sulfonyl group plays a key role in inducing morphology evolution during the charge/discharge process. This work opens up new opportunities in electrolyte design for organic electrodes and illuminates further developments of potassium-ion batteries.

Revealing the Charge Storage Mechanism in Porous Carbon to Achieve Efficient K Ion Storage.

Constructing a porous structure is considered an appealing strategy to improve the electrochemical properties of carbon anodes for potassium-ion batteries (PIBs). Nevertheless, the correlation between electrochemical K-storage performance and pore structure has not been well elucidated, which hinders the development of high-performance carbon anodes. Herein, various porous carbons are synthesized with porosity structures ranging from micropores to micro/mesopores and mesopores, and systematic investigations are conducted to establish a relationship between pore characteristics and K-storage performance. It is found that micropores fail to afford accessible active sites for K ion storage, whereas mesopores can provide abundant surface adsorption sites, and the enlarged interlayer spacing facilitates the intercalation process, thus resulting in significantly improved K-storage performances. Consequently, PCa electrode with a prominent mesoporous structure achieves the highest reversible capacity of 421.7 mAh g-1 and an excellent rate capability of 191.8 mAh g-1 at 5 C. Furthermore, the assembled potassium-ion hybrid capacitor realizes an impressive energy density of 151.7 Wh kg-1 at a power density of 398 W kg-1. The proposed work not only deepens the understanding of potassium storage in carbon materials with distinctive porosities but also paves a path toward developing high-performance anodes for PIBs with customized energy storage capabilities.

In Situ Defect Engineering in Carbon by Atomic Self-Activation to Boost the Accessible Low-Voltage Insertion for Advanced Potassium-Ion Full-Cells.

Enhancing the low-potential capacity of anode materials is significant in boosting the operating voltage of full-cells and constructing high energy-density energy storage devices. Graphitic carbons exhibit outstanding low-potential potassium storage performance, but show a low K+ diffusion kinetics. Herein, in situ defect engineering in graphitic nanocarbon is achieved by an atomic self-activation strategy to boost the accessible low-voltage insertion. Graphitic carbon layers grow on nanoscale-nickel to form the graphitic nanosphere with short-range ordered microcrystalline due to nickel graphitization catalyst. Meanwhile, the widely distributed K+ in the precursor induces the activation of surrounding carbon atoms to in situ generate carbon vacancies as channels. The graphite microcrystals with defect channels realize reversible K+ intercalation at low-potential and accessible ion diffusion kinetics, contributing to high reversible capacity (209 mAh g-1 at 0.05 A g-1 under 0.8 V) and rate capacity (103.2 mAh g-1 at 1 A g-1). The full-cell with Prussian blue cathode and graphitic nanocarbon anode maintains an obvious working platform at ca. 3.0 V. This work provides a strategy for the in situ design of carbon anode materials and gives insights into the potassium storage mechanism at low-potential for high-performance full-cells.

Heterostructures Assembled from Bi2O2CO3 and MXene for Boosted Potassium-Ion Storage by Arousing the Built-in Electric Field.

Bismuth-based materials have been recognized as the appealing anodes for potassium-ion batteries (PIBs) due to their high theoretical capacity. However, the kinetics sluggishness and capacity decline induced by the structure distortion predominately retard their further development. Here, a heterostructure of polyaniline intercalated Bi2O2CO3/MXene (BOC-PA/MXene) hybrids is reported via simple self-assembly strategy. The ingenious design of heterointerface-rich architecture motivates significantly the interior self-built-in electric field (IEF) and high-density electron flow, thus accelerating the charge transfer and boosting ion diffusion. As a result, the hybrids realize a high reversible specific capacity, satisfying rate capability as well as long-term cycling stability. The in/ex situ characterizations further elucidate the stepwise intercalation-conversion-alloying reaction mechanism of BOC-PA/MXene. More encouragingly, the full cell investigation further highlights its competitive merits for practical application in further PIBs. The present work not only opens the way to the design of other electrodes with an appropriate working mechanism but also offers inspiration for built-in electric-field engineering toward high-performance energy storage devices.

Tetrahedral Occupied V Ions Enabling Reversible Three-Electron Redox of Cr3+ /Cr6+ in Layered Cathode Materials for Potassium-Ion Batteries.

Reversible three-electron redox of Cr3+ /Cr6+ in layered cathode materials for rechargeable batteries is very attractive in layered cathode materials, which leads to high capacity and energy density for rechargeable batteries. However, the poor reversibility and Cr-ion migration make it very challenging. In this work, by introducing V ions into tetrahedral sites of layer-structured NaCrO2 , reversible three-electron redox of Cr3+ /Cr6+ is realized successfully in NaCr0.92 V0.05 O2 (NCV05) cathode for potassium-ion batteries with a cut-off voltage of 4.0 V. V ions can weaken the attraction of Cr to electrons, leading to enhanced valence change of Cr ions. On the other hand, V in tetrahedral sites can facilitate the reversible migration of Cr between octahedral and tetrahedral sites via coulombic repulsion to realize the reversible redox between Cr3+ and Cr6+ during charge and discharge processes. In addition, V ions can inhibit the phase transition from O3 phase to O'3 phase during the charge process by adjusting the crystal lattices. As a result, the NaCr0.92 V0.05 O2 cathode exhibits a high reversible capacity of 130 mAh g-1 with promising cycle stability and rate capability. The strategy opens new opportunity for developing high-capacity cathode materials for potassium-ion batteries.

Metal Selenides Find Plenty of Space in Architecting Advanced Sodium/Potassium Ion Batteries.

The rapid evolution of smart grid system urges researchers on exploiting systems with properties of high-energy, low-cost, and eco-friendly beyond lithium-ion batteries. Under the circumstances, sodium- and potassium-ion batteries with the semblable work mechanism to commercial lithium-ion batteries, hold the merits of cost-effective and earth-abundant. As a result, it is deemed a promising candidate for large-scale energy storage devices. Exploiting appropriate active electrode materials is in the center of the spotlight for the development of batteries. Metal selenides with special structures and relatively high theoretical capacity have aroused broad interest and achieved great achievements. To push the smooth development of metal selenides and enhancement of the electrochemical performance of sodium- and potassium-ion batteries, it is vital to grasp the inherent properties and electrochemical mechanisms of these materials. Herein, the state-of-the-art development and challenges of metal selenides are summarized and discussed. Meanwhile, the corresponding electrochemical mechanism and future development directions are also highlighted.

Efficient Self-Assembly Preparation of 3D Carbon-Supported Ti3 C2 Tx Hollow Spheres for High-Performance Potassium Ion Batteries.

MXenes are considered a promising negative electrode material for potassium ion batteries (PIBs) in view of their low potassium ion diffusion barrier and excellent electrical conductivity. However, the stacking phenomenon in practical applications severely reduces their active surface and leads to slow K+ diffusion. Herein, a facile composite template method is proposed to construct stacking-resistance 3D carbon-supported Ti3 C2 Tx (3D-C@Ti3 C2 Tx ) hollow spheres. Due to the unique structure, when used as a negative electrode material, as-prepared 3D-C@Ti3 C2 Tx hollow spheres show not only improved rate capability with 160.4 mAh g-1 at 100 mA g-1 and 133.7 mAh g-1 at 500 mA g-1 , but also stable cycling performance with 142.5 mAh g-1 specific capacity remained at 2 A g-1 after 4200 cycles. Furthermore, the full cells with 3D-C@Ti3 C2 Tx anode can operate stably for 1000 cycles at 100 mA g-1 . Moreover, the linear fit analysis demonstrates that 3D-C@Ti3 C2 Tx hollow spheres have a fast and stable capacitive potassium storage mechanism. This method is simple and easy to implement, which provide a feasible path to solve the stacking problem of 2D materials.

Hierarchically Superstructured Anisotropic Carbon Particles by Multiscale Assembly Driven by Spinodal Decomposition.

Hierarchical superstructures have novel shape-dependent properties, but well-defined anisotropic carbon superstructures with controllable size, shape, and building block dimensionality have rarely been accomplished thus far. Here, a hierarchical assembly technique is presented that uses spinodal decomposition (SD) to synthesize anisotropic oblate particles of mesoporous carbon superstructure (o-MCS) with nanorod arrays by integrating block-copolymer (BCP) self-assembly and polymer-polymer interface behaviors in binary blends. The interaction of major and minor phases in binary polymer blends leads to the formation of an anisotropic oblate particle, and the BCP-rich phase enables ordered packing and unidirectional alignment of carbon nanorods. Consequently, this approach enables precise control over particles' size, shape, and over the dimensionality of their components. Exploiting this functional superstructure, o-MCS are used as an anode material in potassium-ion batteries, and achieve a notable specific capacity of 156 mA h g-1 at a current density of 2 A g-1, and long-term stability for 3000 cycles. This work presents a significant advancement in the field of hierarchical superstructures, providing a promising strategy for the design and synthesis of anisotropic carbon materials with controlled properties, offering promising applications in energy storage and beyond.

Construction of Sugar-Gourd-Shaped Carbon Nanofibers Embedded with Heterostructured Zinc-Cobalt Selenide Nanocages for Superior Potassium-Ion Storage.

Transition metal selenides are considered as promising anode materials for potassium-ion batteries (PIBs) due to their high theoretical capacities. However, their applications are limited by low conductivity and large volume expansion. Herein, sugar-gourd-shaped carbon nanofibers embedded with heterostructured ZnCo-Se nanocages are prepared via a facile template-engaged method combined with electrospinning and selenization process. In this hierarchical ZnCo-Se@NC/CNF, abundant phase boundaries of CoSe2/ZnSe heterostructure can promote interfacial electron transfer and chemical reactivity. The interior porous ZnCo-Se@NC nanocage structure relieves volume expansion and maintains structural integrity during K+ intercalation and deintercalation. The exterior spinning carbon nanofibers connect the granular nanocages in series, which prevents the agglomeration, shortens the electron transport distance and enhances the reaction kinetics. As a self-supporting anode material, ZnCo-Se@NC/CNF delivers a high capacity (362 mA h g-1 at 0.1 A g-1 after 100 cycles) with long-term stability (95.9% capacity retention after 1000 cycles) and shows superior reaction kinetics with high-rate K-storage. Energy level analysis and DFT calculations illustrate heterostructure facilitates the adsorption of K+ and interfacial electron transfer. The K+ storage mechanism is revealed by ex situ XRD and EIS analyses. This work opens a novel avenue in designing high-performance heterostructured anode materials with ingenious structure for PIBs.

Weakly Solvating Ether-Based Electrolyte Constructing Anion-Derived Solid Electrolyte Interface in Graphite Anode toward High-Stable Potassium-Ion Batteries.

Low-cost graphite has emerged as the most promising anode material for potassium-ion batteries (PIBs). Constructing the inorganic-rich solid electrolyte interface (SEI) on the surface of graphite anode is crucial for achieving superior electrochemical performance of PIBs. However, the compositions of SEI formed by conventional strongly solvating electrolytes are mainly organic, leading to the SEI structure being thick and causing the co-intercalation behavior of ions with the solvent. Herein, a weakly solvating electrolyte is applied to weaken the cation-solvent interaction and alter the cation solvation sheath structures, conducing to the inorganic composition derived from anions also participating in the formation of SEI, together with forming a uniformly shaped SEI with superior mechanical properties, and thus improving the overall performance of PIBs. The electrolyte solvation structure rich in aggregated ion pairs (AGGs) (69%) enables remarkable potassium-ion intercalation behavior at the graphite anode (reversible capacity of 269 mAh g-1) and highly stable plating/stripping of potassium metal anode (96.5%). As a practical device application, the assembled potassium-ion full-battery (PTCDA//Graphite) displays superior cycle stability. The optimizing strategy of cation solvation sheath structures offers a promising approach for developing high-performance electrolytes and beyond.

A 3.2 V Binary Layered Oxide Cathode for Potassium-Ion Batteries.

Potassium-ion batteries (KIBs) can offer high energy density, cyclability, and operational safety while being economical due to the natural abundance of potassium. Utilizing graphite as an anode, suitable cathodes can realize full cells. Searching for potential cathodes, this work introduces P3-type K0.5Ni1/3Mn2/3O2 layered oxide as a potential candidate synthesized by a simple solid-state method. The material works as a 3.2 V cathode combining Ni redox at high voltage and Mn redox at low voltage and exhibits highly reversible K+ ion (de)insertion at ambient and elevated (40-50 °C) temperatures. First-principles calculations suggest the ground state in-plane Mn-Ni ordering in the MO2 sheets is strongly correlated to the K-content in the framework, leading to an interwoven and alternative row ordering of Ni-Mn in K0.5Ni1/3Mn2/3O2. Postmortem and electrochemical titration reveal the occurrence of a solid solution mechanism during K+ (de)insertion. The findings suggest that the Ni addition can effectively tune the electronic and structural properties of the cathode, leading to improved electrochemical performance. This work provides new insights in the quest to develop potential low-cost Co-free KIB cathodes for practical applications in stationary energy storage.

Thermal Induced Conversion of CoFe Prussian Blue Analogs Nanocubes Wrapped by Doped Carbon Network Exhibiting Fast and Stable Potassium Ion Storage as Anode.

Prussian blue analogs (PBAs) show great promise as anode materials for potassium-ion batteries (PIBs) due to their high specific capacity. However, PBAs still suffer from the drawbacks of low electronic conductivity and poor structural stability, leading to inadequate rate and cyclic performance. To address these limitations, CoFe PBA nanocubes wrapped with N/S doped carbon network (CoFe PBA@NSC) as anode for PIBs is designed by using thermal-induced in situ conversion strategy. As expected, the structural advantages of nanosized PBA cubes, such as abundant interfaces and large surface area, enable the CoFe PBA@NSC electrode to demonstrate superior rate properties (557 and 131 mAh g-1 at 0.05 and 10 A g-1) and low capacity degradation (0.093% per cycle over 1000 cycles at 0.5 A g-1). Furthermore, several ex situ characterizations revealed the K-ion storage mechanism. Fe+ and Co0 are generated during potassicization, followed by a completely reversible chemical state of iron while some cobalt monomers remained during depotassication. Additionally, the as-built potassium-ion hybrid capacitor based on CoFe PBA@NSC anode exhibits a high energy density of 118 Wh kg-1. This work presents an alternative but promising synthesis route for Prussian blue analogs, which is significant for the advancement of PIBs and other related energy storage devices.

A High-Entropy Prussian Blue Analog for Aqueous Potassium-Ion Batteries.

Aqueous potassium-ion batteries (AKIBs) are considered promising electrochemical energy storage systems owing to their high safety and cost-effectiveness. However, the structural degradation resulting from the repeated accommodation of large K-ions and the dissolution of active electrode materials in highly dielectric aqueous electrolytes often lead to unsatisfactory electrochemical performance. This study introduces a high-entropy Prussian blue analog (HEPBA) cathode material for AKIBs, demonstrating significantly enhanced structural stability and reduced dissolution. The HEPBA exhibits a highly reversible specific capacity of 102.4 mAh g-1, with 84.4% capacity retention after undergoing 3448 cycles over a duration of 270 days. Mechanistic insights derived from comprehensive experimental investigations, supported by theoretical calculations, reveal that the HEPBA features a robust structure resistant to dissolution, a solid-solution reaction pathway with negligible volume variation during charge-discharge, and efficient ion transport kinetics characterized by a reduced band gap and a low energy barrier. This study represents a measurable step forward in the development of long-lasting electrode materials for aqueous AKIBs.

Tailoring Stress-Relieved Structure for SnSe Toward High Performance Potassium Ion Batteries.

Metal chalcogenides as an ideal family of anode materials demonstrate a high theoretical specific capacity for potassium ion batteries (PIBs), but the huge volume variance and poor cyclic stability hinder their practical applications. In this study, a design of a stress self-adaptive structure with ultrafine SnSe nanoparticles embedded in carbon nanofiber (SnSe@CNF) via the electrospinning technology is presented. Such an architecture delivers a record high specific capacity (272 mAh g-1 at 50 mA g-1) and high-rate performance (125 mAh g-1 at 1 A g-1) as a PIB anode. It is decoded that the fundamental understanding for this great performance is that the ultrafine SnSe particles enhance the full utilization of the active material and achieve stress relief as the stored strain energy from cycling is insufficient to drive crack propagation and thus alleviates the intrinsic chemo-mechanical degradation of metal chalcogenides.