Pectoralis major pedicle bone grafting vs. tricortical iliac grafting for Neer 4-part proximal humerus fractures: a randomized controlled trial.

BACKGROUND: The risk of avascular necrosis, nonunion, or malunion is high in osteoporosis-related 4-part fractures. We evaluated the results of patients who underwent plate osteosynthesis with a vascularized pectoralis major graft compared with tricortical iliac grafting to treat 4-part proximal humerus fractures. MATERIAL AND METHODS: Thirty-four patients aged 50-75 years with Neer 4-part proximal humerus fractures were studied. Group A (n = 17) underwent osteotomy of a 2.5 ± 1 cm pectoralis major pedicle bone graft and plate application, whereas group B (n = 17) underwent plate osteosynthesis using iliac autogenous grafts. Final follow-up assessments included evaluation using Constant and American Shoulder and Elbow Surgeons scoring systems, humeral neck-shaft angle (HNSA), humeral head height, and humeral head avascular necrosis. RESULTS: Reduction loss was observed in 3 patients (17.6%) in group A, whereas it was observed in 10 patients (58.8%) in group B (P = .013). Humeral head avascular necrosis was found in 1 patient (5.8%) in group A, whereas it was found in 5 patients (29.4%) in the other group (P = .071). The HNSA was normal in 12 (70.5%) of group A patients, whereas it was normal in 6 (35.2%) of group B patients. The HNSA was weak or bad (<1200) in 29.4% of group A patients, whereas this rate was 64.7% in group B patients. Humeral head height was 2.64 ± 1.45 mm in group A and 3.66 ± 1.65 mm in group B. There were no statistically significant differences between the 2 groups in terms of Constant and American Shoulder and Elbow Surgeons scoring systems. CONCLUSION: Pectoralis major bone pedicle graft in Neer 4-part proximal humerus fractures reduces the risk of avascular necrosis and nonunion rates. Our technique yielded excellent clinical and radiological results. We achieved recovery without creating additional donor site morbidity.

Outcomes of Selective Arthrodesis Based on Joints Affected in 33 Feet With Müller-Weiss Disease.

No consensus exists regarding operative treatment of Müller-Weiss disease (MWD). Its only classification is based solely on Méary's angle and serves neither as guide to management nor prognosis. We report on 33 feet that underwent surgery following failed conservative management. Treatment was directed towards joint(s) involved, as determined by clinical examination, plain radiography and SPECT-CT. Thus, surgery consisted of isolated talonavicular in 6 feet, triple in 8, subtalar and talonavicular in 7, talonaviculocuneiform in 4, talonaviculocuneiform with interpositional tricortical iliac crest graft in 6 and pantalar arthrodesis in 2. PROMIS scores for pain interference and depression decreased significantly (p < .001) with significant accompanying increase in physical function (p = .003). Union occurred in 31 of 33 feet (94%) with complete resolution of pain at an average follow-up of 84 months. Of the 2 nonunions, 1 had fracture through the lateral navicular, and the other marked sclerosis and avascularity of the lateral navicular. We describe our pathways for selecting arthrodesis based on the joints affected. Isolated talonavicular arthrodesis was performed in early stages of MWD, which begins at the talonavicular articulation. When disease extended to both sides of the navicular, we performed talonaviculocuneiform arthrodesis. When considering isolated talonavicular, double medial or triple arthrodesis, there should be adequate cancellous bone stock remaining in the lateral part of the navicular, as determined on medial oblique radiographs and CT scan. In case of inadequate bone stock or fracture through the lateral navicular, talonaviculocuneiform arthrodesis with interpositional iliac crest bone graft is recommended.

Post-treatment Functional Outcomes of Distal Tibiofibular Syndesmosis Injuries With Varying Duration and Method of Stabilization.

The purpose of this study was to assess whether the type and duration of screw fixation affects ankle joint functional scores and patient activity levels. We evaluated 55 patients who had undergone surgical treatment for ankle fracture with concomitant distal tibiofibular syndesmosis injury. The follow-up period ranged from 2 years to 4 years and 2 months (mean 36 months). Depending on the time of screw removal, patients were divided into 2 groups (the 8-15-week group-19 patients, and the 16-22-week group-36 patients). There were 17 patients with tricortical and 38 patients with quadricortical syndesmosis fixation. The following parameters were assessed: range of motion, rates of complications, level of pain in visual analogue scale (VAS), and function. In the quadricortical fixation group the range of plantar flexion p = .04 and adduction p = .043 were significantly lower in the operated than in the nonoperated limb. In the patients who had their syndesmotic screws removed after 16-22 weeks, the range of plantar flexion in the operated limb was significantly lower than that in the nonoperated limb. We observed no differences between the evaluated groups in terms of ankle joint mobility, VAS pain levels, functional outcomes, or complication rates. All the analyzed subgroups showed poorer ranges of some types of motion in the ankle and worse functional scale and VAS pain scores after treatment in comparison with those before the injury. We suggest removing the syndesmotic screws after 8-15 weeks, due to the possibility of earlier rehabilitation, faster return to work and physical activity and less burden on the health care system. Tricortical or quadricortical syndesmosis fixation is at the surgeon's discretion.

Intraoperative imaging and navigated spinopelvic instrumentation: S2-alar-iliac screws combined with tricortical S1 pedicle screw fixation.

PURPOSE: The present study aimed to assess the feasibility, safety and accuracy of navigated spinopelvic fixation with focus on S2-alar-iliac screws (S2AIS) and tricortical S1 pedicle screw implantation with the use of high-resolution three-dimensional intraoperative imaging and real-time spinal navigation. METHODS: Patients undergoing navigated intraoperative CT-based spinopelvic stabilization between January 2016 and September 2019 were included. Pelvic fixation was achieved by implantation of S2AIS or iliac screws (IS). S1 screws were implanted with the goal of achieving tricortical purchase. In all cases, instrumentation was performed with real-time spinal navigation and intraoperative screw positioning was assessed using intraoperative computed tomography (iCT), cone-beam CT (CBCT) and robotic cone-beam CT (rCBCT). Screw accuracy was evaluated based on radiographic criteria. To identify predictors of complications, univariate analysis was performed. RESULTS: Overall, 52 patients (85%) received S2AIS and nine patients (15%) received IS instrumentation. Intraoperative imaging and spinal navigation were performed with iCT in 34 patients, CBCT in 21 patients and rCBCT in six patients. A total number of 10/128 (7.8%) iliac screws underwent successful intraoperative correction due to misalignment. Tricortical purchase was successfully accomplished in 58/110 (53%) of the S1 screws with a clear learning curve in the course of time. S2AIS implantation was associated with significantly fewer surgical side infection-associated surgeries. CONCLUSIONS: Real-time navigation facilitated spinopelvic instrumentation with increasing accuracy of S2AIS and tricortical S1 screws. Intraoperative imaging by iCT, CBCT or rCBCT permitted screw assessment with the chance of direct navigated revision of misplaced iliac screws to avoid secondary screw revision surgery.

Experimental analysis of the influence of cortical bone layers and bone quantity on implant primary stability.

The systematic analysis of parameters impacting implant primary stability is difficult to achieve with human cadavers or animal models, particularly for complex trans-sinus procedures to determine the effects of cortical layers and bone engagement on implant stability before and after a simulated load in vitro. Solid rigid polyurethane blocks, partially intersected by an 8-mm-thick space, were created to imitate tri-cortical situations, the presence of the sinus cavity, and the posterior maxilla with different degrees of bone atrophy. Implants were inserted through the cavity at an angle of 30˚ (scenarios 1 and 2) to imitate the clinical protocol. Controls simulating uni-cortical anchorage and no sinus cavity were also included (controls 1 and 2). Four parameters were measured: peak insertion torque, insertion work, resistance to lateral bending loads and extraction torque. Scenarios 1 and 2 displayed similar peak insertion torque to control 2, where all three groups anchored equal amounts of bone surrogate. The distribution of surrogate bone in contact with trans-cavity implants influenced both extraction torque and the degree of lateral bending. Sufficient peak insertion torque can be attained with a trans-sinus tricortical implant anchorage providing sufficient apical and coronal bone is engaged.

Is there a difference in outcome of arthroscopic iliac crest autograft and allograft in recurrent anterior shoulder instability?

OBJECTIVE: The aim of this study was to compare outcomes of arthroscopic tricortical iliac crest autograft and allograft bone blocks for recurrent traumatic anterior shoulder instability in terms of bone resorption, union and recurrent instability and assess which one is a better graft choice. PATIENTS AND METHODS: Twenty-two consecutive patients treated for recurrent traumatic anterior shoulder instability that required reconstruction with bone block were included in the study. Surgical reconstruction was carried out arthroscopically with contoured tricortical iliac crest autograft or allograft. At follow-up, patients were assessed for Oxford Shoulder Instability Score (OSIS), recurrent dislocation, apprehension testing, complications, and 3-dimensional computed tomography (CT) for resorption and union rate at a mean of 10.89 months. RESULTS: There were 10 patients in the allograft group with a median age of 27.7 years and a mean follow-up of 26.6 months. In the autograft group, there were 12 patients with a median age of 29 years and a mean follow-up of 28.7 months. The OSIS increased in both groups but was significantly higher in the autograft group (54.1 vs 48.2, p = 0.02). There were 2 failures in each group but no hardware complications. Allograft had higher resorption rate in comparison (75% in allograft vs 40% in autograft) and higher non-union rate (62.5% in allograft vs 16.5% in autograft). CONCLUSION: This study demonstrated that both tricortical iliac crest autograft and allograft can improve shoulder instability symptoms. However, the results suggest that autograft may lead to significantly improved instability score, higher union rate and less bone resorption. LEVEL OF EVIDENCE: IV, retrospective study.

Use of tricortical iliac crest strut autograft in comminuted posterior wall acetabular fractures: A case series.

PURPOSE: The results for fixation of comminuted posterior wall acetabular fractures are not very promising with reported complications in terms of osteoarthritis, nonunion and malunion which subsequently require conversion to total hip arthroplasty. The conversion to total hip arthroplasty is possible in patients over 50 years of age but not in younger patients. So this requires new methods for salvage of the native hip in young patients. METHODS: There were six patients in our series with highly comminuted posterior wall acetabular fractures where the fragments were excised and the gap filled with tricortical anterior iliac-crest strut autograft, fixed with screws and plate. RESULTS: Good results were achieved in four out of six patients analyzed clinically using the Merle d'Aubinge score modified by Matta and radiologically by Matta scoring. These patients have returned to original work and are walking independently. The good result in one patient deteriorated from good to poor between one and two years. One patient developed infection and excision arthroplasty was done. The graft incorporated well in five out of six patients. CONCLUSION: The use of iliac crest autograft is a better, advanced and promising technique as it provides a new wall to the weight bearing dome of the acetabulum for articulation with the femoral head. The rates of nonunion, malunion, post traumatic osteoarthritis are less as compared to the fixation of the comminuted fragments. The need for conversion to total hip arthroplasty is also less.

Non-vascularised corticocancellous (tricortical) iliac bone graft longer than 3 cm for non-union after failed surgical treatment.

PURPOSE: We hypothesised that traditional iliac tricortical bone grafts (no vascularised) still have a reasonable role in promoting satisfactory bony healing in non-union defects of certain sizes. Here, we report the clinical/radiological outcomes through a retrospective case series. METHODS: We screened 74 patients with definitive non-union in the long bones of the upper extremities who visited the outpatient department from 2008 to 2018. Among these patients, 25 who met our inclusion/exclusion criteria were investigated. RESULTS: The mean age was 51.92 years, and there were 12, 9, 1, and 3 lesions of the radius, ulna, clavicle, and humerus, respectively. The tools for primary fixations were plate and intramedullary nails in 24 and 1 patients, respectively. Six patients presented with atrophic non-union. The mean period from a previous surgery was 6.84 months. The mean defective bone sizes were 1.81 and 3.50 cm pre-debridement and post-debridement, respectively. All devices had locking plates longer than the previous plate, and the graft was concurrently fixed by screws in three patients. At a mean of 15.92 weeks after the revision surgery, all patients experienced union. At the final follow-up, the clinical outcomes were satisfactory. No significant differences in clinical outcomes were found according to the lesion, type of non-union, period from the previous surgery, or harvest length of the iliac bone. CONCLUSIONS: If the proper indications and some technical aspects are considered, a non-vascularised iliac bone graft longer than 3 cm could still be a reasonable option for treating diaphyseal non-union of the upper extremities. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Tricortical versus bicortical anchorage in a double-screw tandem skeletal expander and a single-screw maxillary anchorage rapid palatal expander: A finite element analysis.

Objective: This study aims to employ finite element method (FEM) analysis to compare the differences between bicortical and tricortical anchorage of the posterior miniscrews in a single-screw miniscrew-assisted rapid palatal expansion (MARPE) and a double-screw tandem skeletal expander (TSE) under open and closed suture conditions. Methods: A cone beam computed tomography of the human skull of a 21.5-year-old female was utilized as a model for creating a FEM analysis. Simulations involved the insertion of four palatal miniscrews: two anterior ones with bicortical anchorage and two posterior ones (one with bicortical and another with tricortical anchorage), under open and closed suture conditions in a single-screw MARPE and double-screw TSE, resulting in a total of eight different simulation configurations. Evaluation parameters include total deformation (mm), Von Mises stress (MPa), and strain for each miniscrew body. Results: Tricortical anchorage of the posterior miniscrews provides greater anchorage, higher stress, and deformation on the anterior miniscrews in single-screw MARPE. Tricortical anchorage combined with a double-screw TSE promotes a more even distribution of force and stress on miniscrews under open suture conditions, leading to a parallel midpalatal suture opening along its entire length and height. Conclusions: FEM analysis revealed favorable midpalatal suture opening with equal force distribution and less stress when posterior tricortical anchorage in conjunction with double-screw TSE is applied.

Syndesmosis fixation using dual 3.5 mm and 4.5 mm screws with tricortical and quadricortical purchase: a biomechanical study.

BACKGROUND: Grade 3 syndesmosis (high ankle) sprains of the ankle are frequently treated using screws that fix the distal fibula to the tibia. We hypothesized that forces acting on the distal fibula and displacements of the distal fibula relative to the tibia recorded during simulated ankle loading tests would be significantly affected by syndesmosis screw size and the number of engaged tibial cortices. METHODS: Distal fibular forces and displacements were measured after cutting the distal inferior tibiofibular ligaments and fixing the distal fibula to the distal fibula with 2 syndesmosis screws. Screws of 3.5 mm and 4.5 mm were applied with tricortical and quadricortical purchase. RESULTS: There were no significant differences in distal fibular forces or displacements between any combination of screw size and cortical purchase tested. The highest mean fibular force recorded in the study (110.2 N) occurred when 10 N-m of external foot torque was applied to a dorsiflexed ankle loaded with 1000 N axial weight-bearing force. For ankle dorsiflexion and external foot torque tests, the distal fibula always displaced posteriorly with respect to the tibia. Mean displacements of the fibula from 1000 N applied axial weight-bearing force (maximum 0.15 mm) and from 10 N-m of forced foot dorsiflexion (maximum 0.43 mm) were considerably less than those from 10 N-m external foot torque (1.7 mm to 2.7 mm). CONCLUSIONS: Screw size and the number of engaged tibial cortices had no significant effect on mechanical stability of the distal fibula during these tests. Application of external foot torque (internal tibial torque) to a weight-bearing ankle produced the greatest bending displacements of the screws, and should be avoided during rehabilitation to reduce the possibility of screw breakage. CLINICAL RELEVANCE: In terms of mechanical stability, surgeons may have considerable flexibility with regard to screw fixation of high ankle sprains.

Correction of cubitus valgus and reconstruction of lateral humerus condylar defect using tricortical iliac graft in pediatric patients.

BACKGROUND: Neglected non-united lateral humeral condyle fractures in pediatrics are a probable cause of cubitus valgus deformity which is a disabling complication. The ideal management for this condition is still debatable. This study aimed to evaluate the reconstruction of a non-united lateral humerus condylar fracture complicated by cubitus valgus using a tricortical iliac crest graft in pediatric patients. PATIENTS AND METHODS: Twenty children suffering from cubitus valgus as a complication after a non-united fracture of the lateral humeral condyle were included in this study. They were managed by open reduction, screw fixation, and reconstruction by an autologous tricortical iliac bone graft. We compared the preoperative and postoperative range of motion of the elbow, alignment, and elbow function using the Mayo elbow performance index. RESULTS: There was a statistically significant improvement in the elbow range of motion postoperatively, and there was a highly significant improvement regarding the elbow alignment and function. CONCLUSION: Open reduction, screw fixation, and reconstruction by the autologous tricortical iliac bone graft is an effective technique for the management of cubitus valgus due to neglected non-united lateral humeral condyle fractures in pediatrics.

Clinical Outcomes of Fixation of Depressed Posterolateral Tibial Plateau Fractures Using a Direct Lateral Approach.

Introduction: Fixation of plateau posterolateral fracture (PLF) is challenging because the fracture site is mostly covered by vital neurovascular structures. We operated on 15 cases of PLF using a direct lateral approach. This study aims to report on clinical results. Material and methods: Between 2017 and 2019, 15 cases of PLFs were fixed with a direct lateral approach and a tricortical autologous bone graft from the iliac crest. A depression of more than 2 mm was indicated for the surgical treatment. Clinical evaluation included Lysholm score, International Knee Documentation Committee Score (IKDC) score, and Tegner activity scale after two years follow-up. Results: The last follow-up was at 24 months after the operation. The mean postoperative Tegner activity scale did not change significantly compared to before the injury (6.5 (6-7) vs. 7 (6-8, p = 0.5)). The postoperative IKDC and Lysholm scores improved significantly compared to before the operation (p < 0.001). The full range of motion was seen in all patients except one who was manipulated after three months. Conclusions: Surgical treatment using a direct lateral approach is a safe procedure for PLFs that results in good, short-term clinical and radiologic outcomes without fibular osteotomy or compromising the important neurovascular structures. Level of evidence: IV.

Multi-rod fixation in spinal neuroarthropathy: a novel surgical technique.

Spinal cord injury (SCI) leads to compromised biomechanical stability due to impaired neuroprotection. This may trigger deformity and destruction of multiple segments of the spine which is known as spinal neuroarthropathy (SNA) or Charcot arthropathy. Surgical treatment of SNA is highly demanding in terms of reconstruction, realignment, and stabilization. In particular, construct failure due to the combination of high shear forces and reduced bone mineral density in the lumbosacral transition zone is a frequent complication in SNA. Notably, up to 75% of SNA patients need multiple revisions within the first year after surgery in order to achieve successful bony fusion. The purpose of this technical report is to present a novel surgical approach with higher overall construct stability to efficiently treat SNA and avoiding repetitive revisions. The new technique of triple rod stabilisation of the lumbosacral transition zone in combination with the introduction of tricortical laminovertebral (TLV) screws is demonstrated in three patients with complete SCI of the thoracic spinal cord. After surgery all patients reported an improvement of the Spinal Cord Independence Measure III (SCIM III) and none of the reported cases showed construct failure within an at least 9 months follow up period. Although TLV screws violate the integrity of the spinal canal, there were no complications with regard to cerebral spinal fluid fistulas and/or arachnopathies so far. The new concept of triple rod stabilization in combination with TLV screws provides improved construct stability in patients with SNA and thus could help to reduce revision and complications rates and improve patient outcome in this disabling degenerative disease.

Compression of Intercalary Bone Graft Used in Fusion of the Proximal Interphalangeal Joint after Failed Arthroplasty.

Fusion of the proximal interphalangeal joint (PIPJ) after failed arthroplasty may be challenging in view of bone loss at the ends of the proximal phalanx and the middle phalanx. This might require the use of a structural bone graft to fill the defect and avoid shortening of the digit. Although several methods have been described for primary PIPJ fusion, none of these methods addresses bone loss at this joint. We use a tricortical iliac crest bone graft fashioned to provide the required angulation at the fusion site. A dorsal plate is used to fix the fusion mass and obliquely placed screws provide sequential compression at both ends of the bone graft. We have performed this technique safely in three patients with no complications. Level of Evidence: Level V (Therapeutic).

Tricortical Bone Grafting with Limited Midcarpal and Carpometacarpal Fusion for the Treatment of Giant Cell Tumor of the Capitate.

Background Giant cell tumor (GCT) of capitate is a rare lesion that is challenging to treat. Case Description We present a case of a 12-year-old girl suffering from a GCT of the capitate. Wide excision combined with adjuvant treatment including hydrogen peroxide, alcohol, tricortical bone grafting, and limited midcarpal and carpometacarpal fusion achieved good functional result without evidence of tumor recurrence or radiocarpal degeneration at 8 years postoperatively. Clinical Relevance In this case with long-term follow-up, surgical treatment of capitate GCT with limited midcarpal and carpometacarpal fusion led to a satisfactory outcome despite the alteration of wrist kinematics.

Osteology of the ilium revised: illuminating the clinical relevance.

BACKGROUND: Several studies on anterior and posterior pelvic ring fixation have identified a fragile monocortical area located at the iliac wing. However, there are no current studies regarding this structure's dimensions and relation to known anatomic structures. METHODS: Eleven human ilia were dissected from 6 specimens. After debulking soft tissue, photoluminescence was used to indicate the fragile area. The size and thickness of the iliac wing were determined and mapped in relation to the anterior superior iliac spine (ASIS) and the posterior superior iliac spine (PSIS). RESULTS: This photoluminescent unicortical area measured 15.57 cm2 with a mean minimal thickness of 1.37 mm at its thinnest part. Its average diameter was 41.15 mm horizontally and 37.45 mm vertically. In all cases, it was located at the middle third of the ilium with a mean distance of 64.58 mm to the AIIS and 62.73 mm to the PSIS. Trajectory angulation above 4.5° from the PSIS lead to violation of this area. CONCLUSION: This study provides useful anatomical information regarding a thin unicortical area at the iliac wing that is relevant to anterior and posterior pelvic ring fixation and the potential complications that can arise from iatrogenic perforation of this area.

Hybrid Fixation Restores Tibiofibular Kinematics for Early Weightbearing After Syndesmotic Injury.

BACKGROUND: Disruption of the anterior inferior tibiofibular ligament (AITFL), posterior inferior tibiofibular ligament (PITFL), and interosseous membrane (IOM) is a predictive measure of residual symptoms after an ankle injury. Controversy remains regarding the ideal fixation technique for early return to sport, which requires restoration of tibiofibular kinematics with early weightbearing. PURPOSE: To quantify tibiofibular kinematics after syndesmotic fixation with different tricortical screw and suture button constructs during simulated weightbearing. STUDY DESIGN: Controlled laboratory study. METHODS: A 6 degrees of freedom robotic testing system was used to test 9 fresh-frozen human cadaveric specimens (mean age, 65.1 ± 17.3 years). A 200-N compressive load was applied to the ankle, while a 5-N·m external rotation and a 5-N·m inversion moment were applied independently to the ankle at 0° of flexion, 15° and 30° of plantarflexion, and 10° of dorsiflexion. Fibular medial-lateral translation, anterior-posterior translation, and internal-external rotation relative to the tibia were tracked by use of an optical tracking system in the following states: (1) intact ankle; (2) AITFL, PITFL, and IOM transected ankle; (3) single-screw fixation; (4) double-screw fixation; (5) hybrid fixation; (6) single suture button fixation; and (7) divergent suture button fixation. Repeated-measures analysis of variance with Bonferroni correction was performed for statistical analysis. RESULTS: In response to the external rotation moment and axial compression, single tricortical screw fixation resulted in significantly higher lateral translation of the fibula compared with that of the intact ankle at 10° of dorsiflexion (P < .05). Suture button fixation resulted in significantly higher posterior translation of the fibula at 0° of flexion and 10° of dorsiflexion, whereas divergent suture button fixation resulted in higher posterior translation at only 0° of flexion (P < .05). In response to the inversion moment and axial compression, single tricortical screw and hybrid fixation significantly decreased lateral translation in plantarflexion, whereas double tricortical screw fixation and hybrid fixation significantly decreased external rotation of the fibula compared with that of the intact ankle at 15° of plantarflexion (P < .05). CONCLUSION: Based on the data in this study, hybrid fixation with 1 suture button and 1 tricortical screw may most appropriately restore tibiofibular kinematics for early weightbearing. However, overconstraint of motion during inversion may occur, which has unknown clinical significance. CLINICAL RELEVANCE: Surgeons may consider this data when deciding on the best algorithm for syndesmosis repair and postoperative rehabilitation.

Sagittal instability with inversion is important to evaluate after syndesmosis injury and repair: a cadaveric robotic study.

PURPOSE: Disruption of the syndesmosis, the anterior-inferior tibiofibular ligament (AITFL), the posterior-inferior tibiofibular ligament (PITFL), and the interosseous membrane (IOM), leads to residual symptoms after an ankle injury. The objective of this study was to quantify tibiofibular joint motion with isolated AITFL- and complete syndesmotic injury and with syndesmotic screw vs. suture button repair compared to the intact ankle. METHODS: Nine fresh-frozen human cadaveric specimens (mean age 60 yrs.; range 38-73 yrs.) were tested using a six degree-of-freedom robotic testing system and three-dimensional tibiofibular motion was quantified using an optical tracking system. A 5 Nm inversion moment was applied to the ankle at 0°, 15°, and 30° plantarflexion, and 10° dorsiflexion. Outcome measures included fibular medial-lateral translation, anterior-posterior translation, and external rotation in each ankle state: 1) intact ankle, 2) AITFL transected (isolated AITFL injury), 3) AITFL, PITFL, and IOM transected (complete injury), 4) tricortical screw fixation, and 5) suture button repair. RESULTS: Both isolated AITFL and complete injury caused significant increases in fibular posterior translation at 15° and 30° plantarflexion compared to the intact ankle (p < 0.05). Tricortical screw fixation restored the intact ankle tibiofibular kinematics in all planes. Suture button repair resulted in 3.7 mm, 3.8 mm, and 2.9 mm more posterior translation of the fibula compared to the intact ankle at 30° and 15° plantarflexion and 0° flexion, respectively (p < 0.05). CONCLUSION: Ankle instability is similar after both isolated AITFL and complete syndesmosis injury and persists after suture button fixation in the sagittal plane in response an inversion stress. Sagittal instability with ankle inversion should be considered when treating patients with isolated AITFL syndesmosis injuries and after suture button fixation. LEVEL OF EVIDENCE: Controlled laboratory study, Level V.

Distal radius correction osteotomy with tricortical bone graft is a successful method in heavy smokers.

BACKGROUND: Corrective osteotomy is a technically challenging surgical option to improve wrist function in tilted distal radius malunions. However fracture healing in smokers is adversely affected. The aim of this study was to evaluate the clinical and radiological effect of cigarettes on bone union in heavy-smokers who underwent corrective osteotomy with a triangular bone graft harvested from the iliac crest. METHOD: Fifteen patients, who were treated using trapezoidal block grafts taken from the iliac crest, who were smokers of 20 or more cigarettes daily (heavy smokers) with no chronic disease, and who consented to participate in the study. Fifteen non-smoker patients of the same age group were determined as the control group. Radiological measurements were made to include radial inclination and ulnar variance in pre-operative and post-operative radiographs. Functional evaluation was performed using Q-DASH and MAYO hand-wrist scores. RESULTS: In both groups, the mean age of the patients was 49,1 ±â€¯3,92 years. Smokers group the bone union in the osteotomy line was observed after 16,63 (12-24 h) weeks, non-smokers grup 14.1 (12-24) weeks (p = 0.06). Range of motion is found similar clinic between in groups (p > 0.05). Q-DASH for group smokers was 17.54 ±â€¯1.85, nonsmokers 17.20 ±â€¯1.24 (p = 0,878); MAYO was 82.27 ±â€¯6.06 for 82.00 ±â€¯7.74 (p = 0.874). for group B. No statistically significant difference was noted between the groups. CONCLUSION: Our study showed that cigarette smoking did not have negative effect on union time in the metaphyseal region after correction osteotomy. The time of bone-union in heavy-smokers was 2.5 weeks more than that of non-smokers.

Giant Cell Tumor of the Capitate and Hamate: Case Report and of Literature Review.

Background In the hand, giant cell tumors (GCTs) of the bones account for 2 to 5% of all hand tumors; they are often seen in the metacarpals and phalanges, seldom in the carpal bones. In the carpal bones, GCT usually occurs as a single lesion, with multifocal involvement being extremely rare. On analysis of recent English literature, we could find out only two reports having simultaneous involvement of multiple carpal bones. Case Description We report a case of a 29-year-old female with simultaneous involvement of two carpal bones: capitate and hamate. After confirming the diagnosis by histopathological examination, the affected carpals were resected, and the defect was filled with autologous bone graft. Follow-up at 18 months demonstrated no evidence of local recurrence or metastatic disease, and the patient is now having a reasonable hand function. Literature Review We analyzed nine case reports on GCTs in carpal bones in the past 25 years. Seven out of nine cases that we could analyze showed single carpal bone involvement (three capitate, two scaphoid, one hamate, one triquetrum). In these, four patients had undergone resection, and five patients had undergone curettage, of whom one patient came back 5 months later with recurrence. Only two cases were there with simultaneous involvement of multiple carpal bones. Both the cases were managed with resection and reconstruction with autologous graft iliac graft. Clinical Relevance GCTs of the carpal bones are relatively rare, and simultaneous involvement of two bones is rarer. Every attempt should be made to preserve useful wrist range of motion by excision and limited carpal fusion.