Neural cell responses to wear debris from metal-on-metal total disc replacements.

PURPOSE: Total disc replacements, comprising all-metal articulations, are compromised by wear and particle production. Metallic wear debris and ions trigger a range of biological responses including inflammation, genotoxicity, cytotoxicity, hypersensitivity and pseudotumour formation, therefore we hypothesise that, due to proximity to the spinal cord, glial cells may be adversely affected. METHODS: Clinically relevant cobalt chrome (CoCr) and stainless steel (SS) wear particles were generated using a six-station pin-on-plate wear simulator. The effects of metallic particles (0.5-50 µm3 debris per cell) and metal ions on glial cell viability, cellular activity (glial fibrillary acidic protein (GFAP) expression) and DNA integrity were investigated in 2D and 3D culture using live/dead, immunocytochemistry and a comet assay, respectively. RESULTS: CoCr wear particles and ions caused significant reductions in glial cell viability in both 2D and 3D culture systems. Stainless steel particles did not affect glial cell viability or astrocyte activation. In contrast, ions released from SS caused significant reductions in glial cell viability, an effect that was especially noticeable when astrocytes were cultured in isolation without microglia. DNA damage was observed in both cell types and with both biomaterials tested. CoCr wear particles had a dose-dependent effect on astrocyte activation, measured through expression of GFAP. CONCLUSIONS: The results from this study suggest that microglia influence the effects that metal particles have on astrocytes, that SS ions and particles play a role in the adverse effects observed and that SS is a less toxic biomaterial than CoCr alloy for use in spinal devices. These slides can be retrieved under Electronic Supplementary Material.

Hemiarthroplasties: the choice of prosthetic material causes different levels of damage in the articular cartilage.

BACKGROUND: Hemiarthroplasty has clear advantages over alternative procedures and is used in 20% of all shoulder joint replacements. Because of cartilage wear, the clinical outcome of hemiarthroplasty is unreliable and controversial. This paper suggests that the optimal choice of prosthetic material may reduce cartilage degeneration and improve the reliability of the procedure. The specific objectives were to assess 3 materials and assess how the severity of arthritis might affect the choice of prosthetic material. METHODS: A CoCr alloy, an AL2O3 ceramic, and a polycarbonate urethane polymer (PCU) were mechanically tested against 5 levels of human osteoarthritic cartilage (from intact to severely arthritic, n = 45). A high friction coefficient, a decrease in Young's modulus, an increase in permeability, a decrease in relaxation time, an increase in surface roughness, and a disrupted appearance of the cartilage after testing were used as measures of cartilage damage. The biomaterial that caused minimal cartilage damage was defined as superior. RESULTS: The CoCr caused the most damage. This was followed by the AL2O3 ceramic, whereas the PCU caused the least amount of damage. Although the degree of arthritis had an effect on the results, it did not change the trend that CoCr performed worst and PCU the best. DISCUSSION AND CONCLUSION: This study indicates that ceramic implants may be a better choice than metals, and the articulating surface should be as smooth as possible. Although our results indicate that the degree of arthritis should not affect the choice of prosthetic material, this suggestion needs to be further investigated.

Taper-Trunnion Interface Stress Varies Significantly With Head Size and Activity.

BACKGROUND: Total hip arthroplasty is performed with modular parts. Either a metal or ceramic ball is fastened to the trunnion of a femoral stem via a Morse taper. This implant scenario has been successful. However, recently larger (36 mm or greater) metal heads have become more popular as a means to reduce the incidence of hip joint dislocation. Today, a number of clinical failures have occurred due to mechanically assisted crevice corrosion at the head (taper) stem (trunnion) interface necessitating revision surgery. The objective of this research is to investigate how trunnion stress varies with head size, and how taper-trunnion geometric parameters including horizontal lever arm (HLA), taper engagement level, and a new parameter called trunnion load offset affect trunnion stresses. We hypothesized that trunnion stress may increase with increasing head size and HLA. METHODS: This hypothesis was tested by conducting finite element analysis of a titanium hip stem and 4 commercially available cobalt-chromium femoral heads subjected to 4 different moderate to severe physiological loading conditions. RESULTS: Results showed that trunnion stress increases with increasing head size, increased HLA, and trunnion load offset. It was also found that under certain load cases the trunnion stresses get exceptionally high, especially for the larger head sizes. CONCLUSION: This study suggests trying to avoid larger femoral head sizes that may result in higher implant stresses under certain loading conditions.

Off-resonance based assessment of metallic wear debris near total hip arthroplasty.

PURPOSE: The presence of metallic debris near total hip arthroplasty can have a significant impact on longitudinal patient management. Methods for magnetic resonance imaging-based quantification of metallic debris near painful total hip replacements are described and applied to cohorts of symptomatic and control subject cases. METHODS: A combination of metal artifact reduction, off-resonance mapping, off-resonance background removal, and spatial clustering methods are utilized to quantify off-resonance signatures in cases of suspected metallosis. These methods are applied to a cohort of symptomatic hip arthroplasties composed of cobalt-chromium alloys. Magnetostatic simulations and theoretical principles are used to illuminate the potential sources of the measured off-resonance effects. Reported metrics from histological tissue assays extracted during surgical revision procedures are also correlated with the proposed magnetic resonance imaging-based quantification results. RESULTS: The presented methods identified quantifiable metallosis signatures in more than 70% of the symptomatic and none of the control cases. Preliminary correlations of the MR data with direct histological evaluation of retrieved tissue samples indicate that the observed off-resonance effect may be related to tissue necrosis. CONCLUSIONS: Magnetostatic simulations, theoretical principles, and preliminary histological trends suggest that disassociated cobalt is the source of the observed off-resonance signature. Magn Reson Med 79:1628-1637, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

Outcomes of Revision Joint Arthroplasty Due to Metal Allergy and Hypersensitivity: A Systematic Review.

BACKGROUND: Lower extremity total joint arthroplasty (TJA) is one of the most successful orthopaedic procedures. However, it is estimated that as many as 10% to 20% of TJAs could fail due to various well-known causes. Furthermore, metal allergy-related complications have recently gained attention as one of the potential causes of failure when the common reasons have been excluded. Reported symptoms from metal allergy can include chronic eczema, joint effusions, joint pain, and limited range of motion. Few studies have explored the outcomes of patients undergoing revisions due to allergic complications. The aim of our study is to quantitatively evaluate the outcomes of revision joint arthroplasty due to metal allergy and hypersensitivity.

Differential Effect of Cobalt and Chromium Ions as Well as CoCr Particles on the Expression of Osteogenic Markers and Osteoblast Function.

The balance of bone formation and resorption is the result of a regulated crosstalk between osteoblasts, osteoclasts, and osteocytes. Inflammation, mechanical load, and external stimuli modulate this system. Exposure of bone cells to metal ions or wear particles are thought to cause osteolysis via activation of osteoclasts and inhibition of osteoblast activity. Co2+ ions have been shown to impair osteoblast function and the expression of the three transforming growth factor (TGF)-ß isoforms. The current study was performed to analyze how Co2+ and Cr3+ influence the expression, proliferation, and migration profile of osteoblast-like cells. The influence of Co2+, Cr3+, and CoCr particles on gene expression was analyzed using an osteogenesis PCR Array. The expression of different members of the TGF-ß signaling cascade were down-regulated by Co2+, as well as several TGF-ß regulated collagens, however, Cr3+ had no effect. CoCr particles partially affected similar genes as the Co2+treatment. Total collagen production of Co2+ treated osteoblasts was reduced, which can be explained by the reduced expression levels of various collagens. While proliferation of MG63 cells appears unaffected by Co2+, the migration capacity was impaired. Our data may improve the knowledge of changes in gene expression patterns, and the proliferation and migration effects caused by artificial materials.

Surface Microstructural Changes and Release of Ions from Dental Metal Alloy Removable Prostheses in Patients Suffering from Acid Reflux.

PURPOSE: To investigate the surface microstructural changes and the release of ions from metal alloys used in removable dental prostheses and the potential effects of acidic reflux found in patients suffering from gastroesophageal reflux disease (GERD). MATERIALS AND METHODS: Thirty-seven (37) patients were recruited. Data were gathered through a questionnaire and clinical examination. Samples of metal alloy from the dentures and patient's saliva were collected. GERD was confirmed using the GerdQ questionnaire. Denture samples were characterized using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), while salivary samples were tested for trace metal ions using inductively coupled plasma (ICP). RESULTS: Characterization of denture samples revealed the presence of nickel, cobalt, and chromium. Nickel-chromium exhibited an etched surface appearance, while cobalt-chromium exhibited no noticeable surface microstructural changes. Higher mean salivary levels of chromium and cobalt in patients wearing any metal alloy-based denture and of chromium and nickel in patients wearing Ni-Cr prostheses were found to be significant. No differences were found in salivary metal ion levels of patients suffering from GERD. CONCLUSIONS: Nickel-chromium alloy is prone to acid etching in the oral cavity, while cobalt-chromium alloy appears to be more resistant. Cobalt, chromium, and nickel are leached in saliva of patients using cast removable prostheses. The impact of gastric acid on metal ion release from dental metal alloys deserves further investigations. CLINICAL SIGNIFICANCE: This preliminary study suggests that metal-based removable prostheses leach trace metal ions in saliva. Nickel-chromium-based dentures exhibit an etched appearance unrelated to GERD.

Metallosis in a Dog as a Long-Term Complication Following Total Hip Arthroplasty.

Metallosis is the accumulation of metallic debris in soft tissues resulting from wear following total joint replacement. A dog was evaluated for lameness 4 years after total hip arthroplasty using a titanium alloy and cobalt chromium total hip system. Radiographs revealed severe acetabular component wear, implant-bone interface deterioration, and peri-acetabular osteolysis. During surgical revision, black periarticular tissue surrounded the implants. Histologically, there was fibrosis and granulomatous inflammation with abundant, intra- and extracellular, black, granular material and smaller amounts of clear punctate to acicular material. Laser capture microdissection followed by x-ray fluorescence microscopy indicated the material contained large amounts of titanium with smaller amounts of vanadium, cobalt, and chromium, confirming the diagnosis of metallosis. The clear material was birefringent under cross-polarized light, stained positive with Oil-Red-O, and thus was consistent with polyethylene. Metallosis exhibits characteristic gross and histologic lesions and is a differential diagnosis for aseptic loosening of hip implants.

Metal allergy to everolimus-eluting cobalt chromium stents confirmed by positive skin testing as a cause of recurrent multivessel in-stent restenosis.

A 54-year-old woman treated with cobalt-chromium everolimus eluting stents (CoCr-EES) for her left distal circumflex and diagonal branch lesions suffered from repeated in-stent restenosis in both lesions. Neointimal proliferation occurred rapidly and almost simultaneously in the two lesions. The cause was established to be metal allergy, as determined by patch tests which were strongly positive for bare metal stents and weakly positive for CoCr-EES. Following the third successive angioplasty, we initiated treatment with prednisolone (30 mg daily) and the anti-allergic and anti-proliferative drug tranilast (300 mg daily). An elective angiogram performed 3 months later showed no evidence of in-stent restenosis in any of the stented lesions. Furthermore, the patient has remained angina-free for 15 months. The unique features of this case include: (1) near-simultaneous repeated multivessel in-stent restenosis in a patient with skin test-documented metal allergy to cobalt-chromium stents; (2) adjunctive systemic medical therapy with prednisolone and tranilast appeared to terminate the malignant restenotic cycle.

Cobalt-Chromium Metallosis With Normal Electroretinogram.

BACKGROUND: Ocular cobalt toxicity is a rare phenomenon reported with increased frequency due to the rise of cobalt-chromium metal hip implants. We report the case of a 66-year-old previously healthy man who developed decreased vision due to cobalt-chromium toxicity from a metal-on-metal hip arthroplasty. Our objective was to determine whether the origin of his visual loss was due to toxicity of the optic nerve, of the retina, or of both. METHODS: Ocular examination, 10-2 SITA-Standard Humphrey Visual Field (VF), standard full-field electroretinogram (ERG) as indicated by the International Society for Clinical Electrophysiology of Vision (ISCEV), multifocal electroretinogram (mfERG), multifocal visual evoked potentials (mfVEP), and optical coherence tomography (OCT) were conducted. RESULTS: Ocular examination revealed decreased visual acuity, poor color vision, normal funduscopy, and cecocentral scotomas on VF testing. Because his right eye was amblyopic since childhood, test results from only the left eye are shown. Electrophysiology studies revealed an ISCEV standard full-field ERG with photopic and scotopic responses within normal limits, mfERG with amplitudes and latencies within normal limits, and mfVEP with latencies within normal limits, but with decreased central amplitudes. Peripapillary and macular OCT showed retinal nerve fiber layer and retinal ganglion cell-inner plexiform layer thickness within normal limits. CONCLUSION: Because decreased color vision and cecocentral scotoma on 10-2 VF are most consistent with toxic optic neuropathy, and decreased central amplitudes on mfVEP are suggestive of neural dysfunction, we hypothesize that our patient presented with an early stage of optic nerve toxicity that was not yet apparent as a structural abnormality on OCT.

Cause-specific mortality in Finnish ferrochromium and stainless steel production workers.

BACKGROUND: Although stainless steel has been produced for more than a hundred years, exposure-related mortality data for production workers are limited. AIMS: To describe cause-specific mortality in Finnish ferrochromium and stainless steel workers. METHODS: We studied Finnish stainless steel production chain workers employed between 1967 and 2004, from chromite mining to cold rolling of stainless steel, divided into sub-cohorts by production units with specific exposure patterns. We obtained causes of death for the years 1971-2012 from Statistics Finland. We calculated standardized mortality ratios (SMRs) as ratios of observed and expected numbers of deaths based on population mortality rates of the same region. RESULTS: Among 8088 workers studied, overall mortality was significantly decreased (SMR 0.77; 95% confidence interval [CI] 0.70-0.84), largely due to low mortality from diseases of the circulatory system (SMR 0.71; 95% CI 0.61-0.81). In chromite mine, stainless steel melting shop and metallurgical laboratory workers, the SMR for circulatory disease was below 0.4 (SMR 0.33; 95% CI 0.07-0.95, SMR 0.22; 95% CI 0.05-0.65 and SMR 0.16; 95% CI 0.00-0.90, respectively). Mortality from accidents (SMR 0.84; 95% CI 0.67-1.04) and suicides (SMR 0.72; 95% CI 0.56-0.91) was also lower than in the reference population. CONCLUSIONS: Working in the Finnish ferrochromium and stainless steel industry appears not to be associated with increased mortality.

Chromium allergy and dermatitis: prevalence and main findings.

The history of chromium as an allergen goes back more than a century, and includes an interventional success with national legislation that led to significant changes in the epidemiology of chromium allergy in construction workers. The 2015 EU Leather Regulation once again put a focus on chromium allergy, emphasizing that the investigation of chromium allergy is still far from complete. Our review article on chromium focuses on the allergen's chemical properties, its potential exposure sources, and the allergen's interaction with the skin, and also provides an overview of the regulations, and analyses the epidemiological pattern between nations and across continents. We provide an update on the allergen from a dermatological point of view, and conclude that much still remains to be discovered about the allergen, and that continued surveillance of exposure sources and prevalence rates is necessary.

The concentrations of IL-8 and IL-6 in gingival crevicular fluid during nickel-chromium alloy porcelain crown restoration.

We explored gum irritation and cytotoxicity caused by nickel-chromium (Ni-Cr) alloy porcelain by interleukin-8 (IL-8), interleukin-6 (IL-6) and gingival crevicular fluid (GCF) volumes at different time points peri-crown restoration. This prospective study was conducted in 60 young adults. The total amount and concentrations of IL-8 and IL-6 per site, GCF volumes, and blood neutrophil counts were performed prior to and at 1 week, 3 months, and 6 months after Ni-Cr alloy-porcelain crown restoration. Thirty male and 30 female subjects, aged 20-35 years old were enrolled. The total amount and concentrations of IL-8 and IL-6 per site, GCF volumes increased after nickel-chromium (Ni-Cr) alloy-porcelain crown restoration, and reached its peak at the third month as the GCF volume increased by 52.20 %, the total amount and concentrations of IL-8 increased by 112.11 and 22.75 %; the total amount and concentrations of IL-6 increased by 77.66 and 17.17 % when compared to baseline. In particular, the increase of IL-8 concentration was found in female patients at 3 months after restoration; while the neutrophil count of the peripheral blood did not change significantly. The increase in the total amount and the concentrations of IL-8 and IL-6 and GCF volume may be related to the cytotoxicity induced by Ni-Cr alloy. The significant increase of IL-8 concentration in females indicates that more attention should be given to women during Ni-Cr alloy porcelain crown restoration.

No allergic reaction after TKA in a chrome-cobalt-nickel-sensitive patient: case report and review of the literature.

Hypersensitivity to metallic implants remains relatively unpredictable and poorly understood. Although 20-25 % of total joint arthroplasty patients develop metal sensitivity, only a few highly susceptible persons (<1 %) exhibit symptoms. We present a case report of a fifty-two-year-old woman with a preoperatively documented metal allergy who underwent bilateral total knee arthroplasty using a titanium-niobium-coated implant on one side and a chrome-cobalt implant on the other side because of a logistics problem. At 2-year follow-up, no clinical symptoms of allergy or loosening of the implant were observed. Level of evidence IV.

Abrasive wear and metallosis associated with cross-linked polyethylene in total hip arthroplasty.

A 34-year-old female patient received a cobalt-chromium (CoCr) alloy femoral head on cross-linked polyethylene total hip replacement for the revision of her fractured ceramic-on-ceramic total hip replacement. The CoCr alloy femoral head became severely worn due to third-body abrasive wear by ceramic particles that could not be removed by synovectomy or irrigation at revision surgery. Ceramic particles were found embedded in the cross-linked polyethylene liner. The CoCr alloy femoral head exhibited a total mass loss of 14.2 g and the generated wear particles triggered metallosis in the patient. The present case study suggests not revising a fractured ceramic-on-ceramic total hip replacement with a CoCr alloy femoral head and a cross-linked polyethylene liner to avoid metallosis due to third-body abrasive wear.

Alternative bearings in total knee arthroplasty: risk of early revision compared to traditional bearings: an analysis of 62,177 primary cases.

BACKGROUND AND PURPOSE: There is no substantial clinical evidence for the superiority of alternative bearings in total knee arthroplasty (TKA). We compared the short-term revision risk in alternative surface bearing knees (oxidized zirconium (OZ) femoral implants or highly crosslinked polyethylene (HXLPE) inserts) with that for traditional bearings (cobalt-chromium (CoCR) on conventional polyethelene (CPE)). The risk of revision with commercially available HXLPE inserts was also evaluated. METHODS: All 62,177 primary TKA cases registered in a Total Joint Replacement Registry between April 2001 and December 2010 were retrospectively analyzed. The endpoints for the analysis were all-cause revisions, septic revisions, or aseptic revisions. Bearing surfaces were categorized as OZ-CPE, CoCr-HXLPE, or CoCr-CPE. HXLPE inserts were stratified according to brand name. Confounding was addressed using propensity score weights. Marginal Cox-regression models adjusting for surgeon clustering were used. RESULTS: The proportion of females was 62%. Average age was 68 (SD 9.3) years, and median follow-up time was 2.8 (IQR 1.2-4.9) years. After adjustments, the risks of all-cause, aseptic, and septic revision with CoCr-HXLPE and OZ-CPE bearings were not statistically significantly higher than with traditional CoCr-CPE bearings. No specific brand of HXLPE insert was associated with a higher risk of all-cause, aseptic, or septic revision compared to CoCr-CPE. INTERPRETATION: At least in the short term, none of the alternative knee bearings evaluated (CoCr-HXLPE or OZ-CPE) had a greater risk of all-cause, aseptic, and septic revision than traditional CoCr-CPE bearings.

Genotoxicity of fixation devices analyzed by the frequencies of sister chromatid exchange.

BACKGROUND: Metal alloys utilized in the management of jaw fractures may exert genotoxic effects. Our purpose was to compare the genotoxicity of intermaxillary fixation devices containing nickel and chromium to that of titanium miniplates utilized in treatment of jaw fractures through the analysis of sister chromatid exchange. METHODS: In this prospective study, in a total of 28 non-smoker patients (10 females, 18 males; mean age 33.43±10.76; range 15 to 60 years) with jaw fractures, 14 were treated with intermaxillary fixation by administration of nickel-chromium wire and arch bar and 14 with titanium miniplates to investigate the genotoxicity of different metal alloys. The outcome variable was the frequency of sister chromatide exchange in peripheral lymphoctyes, determined through the analysis of venous blood samples obtained preoperatively and 4 to 6 weeks postoperatively. RESULTS: The frequency of the average sister chromatid exchange was found to be significantly higher in patients treated with the nickel-chromium intermaxillary fixation devices than those treated by titanium miniplates (1.29±0.29 vs. 0.46±0.39, p<0.001). CONCLUSION: Although titanium miniplate osteosynthesis is an invasive technique in comparison with the nickel-chromium-containing intermaxillary fixation devices, titanium seems to exert less genotoxic effect than the nickel-chromium alloy. However, this finding should be supported in clinical studies with a larger sampling size.

Quantifying subtle but persistent peri-spine inflammation in vivo to submicron cobalt-chromium alloy particles.

PURPOSE: We evaluated the consequences of cobalt-chromium alloy (CoCr) wear debris challenge in the peri-spine region to determine the inflammation and toxicity associated with submicron particulates of CoCr-alloy and nickel on the peri-spine. METHODS: The lumbar epidural spaces of (n = 50) New Zealand white rabbits were challenged with: 2.5 mg CoCr, 5.0 mg CoCr, 10.0 mg CoCr, a positive control (20.0 mg of nickel) and a negative control (ISOVUE-M-300). The CoCr-alloy and Ni particles had a mean diameter of 0.2 and 0.6 µm, respectively. Five rabbits per dose group were studied at 12 and 24 weeks. Local and distant tissues were analyzed histologically and quantitatively analyzed immunohistochemically (TNF-α and IL-6). RESULTS: Histologically, wear particles were observed in all animals. There was no evidence of toxicity or local irritation noted during macroscopic observations in any CoCr-dosed animals. However, Ni-treated control animals experienced bilateral hind leg paralysis and were euthanized at Day 2. Histopathology of the Ni particle-treated group revealed severe neuropathy. Quantitative immunohistochemistry demonstrated a CoCr-alloy dose-dependent increase in cytokines (IL-6, TNF-α, p < 0.05) at 12 and 24 weeks. CONCLUSIONS: Subtle peri-spine inflammation associated with CoCr-alloy implant particles was dose dependent and persistent. Neuropathy can be induced by highly reactive Ni particles. This suggests peri-spine challenge with CoCr-alloy implant debris (e.g., TDA) is consistent with past reports using titanium alloy particles, i.e., mild persistent inflammation.

The risk of all-cause mortality, heart outcomes, cancer, and neurodegenerative disorders with cobalt-chrome-containing total hip arthroplasty implants : an analysis of the National Joint Registry.

AIMS: A recent report from France suggested an association between the use of cobalt-chrome (CoCr) femoral heads in total hip arthroplasties (THAs) and an increased risk of dilated cardiomyopathy and heart failure. CoCr is a commonly used material in orthopaedic implants. If the reported association is causal, the consequences would be significant given the millions of joint arthroplasties and other orthopaedic procedures in which CoCr is used annually. We examined whether CoCr-containing THAs were associated with an increased risk of all-cause mortality, heart outcomes, cancer, and neurodegenerative disorders in a large national database. METHODS: Data from the National Joint Registry was linked to NHS English hospital inpatient episodes for 374,359 primary THAs with up to 14.5 years' follow-up. We excluded any patients with bilateral THAs, knee arthroplasties, indications other than osteoarthritis, aged under 55 years, and diagnosis of one or more outcome of interest before THA. Implants were grouped as either containing CoCr or not containing CoCr. The association between implant construct and the risk of all-cause mortality and incident heart failure, cancer, and neurodegenerative disorders was examined. RESULTS: There were 158,677 individuals (42.4%) with an implant containing CoCr. There were 47,963 deaths, 27,332 heart outcomes, 35,720 cancers, and 22,025 neurodegenerative disorders. There was no evidence of an association between patients with CoCr implants and higher rates of any of the outcomes. CONCLUSION: CoCr-containing THAs did not have an increased risk of all-cause mortality, or clinically meaningful heart outcomes, cancer, or neurodegenerative disorders into the second decade post-implantation. Our findings will help reassure clinicians and the increasing number of patients receiving primary THA worldwide that the use of CoCr-containing implants is not associated with significant adverse systemic effects. Cite this article: Bone Joint J 2022;104-B(3):359-367.

Posterior condyle surface damage on retrieved femoral knee components.

Twenty-two retrieved femoral knee components were identified with posterior condyle surface damage on average at 99° flexion (range, 43°-135° flexion). Titanium alloy material transfer and abrasive surface damage were evident on cobalt-chromium alloy femoral components that were in contact with titanium alloy tibial trays. Surface damage on the retrieved Oxinium femoral components (Smith and Nephew, Inc, Memphis, Tenn) that were in contact with titanium alloy tibial trays showed gouging, associated with the removal and cracking of the oxide and exposure of the zirconium-niobium alloy substrate. Cobalt-chromium alloy femoral components that were in contact with cobalt-chromium alloy tibial trays showed abrasive wear. Contact between the femoral component and tibial tray should be avoided to prevent surface damage to the femoral condyles, which could potentially accelerate polyethylene wear in vivo.