Advanced Buffering Acidic Aqueous Electrolytes for Ultra-Long Life Aqueous Zinc-Ion Batteries.

Mild aqueous Zn batteries have attracted increasing attention for energy storage due to the advantages of high safety and low cost; however, the rechargeability of Zn anodes is one major issue for practical applications. In this work, an effective approach is proposed to improve the reversibility and stability of Zn anodes using advanced acidic electrolytes. A trace amount of acetic acid (HAc) is employed as a buffering agent to provide a stable pH environment in aqueous Zn electrolytes, and thus suppress passivation from precipitation reactions on Zn electrodes. Meanwhile, tetramethylene sulfone (TMS) is introduced as the critical component to stabilize the Zn anodes in the acidic electrolyte. TMS greatly strengthens the hydrogen-bonding network with reduced H2 O activity and extends the electrochemical window of acidic electrolytes. With the optimal 3 m Zn(OTF)2 in (H2 O-HAc)/TMS acidic electrolyte (pH 1.6), the Zn electrode exhibits a coulombic efficiency of >99.8% and smooth Zn deposition. The Zn-V2 O5 full cell demonstrates ultra-stable cycling over 20 000 cycles with a low decay rate of 0.0009% for each cycle at a negative/postive capacity ratio of 6.5. This work provides an insightful perspective to stabilize Zn electrodes by regulating the pH environment and limiting the H2 O activity simultaneously for long-life Zn anodes.

High-Performance Lithium-Oxygen Battery Electrolyte Derived from Optimum Combination of Solvent and Lithium Salt.

To fabricate a sustainable lithium-oxygen (Li-O2) battery, it is crucial to identify an optimum electrolyte. Herein, it is found that tetramethylene sulfone (TMS) and lithium nitrate (LiNO3) form the optimum electrolyte, which greatly reduces the overpotential at charge, exhibits superior oxygen efficiency, and allows stable cycling for 100 cycles. Linear sweep voltammetry (LSV) and differential electrochemical mass spectrometry (DEMS) analyses reveal that neat TMS is stable to oxidative decomposition and exhibit good compatibility with a lithium metal. But, when TMS is combined with typical lithium salts, its performance is far from satisfactory. However, the TMS electrolyte containing LiNO3 exhibits a very low overpotential, which minimizes the side reactions and shows high oxygen efficiency. LSV-DEMS study confirms that the TMS-LiNO3 electrolyte efficiently produces NO2-, which initiates a redox shuttle reaction. Interestingly, this NO2-/NO2 redox reaction derived from the LiNO3 salt is not very effective in solvents other than TMS. Compared with other common Li-O2 solvents, TMS seems optimum solvent for the efficient use of LiNO3 salt. Good compatibility with lithium metal, high dielectric constant, and low donicity of TMS are considered to be highly favorable to an efficient NO2-/NO2 redox reaction, which results in a high-performance Li-O2 battery.