RESUMEN
Chemosensor technology for trace gases in the air always aims to identify these compounds and then measure their concentrations. For identification, traceable methods are sparse and relate to large appliances such as mass spectrometers. We present a new method that uses the alternative traceable measurement of the ionization energies of trace gases in a way that can be miniaturized and energetically tuned. We investigate the achievable performance. Since tunable UV sources are not available for photoionization, we take a detour via impact ionization with electrons, which we generate using the photoelectric effect and bring to sharp, defined energies on a nanoscale in the air. Electron impact ionization is thus possible at air pressures of up to 900 hPa. The sensitivity of the process reaches 1 ppm and is equivalent to that of classic PID. With sharpened energy settings, substance identification is currently possible with an accuracy of 30 meV. We can largely explain the experimental observations with the known quantum mechanical models.
RESUMEN
The application of radio frequency (RF) vacuum electronics for the betterment of the human condition began soon after the invention of the first vacuum tubes in the 1920s and has not stopped since. Today, microwave vacuum devices are powering important applications in health treatment, material and biological science, wireless communication-terrestrial and space, Earth environment remote sensing, and the promise of safe, reliable, and inexhaustible energy. This article highlights some of the exciting application frontiers of vacuum electronics.
RESUMEN
A superaligned carbon nanotube (SACNT) film can act as an ideal gate electrode in vacuum electronics due to its low secondary electron emission, high electron transparency, ultrasmall thickness, highly uniform electric field, high melting point, and high mechanical strength. We used a SACNT film as the gate electrode in a thermionic emission electron tube and field emission display prototype. The SACNT film gate in a thermionic emission electron tube shows a larger amplification factor. A triode tube with the SACNT film gate is used in an audio amplification circuit. The SACNT film gate electrode in field emission devices shows better field uniformity. The field emission display prototype is demonstrated to dynamically display Chinese characters.
RESUMEN
A slow-wave structure improvement for enhancing the 2π-mode electronic efficiency is embodied in the validation of an extended interaction oscillator (EIO), which has an electronic efficiency of 6.52% at 0.22 THz from particle-in-cell (PIC) calculations. A 2π-mode bi-periodic slow-wave structure (BPSWS) with staggered long and short slots is utilized for optimizing the circuit performance. The proposed BPSWS has the capability of combining the respective advantages for both π and 2π-mode in terms of coupling performance and output performance, thus supporting a strongly-coupled 2π-mode with higher coupling capability. Compared with the typical mono-periodic SWS (MPSWS), the adopted strongly-coupled 2π-mode effectively improves the characteristic impedance M2R/Q by 103% to 66.79 Ω, the coupling coefficient by 66% to 0.497, and the normalized wave-amplitude by 22%. Accordingly, 503 W of average output power can be derived for the BPSWS-EIO with a 25.7 kV and 0.3 A sheet beam injected. Cold-test experiments were conducted, confirming that the 0.22 THz structure exhibits commendable fabrication precision and consistency and thus demonstrates the expected frequency response.
RESUMEN
Nanoscale vacuum channel triodes realize the vacuum-like transmission of electrons in the atmosphere because the transmission distance is less than the mean free path of electrons in air. This new hybrid device is the deep integration of vacuum electronics technology, micro-nano electronics technology, and optoelectronic technology. It has the advantages of both vacuum and solid-state devices and is considered to be the next generation of vacuum electronic devices. In this work, vertical nanoscale vacuum channel diodes and triodes with edge emission were fabricated using advanced micro-nano processing technology. The device materials were all based on the vacuum electronics material system. The field emission characteristics of the devices were investigated. The diode continued emitting at a bias voltage from 0 to 50 V without failure, and the current variation under different vacuum degrees was better than 2.1%. The field emission characteristics of the devices were evaluated over a wide pressure range of between 10-7 Pa and 105 Pa, and the results could explain the vacuum-like behavior of the devices when operating in air. The current variation of the triode is better than 6.1% at Vg = 8 V and Va = 10 V.
RESUMEN
The phase stability of a 140GHz, 1kW pulsed gyro-amplifier system and the phase dependence on the cathode voltage were experimentally measured. To optimize the measurement precision, the amplifier was operated at 47 kV and 1 A, where the output power was â¼ 30W. The phase was determined to be stable both pulse-to-pulse and during each pulse, so far as the cathode voltage and electron beam current are constant. The phase variation with voltage was measured and found to be 130±30°/kV, in excellent agreement with simulations. The electron gun used in this device is non-adiabatic, resulting in a steep slope of the beam pitch factor with respect to cathode voltage. This was discovered to be the dominant factor in the phase dependence on voltage. The use of an adiabatic electron gun is predicted to yield a significantly smaller phase sensitivity to voltage, and thus a more phase-stable performance. To our knowledge, these are the first phase measurements reported for a gyro-amplifier operating at a frequency above W-band.
RESUMEN
Scandate cathodes have exhibited superior emission properties compared to current state-of-the-art "M-type" thermionic cathodes. However, their integration into vacuum devices is limited in part by a lack of knowledge regarding their functional lifespan and behavior during operation. Here, we consider thermal desorption from scandate cathodes by examining the distribution of material deposited on interior surfaces of a sealed vacuum device after ~26,000 h of cathode operation. XPS, EDS, and TEM analyses indicate that on the order of 1 wt.% of the initial impregnate is desorbed during a cathode's lifetime, Ca does not desorb uniformly with time, and little to no Sc desorbs from the cathode surfaces (or does so at an undetectable rate). Findings from this first-ever study of a scandate cathode after extremely long-time operation yield insight into the utility of scandate cathodes as components in vacuum devices and suggest possible effects on device performance due to deposition of desorption products on interior device surfaces.
RESUMEN
The development of new types of light sources is necessary in order to meet the growing demands of consumers and to ensure an efficient use of energy. The cathodoluminescence process is still under-exploited for light generation because of the lack of cathodes suitable for the energy-efficient production of electron beams and appropriate phosphor materials. In this paper we propose a nano-graphite film material as a highly efficient cold cathode, which is able to produce high intensity electron beams without energy consumption. The nano-graphite film material was produced by using chemical vapor deposition techniques. Prototypes of cathodoluminescent lamp devices with a construction optimized for the usage of nano-graphite cold cathodes were developed, manufactured and tested. The results indicate prospective advantages of this type of lamp and the possibility to provide advanced power efficiency as well as enhanced spectral and other characteristics.