Strain Solitons in an Epitaxially Strained van der Waals-like Material.

Strain solitons are quasi-dislocations that form in van der Waals materials to relieve the energy associated with lattice or rotational mismatch. Novel electronic properties of strain solitons were predicted and observed. To date, strain solitons have been observed only in exfoliated crystals or mechanically strained crystals. The lack of a scalable approach toward the generation of strain solitons poses a significant challenge in the study of and use of their properties. Here, we report the formation of strain solitons with epitaxial growth of bismuth on InSb(111)B by molecular beam epitaxy. The morphology of the strain solitons for films of varying thickness is characterized with scanning tunneling microscopy, and the local strain state is determined from atomic resolution images. Bending in the solitons is attributed to interactions with the interface, and large angle bending is associated with edge dislocations. Our results enable the scalable generation of strain solitons.

Robust Luttinger Liquid State of 1D Dirac Fermions in a Van der Waals System Nb9Si4Te18.

We report on the Tomonaga-Luttinger liquid (TLL) behavior in fully degenerate 1D Dirac Fermions. A ternary van der Waals material Nb9Si4Te18 incorporates in-plane NbTe2 chains, which produce a 1D Dirac band crossing Fermi energy. Tunneling conductance of electrons confined within NbTe2 chains is found to be substantially suppressed at Fermi energy, which follows a power law with a universal temperature scaling, hallmarking a TLL state. The obtained Luttinger parameter of ∼0.15 indicates a strong electron-electron interaction. The TLL behavior is found to be robust against atomic-scale defects, which might be related to the Dirac electron nature. These findings, combined with the tunability of the compound and the merit of a van der Waals material, offer a robust, tunable, and integrable platform to exploit non-Fermi liquid physics.

Controlled Bipolar Doping of One-Dimensional van der Waals Nb2Pd3Se8.

Tailoring the electrical properties of one-dimensional (1D) van der Waals (vdW) materials is desirable for their applications toward electronic devices by exploiting their unique characteristics. However, 1D vdW materials have not been extensively investigated for modulation of their electrical properties. Here we control doping levels and types of 1D vdW Nb2Pd3Se8 over a wide energy range by immersion in AuCl3 or ß-nicotinamide adenine dinucleotide (NADH) solutions, respectively. Through spectroscopic analyses and electrical characterizations, we confirm that the charges were effectively transferred to Nb2Pd3Se8, and the dopant concentration was adjusted to the immersion time. Furthermore, we make the axial p-n junction of 1D Nb2Pd3Se8 by a selective area p-doping using the AuCl3 solution, which exhibits rectifying behavior with an Iforward/Ireverse of 81 and an ideality factor of 1.2. Our findings could pave the way to more practical and functional electronic devices based on 1D vdW materials.

Unconventional Pressure-Driven Metamagnetic Transitions in Topological van der Waals Magnets.

Activating metamagnetic transitions between ordered states in van der Waals magnets and devices bring great opportunities in spintronics. We show that external pressure, which enhances the interlayer hopping without introducing chemical disorders, triggers multiple metamagnetic transitions upon cooling in the topological van der Waals magnets Mn(Bi1-xSbx)4Te7, where the antiferromagnetic interlayer superexchange coupling competes with the ferromagnetic interlayer coupling mediated by the antisite Mn spins. The temperature-pressure phase diagrams reveal that while the ordering temperature from the paramagnetic to ordered states is almost pressure-independent, the metamagnetic transitions show nontrivial pressure and temperature dependence, even re-entrance. For these highly anisotropic magnets, we attribute the former to the ordering temperature being only weakly dependent on the intralayer parameters and the latter to the parametrically different pressure and temperature dependence of the two interlayer couplings. Our independent probing of these disparate magnetic interactions paves an avenue for efficient magnetic manipulations in van der Waals magnets.

Magnetoelectric Response of Antiferromagnetic CrI3 Bilayers.

We predict that layer antiferromagnetic bilayers formed from van der Waals (vdW) materials with weak interlayer versus intralayer exchange coupling have strong magnetoelectric response that can be detected in dual-gated devices where internal displacement fields and carrier densities can be varied independently. We illustrate this strong temperature-dependent magnetoelectric response in bilayer CrI3 at charge neutrality by calculating the gate voltage-dependent total magnetization through Monte Carlo simulations and mean-field solutions of the anisotropic Heisenberg model informed from density functional theory and experimental data and present a simple model for electrical control of magnetism by electrostatic doping.

Possible Persistence of Multiferroic Order down to Bilayer Limit of van der Waals Material NiI2.

Realizing a state of matter in two dimensions has repeatedly proven a novel route of discovering new physical phenomena. Van der Waals (vdW) materials have been at the center of these now extensive research activities. They offer a natural way of producing a monolayer of matter simply by mechanical exfoliation. This work demonstrates that the possible multiferroic state with coexisting antiferromagnetic and ferroelectric orders persists down to the bilayer flake of NiI2. By exploiting the optical second-harmonic generation technique, both magnitude and direction of the ferroelectric order, arising from the cycloidal spin order, are successfully traced. The possible multiferroic state's transition temperature decreases from 58 K for the bulk to about 20 K for the bilayer. Our observation will spur extensive efforts to demonstrate multifunctionality in vdW materials, which have been tried mostly by using heterostructures of singly ferroic ones until now.

Twisted van der Waals Josephson Junction Based on a High-Tc Superconductor.

Stacking two-dimensional van der Waals (vdW) materials rotated with respect to each other show versatility for studying exotic quantum phenomena. In particular, anisotropic layered materials have great potential for such twistronics applications, providing high tunability. Here, we report anisotropic superconducting order parameters in twisted Bi2Sr2CaCu2O8+x (Bi-2212) vdW junctions with an atomically clean vdW interface, achieved using the microcleave-and-stack technique. The vdW junctions with twist angles of 0° and 90° showed the maximum Josephson coupling, comparable to that of intrinsic Josephson junctions. As the twist angle approaches 45°, Josephson coupling is suppressed, and eventually disappears at 45°. The observed twist angle dependence of the Josephson coupling can be explained quantitatively by theoretical calculation with the d-wave superconducting order parameter of Bi-2212 and finite tunneling incoherence of the junction. Our results revealed the anisotropic nature of Bi-2212 and provided a novel fabrication technique for vdW-based twistronics platforms compatible with air-sensitive vdW materials.

Ta2 Ni3 Se8 : 1D van der Waals Material with Ambipolar Behavior.

In this study, high-purity and centimeter-scale bulk Ta2 Ni3 Se8 crystals are obtained by controlling the growth temperature and stoichiometric ratio between tantalum, nickel, and selenium. It is demonstrated that the bulk Ta2 Ni3 Se8 crystals could be effectively exfoliated into a few chain-scale nanowires through simple mechanical exfoliation and liquid-phase exfoliation. Also, the calculation of electronic band structures confirms that Ta2 Ni3 Se8 is a semiconducting material with a small bandgap. A field-effect transistor is successfully fabricated on the mechanically exfoliated Ta2 Ni3 Se8 nanowires. Transport measurements at room temperature reveal that Ta2 Ni3 Se8 nanowires exhibit ambipolar semiconducting behavior with maximum mobilities of 20.3 and 3.52 cm2 V-1 s-1 for electrons and holes, respectively. The temperature-dependent transport measurement (from 90 to 295 K) confirms the carrier transport mechanism of Ta2 Ni3 Se8 nanowires. Based on these characteristics, the obtained 1D vdW material is expected to be a potential candidate for additional 1D materials as channel materials.

Patterning-Induced Ferromagnetism of Fe3GeTe2 van der Waals Materials beyond Room Temperature.

Magnetic van der Waals (vdW) materials have emerged as promising candidates for spintronics applications, especially after the recent discovery of intrinsic ferromagnetism in monolayer vdW materials. There has been a critical need for tunable ferromagnetic vdW materials beyond room temperature. Here, we report a real-space imaging study of itinerant ferromagnet Fe3GeTe2 and the enhancement of its Curie temperature well above ambient temperature. We find that the magnetic long-range order in Fe3GeTe2 is characterized by an unconventional out-of-plane stripe-domain phase. In Fe3GeTe2 microstructures patterned by a focused ion beam, the out-of-plane stripe domain phase undergoes a surprising transition at 230 K to an in-plane vortex phase that persists beyond room temperature. The discovery of tunable ferromagnetism in Fe3GeTe2 materials opens up vast opportunities for utilizing vdW magnets in room-temperature spintronics devices.

One-Dimensional van der Waals Material Tellurium: Raman Spectroscopy under Strain and Magneto-Transport.

Experimental demonstrations of one-dimensional (1D) van der Waals material tellurium (Te) have been presented by Raman spectroscopy under strain and magneto-transport. Raman spectroscopy measurements have been performed under strains along different principle axes. Pronounced strain response along the c-axis is observed due to the strong intrachain covalent bonds, while no strain response is obtained along the a-axis due to the weak interchain van der Waals interaction. Magneto-transport results further verify its anisotropic property, which results in dramatically distinct magneto-resistance behaviors in terms of three different magnetic field directions. Specifically, phase coherence length extracted from weak antilocalization effect, Lϕ ≈ T-0.5, claims its two-dimensional (2D) transport characteristics when an applied magnetic field is perpendicular to the thin film. In contrast, Lϕ ≈ T-0.33 is obtained from universal conductance fluctuations once the magnetic field is along the c-axis of Te, which indicates its nature of 1D transport along the helical atomic chains. Our studies, which are obtained on high quality single crystal Te thin film, appear to serve as strong evidence of its 1D van der Waals structure from experimental perspectives. It is the aim of this paper to address this special concept that differs from the previous well-studied 1D nanowires or 2D van der Waals materials.

Direct Fabrication of Functional Ultrathin Single-Crystal Nanowires from Quasi-One-Dimensional van der Waals Crystals.

Micromechanical exfoliation of two-dimensional (2D) van der Waals materials has triggered an explosive interest in 2D material research. The extension of this idea to 1D van der Waals materials, possibly opening a new arena for 1D material research, has not yet been realized. In this paper, we demonstrate that 1D nanowire with sizes as small as six molecular ribbons, can be readily achieved in the Ta2(Pd or Pt)3Se8 system by simple micromechanical exfoliation. Exfoliated Ta2Pd3Se8 nanowires are n-type semiconductors, whereas isostructural Ta2Pt3Se8 nanowires are p-type semiconductors. Both types of nanowires show excellent electrical switching performance as the channel material for a field-effect transistor. Low-temperature transport measurement reveals a defect level inherent to Ta2Pd3Se8 nanowires, which enables the observed electrical switching behavior at high temperature (above 140 K). A functional logic gate consisting of both n-type Ta2Pd3Se8 and p-type Ta2Pt3Se8 field-effect transistors has also been successfully achieved. By taking advantage of the high crystal quality derived from the parent van der Waals bulk compound, our findings about the exfoliated Ta2(Pd or Pt)3Se8 nanowires demonstrate a new pathway to access single-crystal 1D nanostructures for the study of their fundamental properties and the exploration of their applications in electronics, optoelectronics, and energy harvesting.

Modulating electronic structure by interlayer spacing and twist on bilayer bismuthene.

Modulation of the electronic structure has played a crucial role in advancing the field of two-dimensional materials, but there are still many unexplored directions, such as the twist angle for a novel degree of freedom, for modulating the properties of heterostructures. We observed a distinct pattern in the energy bands of bilayer bismuthene, demonstrating that modulating the twist angle and interlayer spacing significantly influences interlayer interactions. Our study of various interlayer spacings and twist angles revealed a close relationship between bandgap size and interlayer spacing, while the twist angle notably affects the shape of the energy bands. Furthermore, we observed a synergistic effect between these two factors. As the twist angle decreases, the energy bands become flat, and flat bands can be generated without requiring a specific angle on bilayer bismuthene. Our results suggest a promising way to tailor the energy band structure of bilayer 2D materials by varying the interlayer spacing and twist angle.

Interlayer-coupling-engineerable flat bands in twisted MoSi2N4bilayers.

The two-dimensional layered semiconductor MoSi2N4, which has several advantages including high strength, excellent stability, high hole mobility, and high thermal conductivity, was recently successfully synthesized using chemical vapor deposition. Based on first-principles calculations, we investigate the effects of the twist angle and interlayer distance variation on the electronic properties of twisted bilayer MoSi2N4. The flat bands are absent for twisted bilayer MoSi2N4when the twist angleθis reduced to 3.89°. Taking twisted bilayer MoSi2N4withθof 5.09° as an example, we find that flat bands emerge as the interlayer distance decreases. As the interlayer distance can be effectively modulated by hydrostatic pressure, we propose hydrostatic pressure as a knob for tailoring the flat bands in twisted bilayer MoSi2N4. Our findings provide theoretical support for extending the applications of MoSi2N4in strong correlation physics and superconductivity.

Salt-Assisted Vapor-Liquid-Solid Growth of 1D van der Waals Materials.

The method of salt-assisted vapor-liquid-solid (VLS) growth is introduced to synthesize 1D nanostructures of trichalcogenide van der Waals (vdW) materials, exemplified by niobium trisulfide (NbS3). The method uses a unique catalyst consisting of an alloy of Au and an alkali metal halide (NaCl) to enable rapid and directional growth. High yields of two types of NbS3 1D nanostructures, nanowires and nanoribbons, each with sub-ten nanometer diameter, tens of micrometers length, and distinct 1D morphology and growth orientation are demonstrated. Strategies to control the location, size, and morphology of growth, and extend the growth method to synthesize other transition metal trichalcogenides, NbSe3 and TiS3, as nanowires are demonstrated. Finally, the role of the Au-NaCl alloy catalyst in guiding VLS synthesis is described and the growth mechanism based on the relationships measured between structure (growth orientation, morphology, and dimensions) and growth conditions (catalyst volume and growth time) is discussed. These results introduce opportunities to expand the library of emerging 1D vdW materials to make use of their unique properties through controlled growth at nanoscale dimensions.

Ferromagnetic Order in 2D Layers of Transition Metal Dichlorides.

Magnetism in two dimensions is traditionally considered an exotic phase mediated by spin fluctuations, but far from collinearly ordered in the ground state. Recently, 2D magnetic states have been discovered in layered van der Waals compounds. Their robust and tunable magnetic state by material composition, combined with reduced dimensionality, foresee a strong potential as a key element in magnetic devices. Here, a class of 2D magnets based on metallic chlorides is presented. The magnetic order survives on top of a metallic substrate, even down to the monolayer limit, and can be switched from perpendicular to in-plane by substituting the metal ion from iron to nickel. Using functionalized STM tips as magnetic sensors, local exchange fields are identified, even in the absence of an external magnetic field. Since the compounds are processable by molecular beam epitaxy techniques, they provide a platform with large potential for incorporation into current device technologies.

High-κ Dielectric (HfO2)/2D Semiconductor (HfSe2) Gate Stack for Low-Power Steep-Switching Computing Devices.

Herein, a high-quality gate stack (native HfO2 formed on 2D HfSe2) fabricated via plasma oxidation is reported, realizing an atomically sharp interface with a suppressed interface trap density (Dit ≈ 5 × 1010 cm-2 eV-1). The chemically converted HfO2 exhibits dielectric constant, κ ≈ 23, resulting in low gate leakage current (≈10-3 A cm-2) at equivalent oxide thickness ≈0.5 nm. Density functional calculations indicate that the atomistic mechanism for achieving a high-quality interface is the possibility of O atoms replacing the Se atoms of the interfacial HfSe2 layer without a substitution energy barrier, allowing layer-by-layer oxidation to proceed. The field-effect-transistor-fabricated HfO2/HfSe2 gate stack demonstrates an almost ideal subthreshold slope (SS) of ≈61 mV dec-1 (over four orders of IDS) at room temperature (300 K), along with a high Ion/Ioff ratio of ≈108 and a small hysteresis of ≈10 mV. Furthermore, by utilizing a device architecture with separately controlled HfO2/HfSe2 gate stack and channel structures, an impact ionization field-effect transistor is fabricated that exhibits n-type steep-switching characteristics with a SS value of 3.43 mV dec-1 at room temperature, overcoming the Boltzmann limit. These results provide a significant step toward the realization of post-Si semiconducting devices for future energy-efficient data-centric computing electronics.

High In-Plane Thermoelectric Performance of Layered Bi4O4SeCl2.

The van der Waals semiconductor Bi4O4SeCl2 has recently attracted great interest due to its extremely small lattice thermal conductivity, which may find possible application in the field of energy conversion. Herein, we accurately predict the thermoelectric transport properties of Bi4O4SeCl2 using first-principles calculations and Boltzmann transport theory, where the carrier relaxation time is obtained by fully considering the electron-phonon coupling. It is found that a maximum p-type ZT value of 3.1 can be reached at 1100 K along the in-plane direction, which originates from increased Seebeck coefficient induced by multivalley band structure, as well as enhanced electrical conductivity caused by relatively stronger intralayer bonding. Besides, it is interesting to note that comparable p- and n-type ZT values can be realized in certain temperature regions, which is very desirable in the fabrication of thermoelectric modules.

Quantum-Confined Lifshitz Transition on Weyl Semimetal Td-MoTe2.

Adsorption of alkali atoms onto material surfaces is widely utilized for controlling electronic properties and is particularly effective for two-dimensional materials. While tuning the chemical potential and band gap and creating quantum-confined states are well established for alkali adsorption on semiconductors, the effects on semimetallic systems remain largely elusive. Here, utilizing angle-resolved photoemission spectroscopy measurements and density functional theory calculations, we disclose the creation of two-dimensional electron gas and the quantum-confined Lifshitz transition at the surface of a Weyl semimetal Td-MoTe2 by potassium adsorption. Electrons from potassium adatoms are shown to be transferred mainly to the lowest unoccupied band within the gapped part of the Brillouin zone, which, in turn, induces strong surface band bending and quantum confinement in the topmost layer. The quantum-confined topmost layer evolves from a semimetal to a strong metal with a Lifshitz transition departing substantially from the bulk band. The present finding and its underlying mechanism can be exploited for the creation of electronic heterojunctions in van der Waals semimetals.

Surface Doping and Dual Nature of the Band Gap in Excitonic Insulator Ta2NiSe5.

Excitons in semiconductors and molecules are widely utilized in photovoltaics and optoelectronics, and high-temperature coherent quantum states of excitons can be realized in artificial electron-hole bilayers and an exotic material of an excitonic insulator (EI). Here, we investigate the band gap evolution of a putative high-temperature EI Ta2NiSe5 upon surface doing by alkali adsorbates with angle-resolved photoemission and density functional theory (DFT) calculations. The conduction band of Ta2NiSe5 is filled by the charge transfer from alkali adsorbates, and the band gap decreases drastically upon the increase of metallic electron density. Our DFT calculation, however, reveals that there exist both structural and excitonic contributions to the band gap tuned. While electron doping reduces the band gap substantially, it alone is not enough to close the band gap. In contrast, the structural distortion induced by the alkali adsorbate plays a critical role in the gap closure. This work indicates a combined electronic and structural nature for the EI phase of the present system and the complexity of surface doping beyond charge transfer.

Tailoring Contacts for High-Performance 1D Ta2Pt3S8 Field-Effect Transistors.

Materials with van der Waals (vdW) unit structures rely on weak interunit vdW forces, facilitating physical separation and advancing nanomaterial research with remarkable electrical properties. Recently, there has been growing interest in one-dimensional (1D) vdW materials, celebrated for their advantageous properties, characterized by reduced dimensionality and the absence of dangling bonds. In this context, we synthesize Ta2Pt3S8, a 1D vdW material, and assess its suitability for field-effect transistor (FET) applications. Spectroscopic analysis and electrical characterization confirmed that the band gap and work function of Ta2Pt3S8 are 1.18 and 4.77 eV, respectively. Leveraging various electrode materials, we fabricated n-type FETs based on Ta2Pt3S8 and identified Cr as the optimal electrode, exhibiting a high mobility of 57 cm2 V-1 s-1. In addition, we analyzed the electron transport mechanism in n-type FETs by investigating Schottky barrier height, Schottky barrier tunneling width, and contact resistance. Furthermore, we successfully fabricated p-type operating Ta2Pt3S8 FETs using a molybdenum trioxide (MoO3) layer as a high work function contact electrode. Finally, we achieved Ta2Pt3S8 nanowire rectifying diodes by creating a p-n junction with asymmetric contact electrodes of Cr and MoO3, demonstrating an ideality factor of 1.06. These findings highlight the electronic properties of Ta2Pt3S8, positioning it as a promising 1D vdW material for future nanoelectronics and functional vdW-based device applications.