Simultaneous removal of dissolved organic matter and bromide from drinking water source by anion exchange resins for controlling disinfection by-products.

Anion exchange resins (AERs) with different properties were evaluated for their ability to remove dissolved organic matter (DOM) and bromide, and to reduce disinfection by-product (DBP) formation potentials of water collected from a eutrophic surface water source in Japan. DOM and bromide were simultaneously removed by all selected AERs in batch adsorption experiments. A polyacrylic magnetic ion exchange resin (MIEX®) showed faster dissolved organic carbon (DOC) removal than other AERs because it had the smallest resin bead size. Aromatic DOM fractions with molecular weight larger than 1600 Da and fluorescent organic fractions of fulvic acid- and humic acid-like compounds were efficiently removed by all AERs. Polystyrene AERs were more effective in bromide removal than polyacrylic AERs. This result implied that the properties of AERs, i.e. material and resin size, influenced not only DOM removal but also bromide removal efficiency. MIEX® showed significant chlorinated DBP removal because it had the highest DOC removal within 30 min, whereas polystyrene AERs efficiently removed brominated DBPs, especially brominated trihalomethane species. The results suggested that, depending on source water DOM and bromide concentration, selecting a suitable AER is a key factor in effective control of chlorinated and brominated DBPs in drinking water.

Anxiolytic-like effect of brominated compounds from the marine sponge Aplysina fulva on adult zebrafish (Danio rerio): Involvement of the GABAergic system.

Benzodiazepines are commonly used to treat disorders of the central nervous system, including anxiety. However, due to their adverse effects, there is a continuing interest in discovering new safe and effective drugs. Marine natural products have emerged as a prolific source of bioactive nitrogenated compounds. Aiming to discover new biologically active natural compounds, the marine sponge Aplysina fulva, a nitrogen-bearing heterocyst producer, was investigated. The main isolated compounds (4, 6, and 9) were evaluated on adult zebrafish (Danio rerio). A group of fishes (n = 6) was preliminarily subjected to acute toxicity, and open field tests using 0.1, 0.5, and 1.0 mg/mL (v. o.) of those compounds was performed. The anxiolytic effect was further investigated in the light/dark assay based on the locomotor response at zebrafish. Interactions through the GABAergic system were investigated using flumazenil, a silent modulator of GABA receptors. To improve the results, a study of molecular docking using the GABAA receptor also was performed. Based on the results, the bromotyrosine derivative compounds 4, 6, and 9 exhibited anxiolytic-like effects mediated by the GABAergic system.

Bromide and iodide selectivity in membrane capacitive deionisation, and its potential application to reduce the formation of disinfection by-products in water treatment.

The formation of toxic disinfection by-products during water disinfection due to the presence of bromide and iodide is a major concern. Current treatment technologies such as membrane, adsorption and electrochemical processes have been known to have limitations such as high energy demand and excessive chemical use. In this study, the selectivity between bromide and iodide, and their removal in membrane capacitive deionisation (MCDI) was evaluated. The results showed that iodide was more selectively removed over bromide from several binary feed waters containing bromide and iodide under various initial concentrations and applied voltages. Even in the presence of significant background concentration of sodium chloride, definite selectivity of iodide over bromide was observed. The high partial-charge transfer coefficient of iodide compared to bromide could be a feasible explanation for high iodide selectivity since both bromide and iodide have similar ionic charge and hydrated radius. The result also shows that MCDI can be a potential alternative for the removal of bromide and iodide during water treatment.

Gemini surfactant: A novel flotation collector for harvesting of microalgae by froth flotation.

Froth flotation has been proved to be a promising approach for commercial scale harvesting of microalgae. However, all the surfactants used in the microalgae flotation harvesting process are conventional monomeric surfactants contain a single similar hydrophobic group in the molecule, which results in a low harvesting efficiency. In this work, a novel Gemini surfactant, N,N'-bis(cetyldimethyl)-1,4-butane diammonium dibromide (BCBD) was prepared, and originally recommended as a collector for froth flotation harvesting of Chlorella vulgaris from culture medium. The performance of BCBD was compared with the results acquired using its conventional monomeric surfactant cetyl trimethyl ammonium bromide (CTAB). The bench-scale flotation results showed that BCBD had excellent collecting power for Chlorella vulgaris. Achieving the obviously superior flotation harvesting performance (flotation recovery increased by 21.4% and enrichment ratio increased by 22.9), the dosage of Gemini type BCBD collector is five times less than that of monomeric CTAB collector.

Bromide ion removal from contaminated water by calcined and uncalcined MgAl-CO3 layered double hydroxides.

A fundamental investigation on the uptake of bromide ion from contaminated water by calcined and uncalcined MgAl-CO3 layered double hydroxides (LDHs) were conducted in batch mode. The uptake capacity of calcined LDHs (CLDH) is higher than that of uncalcined LDHs, due to their different mechanisms which are confirmed by powder X-ray diffraction, FT-IR spectroscopy and TG-MS measurements. The former mechanism is based on the reconstruction of CLDH to Br-LDHs, whilst the latter is related to the surface adsorption. It has been found that the LDHs calcined at 500 degrees C with Mg/Al molar ratio of 4 represents the highest capacity to remove bromide ion from aqueous solution. The equilibrium isotherms of uptake of bromide by CLDH were well fitted by the Langmuir equation, and thermodynamic parameters such as Delta G0, Delta H0 and Delta S0 were calculated from Langmuir constants. The negative value of Delta H0 confirms the exothermic nature of adsorption. Three kinetics models were used to fit the kinetics experimental data, and it was found that the pseudo-second order kinetics model could be used to describe the uptake process appropriately. The value of Ea was calculated to be 79.9 kJ/mol, which suggests that the process of uptake bromide is controlled by the reaction rate of bromide with the CLDH rather than diffusion.

Ag-doped carbon aerogels for removing halide ions in water treatment.

The objective of this study was to analyze the efficiency of silver(Ag)-doped carbon aerogels for the removal of bromide (Br(-)) and iodide (I(-)) from drinking waters. Textural characterization of Ag-doped aerogels showed that an increase in the Ag dose added during the preparation process produced: (i) a reduction in the surface area (S(BET)) and (ii) an increase in mesopore (V(2)) and macropore (V(3)) volumes. Chemical characterization of the materials revealed an acidic surface (pH of point of zero charge, pH(PZC)=4.5, O(surface)=20%). The oxidation state of Ag was +1 and the surface concentration of this element ranged from 4% to 10%. The adsorption capacity (X(m)) and affinity of adsorbent (BX(m)) increased with a reduction in the radius of the halogenide. Furthermore, an increase in the adsorption capacity was observed with higher Ag concentrations on the aerogel surface. The high adsorption capacity of the aerogel may be due to the presence of Ag(I) on its surface, with the formation of the corresponding Ag halides. Our observations indicate that the halogenides adsorption on commercial activated carbon (Sorbo-Norit) is much lower than that of the Ag-doped carbon aerogels. The presence of chloride and natural organic matter (NOM) in the medium reduced the adsorption capacity of Br(-) and I(-) on Ag carbon aerogels.

Removal of bromide by aluminium chloride coagulant in the presence of humic acid.

Bromide can form disinfection by-products (DBPs) in drinking water disinfection process, which have adverse effects on human health. Using aluminium chloride as a model coagulant, removal of bromide by coagulation was investigated in the absence or presence of humic acid (HA) in synthetic water and then was conducted in raw water. Results demonstrated that in synthetic water, 93.3-99.2% removal efficiency of bromide was achieved in the absence of HA with 3-15 mg/L coagulant, while 78.4-98.4% removal efficiency of bromide was obtained in the presence of HA with the same coagulant dosage and 86.8-98.8% HA was removed simultaneously. Bromide in raw water was removed 87.0% with 15 mg/L coagulant. HA apparently reduced the removal of bromide with low coagulant dosage or at high pH, while minor influence on removal of bromide was observed with high coagulant dosage or at low pH. Thus, bromide could be reduced effectively by enhanced coagulation in drinking water treatment.

A comparative study of void volume markers in immobilized-artificial-membrane and reversed-phase liquid chromatography.

A comparative study of 10 void volume marker candidates on C(8), C(18), and IAM columns was described under several pH (3.0, 4.8, and 7.3) buffer conditions. Pycnometric analysis has been performed on the columns for comparison. In acidic conditions, small organic carboxylic acids suggested by the manufacturer did not necessarily give reliable and consistent estimates of the void volume for IAM column. However, changes in temperature and organic modifier composition led to small and predictable effects. The results presented here provide minimal but practical guidelines for the use of void volume markers in IAM chromatography.

Removal of bromide and iodide anions from drinking water by silver-activated carbon aerogels.

The aim of this study is to analyze the use of Ag-doped activated carbon aerogels for bromide and iodide removal from drinking water and to study how the activation of Ag-doped aerogels affects their behavior. It has been observed that the carbonization treatment and activation process of Ag-doped aerogels increased the surface area value ( [Formula: see text] ), whereas the volume of meso-(V(2)) and macropores (V(3)) decreased slightly. Chemical characterization of the materials revealed that carbonization and especially activation process considerably increased the surface basicity of the sample. Original sample (A) presented acidic surface properties (pH(PZC)=4.5) with 21% surface oxygen, whereas the sample that underwent activation showed mainly basic surface chemical properties (pH(PZC)=9.5) with only 6% of surface oxygen. Carbonization and especially, activation process considerable increased the adsorption capacity of bromide and iodide ions. This would mainly be produced by (i) an increase in the microporosity of the sample, which increases Ag-adsorption sites available to halide anions, and (ii) a rise of the basicity of the sample, which produces an increase in attractive electrostatic interactions between the aerogel surface, positively charged at the working pH (pH(solution)

Bromine and bromide content in soils: Analytical approach from total reflection X-ray fluorescence spectrometry.

Monitoring total bromine and bromide concentrations in soils is significant in many environmental studies. Thus fast analytical methodologies that entail simple sample preparation and low-cost analyses are desired. In the present work, the possibilities and drawbacks of low-power total reflection X-ray fluorescence spectrometry (TXRF) for the determination of total bromine and bromide contents in soils were evaluated. The direct analysis of a solid suspension using 20 mg of fine ground soil (<63 µm) gave a 3.7 mg kg(-1) limit of detection for bromine which, in most cases, was suitable for monitoring total bromine content in soils (Br content range in soils = 5-40 mg kg(-1)). Information about bromide determination in soils is also possible by analyzing the Br content in water soil extracts. In this case, the TXRF analysis can be directly performed by depositing 10 µL of the internal standardized soil extract sample on a quartz glass reflector in a measuring time of 1500 s. The bromide limit of detection by this approach was 10 µg L(-1). Good agreement was obtained between the TXRF results for the total bromine and bromide determinations in soils and those obtained by other popular analytical techniques, e.g. energy dispersive X-ray fluorescence spectrometry (total bromine) and ionic chromatography (bromide). As a study case, the TXRF method was applied to study bromine accumulation in two agricultural soils fumigated with a methyl bromide pesticide and irrigated with regenerated waste water.

Bench-scale testing of a magnetic ion exchange resin for removal of disinfection by-product precursors.

The objective of this research was to compare enhanced coagulation with anion exchange for removal of disinfection by-product (DBP) precursors (i.e. natural organic matter (NOM) and bromide). Treatment with a magnetic ion exchange resin (MIEX((R))) was the primary focus of this study. Raw waters from four utilities in California were evaluated. The waters had low turbidity, low to moderate organic carbon concentrations, a wide range of alkalinities, and moderate to high bromide ion concentrations. The treated waters were compared based on removal of ultraviolet (UV) absorbance, dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), and haloacetic acid formation potential (HAAFP). The results indicated that treatment with MIEX is more effective than coagulation at removing UV-absorbing substances and DOC. Treatment with MIEX and treatment with MIEX followed by coagulation yielded similar results, suggesting that coagulation of MIEX-treated water does not provide additional removal of organic carbon. MIEX treatment reduced the THMFP and HAAFP in all waters, and did so to a greater extent than coagulation. Treatment with MIEX was most effective in raw waters having a high specific UV absorbance and a low anionic strength. Following MIEX treatment, subsequent chlorination resulted in a shift to the more brominated THM and HAA species as compared to chlorination of the raw water. MIEX also removed bromide to varying degrees, depending on the raw water alkalinity and initial bromide ion concentration.

Performance of selected anion exchange resins for the treatment of a high DOC content surface water.

The objective of this study was first to compare the performance of four strong anion exchange resins (AERs) (MIEX from Orica Pty Ltd, DOWEX-11 and DOWEX-MSA from DOW chemical and IRA-938 from Rohm and Haas) for their application in drinking water treatment (natural organic matter (NOM), mineral anions (nitrate, sulfate and bromide) and pesticide removal) using bench-scale experimental procedures on a high DOC content surface water. The efficiency of MIEX for NOM and mineral anions removal was furthermore evaluated using bench-scale dose-response experiments on raw, clarified and post-ozonated waters. NOM removal was assessed using the measurement of dissolved organic carbon (DOC), UV absorbance at 254 nm (UV254) and the use of high-performance size exclusion chromatography with UV (HPSEC/UV) and fluorescence detection (HPSEC/FLUO). The MIEX and IRA938 anionic resins exhibit a faster removal of NOM and mineral anions compared to the DOWEX11 and MSA AERs. All the resins were found to be very effective with similar performances after 30 to 45 min of contact time. As expected, only limited sorption of atrazine and isoproturon (C0=1 microg/L) occurred with MIEX, DOWEX11 and MSA AERs. MIEX resin proved to be very efficient in eliminating NOM of high-molecular weight but also a large part of the smallest UV absorbing organic compounds which were refractory to coagulation/flocculation treatment. Remaining DOC levels after 30 min of contact with MIEX were found similar in raw water, clarified water and even post-ozonated water implying no DOC benefit can be gained by employing conventional treatment prior to MIEX treatment. Removal of bromide (initial concentration 110 microg/L) was also observed and ranged from 30% to 65% for resin dose increasing from 2 to 8 mL/L. T

Monte Carlo Simulations for the Detection of Buried Objects Using Single Sided Backscattered Radiation.

BACKGROUND: Detection of buried improvised explosive devices (IEDs) is a delicate task, leading to a need to develop sensitive stand-off detection technology. The shape, composition and size of the IEDs can be expected to be revised over time in an effort to overcome increasingly sophisticated detection methods. As an example, for the most part, landmines are found through metal detection which has led to increasing use of non-ferrous materials such as wood or plastic containers for chemical based explosives being developed. METHODOLOGY: Monte Carlo simulations have been undertaken considering three different commercially available detector materials (hyperpure-Ge (HPGe), lanthanum(III) bromide (LaBr) and thallium activated sodium iodide (NaI(Tl)), applied at a stand-off distance of 50 cm from the surface and burial depths of 0, 5 and 10 cm, with sand as the obfuscating medium. Target materials representing medium density wood and mild steel have been considered. Each detector has been modelled as a 10 cm thick cylinder with a 20 cm diameter. PRINCIPAL FINDINGS: It appears that HPGe represents the most promising detector for this application. Although it was not the highest density material studied, its excellent energy resolving capability leads to the highest quality spectra from which detection decisions can be inferred. CONCLUSIONS: The simulation work undertaken here suggests that a vehicle-born threat detection system could be envisaged using a single betatron and a series of detectors operating in parallel observing the space directly in front of the vehicle path. Furthermore, results show that non-ferrous materials such as wood can be effectively discerned in such remote-operated detection system, with the potential to apply a signature analysis template matching technique for real-time analysis of such data.

An improved bromide assay for the estimation of extracellular water volume by capillary gas chromatography.

A sensitive bromide determination has been developed that consists of the following steps: isolation (purification) of bromide; oxidation of bromide to bromine with potassium permanganate and subsequent reaction with acetone, to give the volatile bromoacetone; quantification of bromoacetone by capillary gas chromatography. The method can also be used with small sample volumes appropriate for paediatric applications. Thermodynamic arguments are used to calculate the equilibria involved. The accuracy and reproducibility of the method have been determined. Finally, the bromide space of six volunteers was determined and the clearance of the bromide by the kidneys was investigated.

Electrochemical removal of bromide and reduction of THM formation potential in drinking water.

Trihalomethanes (THMs), a by-product of the chlorination of natural waters containing dissolved organic carbon and bromide, are the focus of considerable public health concern and regulation due to their potential as a carcinogen by ingestion. This paper presents a promising new water treatment process that lowers the concentration of bromide in drinking water and thus, lowers the THM formation potential. Bromide is oxidized by electrolysis to bromine and then the bromine apparently volatilized. The electrolyzed water, when chlorinated, produces measurably lower amounts of THMs and proportionately fewer brominated THMs, which are of greater public health concern than the chlorinated THMs. Removing bromide should also reduce the formation of other disinfection by-products such as bromate and haloacetic acids.

Enhanced coagulation using a magnetic ion exchange resin.

The objective of this investigation was to examine the effectiveness of a magnetic ion exchange resin (MIEX) to enhance the coagulation of disinfection by-product precursors in nine surface waters, each representing a different element of the USEPA's 3 x 3 enhanced coagulation matrix. The effect of MIEX-pretreatment on the requisite alum dose needed for subsequent coagulation of turbidity was also evaluated. Enhanced coagulation with MIEX was found to be very effective for removing trihalomethane (THM) and haloacetic acid (HAA) precursors from the nine waters examined. THM and HAA formation potential was reduced by more than 60% in all of the waters studied; reductions approaching 90% were seen in the waters with the highest specific ultraviolet absorbance values. The residual total organic carbon concentration, ultraviolet absorbance, and THM and HAA formation potential were all substantially lower as a result of MIEX and alum treatment compared to alum coagulation alone. MIEX pre-treatment also lowered the coagulant demand of each of the waters substantially.

Quantitative extraction of tubocurarine, gallamine, and decamethonium from biological materials.

A procedure is described for quantitative extraction of tubocurarine, gallamine, and decamethonium from blood, urine, and tissue. Ion pairs of the drugs are formed with picric acid and are extracted into a dichloromethane/1-pentanol solvent. Qualitative analysis of the extract is effected using thin-layer chromatography. Quantitative analysis is accomplished by elution of TLC areas containing the drug, formation of the ion pair with sodium 9,10-dimethoxyanthracene-2-sulfonate, and analysis of the ion pair by spectrophotofluorometry.

A review of the removal of anions and oxyanions of the halogen elements from aqueous solution by layered double hydroxides.

The application of layered double hydroxides (LDHs) and thermally activated LDHs for the removal of various fluorine (F(-),BF4(-)), chlorine (Cl(-),ClO4(-)), bromine (Br(-),BrO3(-)) and iodine (I(-),IO3(-)) species from aqueous solutions has been reviewed in this article. LDHs and thermally activated LDHs were able to significantly reduce the concentration of selected anions in laboratory scale experiments. The M(2+):M(3+) cation ratio of the LDH adsorbent was an important factor which influenced anion uptake. Though LDHs were able to remove some target anion species through anion exchange and surface adsorption thermal activation and reformation generally produced better results. The presence of competing anions including carbonate, phosphate and sulphate had a significant impact on uptake of the target anion as LDHs typically exhibit lower affinity towards monovalent anions compared to anions with multiple charges. The removal of fluoride and perchlorate from aqueous solution by a continuous flow system utilising fixed bed columns packed with LDH adsorbents has also been investigated. The adsorption capacity of the columns at breakpoint was heavily dependent on the flow rate and lower than result reported for the corresponding batch methods. There is still considerable scope for future research on numerous topics summarised in this article.

Physicochemical properties of silica gel coated with a thin layer of polyaniline (PANI) and its application in non-suppressed ion chromatography.

Physicochemical properties of a new sorbent and its potential application in non-suppressed ion chromatography (IC) have been investigated. The sorbent was obtained in a process of covering silica gel particles with a film of polyaniline (PANI). The properties of silica modified with polyaniline such as particle size, porosity, average quantity of polyaniline covering carrier and density of sorbent were determined. In our study the following methods were used: microscopic analysis, laser diffraction technique, combustion analysis, mercury porosimetry and helium pycnometry. Column with the newly obtained packing was used for the separation of inorganic anions. Optimized chromatographic system was successfully employed for analysis of iodide and bromide in selected pharmaceutical products (Bochnia salt and Iwonicz salt) applied in chronic respiratory disease. Analysis was carried out using 0.1M solution of HCl in mixture of methanol/water (50:50v/v) as a mobile phase; the flow rate was 0.3 mL min(-1), temperature was 24°C and λ=210 nm. Validation parameters such as correlation coefficient, RSD values, recovery, detection and quantification limits were found to be satisfactory.

Surge block method for controlling well clogging and sampling sediment during bioremediation.

A surge block treatment method (i.e. inserting a solid rod plunger with a flat seal that closely fits the casing interior into a well and stocking it up and down) was performed for the rehabilitation of wells clogged with biomass and for the collection of time series sediment samples during in situ bioremediation tests for U(VI) immobilization at a the U.S. Department of Energy site in Oak Ridge, TN. The clogging caused by biomass growth had been controlled by using routine surge block treatment for 18 times over a nearly four year test period. The treatment frequency was dependent of the dosage of electron donor injection and microbial community developed in the subsurface. Hydraulic tests showed that the apparent aquifer transmissivity at a clogged well with an inner diameter (ID) of 10.16 cm was increased by 8-13 times after the rehabilitation, indicating the effectiveness of the rehabilitation. Simultaneously with the rehabilitation, the surge block method was successfully used for collecting time series sediment samples composed of fine particles (clay and silt) from wells with ID 1.9-10.16 cm for the analysis of mineralogical and geochemical composition and microbial community during the same period. Our results demonstrated that the surge block method provided a cost-effective approach for both well rehabilitation and frequent solid sampling at the same location.