ExosomePurity: tumour purity deconvolution in serum exosomes based on miRNA signatures.

Exosomes cargo tumour-characterized biomolecules secreted from cancer cells and play a pivotal role in tumorigenesis and cancer progression, thus providing their potential for non-invasive cancer monitoring. Since cancer cell-derived exosomes are often mixed with those from healthy cells in liquid biopsy of tumour patients, accurately measuring the purity of tumour cell-derived exosomes is not only critical for the early detection but also essential for unbiased identification of diagnosis biomarkers. Here, we propose 'ExosomePurity', a tumour purity deconvolution model to estimate tumour purity in serum exosomes of cancer patients based on microribonucleic acid (miRNA)-Seq data. We first identify the differently expressed miRNAs as signature to distinguish cancer cell- from healthy cell-derived exosomes. Then, the deconvolution model was developed to estimate the proportions of cancer exosomes and normal exosomes in serum. The purity predicted by the model shows high correlation with actual purity in simulated data and actual data. Moreover, the model is robust under the different levels of noise background. The tumour purity was also used to correct differential expressed gene analysis. ExosomePurity empowers the research community to study non-invasive early diagnosis and to track cancer progression in cancers more efficiently. It is implemented in R and is freely available from GitHub (https://github.com/WangHYLab/ExosomePurity).

Solidophobic Surface for Electrochemical Extraction of High-Valued Mg(OH)2 Coupled with H2 Production from Seawater.

A significant challenge in direct seawater electrolysis is the rapid deactivation of the cathode due to the large scaling of Mg(OH)2. Herein, we synthesized a Pt-coated highly disordered NiCu alloy (Pt-NiCu alloy) electrode with superior solidophobic behavior, enabling stable hydrogen generation (100 mA cm-2, >1000 h durability) and simultaneous production of Mg(OH)2 (>99.0% purity) in electrolyte enriched with Mg2+ and Ca2+. The unconventional solidophobic property primarily stems from the high surface energy of the NiCu alloy substrate, which facilitates the adsorption of surface water and thereby compels the bulk formation of Mg(OH)2 via homogeneous nucleation. The discovery of this solidophobic electrode will revolutionarily simplify the existing techniques for seawater electrolysis and increase the economic viability for seawater electrolysis.

Enhancing Single Photon Emission Purity via Design of van der Waals Heterostructures.

Quantum emitters are essential components of quantum photonic circuitry envisioned beyond the current optoelectronic state-of-the-art. Two dimensional materials are attractive hosts for such emitters. However, the high single photon purity required is rarely realized due to the presence of spectrally degenerate classical light originating from defects. Here, we show that design of a van der Waals heterostructure effectively eliminates this spurious light, resulting in purities suitable for a variety of quantum technological applications. Single photon purity from emitters in monolayer WSe2 increases from 60% to 92% by incorporating this monolayer in a simple graphite/WSe2 heterostructure. Fast interlayer charge transfer quenches a broad photoluminescence background by preventing radiative recombination through long-lived defect bound exciton states. This approach is generally applicable to other 2D emitter materials, circumvents issues of material quality, and offers a path forward to achieve the ultrahigh single photon purities ultimately required for photon-based quantum technologies.

Sterically Hindered Tetradentate [Pt(O

Described here are sterically hindered tetradentate [Pt(O^N^C^N)] emitters (Pt-1, Pt-2, and Pt-3) developed for stable and high-performance green phosphorescent organic light-emitting diodes (OLEDs). These Pt(II) emitters exhibit strong saturated green phosphorescence (λmax = 517-531 nm) in toluene and mCP thin films with emission quantum yields as high as 0.97, radiative rate constants (kr) as high as 4.4-5.3 × 105 s-1 and reduced excimer emission, and with a preferential horizontally oriented transition dipole ratio of up to 84%. Theoretical calculations show that p-(hetero)arene substituents at the periphery of the ligand scaffolds in Pt-1, Pt-2, and Pt-3 can i) enhance the spin-orbit coupling (SOC) between the lower singlet excited states and the T1 state, and S0→Sn (n = 1 or 2) transition dipole moment, and ii) introducing additional SOC activity and the bright 1ILCT[π(carbazole)→π*(N^C^N)] excited state (Pt-2 and Pt-3), which are the main contributors to the increased kr values. Utilizing these tetradentate Pt(II) emitters, green phosphorescent OLEDs are fabricated with narrow-band electroluminescence (FWHM down to 36 nm), high external quantum efficiency, current efficiency up to 27.6% and 98.7 cd A-1, and an unprecedented device lifetime (LT95) of up to 9270 h at 1000 cd m-2 under laboratory conditions.

Structure Engineering of Acridine Donor to Optimize Color Purity of Blue Thermally Activated Delayed Fluorescence Emitters.

9,9-Dimethyl-9,10-dihydroacridine (DMAC) is one of the most widely used electron donor for constructing high-performance thermally activated delayed fluorescence (TADF) emitters. However, DMAC-based emitters often suffer from the imperfect color purity, particularly in blue emitters, due to its strong electron-donating capability. To modulate donor strength, 2,7-F-Ph-DMAC and 2,7-CF3-Ph-DMAC were designed by introducing the electron-withdrawing 2-fluorophenyl and 2-(trifluoromethyl)phenyl at the 2,7-positions of DMAC. These donors were used, in combination with 2,4,6-triphenyl-1,3,5-triazine (TRZ) acceptor, to develop novel TADF emitters 2,7-F-Ph-DMAC-TRZ and 2,7-CF3-Ph-DMAC-TRZ. Compared to the F- or CF3-free reference emitter, both two emitters showed hypsochromic effect in fluorescence and comparable photoluminescence quantum yields without sacrificing the reverse intersystem crossing rate constants. In particular, 2,7-CF3-Ph-DMAC-TRZ based OLED exhibited a blue shift by up to 39 nm and significantly improved Commission International de l'Éclairage (CIE) coordinates from (0.36, 0.55) to (0.22, 0.41), while the external quantum efficiency kept stable at about 22.5 %. This donor engineering strategy should be valid for improving the color purity of large amount of acridine based TADF emitters. It can be predicted that pure blue TADF emitters should be feasible if these F- or CF3-modifed acridine donors are combined with other weaker electron acceptors.

Crystal Chemistry and Photoluminescent Aspects of Bright Orange Light Emitting Sm3+- Activated Ba2BiV3O11 Nanomaterials for Advanced Illuminating Applications.

In the present system, Sm3+ activated Ba2BiV3O11 nanomaterial series radiating orange-red light was developed via an efficient approach of solution combustion method. The structural examinations using XRD analysis indicate that the sample is crystallized into the monoclinic phase with the P21/a (14) space group. The elemental composition and morphological conduct were studied via energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM) respectively. Also, the formation of nanoparticles was confirmed by transmission electron microscopy (TEM). Photoluminescent (PL) examinations reveal the orange-red emission from the developed nanocrystals via documenting the emission spectra, which reveals the peak at 606 nm due to the 4G5/2 → 6H7/2 transition. Further, the decay time, non-radiative rates, quantum efficiency, and band gap of the optimal sample were computed as 1.3263 ms, 219.5 s- 1, 70.88%, and 3.41 eV respectively. Finally, the chromatic parameters including color - coordinates (0.5565, 0.4426), 1975 K color correlated temperature (CCT), and color purity (85.58%) reflected their excellent luminous performance. The above-mentioned outcomes endorsed the relevancy of the developed nanomaterials as a propitious agent in the engineering of advanced illuminating optoelectronic appliances.

An innovative optimized protocol for high-quality genomic DNA extraction from recalcitrant Shea tree (Vitellaria paradoxa, C.F. Gaertn) plant and its suitability for downstream applications.

BACKGROUND: It is not always easy to find a universal protocol for the extraction of genomic DNA (gDNA) from plants. Extraction of gDNA from plants such as shea with a lot of polysaccharides in their leaves is done in two steps: a first step to remove the polysaccharides and a second step for the extraction of the gDNA. In this work, we designed a protocol for extracting high-quality gDNA from shea tree and demonstrate its suitability for downstream molecular applications. METHODS: Fifty milligrams of leaf and root tissues were used to test the efficiency of our protocol. The quantity of gDNA was measured with the NanoDrop spectrometer and the quality was checked on agarose gel. Its suitability for use in downstream applications was tested with restriction enzymes, SSRs and RAPD polymerase chain reactions and Sanger sequencing. RESULTS: The average yield of gDNA was 5.17; 3.96; 2.71 and 2.41 µg for dry leaves, dry roots, fresh leaves and fresh roots respectively per 100 mg of tissue. Variance analysis of the yield showed significant difference between all tissue types. Leaf gDNA quality was better compared to root gDNA at the absorbance ratio A260/280 and A260/230. The minimum amplifiable concentration of leaf gDNA was 1 pg/µl while root gDNA remained amplifiable at 10 pg/µl. Genomic DNA obtained was also suitable for sequencing. CONCLUSION: This protocol provides an efficient, convenient and cost effective DNA extraction method suitable for use in various vitellaria paradoxa genomic studies.

Surface molecularly imprinted polymers based on magnetic multi-walled carbon nanotubes for the highly selective purification of resveratrol from crude extracts of Vitis vinifera, Arachis hypogaea, and Polygonum cuspidatum.

In this work, surface molecularly imprinted polymers based on magnetic multi-walled carbon nanotubes were prepared for the specific recognition and adsorption of resveratrol. The functionalization of magnetic multi-walled carbon nanotubes and the synthesis process of surface molecularly imprinted polymers were optimized. Characterizations were performed to demonstrate the successful synthesis of the imprinted materials. The imprinted materials showed satisfactory adsorption capacity of resveratrol (45.73 ± 1.72 mg/g) and excellent selectivity (imprinting factor 2.89 ± 0.15). In addition, the imprinted materials were used as adsorbents in molecularly imprinted solid-phase extraction for the purification of resveratrol from crude extracts of some food and medicinal resources, achieving recoveries of 93.69%-95.53% with high purities of 88.37%-92.33%. Moreover, the purified products exhibited extremely strong free radical scavenging activity compared with crude extracts. Overall, this work provided a promising approach for the highly selective purification of resveratrol from natural resources, which would contribute to the application of this valuable compound in the food/nutraceutical fields.

A minimum specification dataset for liquid ocular endotamponades: recommendations by a European expert panel.

PURPOSE: To propose a minimum specification dataset to characterize liquid ocular endotamponades (OEs), namely silicone oil (SO), heavy SO (HSO), perfluorodecalin (PFD), and perfluoro-octane (PFO), in terms of physicochemical properties, purity and available evidence of safety, in line with ISO16672:2020. METHODS: An evidence-based consensus using the expert panel technique was conducted. Two facilitators led a committee of 11 European experts. Facilitators prepared a dataset for each compound including the list of specifications relevant for the safety, identified by the group members on the basis of expertise and a comprehensive literature review. Each item was ranked by each member using a 9-point scale from 1 "absolutely to not include" to 9 "absolutely to include" in two rounds followed by discussion. Only items reaching consensus (score ≥ 7 from ≥ 75% of members) were included in the final datasets. RESULTS: For all OEs, consensus was reached to include manufacturer, density, refractive index, chemical composition, dynamic viscosity, interfacial and surface tension, endotoxins, in vitro cytotoxicity assessment, and any evidence from ex vivo and/or in vivo tests for safety assessment. Additional specifications were added for SO (molecular weight distribution, content of oligosiloxanes with MW ≤ 1000 g/mol, spectral transmittance) and PFD/PFO (% of pure PFD/PFO in the final product, vapor pressure, chemical analyses performed for safety assessment). CONCLUSION: The proposed evidence-based minimum specification datasets for SO, HSO, PFD, and PFO have the potential to provide surgeons and health service purchasers with an easily available overview of the most relevant information for the safety assessment of OEs.

Genomic analysis of inbreeding level, kinship and breed relationships in Creole cattle from South America.

The conservation of animal genetic resources refers to measures taken to prevent the loss of genetic diversity in livestock populations, including the protection of breeds from extinction. Creole cattle populations have suffered a drastic reduction in recent decades owing to absorbent crosses or replacement with commercial breeds of European or Indian origin. Genetic characterization can serve as a source of information for conservation strategies to maintain genetic variation. The objective of this work was to evaluate the levels of inbreeding and kinship through the use of genomic information. A total of 903 DNAs from 13 cattle populations from Argentina, Bolivia and Uruguay were genotyped using an SNP panel of 48 K. Also, a dataset of 76 K SNPs from Peruvian Creole was included. Two inbreeding indices (FROH and Fhat2) and kinship relationships were calculated. In addition, effective population size (Ne), linkage disequilibrium, population composition and phylogenetic relationships were estimated. In Creole cattle, FROH ranged from 0.14 to 0.03, and Fhat2 was close to zero. The inferred Ne trends exhibited a decline toward the present for all populations, whereas Creole cattle presented a lower magnitude of Ne than foreign breeds. Cluster analysis clearly differentiated the taurine and Zebu components (K2) and showed that Bolivian Creole cattle presented Zebu gene introgression. Despite the population reduction, Creole populations did not present extreme values of consanguinity and kinship and maintain high levels of genetic diversity. The information obtained in this work may be useful for planning conservation programmes for these valuable local animal genetic resources.

Meat and morality: The moral foundation of purity, but not harm, predicts attitudes toward cultured meat.

Cultured meat (also referred to as cultivated, cell-based, or cell-cultured meat) is a novel food technology that is presented as a method of meat production without reliance on large-scale industrial farming. The pro-cultured meat narrative rests, in part, on a moral foundation: cultured meat is purported to alleviate the environmental and animal welfare harms associated with farmed meat. Despite this narrative, no research has examined which moral values underpin attitudes towards cultured meat. To examine this, we surveyed 1861 participants from the United States and Germany about their moral foundations and their attitudes towards cultured meat. In line with predictions, people who more strongly endorse moral values about purity (i.e., had higher scores on the purity subscale of the moral foundations scale) held more negative attitudes towards cultured meat. However, this relationship was much more consistent among participants from the United States than participants from Germany. Against predictions, attitudes towards cultured meat were not reliably associated with the extent to which people focus on harm as a moral foundation. The latter finding was particularly surprising in light of harm-reduction narratives around cultured meat. These findings demonstrate the need for a more nuanced discussion about, and understanding of, consumer concerns around cultured meat and the values that underpin them.

Reversed-Phase Medium-Pressure Liquid Chromatography Purification of Omega-3 Fatty Acid Ethyl Esters Using AQ-C18.

Omega-3 fatty acids are in high demand due to their efficacy in treating hypertriglyceridemia and preventing cardiovascular diseases. However, the growth of the industry is hampered by low purity and insufficient productivity. This study aims to develop an efficient RP-MPLC purification method for omega-3 fatty acid ethyl esters with high purity and capacity. The results indicate that the AQ-C18 featuring polar end-capped silanol groups outperformed C18 and others in retention time and impurity separation. By injecting pure fish oil esters with a volume equivalent to a 1.25% bed volume on an AQ-C18 MPLC column using a binary isocratic methanol-water (90:10, v:v) mobile phase at 30 mL/min, optimal omega-3 fatty acid ethyl esters were obtained, with the notable purity of 90.34% and a recovery rate of 74.30%. The total content of EPA and DHA produced increased from 67.91% to 85.27%, meeting the acceptance criteria of no less than 84% set by the 2020 edition of the Pharmacopoeia of the People's Republic of China. In contrast, RP-MPLC significantly enhanced the production efficiency per unit output compared to RP-HPLC. This study demonstrates a pioneering approach to producing omega-3 fatty acid ethyl esters with high purity and of greater quantity using AQ-C18 RP-MPLC, showing this method's significant potential for use in industrial-scale manufacturing.

A DNA Extraction Method for Nondestructive Testing and Evaluation of Cotton Seeds (Gossypium L.).

Kernels of cotton provide lint and linter for textiles, oil and protein for food and feed. Cotton seed is formed following fertilization between an ovule and a pollen grain. The seed coat is maternal in origin, whereas the embryo and attached cotyledonary leaves are hybrids of parental lines. The extraction of genomic DNA from an ungerminated whole, a portion or mixed seeds are prerequisite in genetic and genomic studies of cotton. As far as our knowledge, there is only one method of nondescriptive DNA extraction from ungerminated cotton seeds without affecting the seed germination capability, but it has technical difficulties and requires special equipment. Furthermore, the amount of DNA extracted using the published method is low and, therefore, it is only suitable for routine marker assisted selection studies. In this study, a DNA extraction protocol referred to as the CTAB-LiCl was developed for single whole cotton seed, a portion of cotton seed and bulked cotton seeds. This protocol uses a combination of CTAB and LiCl to lyse cells and deplete RNAs simultaneously. The CTAB-LiCl DNA extraction method was evaluated in ninety-six individuals of six different cotton cultivars along with two genetic standards of cotton, TM-1 (G. hirsutum L.), Pima 3-79 (G. barbadense L.), and several other plant species of different plant genera. Results revealed that this method produced high quality and amounts of DNA as confirmed by spectrophotometry, agarose gel, restriction enzyme digestion, polymerase chain reaction, and library production for next generation sequencing studies of whole genome bisulfite sequencing. It does not require the use of liquid nitrogen, RNase, proteinase K, or beta-mercaptoethanol and can be completed in approximately 2 h. Small tissues of the chalaza ends of ungerminated cotton seeds could be used to obtain high quality and quantity of DNA ranging from 14 to 28 µg without affecting the seeds' germination ability, allowing marker-assisted selection before planting and flowering.

Assessment of isolation strategies to remove caseins for high-quality milk-derived extracellular vesicles.

Increasing studies have highlighted the significance of milk-derived extracellular vesicles (MEVs) in mother-newborn integration, as well as their application as novel drug delivery systems and diagnostic biomarkers. However, conventional ultracentrifugation (UC) often results in the co-precipitation of casein micelles in MEV pellets. In this study, we compared methods with different principles to screen the optimal pretreatment in caseins removal, and found that isoelectric precipitation by hydrochloric acid (HA) could most effectively remove caseins in porcine milk. We further characterized MEV populations isolated by UC and HA/UC from diverse aspects, including particle methodology via nanoparticle tracking analysis (NTA) and transmission electron microscopy (TEM), RNA and protein contents, and purity analysis. Importantly, the proliferative and anti-inflammatory effects of MEVs were evaluated in vitro, showing the superiority of MEVs via HA/UC in functionality compared with UC. Our results suggest that HA pretreatment before ultracentrifugation could effectively remove caseins and other protein complexes, leading to MEVs via HA/UC with higher purity and more significant effects in vitro. This study provides valuable insights for the advancement of MEVs isolation techniques across different species and accurate function analysis of MEVs.

Exploring the role of neutral ligands in modulating the photoluminescence of samarium complexes with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione.

Four eight-coordinated luminescent samarium complexes of type [Sm(hfpd)3L2] and [Sm(hfpd)3L'] [where hfpd = 1,1,1,5,5,5-Hexafluoro-2,4-pentanedione L = tri-octyl-phosphine oxide (TOPO) and L' = 1,10-phenanthroline (phen), neocuproine (neoc) and bathocuproine (bathoc) were synthesized via a stoichiometrically controlled approach. This allows for precise control over the stoichiometry of the complexes, leading to reproducible properties. This investigation focuses on understanding the impact of secondary ligands on the luminescent properties of these complexes. Infrared (IR) spectra provided information about the molecular structures, whereas 1H and 13C nuclear magnetic resonance (NMR) spectra confirmed these structural details along with the coordination of ligands to trivalent Sm ion. The UV-vis spectra revealed the molar absorption coefficient and absorption bands associated with the hfpd ligand and photoluminescence (PL) spectroscopy demonstrated intense orange-red emission (648 nm relative to 4G5/2 → 6H9/2) from the complexes. The Commission Internationale de l'Éclairage (CIE) triangles indicated that the complexes emitted warm orange red light with color coordinates (x, y) ranging from (0.62, 0.36) to (0.40, 0.27). The investigation of the band gap as well as color parameters confirms the utility of these complexes in displays and LEDs.

Quantitative 31P-NMR for the Purity Determination of the Organophosphorus Compound Brigatinib and Its Method Validation.

The spectrum of 31P-NMR is fundamentally simpler than that of 1H-NMR; consequently identifying the target signal(s) for quantitation is simpler using quantitative 31P-NMR (31P-qNMR) than using quantitative 1H-NMR (1H-qNMR), which has been already established as an absolute determination method. We have previously reported a 31P-qNMR method for the absolute determination of cyclophosphamide hydrate and sofosbuvir as water-soluble and water-insoluble organophosphorus compounds, respectively. This study introduces the purity determination of brigatinib (BR), an organophosphorus compound with limited water solubility, using 31P-qNMR at multiple laboratories. Phosphonoacetic acid (PAA) and 1,4-BTMSB-d4 were selected as the reference standards (RSs) for 31P-qNMR and 1H-qNMR, respectively. The qNMR solvents were chosen based on the solubilities of BR and the RSs for qNMR. CD3OH was selected as the solvent for 31P-qNMR measurements to prevent the influence of deuterium exchange caused by the presence of exchangeable intramolecular protons of BR and PAA on the quantitative values, while CD3OD was the solvent of choice for the 1H-qNMR measurements to prevent the influence of water signals and the exchangeable intramolecular protons of BR and PAA. The mean purity of BR determined by 31P-qNMR was 97.94 ± 0.69%, which was in agreement with that determined by 1H-qNMR (97.26 ± 0.71%), thus indicating the feasibility of purity determination of BR by 31P-qNMR. Therefore, the findings of this study may provide an effective method that is simpler than conventional 1H-qNMR for the determination of organophosphorus compounds.

High Color-Purity and Efficient Pure-Blue Perovskite Light-Emitting Diodes Based on Strongly Confined Monodispersed Quantum Dots.

Here, we develop an in situ photoluminescence (PL) system to monitor the nucleation and growth of perovskite nanocrystals and control the monomer supply rate to achieve strongly confined and monodispersed quantum dots (QDs) with average size of 3.4 nm. Pure-blue (460 nm wavelength) CsPbBr3 QDs with near unity PL quantum yield and narrow size distribution (small size dispersion of 9.6%) were thus produced. Light-emitting diodes (LEDs) based on these QDs were prepared by using an all-solution processing route, which showed narrow electroluminescence with full width at half-maximum of 20 nm and a high color purity of 97.3%. The device also had a high external quantum efficiency of 10.1%, maximum luminance of 11 610 cd m-2, and continuous operation lifetime of 21 h at the initial luminance of 102 cd m-2, corresponding to the state-of-art for pure-blue perovskite LEDs.

Innovative methodology for comprehensive utilization of arsenic-bearing neutralization sludge.

Arsenic-bearing neutralization (ABN) sludge is a classical hazardous waste commonly found in nonferrous metallurgy. However, the current storage of these hazardous wastes not only has to pay costly hazardous waste taxes but also poses significant risks to both the environment and human health. To address these issues and achieve the comprehensive utilization and minimization of ABN sludge, this study proposes a new combined process. The process involves selective reduction roasting, leaching, and carbonation, through which, the arsenate and gypsum in the ABN sludge were recovered in the form of As(s), high-purity CaCO3, and H2S. The selective reduction behaviors of arsenate and gypsum were investigated through thermodynamic analysis and roasting experiments. The results indicated that the 95.35 % arsenate and 96.55 % gypsum in the sludge were selectively reduced to As4(g) and CaS at 950 °C by carbothermic reduction. The As4(g) was condensed to As(s) and enriched in the dust (As, 96.78 wt %). In the leaching process, H2S gas was adopted to promote the leaching of CaS, and resulted in 97.41 % of CaS in the roasted product was selectively leached in the form of Ca(HS)2, leading to a 74.11 % reduction in the weight of the ABN sludge. Then, the Ca(HS)2 was subjected to capture CO2 for the separation of Ca2+ and S2-. The result depicted that 99.69 % of Ca2+ and 99.12 % of S2- were separated as high-purity (99.12 wt %) CaCO3 and H2S (24.89 vol %) by controlling the terminal carbonation pH to below 6.55. The generated H2S can be economically converted to sulfur by the Clause process. The whole process realized the comprehensive resource recovery and the minimization of the sludge, which provides an alternative solution for the clean treatment of hazardous ABN waste.

Deep resource utilization of hazardous arsenic-alkali slag: Thermodynamic analysis, mechanism investigation and process optimization.

The best solution to address environmental pollution caused by arsenic-containing hazardous waste is to prepare high-purity elemental arsenic from such waste. The key to this approach lies in the efficient separation of arsenic from various impurities. This paper presents a viable solution for producing high-purity elemental arsenic from arsenic-alkali slag, and the keylies in utilizing the selective precipitation of magnesium ammonium arsenate (MgNH4AsO4) to achieve efficient separation of arsenic from alkali, antimony, and other impurities. Thermodynamic analysis and hydrometallurgical condition experiments indicate that in complex alkaline arsenic-containing solutions, over 90% of arsenic components can selectively precipitate in the form of MgNH4AsO4. The content of arsenic in the resulting precipitate reaches approximately 30%, while the content of antimony is below 0.1%. This achieves efficient enrichment of arsenic and preliminary separation of impurities in complex arsenic-alkali slag. Thermodynamic analysis and pyrometallurgical condition experiments demonstrate that the precipitate of MgNH4AsO4 can be reduced to elemental arsenic with an arsenic content reaching 99.85%, and an antimony content as low as 0.05%. This achieves a profound separation of arsenic from impurities. Based on the research presented in this paper, a production line was established that enables the deep resource utilization of arsenic-alkali slag.

High purity of human secreted phospholipase A2 group IIE in Pichia pastoris using basal salts medium comparison with YPD medium.

Secreted phospholipase A2s (sPLA2s) are a group of enzymes with 6-8 disulfide bonds that participate in numerous physiological processes by catalyzing the hydrolysis of phospholipids at the sn-2 position. Due to their high content of disulfide bonds and hydrolytic activity toward cell membranes, obtaining the protein of sPLA2s in the soluble and active form is challenging, which hampers their functional study. In this study, one member of recombinant human sPLA2s, tag-free group IIE (GIIE), was expressed in Pichia pastoris. The protein GIIE was purified from the crude culture supernatant by a two-step chromatography procedure, a combination of cation exchange and size-exclusion chromatography. In the shake flask fermentation, Protein of GIIE with higher purity was successfully obtained, using basal salts medium (BSM) instead of YPD medium. In the large-scale fermentation, each liter of BSM produced a final yield of 1.2 mg pure protein GIIE. This protocol will facilitate further research of GIIE and provide references for the production of other sPLA2 members.