RESUMEN
Soil salinity is a significant challenge in agriculture, particularly in arid and semi-arid regions such as Pakistan, leading to soil degradation and reduced crop yields. The present study assessed the impact of different salinity levels (0, 25, and 50 mmol NaCl) and biochar treatments (control, wheat-straw biochar, rice-husk biochar, and sawdust biochar applied @ 1% w/w) on the germination and growth performance of wheat. Two experiments: a germination study and a pot experiment (grown up to maturity), were performed. The results showed that NaCl-stress negatively impacted the germination parameters, grain, and straw yield, and agronomic and soil parameters. Biochar treatments restored these parameters compared to control (no biochar), but the effects were inconsistent across NaCl levels. Among the different biochars, wheat-straw biochar performed better than rice-husk and sawdust-derived biochar regarding germination and agronomic parameters. Biochar application notably increased soil pHs and electrical conductivity (ECe). Imposing NaCl stress reduced K concentrations in the wheat shoot and grains with concomitant higher Na concentrations in both parts. Parameters like foliar chlorophyll content (a, b, and total), stomatal and sub-stomatal conductance, and transpiration rate were also positively influenced by biochar addition. The study confirmed that biochar, particularly wheat-straw biochar, effectively mitigated the adverse effects of soil salinity, enhancing both soil quality and wheat growth. The study highlighted that biochar application can minimize the negative effects of salinity stress on wheat. Specifically, the types and dosages of biochar have to be optimized for different salinity levels under field conditions.
Asunto(s)
Carbón Orgánico , Clorofila , Germinación , Potasio , Estrés Salino , Sodio , Triticum , Triticum/crecimiento & desarrollo , Triticum/metabolismo , Triticum/efectos de los fármacos , Triticum/fisiología , Germinación/efectos de los fármacos , Carbón Orgánico/farmacología , Clorofila/metabolismo , Potasio/metabolismo , Sodio/metabolismo , Semillas/crecimiento & desarrollo , Semillas/efectos de los fármacos , Semillas/metabolismo , Suelo/química , Grano Comestible/crecimiento & desarrollo , Grano Comestible/efectos de los fármacos , Grano Comestible/metabolismo , Pakistán , SalinidadRESUMEN
Present study assessed the growth of two plant species and ion uptake by them grown on different proportion of industrial solid waste and garden soil. The industrial waste having high concentration of chemicals were used with garden soil at different proportion i.e. 0% (T0), 5% (T1), 10% (T2), 15% (T3) and 20% (T4). Two species namely Conocarpus erectus (alien plant) and Dodonaea viscosa (indigenous) were used as test plants in pot study. Different parameters including growth, physiology, and anatomy of plants and concentration of cations (Na+, K+, Ca2+, and Mg2+) in the plant shoot and root were measured at different time duration (initial, 1st, 2nd, 3rd and 4th month). The key objective of the study was to use these plants to establish their plantations on the barren lands where industrial solid wastes were being disposed of. C. erectus showed better growth than D. viscosa, as well as more uptake of ions. A significant increase in plant growth was observed in fourth month in T1, where plant height reached 24.5% and 46% for C. erectus and D. viscosa, respectively. At harvest, in C. erectus, no significant difference in the fresh (65-78 g) and dry weight (24-30 g) of the shoot was observed across treatments compared to the control. In D. viscosa, at the time of harvest, the fresh and dry weights of the root and shoot showed a strong, significantly decreasing pattern across T1, T2, and T3, leading to the death of the plant at T3 and T4. Further, optimum ratio of waste soil to garden soil was found as 10:90 and 20:80 to establish the plantations of D. viscosa and C. erectus, respectively in areas where such solid waste from industries are disposed. Findings can be used for the restoration of such solid waste for the sustainable management of industrial areas and their associated ecosystems.
Asunto(s)
Residuos Industriales , Brotes de la Planta/crecimiento & desarrollo , Brotes de la Planta/metabolismo , Raíces de Plantas/crecimiento & desarrollo , Raíces de Plantas/metabolismo , Sapindaceae/crecimiento & desarrollo , Sapindaceae/metabolismo , Sapindaceae/fisiología , Iones/metabolismo , Biodegradación AmbientalRESUMEN
Arsenic (As)-bearing Fe(III) precipitate groundwater treatment sludge has traditionally been viewed by the water sector as a disposal issue rather than a resource opportunity, partly due to assumptions of the low value of As. However, As has now been classified as a Critical Raw Material (CRM) in many regions, providing new incentives to recover As and other useful components of the sludge, such as phosphate (P) and the reactive hydrous ferric oxide (HFO) sorbent. Here, we investigate alkali extraction to separate As from a variety of field and synthetic As-bearing HFO sludges, which is a critical first step to enable sludge upcycling. We found that As extraction was most effective using NaOH, with the As extraction efficiency increasing up to >99% with increasing NaOH concentrations (0.01, 0.1, and 1 M). Extraction with Na2CO3 and Ca(OH)2 was ineffective (<5%). Extraction time (hour, day, week) played a secondary role in As release but tended to be important at lower NaOH concentrations. Little difference in As extraction efficiency was observed for several key variables, including sludge aging time (50 days) and cosorbed oxyanions (e.g., Si, P). However, the presence of â¼10 mass% calcite decreased As release from field and synthetic sludges considerably (<70% As extracted). Concomitant with As release, alkali extraction promoted crystallization of poorly ordered HFO and decreased particle specific surface area, with structural modifications increasing with NaOH concentration and extraction time. Taken together, these results provide essential information to inform and optimize the design of resource recovery methods for As-bearing treatment sludge.
Asunto(s)
Álcalis , Arsénico , Agua Subterránea , Aguas del Alcantarillado , Aguas del Alcantarillado/química , Agua Subterránea/química , Álcalis/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Compuestos Férricos/químicaRESUMEN
The usage and disposal of highly abundant single-use and multilayered plastics contribute to significant ecological problems. The thermochemical recovery of these plastics to useful products and chemicals provides opportunity for positive economic and environmental impacts. Most previous research use idealised and unrepresentative feedstocks. To address this, various mixed waste plastics collected from the rejected fraction of a municipal waste recovery facility in Ghana were pyrolyzed at varying temperatures of 450, 500 and 550 °C and their yields compared. The obtained chemical products were analysed using several different techniques. Energy and carbon balances of the processes were produced using the CHNS and energy content of the oil fraction and the compositional results of the pyrolysis gas fraction, the latter of which was measured by Gas Chromatography Thermal Conductivity Detection (GC-TCD). The oils were further assessed via Gas Chromatography Mass Spectrometry (GC-MS) to identify the available valuable compounds. The formed oil contained approximately 40% light hydrocarbons (C6 - C11), 18% middle hydrocarbons (C11 - C16) and 42% heavy hydrocarbon compounds (C16+). The optimal oil yield of 65.9 ± 0.5% and low heating value of 44.7 ± 0.1 MJ/kg for single-use plastics were recorded at highest heating temperatures of 550 and 500 °C, respectively. The findings provide indication that pyrolysis is a fitting solution for energy recovery from waste plastics.
Asunto(s)
Hidrocarburos , Plásticos , Aceites , Calor , TemperaturaRESUMEN
As the volume of plastic in the environment increases, so too does human interactions with plastic pollution. Similarly, domestic, feral, and wild animals are increasingly interacting with plastic pollution, highlighting the potential for contamination of plastic wastes with animal faeces, urine, saliva, and blood. Substantial evidence indicates that once in the environment, plastics rapidly become colonised by microbial biofilm (the so-called 'plastisphere), which often includes potentially harmful microbial pathogens (including pathogens that are zoonotic in nature). Climate change, increased urbanisation, and the intensification of agriculture, mean that the three-way interactions between humans, animals, and plastic pollution are becoming more frequent, which is significant as almost 60% of emerging human infectious diseases during the last century have been zoonotic. Here, we critically review the potential for contaminated environmental plastics to facilitate the evolution of novel pathogenic strains of microorganisms, and the subsequent role of plastic pollution in the cyclical dissemination of zoonotic pathogens. As the interactions between humans, animals, and plastic pollution continues to grow, and the volume of plastics entering the environment increases, there is clearly an urgent need to better understand the role of plastic waste in facilitating zoonotic pathogen evolution and dissemination, and the effect this can have on environmental and human health.
Asunto(s)
Contaminación Ambiental , Plásticos , Animales , Humanos , Zoonosis/epidemiología , Agricultura , BiopelículasRESUMEN
The waste management and water purification are daunting environmental challenges. Biochar, a carbonaceous material prepared from diverse organic waste (agricultural, household residues and municipal sewage sludge) has garnered substantial attention due to its excellent attributes, including carbon content, cation exchange efficacy, ample specific surface area, and structural robustness. Thus, the present review comprehensively analyzes bio waste-derived biochar with a particular emphasis on water remediation applications. This article primarily delves into various strategies for modifying biochar, elucidating the underlying mechanisms behind these modifications and their potential for bolstering pollutant removal efficiency. Furthermore, it addresses the impact of functionalization on both biochar stability and cost for commercialization. Lastly, the article outlines key developments, SWOT analysis, and future prospects, offering insights into the practical execution of biochar applications at a larger scale. Therefore, this article paves the way for future research to deepen the understanding of modified biochar with mechanisms for exploring water remediation applications in a more sustainable manner.
Asunto(s)
Contaminantes Ambientales , Restauración y Remediación Ambiental , Administración de Residuos , Carbón Orgánico , Aguas del Alcantarillado , SueloRESUMEN
Global fossil resource utilisation remains a concern. Organic fuels and chemicals produced through catalytic synthesis out of biomass/waste feedstock can help reduce the share of fossil resource utilisation. In this study, a solid waste-derived producer gas from the cross/updraft sliding bed gasification process was applied in a fixed bed catalytic reactor with the goal of producing rich hydrocarbon chains. The specific producer gas with CO = 10%vol., H2 = 9%vol. and CH4 = 4%vol. was applied into the catalytic reactor along with catalysts Cat-Co or Cat-CoMnK at 15 bar pressure. Both catalysts were investigated in temperature regimes of 250, 280 and 310 °C, and the liquefaction number and hydrocarbon production were determined. The liquid products were qualitatively analysed afterwards, and the safety assessment, comprising the autoignition test, was performed. The obtained results defined an optimal operating temperature close to 280 °C a value for both catalysts. The individual hydrocarbon compounds were defined mostly by alkanes and alkenes of C10-C14 hydrocarbon groups in the case of both applied catalysts. The application of MnK-promoted catalyst resulted in the production of a significant amount of C6 hydrocarbon groups as well. The results point out a wide range of compounds utilisable in many different applications throughout the production sphere and suggest the possibility of autothermal air gasification of solid recovered fuel with the goal of producing gas for catalytic synthesis with reduced operation costs. From the safety point of view, the temperature of 227.7 °C was defined as the lowest value when autoignition occurs. This lowest temperature is relevant to the Cat-Co 280 °C synthesis scenario.
Asunto(s)
Hidrocarburos , Residuos Sólidos , Alcanos , Temperatura , Alquenos , Catálisis , BiomasaRESUMEN
The current study presents for the first time how recovered carbon black (rCB) obtained directly from the industrial-scale end-of-life tires (ELTs) pyrolysis sector is applied as a precursor for activated carbons (ACs) with application in CO2 capture. The rCB shows better physical characteristics, including density and carbon structure, as well as chemical properties, such as a consistent composition and low impurity concentration, in comparison to the pyrolytic char. Potassium hydroxide and air in combination with heat treatment (500-900 °C) were applied as agents for the conventional chemical and physical activation of the material. The ACs were tested for their potential to capture CO2. Ultimate and proximate analysis, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), Raman spectroscopy, thermogravimetric analysis (TGA), and N2/CO2 gas adsorption/desorption isotherms were used as material characterization methods. Analysis revealed that KOH-activated carbon at 900 °C (AC-900K) exhibited the highest surface area and a pore volume that increased 6 and 3 times compared to pristine rCB. Moreover, the AC-900K possessed a well-developed dual porosity, corresponding to the 22% and 78% of micropore and mesopore volume, respectively. At 0 °C and 25 °C, AC-900K also showed a CO2 adsorption capacity equal to 30.90 cm3/g and 20.53 cm3/g at 1 bar, along with stable cyclic regeneration after 10 cycles. The high dependence of CO2 uptake on the micropore volume at width below 0.7-0.8 nm was identified. The selectivity towards CO2 in relation to N2 reached high values of 350.91 (CO2/N2 binary mixture) and 59.70 (15% CO2/85% N2).
Asunto(s)
Carbón Orgánico , Hidróxidos , Compuestos de Potasio , Hollín , Carbón Orgánico/química , Dióxido de Carbono/química , Espectroscopía Infrarroja por Transformada de Fourier , Pirólisis , AdsorciónRESUMEN
The management of plastic waste (PW) has become an indispensable worldwide issue because of the enhanced accumulation and environmental impacts of these waste materials. Thermo-catalytic pyrolysis has been proposed as an emerging technology for the valorization of PW into value-added liquid fuels. This review provides a comprehensive investigation of the latest advances in thermo-catalytic pyrolysis of PW for liquid fuel generation, by emphasizing polyethylene, polypropylene, and polystyrene. To this end, the current strategies of PW management are summarized. The various parameters affecting the thermal pyrolysis of PW (e.g., temperature, residence time, heating rate, pyrolysis medium, and plastic type) are discussed, highlighting their significant influence on feed reactivity, product yield, and carbon number distribution of the pyrolysis process. Optimizing these parameters in the pyrolysis process can ensure highly efficient energy recovery from PW. In comparison with non-catalytic PW pyrolysis, catalytic pyrolysis of PW is considered by discussing mechanisms, reaction pathways, and the performance of various catalysts. It is established that the introduction of either acid or base catalysts shifts PW pyrolysis from the conventional free radical mechanism towards the carbonium ion mechanism, altering its kinetics and pathways. This review also provides an overview of PW pyrolysis practicality for scaling up by describing techno-economic challenges and opportunities, environmental considerations, and presenting future outlooks in this field. Overall, via investigation of the recent research findings, this paper offers valuable insights into the potential of thermo-catalytic pyrolysis as an emerging strategy for PW management and the production of liquid fuels, while also highlighting avenues for further exploration and development.
Asunto(s)
Poliestirenos , Pirólisis , Polienos , Polietileno , PlásticosRESUMEN
The present work demonstrates a novel strategy of synthesizing iron-biochar (Fe@BCSB) composite made with the waste iron bottle cap and sugar cane bagasse for implementation in the three-dimensional electro-Fenton (3DEF) process. The catalytic ability of the Fe@BCSB composite was explored to remediate the sodium dodecyl sulphate (SDS) surfactant from wastewater at neutral pH. At the optimum operating condition of Fe@BCSB dose of 1.0 g L-1, current density of 4.66 mA cm-2, and Na2SO4 dose of 50 mM, nearly 92.7 ± 3.1% of 20 mg L-1 of SDS abatement was attained during 120 min of electrolysis time. Moreover, the Fe@BCSB showed significant recyclability up to six cycles. Besides, other organics were successfully treated with more than 85% abatement efficiency in the proposed Fe@BCSB-supported 3DEF process. The total operating cost obtained during SDS treatment was around 0.31 US$ m-3 of wastewater. The phytotoxicity test revealed the positive impact of the 3DEF-treated effluent on the germination of the Vigna radiata. The electron paramagnetic resonance conveyed â¢OH as the prevailing reactive species for the oxidation of SDS in the 3DEF process. Further, about 81.3 ± 3.8% of SDS and 53.7 ± 4.1% of mineralization efficacy were acquired from the real institutional sewage.
Asunto(s)
Carbón Orgánico , Saccharum , Contaminantes Químicos del Agua , Hierro , Aguas Residuales , Celulosa , Dodecil Sulfato de Sodio , Electrodos , Peróxido de Hidrógeno , Oxidación-Reducción , Contaminantes Químicos del Agua/análisisRESUMEN
Polyethelene terephthalate (PET) is a well-known thermoplastic, and recycling PET waste is important for the natural environment and human health. This study provides a comprehensive overview of the recycling and reuse of PET waste through energy recovery and physical, chemical, and biological recycling. This article summarizes the recycling methods and the high-value products derived from PET waste, specifically detailing the research progress on regenerated PET prepared by the mechanical recycling of fiber/yarn, fabric, and composite materials, and introduces the application of PET nanofibers recycled by physical dissolution and electrospinning in fields such as filtration, adsorption, electronics, and antibacterial materials. This article explains the energy recovery of PET through thermal decomposition and comprehensively discusses various chemical recycling methods, including the reaction mechanisms, catalysts, conversion efficiencies, and reaction products, with a brief introduction to PET biodegradation using hydrolytic enzymes provided. The analysis and comparison of various recycling methods indicated that the mechanical recycling method yielded PET products with a wide range of applications in composite materials. Electrospinning is a highly promising recycling strategy for fabricating recycled PET nanofibers. Compared to other methods, physical recycling has advantages such as low cost, low energy consumption, high value, simple processing, and environmental friendliness, making it the preferred choice for the recycling and high-value utilization of waste PET.
Asunto(s)
Tereftalatos Polietilenos , Reciclaje , Tereftalatos Polietilenos/química , Reciclaje/métodos , Biodegradación AmbientalRESUMEN
This study aimed to evaluate effective treatment strategies for laboratory waste with an initial pH of 1.0, containing Cr6+, Mn2+, Co2+, Fe3+, Ni2+, Cu2+, Zn2+, Sr2+, Hg2+, and Pb2+ ions, focusing on flocculation, precipitation, and adsorption techniques. The study utilized microparticles derived from Moringa oleifera seed husks (MS), cryogels of carboxymethyl cellulose (CMC), and hybrid cryogels combining CMC and MS (CMC-MS25 and CMC-MS50) as adsorbents. The optimal strategy involved raising the pH to 7 using NH4OH, leading to the partial precipitation of metal ions. The remaining supernatant was then passed through columns packed with the aforementioned adsorbents. Utilizing CMC-MS25 and CMC-MS50 adsorbents resulted in the simultaneous removal of over 90% of the targeted metal ions. The adsorption of Cu2+ ions onto the adsorbents was facilitated by electrostatic interactions between Cu2+ ions and carboxylate groups, as well as Cu-OH chelation, as confirmed by X-ray photoelectron spectroscopy. Under optimized conditions, the fixed-bed column adsorption capacity was determined as 88.2 mg g-1. The CMC-MS25 adsorbents proved reusable at least 5 times, with the recovered Cu2+ ions potentially suitable for other processes. The scalability and feasibility of producing these novel adsorbents suggest a promising, cost-effective solution for treating complex matrices and recovering high-value metals, as copper.
Asunto(s)
Carboximetilcelulosa de Sodio , Moringa oleifera , Semillas , Carboximetilcelulosa de Sodio/química , Moringa oleifera/química , Semillas/química , Adsorción , Contaminantes Químicos del Agua/química , Metales Pesados/química , Metales/químicaRESUMEN
In developing economies, the decarbonization of energy sector has become a global priority for sustainable and cleaner energy system. Biohydrogen production from renewable sources of waste biomass is a good source of energy incentive that reduces the pollution. Biohydrogen has a high calorific value and emits no emissions, producing both energy security and environmental sustainability. Biohydrogen production technologies have become one of the main renewable sources of energy. The present paper entails the role of biohydrogen recovered from waste biomasses like agricultural waste (AW), organic fraction of municipal solid waste (OFMSW), food processing industrial waste (FPIW), and sewage sludge (SS) as a promising solution. The main sources of increasing yield percentage of biohydrogen generation from waste feedstock using different technologies, and process parameters are also emphasized in this review. The production paths for biohydrogen are presented in this review article, and because of advancements in R and D, biohydrogen has gained viability as a biofuel for the future and discusses potential applications in power generation, transportation, and industrial processes, emphasizing the versatility and potential for integration into existing energy infrastructure. The investigation of different biochemical technologies and methods for producing biohydrogen, including anaerobic digestion (AD), dark fermentation (DF), photo fermentation (PF), and integrated dark-photo fermentation (IDPF), has been overviewed. This analysis also discusses future research, investment, and sustainable energy options transitioning towards a low-carbon future, as well as potential problems, economic impediments, and policy-related issues with the deployment of biohydrogen in emerging nations.
Asunto(s)
Biocombustibles , Países en Desarrollo , Biocombustibles/análisis , Hidrógeno , Residuos Sólidos/análisisRESUMEN
This study explores the integration of fertilizer informatics into the circular economy, with a focus on enhancing nutrient recovery from anaerobic digestate. It utilizes advanced algorithms and data analytics to develop new nutrient management strategies essential for sustainable agriculture. This research provides a detailed assessment of current nutrient recovery technologies, evaluating their environmental impact, cost efficiency, and adaptability. Our findings highlight the importance of merging circular economy principles with fertilizer informatics, showcasing the potential for transforming waste into environmentally friendly fertilizers. This approach has significant implications for improving agricultural practices towards sustainability. The methodologies and insights presented are relevant for ongoing research in environmental stewardship and sustainable resource management. This study describes practical solutions and new perspectives, making it a valuable reference for future research.
Asunto(s)
Agricultura , Fertilizantes , Fertilizantes/análisis , Anaerobiosis , Agricultura/métodos , Ambiente , NutrientesRESUMEN
BACKGROUND: Refinement of surgical preference cards may reduce waste from surgery. This study aimed to characterize surgeon perceptions and practices regarding preference card maintenance, identify barriers to updating preference cards, and explore whether opinions on environmental stewardship relate to preference card maintenance. METHODS: This was a mixed methods survey performed at a single tertiary academic medical center. Surgeons completed questions on accuracy, frequency of updates, and perceived environmental impact of their preference cards. Responses were compared between early career and mid-to late-career surgeons using Kruskal-Wallis, chi-squared, and Fisher's exact tests. RESULTS: The response rate was 46.4% (n = 89/192). Among respondents, 46.1% (n = 41/89) rarely or never updated preference cards. Nearly all (98.9%, n = 87/88) said some of their cases had unused items on their cards. Most (87.6%, n = 78/89) made updates via verbal requests. Unfamiliar processes (83.7%, n = 72/86) and effort required (64.0%, n = 55/86) were viewed as barriers to card maintenance. Most agreed that more frequent updates would reduce waste (80.5%, n = 70/87), but respondents did not feel knowledgeable about the environmental impact of items on their cards (62.1%, n = 54/87). Mid-to late-career surgeons were less likely to update their cards annually or more often compared to early career surgeons (18.9%, n = 7/37 vs. 57.1%, n = 24/42, p < 0.001). No other responses varied significantly between early career and mid-to late-career surgeons. CONCLUSIONS: Surgeons acknowledged the utility of preference card maintenance in environmental stewardship, but unfamiliar systems and perceived effort hindered preference card review. Greater attention to preference card maintenance would promote environmentally sustainable practices in surgery.
RESUMEN
Plastic pollution has become a global problem since the extensive use of plastic in industries such as packaging, electronics, manufacturing and construction, healthcare, transportation, and others. This has resulted in an environmental burden that is continually growing, which has inspired many scientists as well as environmentalists to come up with creative solutions to deal with this problem. Numerous studies have been reviewed to determine practical, affordable, and environmentally friendly solutions to regulate plastic waste by leveraging microbes' innate abilities to naturally decompose polymers. Enzymatic breakdown of plastics has been proposed to serve this goal since the discovery of enzymes from microbial sources that truly interact with plastic in its naturalistic environment and because it is a much faster and more effective method than others. The scope of diverse microbes and associated enzymes in polymer breakdown is highlighted in the current review. The use of co-cultures or microbial consortium-based techniques for the improved breakdown of plastic products and the generation of high-value end products that may be utilized as prototypes of bioenergy sources is highlighted. The review also offers a thorough overview of the developments in the microbiological and enzymatic biological degradation of plastics, as well as several elements that impact this process for the survival of our planet.
Asunto(s)
Biodegradación Ambiental , Plásticos , Contaminación Ambiental/prevención & control , Bacterias/metabolismoRESUMEN
Understanding the new insight on conversion of organic waste into value-added products can improve the environmental activities driven by microorganisms and return the nutrients to environment and earth. Here, we comprehensively review the available knowledge on application of garbage enzyme (GE) for different environmental activities including waste activated sludge, composting process, landfill leachate treatment, soil remediation and wastewater treatment with special focus on their efficiency. To identify peer-reviewed studies published in English-language journals, a comprehensive search was performed across multiple electronic databases including Scopus, Web of Science, Pubmed, and Embase. The search was conducted systematically using relevant keywords. The eligible studies were analyzed to extract data and information pertaining to components of GE, fermentation process operational parameters, type of hydrolytic enzymes and improved environmental performance. The findings derived from this current review demonstrated that GE produced from the fruit and vegetable peels, molasses or brown sugar (carbon source), and water within fermentation process contain different hydrolytic enzymes in order to facilitate the organic waste degradation. Therefore, GE can be considered as a promising and efficient pathway in order to improve the environmental activities depended on microorganism including, composting, wastewater and leachate treatment and bioremediation process.
Asunto(s)
Biodegradación Ambiental , Enzimas , Residuos de Alimentos , Compostaje , Enzimas/metabolismo , Fermentación , Aguas del Alcantarillado/microbiología , Aguas Residuales/químicaRESUMEN
Waste-to-energy (WtE) technology is at the forefront of low-carbon municipal solid waste (MSW) treatment. MSW has been favoured by researchers in recent years due to its high potential to dispose of resources with WtE technology, which contributes to the carbon neutrality goal. However, there is a lack of research that integrates MSW WtE treatment from a global perspective and explores its future direction. Bibliometric methods are widely used because of their advantages in qualitative and quantitative literature information analysis. A comprehensive search was conducted in the Web of Science (WOS) Core Collection database, covering the period from 1990-2022, resulting in the collection of 702 articles. Subsequently, bibliometric software such as CiteSpace, VOSviewer, and Bibliometrix, were jointly employed for co-occurrence, co-citation, and cluster analyses, providing an in-depth qualitative and quantitative analysis of the research hotspots and development trends of WtE technology for MSW treatment. The research findings indicate a rapid growth in studies on carbon emission reduction through WtE technology for MSW treatment since 2015, with these related articles accounting for 50% of articles. Globally, China, the United States, Italy, and other countries were active research regions, with Chinese research institutions making the largest contributions. However, contributions from developing countries are limited. Furthermore, this study systematically elaborates on the research hotspots in this field. Finally, this study identified some frontier research hotspots and directions. Research on WtE technology primarily focuses on technological methods and policy management, particularly from the carbon neutrality perspective, emphasis WtE technology sustainability in reducing carbon emissions and achieving carbon neutrality goals. Promoting the use of assisted decision-making models in the MSW management process, and focusing on the conversion of food waste into valuable energy. It is hoped that these research directions will provide new ideas for the balanced and rapid development of WtE technology.
Asunto(s)
Eliminación de Residuos , Estados Unidos , Eliminación de Residuos/métodos , Carbono , Alimentos , Residuos Sólidos/análisis , BibliometríaRESUMEN
Waste management is one of the many major challenges faced by all urban cities around the world. With the increase in population, the current mechanisms for waste collection and disposal are under strain. The waste management problem is a global challenge that requires a collaborative effort from different stakeholders. Moreover, there is a need to develop technology-based solutions besides engaging the communities and establishing novel policies. While there are several challenges in waste management, the collection of waste using the current infrastructure is among the top challenges. Waste management suffers from issues such as a limited number of collection trucks, different types of household and industrial waste, and a low number of dumping points. The focus of this paper is on utilizing the available waste collection transportation capacity to efficiently dispose of the waste in a time-efficient manner while maximizing toxic waste disposal. A novel knapsack-based technique is proposed that fills the collection trucks with waste bins from different geographic locations by taking into account the amount of waste and toxicity in the bins using IoT sensors. Using the Knapsack technique, the collection trucks are loaded with waste bins up to their carrying capacity while maximizing their toxicity. The proposed model was implemented in MATLAB, and detailed simulation results show that the proposed technique outperforms other waste collection approaches. In particular, the amount of high-priority toxic waste collection was improved up to 47% using the proposed technique. Furthermore, the number of waste collection visits is reduced in the proposed scheme as compared to the conventional method, resulting in the recovery of the equipment cost in less than a year.
RESUMEN
In the context of construction and demolition waste exacerbating environmental pollution, the lack of recycling technology has hindered the green development of the industry. Previous studies have explored robot-based automated recycling methods, but their efficiency is limited by movement speed and detection range, so there is an urgent need to integrate drones into the recycling field to improve construction waste management efficiency. Preliminary investigations have shown that previous construction waste recognition techniques are ineffective when applied to UAVs and also lack a method to accurately convert waste locations in images to actual coordinates. Therefore, this study proposes a new method for autonomously labeling the location of construction waste using UAVs. Using images captured by UAVs, we compiled an image dataset and proposed a high-precision, long-range construction waste recognition algorithm. In addition, we proposed a method to convert the pixel positions of targets to actual positions. Finally, the study verified the effectiveness of the proposed method through experiments. Experimental results demonstrated that the approach proposed in this study enhanced the discernibility of computer vision algorithms towards small targets and high-frequency details within images. In a construction waste localization task using drones, involving high-resolution image recognition, the accuracy and recall were significantly improved by about 2% at speeds of up to 28 fps. The results of this study can guarantee the efficient application of drones to construction sites.