Capturing carbon dioxide from air with charged-sorbents.

Emissions reduction and greenhouse gas removal from the atmosphere are both necessary to achieve net-zero emissions and limit climate change1. There is thus a need for improved sorbents for the capture of carbon dioxide from the atmosphere, a process known as direct air capture. In particular, low-cost materials that can be regenerated at low temperatures would overcome the limitations of current technologies. In this work, we introduce a new class of designer sorbent materials known as 'charged-sorbents'. These materials are prepared through a battery-like charging process that accumulates ions in the pores of low-cost activated carbons, with the inserted ions then serving as sites for carbon dioxide adsorption. We use our charging process to accumulate reactive hydroxide ions in the pores of a carbon electrode, and find that the resulting sorbent material can rapidly capture carbon dioxide from ambient air by means of (bi)carbonate formation. Unlike traditional bulk carbonates, charged-sorbent regeneration can be achieved at low temperatures (90-100 °C) and the sorbent's conductive nature permits direct Joule heating regeneration2,3 using renewable electricity. Given their highly tailorable pore environments and low cost, we anticipate that charged-sorbents will find numerous potential applications in chemical separations, catalysis and beyond.

Effects of phosphorus-solubilizing bacteria and biochar application on phosphorus availability and tomato growth under phosphorus stress.

BACKGROUND: Phosphorus-solubilizing bacteria (PSB) are vital in converting insoluble phosphorus into a soluble form that plants can readily absorb and utilize in soil. While previous studies have mainly focused on the extracellular secretion of microorganisms, few have explored the intricate intracellular metabolic processes involved in PSB-mediated phosphorus solubilization. RESULTS: Here, we uncovered that Ca3(PO4)2 could serve as a source of insoluble phosphorus for the PSB, Pseudomonas sp. NK2. High-performance liquid chromatography (HPLC) results indicated higher levels of organic acids released from insoluble phosphorus compared to a soluble phosphorus source (KH2PO4), with acetic acid released exclusively under insoluble phosphorus condition. Moreover, non-target metabolomics was employed to delve into the intracellular metabolic profile. It unveiled that insoluble phosphorus significantly enhanced the tricarboxylic acid cycle, glycolysis, glyoxylic acid metabolism, and other pathways, leading to the production of acetic acid, gluconic acid, oxalic acid, and citric acid for insoluble phosphorus solubilization. In our quest to identify suitable biochar carriers, we assessed seven types of biochar through the conjoint analysis of NBRIP medium culture and application to soil for 30 days, with cotton straw-immobilized NK2 emerging as the most potent phosphorus content provider. Lastly, NK2 after cotton straw immobilization demonstrated the ability to enhance biomass, plant height, and root development of Solanum lycopersicum L. cv. Micro Tom. CONCLUSIONS: Pseudomonas sp. NK2 with cotton straw biochar could enhance phosphorus availability and tomato growth. These findings bear significant implications for the practical application of phosphorus-solubilizing bacteria in agricultural production and the promotion of environmentally sustainable farming practices.

Assessing biochar, clinoptilolite zeolite and zeo-char loaded nano-nitrogen for boosting growth performance and biochemical ingredients of peace lily (Spathiphyllum Wallisii) plant under water shortage.

BACKGROUND: Peace lily (Spathiphyllum wallisii Regel) is an ornamental indoor plant with promising cut flower market, as well as antiviral, pharmacological and ecological potentials. Water deficiency can have sound effects on the growth performance and aesthetic quality of such plant. The aim of this study was to investigate the consequences of zeolite, biochar, and zeo-char loaded nano-nitrogen application on the growth performance and biochemical components of peace lily under water shortage conditions. An experiment was conducted over two consecutive seasons (2021-2022) at the experimental nursery of Ornamental Horticulture Department, Faculty of Agriculture, Cairo University, Giza, Egypt. Soil amendments; zeolite, biochar, and zeo-char loaded nano-nitrogen were prepared and applied to soil before cultivation. RESULTS: Our results revealed that the new combination treatment (zeo-char loaded nano-N) had an exceeding significant effect on most of the studied parameters. Vegetative traits such as plant height (35.7 and 35.9%), leaf number per plant (73.3 and 52.6%), leaf area (40.2 and 36.4%), stem diameter (28.7 and 27.1%), root number (100 and 43.5%) and length (105.7 and 101.9%) per plant, and fresh weight of leaves (23.2 and 21.6%) were significantly higher than control (commercially recommended dose of NPK) with the application of zeo-char loaded nano-N during the two growing seasons, respectively. Similar significant increments were obtained for some macro- (N, P, K, Mg, Ca) and micro- (Fe, Zn, Mn) elements with the same treatment relative to control. Chlorophyll (18.4%) and total carotenoids (82.9 and 32.6%), total carbohydrates (53.3 and 37.4%), phenolics (54.4 and 86.9%), flavonoids (31.7% and 41.8%) and tannins (69.2 and 50%), in addition to the phytohormone gibberellic acid (GA3) followed the same trend with the application of zeo-char loaded nano-N, increasing significantly over control. Leaf histological parameters and anatomical structure were enhanced with the new combination treatment in comparison with control. Antioxidant enzymes (catalase and peroxidase), proline and abscisic acid (ABA) exhibited significant declines with zeo-char loaded nano-N treatment relative to control. CONCLUSION: These findings suggest that incorporating soil amendments with nano- nutrients could provide a promising approach towards improving growth performance and quality of ornamental, medicinal and aromatic species under water deficiency conditions.

Growth regulation in bread wheat via novel bioinoculant formulation.

Wheat (Triticum aestivum L.) is one of the most significant crops and the backbone of food security worldwide. However, low wheat production remains a substantial concern in global agricultural systems. It can be attributed to several factors, including adverse climatic conditions, plant disease and poor soil quality. Recent efforts have explored bioinoculant applications as a promising approach to enhance wheat yield, trying to mitigate constraints essential for future wheat production and global food security. This study tested talc powder, wheat biochar, sugarcane bagasse biochar, and farmyard manure as carriers with two endophytic bacterial strains, Burkholderia phytofirmans PsJN and Bacillus spp. MN54 was applied to three wheat varieties (Ujala-16, Zincol-16, and Fathejang-16). The data was recorded at the seedling and maturity growth stages of plants. A pot experiment revealed significant improvements in plant growth following bioinoculant application compared to controls. Notably, the combination of sugarcane bagasse biochar with Bacillus sp. MN54 exhibited the most pronounced effects, promoting internodal length, spike length, tiller number per plant, grain yield per plant, and spikelets per spike. Additionally, talc powder with Bacillus sp. MN54 increased peduncle length, tiller number per plant, and spike length in Fathejang-16. These findings offer valuable insights into optimizing bioinoculant formulations for improved agricultural practices, adapting to climate change, and contributing to ensuring global food security.

Agricultural waste-based modified biochars differentially affected the soil properties, growth, and nutrient accumulation by maize (Zea mays L.) plants.

Biochar (BC) is an organic compound formed by the pyrolysis of organic wastes. Application of BCs as soil amendments has many benefits including carbon sequestration, enhanced soil fertility and sustainable agriculture production. In the present study, we acidified the different BCs prepared from rice straw, rice husk, wheat straw, cotton stalk, poultry manure, sugarcane press mud and vegetable waste; following which, we applied them in a series of pot experiments. Comparisons were made between acidified and non- acidified BCs for their effects on seed germination, soil properties (EC, pH) nutrient contents (P, K, Na) and organic matter. The treatments comprised of a control, and all above-described BCs (acidified as well as non-acidified) applied to soil at the rate of 1% (w/w). The maize crop was selected as a test crop. The results showed that acidified poultry manure BC significantly improved germination percentage, shoot length, and biomass of maize seedlings as compared to other BCs and their respective control plants. However, acidified BCs caused a significant decrease in nutrient contents (P, K, Na) of soil,maize seedlings, and the soil organic matter contents as compared to non- acidified BCs. But when compared with control treatments, all BCs treatments (acidified and non-acidified) delivered higher levels of nutrients and organic matter contents. It was concluded that none of the BCs (acidified and non-acidified) had caused negative effect on soil conditions and growth of maize. In addition, the acidification of BC prior to its application to alkaline soils might had altered soil chemistry and delivered better maize growth. Moving forward, more research is needed to understand the long-term effects of modified BCs on nutrient dynamics in different soils. In addition, the possible effects of BC application timings, application rates, particle size, and crop species have to be evaluated systemtically.

Biochar Meets Single-Atom: A Catalyst for Efficient Utilization in Environmental Protection Applications and Energy Conversion.

Single-atom catalysts (SACs), combining the advantages of multiphase and homogeneous catalysis, have been increasingly investigated in various catalytic applications. Carbon-based SACs have attracted much attention due to their large specific surface area, high porosity, particular electronic structure, and excellent stability. As a cheap and readily available carbon material, biochar has begun to be used as an alternative to carbon nanotubes, graphene, and other such expensive carbon matrices to prepare SACs. However, a review of biochar-based SACs for environmental pollutant removal and energy conversion and storage is lacking. This review focuses on strategies for synthesizing biochar-based SACs, such as pre-treatment of organisms with metal salts, insertion of metal elements into biochar, or pyrolysis of metal-rich biomass, which are more simplistic ways of synthesizing SACs. Meanwhile, this paper attempts to 1) demonstrate their applications in environmental remediation based on advanced oxidation technology and energy conversion and storage based on electrocatalysis; 2) reveal the catalytic oxidation mechanism in different catalytic systems; 3) discuss the stability of biochar-based SACs; and 4) present the future developments and challenges regarding biochar-based SACs.

Preparation of biochars by conventional pyrolysis of herbal waste and their potential application for adsorption and energy purposes.

The nettle, sage, mint and lemon balm herbs were used for biochars preparation. The physicochemical parameters of obtained materials were related to the lignocellulose composition of the precursors. It has been proved that the content of mineral substance has a significant influence on development of surface area, whereas the amount of hemicellulose affects the content of surface functional groups. It has been also shown that the obtained biochars are characterized by great energy parameters. The higher heating values (HHV) of the carbonaceous materials are comparable to the typical energy sources. The greatest HHV value (20.36 MJ/kg) was characteristic for the biochar obtained by pyrolysis of the lemon balm. In addition, the biochars were used for ionic polymers adsorption from one- and two-components solutions. Despite the adsorbed amounts of macromolecules are not great is has been proved that polyethylenimine and polyacrylic acid have positive influence on their mutual adsorption.

Preparation of Activated Biocarbons from Cones and their Potential Application for Adsorption of Antibiotics (Tetracycline).

The pine cones (PC), spruce cones (SC) and fir cones (FC) were used for biocarbons preparation. Chemical activation with sodium hydroxide was applied to prepare activated biocarbons. All the materials under investigation were characterized by the N2 adsorption, scanning electron microscopy (SEM), elemental analysis (CHNS), infrared spectroscopy (ATR FT-IR), and the Boehm's titration method. Moreover, pHpzc (the point of zero charge) was determined. It was shown that cones are a good, cheap precursor from which biocarbons with a developed porous structure, characterized by good adsorption properties, can be obtained. All the obtained adsorbents are characterized mainly by a microporous structure. Moreover, they contain both acidic and basic surface functional groups (acidic ones prevail over basic ones). The tested activated biocarbons have large specific surface area values ranging from 578 to 1182 m2 g-1. The efficacy of selected materials in the adsorption of an essential contaminant of increasing concern, tetracycline (TC), was investigated. The experimental data were described using the Langmuir and Freundlich adsorption isotherm models. The maximum adsorption capacity of the tested biocarbons ranges from 200 to 392 mg g-1. Thermodynamic studies proved that adsorption is a spontaneous and endothermic process. In summary, economical and environmentally friendly adsorbents were obtained.

Inhibition of hyphal formation together with biochar addition promotes erythritol production by Yarrowia lipolytica.

This study aimed to investigate the effect of hyphal formation in Yarrowia lipolytica and biochar addition on erythritol production by submerged fermentation. Hyphal formation significantly inhibited erythritol production by Y. lipolytica. Transcriptome analysis suggested that the impaired erythritol synthesis of hyphal cells was associated with the differential expression of genes involved in amino acid metabolism, lipid metabolism, and cell wall stability. Deletion of RAS2 responsible for yeast-to-hypha transition and EYD1 included in erythritol degradation blocked hyphal formation and improved erythritol production. Biochar prepared from corncob, sugarcane bagasse (SB), corn straw, peanut shell, coconut shell, and walnut shell (WS) had a positive effect on erythritol production, of which WS pyrolyzed at 500°C (WSc) performed the best in flask fermentation. In a 3.7 L bioreactor, 220.20 ± 10 g/L erythritol with a productivity of 2.30 ± 0.10 g/L/h was obtained in the presence of 1.4% (w/v) WSc and 0.7% SBc (SB pyrolyzed at 500°C) within 96 h. These results suggest that inhibition of hyphal formation together with biochar addition is an efficient way to promote erythritol production.

Acceleration of Fenton-like Reaction by Bimetal-Mediated Sludge Biochar for Tetracycline Removal.

The production of sludge biochar (SBC) from residual sludge offers a solution to the challenges associated with sludge disposal and facilitates the reutilization of resources. In the present research, a bimetallic-modified sludge biochar, designated as FeCu-SBC, was synthesized by varying the doping ratios of FeSO4 and CuSO4. This material was intended for the effective degradation of tetracycline (TC) in aqueous environments via the activation of peroxydisulfate. The FeCu2-SBC (90% degradation rate) composite, synthesized through the incorporation of Fe and Cu in a 1:2 ratio with SBC, exhibited a degradation rate of TC, which was 2.7 times higher than that of SBC (32.85% degradation rate) and 1.8 times higher than that of FeCu (50% degradation rate). Research examining the mechanisms involved revealed that FeCu underwent degradation solely through the radical (•OH) pathway, whereas FeCu2-SBC was subject to degradation through both radical (SO4•-) and nonradical (1O2) pathways. This phenomenon was attributed to the distinct π-π, C═O, and defect structures in FeCu2-SBC compared to FeCu, which facilitated the activation process leading to the production of reactive species. This investigation presented a cost-effective approach for producing bimetallic-modified sludge biochar, offering perspectives on determining the crucial elements influencing the streamlined TC degradation pathway.

Valorization of Agriculture Residues into Value-Added Products: A Comprehensive Review of Recent Studies.

Global agricultural by-products usually go to waste, especially in developing countries where agricultural products are usually exported as raw products. Such waste streams, once converted to "value-added" products could be an additional source of revenue while simultaneously having positive impacts on the socio-economic well-being of local people. We highlight the utilization of thermochemical techniques to activate and convert agricultural waste streams such as rice and straw husk, coconut fiber, coffee wastes, and okara power wastes commonly found in the world into porous activated carbons and biofuels. Such activated carbons are suitable for various applications in environmental remediation, climate mitigation, energy storage, and conversions such as batteries and supercapacitors, in improving crop productivity and producing useful biofuels.

The potential for synthesized invasive plant biochar with hydroxyapatite to mitigate allelopathy of Solidago canadensis.

Few studies tried to explore the mitigation effect and underlying mechanisms of biochar and their complex for negative allelopathy from invasive plants, which may provide a new way in the invasive plant management. Herein, an invasive plant (Solidago canadensis)-derived biochar (IBC) and its composite with hydroxyapatite (HAP/IBC) were synthesized by high temperature pyrolysis, and characterized by scanning electron microscopy, energy dispersion spectrometer, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Then, both the batch adsorption and pot experiments were conducted to compare the removal effects of kaempferol-3-O-ß-D-glucoside (C21 H20 O11 , kaempf), an allelochemical from S. canadensis, on IBC and HAP/IBC, respectively. HAP/IBC showed a stronger affinity for kaempf than IBC due to its higher specific surface area, more functional groups (P-O, P-O-P, PO4 3- ), stronger crystallization [Ca3 (PO4 )2 ]. The maximum kaempf adsorption capacity on HAP/IBC was six times higher than on IBC (10.482 mg/g > 1.709 mg/g) via π-π interactions, functional groups, and metal complexation. The kaempf adsorption process could be fitted best by both pseudo-second-order kinetic and Langmuir isotherm models. Furthermore, HAP/IBC addition into soils could enhance and even recover the germination rate and/or seedling growth of tomato inhibited by negative allelopathy from the invasive S. canadensis. These results indicate that the composite of HAP/IBC could more effectively mitigate the allelopathy from S. canadensis than IBC, which may be a potential efficient approach to control the invasive plant and improve invaded soils.

New Insights into Aggregation Behaviors of the UV-Irradiated Dissolved Biochars (DBioCs) in Aqueous Environments: Effects of Water Chemistries and Variation in the Hamaker Constant.

The aggregation behavior of ubiquitous dissolved black carbon (DBC) largely affects the fate and transport of its own contaminants and the attached contaminants. However, the photoaging processes and resulting effects on its colloidal stability remain yet unknown. Herein, dissolved biochars (DBioCs) were extracted from common wheat straw biochar as a proxy for an anthropogenic DBC. The influences of UV radiation on their aggregation kinetics were systematically investigated under various water chemistries (pH, electrolytes, and protein). The environmental stability of the DBioCs before and after radiation was further verified in two natural water samples. Hamaker constants of pristine and photoaged DBioCs were derived according to Derjaguin-Landau-Verwey-Overbeek (DLVO) prediction, and its attenuation (3.19 ± 0.15 × 10-21 J to 1.55 ± 0.07 × 10-21 J after 7 days of radiation) was described with decay kinetic models. Pearson correlation analysis revealed that the surface properties and aggregation behaviors of DBioCs were significantly correlated with radiation time (p < 0.05), indicating its profound effects. Based on characterization and experimental results, we proposed a three-stage mechanism (contended by photodecarboxylation, photo-oxidation, and mineral exposure) that DBioCs might experience under UV radiation. These findings would provide an important reference for potential phototransformation processes and relevant behavioral changes that DBC may encounter.

Activated Carbon Application Simultaneously Alleviates Paddy Soil Arsenic Mobilization and Carbon Emission by Decreasing Porewater Dissolved Organic Matter.

Flooding of paddy fields during the rice growing season enhances arsenic (As) mobilization and greenhouse gas (e.g., methane) emissions. In this study, an adsorbent for dissolved organic matter (DOM), namely, activated carbon (AC), was applied to an arsenic-contaminated paddy soil. The capacity for simultaneously alleviating soil carbon emissions and As accumulation in rice grains was explored. Soil microcosm incubations and 2-year pot experimental results indicated that AC amendment significantly decreased porewater DOM, Fe(III) reduction/Fe2+ release, and As release. More importantly, soil carbon dioxide and methane emissions were mitigated in anoxic microcosm incubations. Porewater DOM of pot experiments mainly consisted of humic-like fluorophores with a molecular structure of lignins and tannins, which could mediate microbial reduction of Fe(III) (oxyhydr)oxides. Soil microcosm incubation experiments cospiking with a carbon source and AC further consolidated that DOM electron shuttling and microbial carbon source functions were crucial for soil Fe(III) reduction, thus driving paddy soil As release and carbon emission. Additionally, the application of AC alleviated rice grain dimethylarsenate accumulation over 2 years. Our results highlight the importance of microbial extracellular electron transfer in driving paddy soil anaerobic respiration and decreasing porewater DOM in simultaneously remediating As contamination and mitigating methane emission in paddy fields.

Identifying Quinones in Complex Aqueous Environmental Media (Biochar Extracts) through Tagging with Cysteine and Cysteine-Contained Peptides and High Resolution Mass Spectrometry Analysis.

Quinones are among the most important components in natural organic matter (NOM) for redox reactions; however, no quinones in complex environmental media have been identified. To aid the identification of quinone-containing molecules in ultracomplex environmental samples, we developed a chemical tagging method that makes use of a Michael addition reaction between quinones and thiols (-SH) in cysteine (Cys) and cysteine-contained peptides (CCP). After the tagging, candidates of quinones in representative aqueous environmental samples (water extractions of biochar) were identified through high-resolution mass spectrometry (HRMS) analysis. The MS and UV spectra analysis showed rapid reactions between Cys/CCP and model quinones with ß-carbon from the same benzene ring available for Michael addition. The tagging efficiency was not influenced by other co-occurring nonquinone representative compounds, including caffeic acid, cinnamic acid, and coumaric acid. Cys and CCP were used to tag quinones in water extractions of biochars, and possible candidates of quinones (20 and 53 based on tagging with Cys and CCP, respectively) were identified based on the HRMS features for products of reactions with Cys/CCP. This study has successfully demonstrated that such a Michael addition reaction can be used to tag quinones in complex environmental media and potentially determine their identities. The method will enable an in-depth understanding of the redox chemistry of NOM and its critical chemical compositions and structures.

Efficient Catalytic Elimination of Toxic Volatile Organic Compounds via Advanced Oxidation Process Wet Scrubbing with Bifunctional Cobalt Sulfide/Activated Carbon Catalysts.

Advanced oxidation process (AOP) wet scrubber is a powerful and clean technology for organic pollutant treatment but still presents great challenges in removing the highly toxic and hydrophobic volatile organic compounds (VOCs). Herein, we elaborately designed a bifunctional cobalt sulfide (CoS2)/activated carbon (AC) catalyst to activate peroxymonosulfate (PMS) for efficient toxic VOC removal in an AOP wet scrubber. By combining the excellent VOC adsorption capacity of AC with the highly efficient PMS activation activity of CoS2, CoS2/AC can rapidly capture VOCs from the gas phase to proceed with the SO4•- and HO• radical-induced oxidation reaction. More than 90% of aromatic VOCs were removed over a wide pH range (3-11) with low Co ion leaching (0.19 mg/L). The electron-rich sulfur vacancies and low-valence Co species were the main active sites for PMS activation. SO4•- was mainly responsible for the initial oxidation of VOCs, while HO• and O2 acted in the subsequent ring-opening and mineralization processes of intermediates. No gaseous intermediates from VOC oxidation were detected, and the highly toxic liquid intermediates like benzene were also greatly decreased, thus effectively reducing the health toxicity associated with byproduct emissions. This work provided a comprehensive understanding of the deep oxidation of VOCs via AOP wet scrubber, significantly accelerating its application in environmental remediation.

Interaction Effects between the Main Components of Protein-Rich Biomass during Microwave-Assisted Pyrolysis.

The interaction effects between the main components (proteins (P), carbohydrates (C), and lipids (L)) of protein-rich biomass during microwave-assisted pyrolysis were investigated in depth with an exploration of individual pyrolysis and copyrolysis (PC, PL, and CL) of model compounds. The average heating rate of P was higher than those of C and L, and the interactions in all copyrolysis groups reduced the max instant heating rate. The synergistic extent (S) of PC and PL for bio-oil yield was 16.78 and 18.24%, respectively, indicating that the interactions promoted the production of bio-oil. Besides, all of the copyrolysis groups exhibited a synergistic effect on biochar production (S = 19.43-28.24%), while inhibiting the gas generation, with S ranging from -20.17 to -6.09%. Regarding the gaseous products, apart from H2, P, C, and L primarily generated CO2, CO, and CH4, respectively. Regarding bio-oil composition, the interactions occurring within PC, PL, and CL exhibited a significantly synergistic effect (S = 47.81-412.96%) on the formation of N-heterocyclics/amides, amides/nitriles, and acids/esters, respectively. Finally, the favorable applicability of the proposed interaction effects was verified with microalgae. This study offers valuable insights for understanding the microwave-assisted pyrolysis of protein-rich biomass, laying the groundwork for further research and process optimization.

From Bulk to Nano: Formation, Features, and Functions of Nano-Black Carbon in Biogeochemical Processes.

Globally increasing wildfires and widespread applications of biochar have led to a growing amount of black carbon (BC) entering terrestrial ecosystems. The significance of BC in carbon sequestration, environmental remediation, and the agricultural industry has long been recognized. However, the formation, features, and environmental functions of nanosized BC, which is one of the most active fractions in the BC continuum during global climate change, are poorly understood. This review highlights the formation, surface reactivity (sorption, redox, and heteroaggregation), biotic, and abiotic transformations of nano-BC, and its major differences compared to other fractions of BC and engineered carbon nanomaterials. Potential applications of nano-BC including suspending agent, soil amendment, and nanofertilizer are elucidated based on its unique properties and functions. Future studies are suggested to develop more reliable detection techniques to provide multidimensional information on nano-BC in environmental samples, explore the critical role of nano-BC in promoting soil and planetary health from a one health perspective, and extend the multifield applications of nano-BC with a lower environmental footprint but higher efficiency.

Is Pyrolysis Treatment a Viable Solution to Detoxify Metal(loid)s in Sewage Sludge toward Land Application? Case Studies of Chromium and Zinc.

Metal(loid)s in sewage sludge (SS) are effectively immobilized after pyrolysis. However, the bioavailability and fate of the immobilized metal(loid)s in SS-derived biochar (SSB) following land application remain largely unknown. Here, the speciation and bioavailability evolution of SSB-borne Cr and Zn in soil were systematically investigated by combining pot and field trials and X-ray absorption spectroscopy. Results showed that approximately 58% of Cr existing as Cr(III)-humic complex in SS were transformed into Fe (hydr)oxide-bound Cr(III), while nano-ZnS in SS was transformed into stable ZnS and ferrihydrite-bound species (accounting for over 90% of Zn in SSB) during pyrolysis. All immobilized metal(loid)s, including Cr and Zn, in SSB tended to be slowly remobilized during aging in soil. This study highlighted that SSB acted as a dual role of source and sink of metal(loid)s in soil and posed potential risks by serving a greater role of a metal(loid) source than a sink when applied to uncontaminated soils. Nevertheless, SSB could impede the translocation of metal(loid)s from soil to crop compared to SS, where coexisting elements, including Fe, P, and Zn, played critical roles. These findings provide new insights for understanding the fate of SSB-borne metal(loid)s in soil and assessing the viability of pyrolyzing SS for land application.

Sorption of Soil Carbon Dioxide by Biochar and Engineered Porous Carbons.

CO2 is 45 to 50 times more concentrated in soil than in air, resulting in global diffusive fluxes that outpace fossil fuel combustion by an order of magnitude. Despite the scale of soil CO2 emissions, soil-based climate change mitigation strategies are underdeveloped. Existing approaches, such as enhanced weathering and sustainable land management, show promise but continue to face deployment barriers. We introduce an alternative approach: the use of solid adsorbents to directly capture CO2 in soils. Biomass-derived adsorbents could exploit favorable soil CO2 adsorption thermodynamics while also sequestering solid carbon. Despite this potential, previous study of porous carbon CO2 adsorption is mostly limited to single-component measurements and conditions irrelevant to soil. Here, we probe sorption under simplified soil conditions (0.2 to 3% CO2 in balance air at ambient temperature and pressure) and provide physical and chemical characterization data to correlate material properties to sorption performance. We show that minimally engineered pyrogenic carbons exhibit CO2 sorption capacities comparable to or greater than those of advanced sorbent materials. Compared to textural features, sorbent carbon bond morphology substantially influences low-pressure CO2 adsorption. Our findings enhance understanding of gas adsorption on porous carbons and inform the development of effective soil-based climate change mitigation approaches.