On-Chip Thermoelectric Devices Based on Standard Silicon Processing.

The strong reduction of thermal conductivity with respect to bulk silicon makes nanostructured silicon one of the best materials for highly efficient direct conversion of heat into electrical power and vice-versa. The widespread technologies for the integration of silicon devices can be used to define on-chip micro thermoelectric generators (scavengers); similar structures could also be used for precise and well-localized cooling through the reverse process of heat pumping. However, the road to the fabrication of integrated thermal energy scavengers or cooler, based on silicon, is still very long. In this work, the design and the fabrication process of on-chip thermoelectric devices based on a large number of interconnected monocrystalline silicon nanobeams, very tall (>1 µm) and thin (less than 200 nanometers), arranged in large areas combs is shown. The small width of the nanobeams gives a reduced thermal conductivity, and the height perpendicular to the substrate allows the definition of a highly dense collection of nanostructures. The total cross-section is far broader than that of other nanostructures, a characteristic that guarantees both mechanical stability and larger deliverable power per unit area.

Anode-Free Aqueous Aluminum Ion Batteries.

Aqueous aluminum ion batteries (AAIBs) possess the advantages of high safety, cost-effectiveness, eco-friendliness and high theoretical capacity. However, the Al2O3 film on the Al anode surface, a natural physical barrier to the plating of hydrated aluminum ions, is a key factor in the decomposition of the aqueous electrolyte and the severe hydrogen precipitation reaction. To circumvent the obnoxious Al anode, a proof-of-concept of an anode-free AAIB is first proposed, in which Al2TiO5, as a cathode pre-aluminum additive (Al source), can replenish Al loss by over cycling. The Al-Cu alloy layer, formed by plating Al on the Cu foil surface during the charge process, possesses a reversible electrochemical property and is paired with a polyaniline (cathode) to stimulate the battery to exhibit high initial discharge capacity (175 mAh g-1), high power density (≈410 Wh L-1) and ultra-long cycle life (4000 cycles) with the capacity retention of ≈60% after 1000 cycles. This work will act as a primer to ignite the enormous prospective researches on the anode-free aqueous Al ion batteries.

Pseudocapacitive Storage in Molybdenum Oxynitride Nanostructures Reactively Sputtered on Stainless-Steel Mesh Towards an All-Solid-State Flexible Supercapacitor.

Exploiting pseudocapacitance in rationally engineered nanomaterials offers greater energy storage capacities at faster rates. The present research reports a high-performance Molybdenum Oxynitride (MoON) nanostructured material deposited directly over stainless-steel mesh (SSM) via reactive magnetron sputtering technique for flexible symmetric supercapacitor (FSSC) application. The MoON/SSM flexible electrode manifests remarkable Na+-ion pseudocapacitive kinetics, delivering exceptional ≈881.83 F g-1 capacitance, thanks to the synergistically coupled interfaces and junctions between nanostructures of Mo2N, MoO2, and MoO3 co-existing phases, resulting in enhanced specific surface area, increased electroactive sites, improved ionic and electronic conductivity. Employing 3D Bode plots, b-value, and Dunn's analysis, a comprehensive insight into the charge-storage mechanism has been presented, revealing the superiority of surface-controlled capacitive and pseudocapacitive kinetics. Utilizing PVA-Na2SO4 gel electrolyte, the assembled all-solid-state FSSC (MoON/SSM||MoON/SSM) exhibits impressive cell capacitance of 30.7 mF cm-2 (438.59 F g-1) at 0.125 mA cm-2. Moreover, the FSSC device outputs a superior energy density of 4.26 µWh cm-2 (60.92 Wh kg-1) and high power density of 2.5 mW cm-2 (35.71 kW kg-1). The device manifests remarkable flexibility and excellent electrochemical cyclability of ≈91.94% over 10,000 continuous charge-discharge cycles. These intriguing pseudocapacitive performances combined with lightweight, cost-effective, industry-feasible, and environmentally sustainable attributes make the present MoON-based FSSC a potential candidate for energy-storage applications in flexible electronics.

Synergistic Anisotropic Network and Hierarchical Electrodes Endow Cost-Effective N-Type Quasi-Solid State Thermocell with Boosted Electricity Production.

Quasi-solid state thermocells hold immense potential for harnessing untapped low-grade heat and converting it into electricity via the thermogalvanic effect. However, integrated N-type thermocells face limitations in thermoelectric performance due to the rare N-type systems and the poor electroactivity of the electrode interfaces. Herein, a low-cost, high-power N-type quasi-solid state thermocell employing PVA-CuSO4-Cu is presented, which is enhanced by synergistic engineering of an anisotropic network and hierarchical electrodes. The anisotropic polymer network, combined with the salting-out effect, yields impressive mechanical properties that exceed those of most N-type quasi-solid state thermocells. Furthermore, through the synergistic construction of aligned ion transport pathways in the anisotropic thermocell and optimization of the electroactive interface between electrodes and thermocell, a remarkable enhancement of 1500% in output power density (compared to pristine thermocell), reaching 0.51 mW m-2 at ∆T = 5 °C. It is believed that this cost-effective N-type thermocell, enhanced by the synergistic anisotropic network and hierarchical electrodes, paves the way for effective energy harvesting from diverse heat sources and promises to reshape sustainable energy utilization.

Phosphorus-Doped Nickel Oxide Micro-Supercapacitor: Unleashing the Power of Energy Storage for Miniaturized Electronic Devices.

For an uninterrupted self-powered network, the requirement of miniaturized energy storage device is of utmost importance. This study explores the potential utilization of phosphorus-doped nickel oxide (P-NiO) to design highly efficient durable micro-supercapacitors. The introduction of P as a dopant serves to enhance the electrical conductivity of bare NiO, leading to 11-fold augmentation in volumetric capacitance to 841.92 Fcm-3 followed by significant enhancement of energy and power density from 6.71 to 42.096 mWhcm-3 and 0.47 to 1.046 Wcm-3, respectively. Theoretical calculations used to determine the adsorption energy of OH- ions, revealing higher in case of bare NiO (1.52 eV) as compared to phosphorus-doped NiO (0.64 eV) leading to high electrochemical energy storage performance. The as-designed micro-supercapacitor (MSC) device demonstrates a facile integration with the photovoltaic system for renewable energy storage and smooth transfer to external loads for enlightening the blue LED for ≈1 min. The choice of P-NiO/Ni not only contributes to cost reduction but also ensures minimal lattice mismatch at the interface facilitating high durability up to 15 K cycles along with capacitive retention of ≈100% and coulombic efficiency of 93%. Thus, the heterostructure unveils the possibilities of exploring miniaturized energy storage devices for portable electronics.

Enhancing Electrode Performance through Triple Distribution Modulation of Active Material, Conductive Agent, and Porosity.

The increasing demand for large-scale energy storage propels the development of lithium-ion batteries with high energy and high power density. Low tortuosity electrodes with aligned straight channels have proved to be effective in building such batteries. However, manufacturing such low tortuosity electrodes in large scale remains extremely challenging. In contrast, high-performance electrodes with customized gradients of materials and porosity are possible to be made by industrial roll-to-roll coating process. Yet, the desired design of gradients combining materials and porosity is unclear for high-performance gradient electrodes. Here, triple gradient LiFePO4 electrodes (TGE) are fabricated featuring distribution modulation of active material, conductive agent, and porosity by combining suction filtration with the phase inversion method. The effects and mechanism of active material, conductive agent, and porosity distribution on electrode performance are analyzed by experiments. It is found that the electrode with a gradual increase of active material content from current collector to separator coupled with the distribution of conductive agent and porosity in the opposite direction, demonstrates the best rate capability, the fastest electrochemical reaction kinetics, and the highest utilization of active material. This work provides valuable insights into the design of gradient electrodes with high performance and high potential in application.

Unleashing the Power of Osmotic Energy: Metal Hydroxide-Organic Framework Membranes for Efficient Conversion.

Osmotic energy, as a renewable clean energy with huge energy density and stable yield, has received widespread attention over the past decades. Reverse electrodialysis (RED) based on ion-exchange membranes is an important method of obtaining osmotic energy from salinity gradients. The preparation of ion-exchange membranes with both high ion selectivity and ion permeability is in constant exploration. In this work, metal hydroxide-organic framework (MHOF) membranes are successfully prepared onto porous anodic aluminum oxide (AAO) membranes by a facile hydrothermal method to form Ni2(OH)2@AAO composite membranes, used for osmotic energy conversion. The surface is negatively charged with cation selectivity, and the asymmetric structure and extreme hydrophilicity enhance the ionic flux for effective capture of osmotic energy. The maximum output power density of 5.65 W m-2 at a 50-fold KCl concentration gradient is achieved, which exceeds the commercial benchmark of 5 W m-2. Meanwhile, the composite membrane can also show good performance in different electrolyte solutions and acid-base environments. This work provides a new avenue for the construction and application of MHOF membranes in efficient osmotic energy conversion.

Advanced Hollow Cubic FeCo-N-C Cathode Electrocatalyst for Ultrahigh-Power Aluminum-Air Battery.

The exploration of electrocatalysts toward oxygen reduction reaction (ORR) is pivotal in the development of diverse batteries and fuel cells that rely on ORR. Here, a FeCo-N-C electrocatalyst (FeCo-HNC) featuring with atomically dispersed dual metal sites (Fe-Co) and hollow cubic structure is reported, which exhibits high activity for electrocatalysis of ORR in alkaline electrolyte, as evidenced by a half-wave potential of 0.907 V, outperforming that of the commercial Pt/C catalyst. The practicality of such FeCo-HNC catalyst is demonstrated by integrating it as the cathode catalyst into an alkaline aluminum-air battery (AAB) paring with an aluminum plate serving as the anode. This AAB demonstrates an unprecedented power density of 804 mW cm-2 in ambient air and an impressive 1200 mW cm-2 in an oxygen-rich environment. These results not only establish a new benchmark but also set a groundbreaking record for the highest power density among all AABs reported to date. Moreover, they stand shoulder to shoulder with state-of-the-art H2-O2 fuel cells. This AAB exhibits robust stability with continuous operation for an impressive 200 h. This groundbreaking achievement underscores the immense potential and forward strides that the present work brings to the field.

Ultrastrong and Reusable Solar‒Thermal‒Electric Generators by Economical Starch Vitrimers.

In frigid regions, it is imperative to possess functionality materials that are ultrastrong, reusable, and economical, providing self-generated heat and electricity. One promising solution is a solar‒thermal‒electric (STE) generator, composed of solar‒thermal conversion phase change composites (PCCs) and temperature-difference power-generation-sheets. However, the existing PCCs face challenges with conflicting requirements for solar‒thermal conversion efficiency and mechanical robustness, mainly due to monotonous functionalized aerogel framework. Herein, a novel starch vitrimer aerogel is proposed that incorporates orientational distributed carboxylated carbon nanotubes (CCNT) to create PCC. This innovative design integrates large through-holes, mechanical robustness, and superior solar‒thermal conversion. Remarkably, PCC with only 0.8 wt.% CCNT loading achieves 85.8 MPa compressive strength, 102.4 °C at 200 mW cm-2 irradiation with an impressive 92.9% solar-thermal conversion efficiency. Noteworthy, the STE generator assembled with PCC harvests 99.1 W m-2 output power density, surpassing other reported STE generators. Strikingly, even under harsh conditions of -10 °C and 10 mW cm‒2 irradiation, the STE generator maintains 20 °C for PCC with 325 mV output voltage and 45 mA current, showcasing enhanced electricity generation in colder environments. This study introduces a groundbreaking STE generator, paving the way for self-sufficient heat and electricity supply in cold regions.

Emerging Vanadium-Doped Cobalt Chloride Carbonate Hydroxide for Flexible Electrochromic Micro-Supercapacitor: Charged-State Prediction from RGB Input by ANN Model.

Multifunctional devices integrated with electrochromic and supercapacitance properties are fascinating because of their extensive usage in modern electronic applications. In this work, vanadium-doped cobalt chloride carbonate hydroxide hydrate nanostructures (V-C3H NSs) are successfully synthesized and show unique electrochromic and supercapacitor properties. The V-C3H NSs material exhibits a high specific capacitance of 1219.9 F g-1 at 1 mV s-1 with a capacitance retention of 100% over 30 000 CV cycles. The electrochromic performance of the V-C3H NSs material is confirmed through in situ spectroelectrochemical measurements, where the switching time, coloration efficiency (CE), and optical modulation (∆T) are found to be 15.7 and 18.8 s, 65.85 cm2 C-1 and 69%, respectively. A coupled multilayer artificial neural network (ANN) model is framed to predict potential and current from red (R), green (G), and blue (B) color values. The optimized V-C3H NSs are used as the active materials in the fabrication of flexible/wearable electrochromic micro-supercapacitor devices (FEMSDs) through a cost-effective mask-assisted vacuum filtration method. The fabricated FEMSD exhibits an areal capacitance of 47.15 mF cm-2 at 1 mV s-1 and offers a maximum areal energy and power density of 104.78 Wh cm-2 and 0.04 mW cm-2, respectively. This material's interesting energy storage and electrochromic properties are promising in multifunctional electrochromic energy storage applications.

Resent Development of Binder-Free Electrodes of Transition Metal Oxides and Nanohybrids for High Performance Supercapacitors - A Review.

The entire world is aware of the serious issue of global warming and therefore utilizing renewable energy sources is the most encouraging steps toward solving energy crises, and as a result, energy storage solutions are necessary. The supercapacitors (SCs) have a high-power density and a long cycle life, they are promising as an electrochemical conversion and storage device. In order to achieve high electrochemical performance, electrode fabrication must be implemented properly. Electrochemically inactive and insulating binders are utilized in the conventional slurry coating method of making electrodes to provide adhesion between the electrode material and the substrate. This results in an undesirable "dead mass," which lowers the overall device performance. In this review, we focused on binder-free SCs electrodes based on transition metal oxides and composites. With the best examples providing the critical aspects, the benefits of binder-free electrodes over slurry-coated electrodes are addressed. Additionally, different metal-oxides used in the fabrication of binder-free electrodes are assessed, taking into account the various synthesis methods, giving an overall picture of the work done for binder-free electrodes. The future outlook is provided along with the benefits and drawbacks of binder-free electrodes based on transition metal oxides.

Recent Development of Anion Exchange Membrane Fuel Cells and Performance Optimization Strategies: A Review.

Anion exchange membrane fuel cells (AEMFCs) are the most promising low-temperature fuel cells and have received extensive attention. Compared to PEMFCs, the cost per unit of power can be significantly reduced for AEMFCs because, in theory, they allow the usage of non-precious metal catalysts and low-cost cell components. Owing to the development of advanced materials and performance improvement strategies, AEMFCs have achieved new records in both initial performance and durability. However, the high performance currently achieved is contingent on certain conditions, e. g., high Pt loading, large gas flowrates, and operation in pure O2 , which are far from practical applications. Therefore, the transition to commercially relevant performance and durability is the next goal of AEMFCs. This paper reviews the performance data of H2 -fueled AEMFCs since 2010 and summarizes possible performance optimization schemes, which can provide useful insights for developing next-generation AEMFCs.

Control of motor output during steady submaximal contractions is modulated by contraction history.

The purpose of the study was to investigate the influence of contraction history on force steadiness and the associated EMG activity during submaximal isometric contractions performed with the dorsiflexor muscles. The key feature of the protocol was a triangular ramp contraction performed in the middle of a steady contraction at a lower target force. The target force during the ramp contraction was 20% MVC greater than that during the steady contraction. Thirty-seven healthy individuals (21 men and 16 women) performed the submaximal tasks with the ankle dorsiflexors. Electromyography (EMG) signals were recorded from tibialis anterior with a pair of surface electrodes. The coefficient of variation for force was significantly greater during the second steady contraction compared with the first one at each of the seven target forces (p < 0.015; d = 0.38-0.92). Although the average applied force during the steady contractions before and after the triangular contraction was the same (p = 0.563), the mean EMG amplitude for the steady contractions performed after the triangular contraction was significantly greater at each of the seven target forces (p < 0.0001; d = 0.44-0.68). Also, there were significant differences in mean EMG frequency between the steady contractions performed before and after the triangular contraction (p < 0.01; d = 0.13-0.82), except at 10 and 20% MVC force. The greater force fluctuations during a steady submaximal contraction after an intervening triangular contraction indicate a change in the discharge characteristics of the involved motor units.

Fabrication and characterization of Sb2O3-MoS2nanocomposites for high performance supercapacitor applications.

Binary nanocomposite-based electrodes have been studied extensively in recent times owing to their multiple oxidation states, excellent physico-chemical features, and combined morphology, which are suitable for increasing the electrochemical performance of supercapacitors. The present work deals with Sb2O3-MoS2nanocomposites electrode for supercapacitor applications. The x-ray diffraction (XRD), Raman, scanning electron microscope (SEM), energy dispersive x-ray (EDX), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and x-ray photoelectron spectroscopy (XPS) characterizations have been studied to analyze the phase formation, vibrational modes, morphology, elemental composition and binding energies of the prepared Sb2O3-MoS2nanocomposites electrode material, as well as their electrochemical measurements such as cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) have been analyzed. The developed Sb2O3-MoS2nanocomposites electrode provides a high specific capacitance of 454.3 F g-1at the current density of 1 A g-1. Further, the hybrid supercapacitor device has been constructed which shows 104.04 F g-1of specific capacitance at 2 A g-1and manifests a good energy density of 24.42 Wh kg-1at a power density of 1299.89 W kg-1. Additionally, the hybrid device Sb2O3-MoS2//AC exhibits a good capacitive retention of 90.6% and a coulombic efficiency of 100.45% at 10 A g-1over 8000 cycles.

Selective neural inhibition via photobiomodulation alleviates behavioral hypersensitivity associated with small sensory fiber activation.

OBJECTIVE: Photobiomodulation at higher irradiances has great potential as a pain-alleviating method that selectively inhibits small diameter nerve fibers and corresponding sensory experiences, such as nociception and heat sensation. The longevity and magnitude of these effects as a function of laser irradiation parameters at the nerve was explored. METHODS: In a rodent chronic pain model (spared nerve injury-SNI), light was applied directly at the sural nerve with four delivery schemes: two irradiance levels (7.64 and 2.55 W/cm2 ) for two durations each, corresponding to either 4.8 or 14.4 J total energy, and the effect on sensory hypersensitivities was evaluated. RESULTS: At emitter irradiances of 7.64 W/cm2 (for 240 s), 2.55 W/cm2 (for 720 s), and 7.64 W/cm2 (for 80 s) the heat hypersensitivity was relieved the day following photobiomodulation (PBM) treatment by 37 ± 8.1% (statistically significant, p < 0.001), 26% ± 6% (p = 0.072), and 28 ± 6.1% (statistically significant, p = 0.032), respectively, and all three treatments reduced the hypersensitivity over the course of the experiment (13 days) at a statistically significant level (mixed-design analysis of variance, p < 0.05). The increases in tissue temperature (5.3 ± 1.0 and 1.3 ± 0.4°C from 33.3°C for the higher and lower power densities, respectively) at the neural target were well below those typically associated with permanent action potential disruption. CONCLUSIONS: The data from this study support the use of direct PBM on nerves of interest to reduce sensitivities associated with small-diameter fiber activity.

A Statistical and AI Analysis of the Frequency Spectrum in the Measurement of the Center of Pressure Track in the Seated Position in Healthy Subjects and Subjects with Low Back Pain.

Measuring postural control in an upright standing position is the standard method. However, this diagnostic method has floor or ceiling effects and its implementation is only possible to a limited extent. Assessing postural control directly on the trunk in a sitting position and consideration of the results in the spectrum in conjunction with an AI-supported evaluation could represent an alternative diagnostic method quantifying neuromuscular control. In a prospective cross-sectional study, 188 subjects aged between 18 and 60 years were recruited and divided into two groups: "LowBackPain" vs. "Healthy". Subsequently, measurements of postural control in a seated position were carried out for 60 s using a modified balance board. A spectrum per trail was calculated using the measured CoP tracks in the range from 0.01 to 10 Hz. Various algorithms for data classification and prediction of these classes were tested for the parameter combination with the highest proven static influence on the parameter pain. The best results were found in a frequency spectrum of 0.001 Hz and greater than 1 Hz. After transforming the track from the time domain to the image domain for representation as power density, the influence of pain was highly significant (effect size 0.9). The link between pain and gender (p = 0.015) and pain and height (p = 0.012) also demonstrated significant results. The assessment of postural control in a seated position allows differentiation between "LowBackPain" and "Healthy" subjects. Using the AI algorithm of neural networks, the data set can be correctly differentiated into "LowBackPain" and "Healthy" with a probability of 81%.

Acoustic Features of the Impact of Laser Pulses on Metal-Ceramic Carbide Alloy Surface.

Technologies associated with using concentrated energy flows are increasingly used in industry due to the need to manufacture products made of hard alloys and other difficult-to-process materials. This work is devoted to expanding knowledge about the processes accompanying the impact of laser pulses on material surfaces. The features of these processes are reflected in the acoustic emission signals, the parameters of which were used as a tool for understanding the accompanying phenomena. The influence of plasma formations above the material surface on self-oscillatory phenomena and the self-regulation process that affects pulse productivity were examined. The stability of plasma formation over time, its influence on the pulse performance, and changes in the heat flux power density were considered. Experimental data show the change in the power density transmitted by laser pulses to the surface when the focal plane is shifted. Experiments on the impact of laser pulses of different powers and durations on the surface of a hard alloy showed a relationship between the amplitude of acoustic emission and the pulse performance. This work shows the data content of acoustic emission signals and the possibility of expanding the research of concentrated energy flow technologies.

Bioremediation of hydrocarbon by co-culturing of biosurfactant-producing bacteria in microbial fuel cell with Fe2O3-modified anode.

The most common type of environmental contamination is petroleum hydrocarbons. Sustainable and environmentally friendly treatment strategies must be explored in light of the increasing challenges of toxic and critical wastewater contamination. This paper deals with the bacteria-producing biosurfactant and their employment in the bioremediation of hydrocarbon-containing waste through a microbial fuel cell (MFC) with Pseudomonas aeruginosa (exoelectrogen) as co-culture for simultaneous power generation. Staphylococcus aureus is isolated from hydrocarbon-contaminated soil and is effective in hydrocarbon degradation by utilizing hydrocarbon (engine oil) as the only carbon source. The biosurfactant was purified using silica-gel column chromatography and characterised through FTIR and GCMS, which showed its glycolipid nature. The isolated strains are later employed in the MFCs for the degradation of the hydrocarbon and power production simultaneously which has shown a power density of 6.4 W/m3 with a 93% engine oil degradation rate. A biogenic Fe2O3 nanoparticle (NP) was synthesized using Bambusa arundinacea shoot extract for anode modification. It increased the power output by 37% and gave the power density of 10.2 W/m3. Thus, simultaneous hydrocarbon bioremediation from oil-contamination and energy recovery can be achieved effectively in MFC with modified anode.

Sustainable power production from petrochemical industrial effluent using dual chambered microbial fuel cell.

Dual chambered microbial fuel cell (DMFC) is an advanced and effective treatment technology in wastewater treatment. The current work has made an effort to treat petrochemical industrial wastewater (PWW) as a DMFC substrate for power generation and organic substance removal. Investigating the impact of organic load (OL) on organic reduction and electricity generation is the main objective of this study. At the OL of 1.5 g COD/L, the highest total chemical oxygen demand (TCOD) removal efficiency of 88%, soluble oxygen demand (SCOD) removal efficiency of 80% and total suspended solids (TSS) removal efficiency of 71% were seen, respectively. In the same optimum condition of 1.5 g COD/L, the highest current and power density of about 270 mW/m2 and 376 mA/m2 were also observed. According to the results of this study, using high-strength organic wastewater in DMFC can assist in addressing the issue of the petrochemical industries and minimize the energy demand.

Fabrication of a Molybdenum Dioxide/Multi-Walled Carbon Nanotubes Nanocomposite as an Anodic Modification Material for High-Performance Microbial Fuel Cells.

A nanocomposite of multi-walled carbon nanotubes (MWCNTs) decorated with molybdenum dioxide (MoO2) nanoparticles is fabricated through the reduction of phosphomolybdic acid hydrate on functionalized MWCNTs in a hydrogen-argon (10%) atmosphere in a tube furnace. The MoO2/MWCNTs composite is proposed as an anodic modification material for microbial fuel cells (MFCs). MWCNTs have outstanding physical and chemical peculiarities, with functionalized MWCNTs having substantially large electroactive areas. In addition, combined with the exceptional properties of MoO2 nanoparticles, the synergistic advantages of functionalized MWCNTs and MoO2 nanoparticles give a MoO2/MWCNTs anode a large electroactive area, excellent electronic conductivity, enhanced extracellular electron transfer capacity, and improved nutrient transfer capability. Finally, the power harvesting of an MFC with the MoO2/MWCNTs anode is improved, with the MFC showing long-term repeatability of voltage and current density outputs. This exploratory research advances the fundamental application of anodic modification to MFCs, simultaneously providing valuable guidance for the use of carbon-based transition metal oxide nanomaterials in high-performance MFCs.