Measurement of Incisor Overjet and Physiological Diastemata Parameters in Quarter Horse Foals.

Cephalometric studies are important to quantify abnormalities of jaw length and positioning. In this study, 4 to 7-month-old Quarter horse foals (n = 51) were examined to determine overjet (horizontal overlap) prevalence and measure the size of the physiological diastemata. Results were analyzed in relation to age, sex, and lineage. Another aim of this study was to develop a simple field technique for measuring incisor malocclusion and physiological diastemata dimensions that could be used to monitor the growth of the rostral components of maxilla, incisive bone, and mandible. The overall prevalence of overjet lesions in these foals was 51%. Females were overrepresented (61.5%). Overjet occurred more commonly in show foals (50% prevalence) than other working (7.7%) and race (42.3%) lineage foals. Significant differences were found between maxillary and mandibular physiological diastemata lengths in foals of all ages and, as expected, there was a positive statistical correlation between age and maxillary and mandibular physiological diastemata measurements. Incisor overjet was present in 44.4% of 4-month-old foals, 45.5% of 5-month-old foals, 58.3% of 6-month-old foals, and 60% of 7-month-old foals. There was a weak positive correlation between age and the presence of incisor overjet. It was concluded that incisor overiet was common among Quarter horse foals, especially those from show and race lineages. The field technique for physiological diastema measurements was considered effective.

Preliminary study on cranial measurements and sexual dimorphism in skull bones of gaur (Bos gaurus gaurus, Smith 1827).

Cranial measurements have been widely used in various studies in wildlife sciences, ranging from understanding predator ecology to wildlife forensics. However, detailed description of morphometry and sexual dimorphism of the skull of gaur Bos gaurus gaurus is lacking. The present study was undertaken to determine the sexual dimorphism based on the cranial measurements of gaur. A total of 12 individual gaur skulls of male (n = 6) and female (n = 6) were studied in the field from the naturally deceased animals between January 2018 and December 2021 in different ranges of Bandhavgarh tiger reserve (BTR), Madhya Pradesh, India. The skull measurements were analysed using univariate and multivariate statistics to determine whether cranial dimensions could be used to differentiate male and female skulls reliably. A total of 43 morphometrical parameters grouped into nine indices were calculated. Select morphometrical parameters viz PL, GFL, AKI, LBB, LFB, GBEE, GBAN, BPOP and GTCH were significantly different (p < 0.05) between sexes, whereas GBAN were significantly higher in female skulls. The measurements demonstrated that the skull of the gaur was dolichocephalic as the profile length and the otion to otion breath in both male and female were <75% of the length. Overall, 28 linear measurements of both the sexes were statistically significant (p < 0.05; <0.01). The calculated indices revealed that the foramen magnum index in the female gaur were significantly higher. In calculated cranial indices the facial index (a) was higher in female and facial index (b) were higher in males. The two important parameters, facial breadth in facial index (a) and the greatest breadth in facial index (b) were positively correlated, though facial index (a) was statistically not significant between the sexes. The greater inner length of the foramen magnum in female skull resulted in foramen being oval whereas it was circular in males. These parameters were decisive for sexual dimorphism, skull comparison and craniological studies. This study ascertained that the frontal index and skull index had no significant influence and were not good indices for discriminating skulls between male and female. Based on the Principal Component Analysis, it was found that skull of male and female gaurs exhibits differences in cranial morphology viz. cranial profile length or total length (PL) and the least inner height of the temporal groove (LIHT). The findings of the present study provide baseline information on various craniometrical measurements of skull of gaur, indices and parameters for sex identification that can be effectively used in understanding sex biased predation ecology, provide base line information to describe variation across its geographic range, and in identifying skulls recovered in wildlife offence cases.

Comparison of craniometric measurements of New Zealand rabbit (Oryctolagus cuniculus L.) using three-dimensional scanner with digital calliper measurements: A methodological study.

As technology has developed in recent years, the use of three-dimensional (3D) scanners and printers has become widespread in the medical field. However, since this field is new, all kinds of methodological and experimental related studies gain importance. This study aimed to identify the differences between the calliper measurements by determining the craniometric data on the models constructed by scanning the crania of New Zealand Rabbits (Oryctolagus cuniculus L.), preferred as experimental animals, with a three-dimensional scanner. Therefore, a total of 12 New Zealand rabbits including 6 females and 6 males were used. After the crania that comprised the study material were macerated, they were subjected to 3D scanning. After the scanning process was completed, they were craniometrically measured both on the scanned models and by using a digital calliper. Analysis of the craniometric data of the 3D scanner showed that there was a difference between sexes at the level of p < 0.05 in widest length between the external acoustic meatus (WLBEAM), skull width and Foramen magnum height (FMH) parameters and cranial index data, and at the level of p < 0.001 in the largest nasal width (LNW) parameter. A statistical difference was found between sexes in frontal length, WLBEAM, LNW and FMH parameters and cranial index values in craniometric data collected with the digital calliper (p < 0.05). Consequently, the data collected in this study were found to be close to each other in both methods, suggesting that the 3D scanner may be used in morphometric studies.

Three-dimensional modelling and morphometric analysis of skull of badger (Meles meles) with computed tomography images.

BACKGROUND: Morphometric measurements help to understand the skull morphology in different animal species, detect skull deformations and figure out their causes. OBJECTIVES: The aim of this study is to make a three-dimensional (3D) modelling of the badger skull using computed tomography, to show its anatomical structures and to reveal the morphometric measurement values. METHODS: Skull measurements were carried out using a digital calliper at 27 measurement points based on metric measurement points. After the scanned images were stored in Digital Imaging and Communications in Medicine format, they were transferred to MIMICS 20.1 (The Materialize Group) programme and 3D models the skulls were created. The surface area and volume values of the skulls were calculated on these models. RESULTS: The volume and surface area parameters were expressed as mean ± SE. Four different indices were calculated using osteometric measurements. Statistical analyses were made by determining the mean value and standard deviation of the examined properties and the correlation coefficients among these properties. In the metric measurement points taken as a basis, the longest measurement in the skulls was the total length and its mean value was 124.60 ± 0.64 mm. The shortest measurement was the breadth dorsal to the external auditory meatus, and its mean value was 6.75 ± 0.24 mm. CONCLUSIONS: Consequently, statistical differences in the craniometric values of badgers' skulls were determined by using CT and 3D modelling software. In addition, it was concluded that the badger skull can be easily distinguished from other carnivore species by carrying out morphometric measurements.

Radiological examination of the skull of Siirt-coloured mohair goat, Romanov and Hamdani sheep.

The skull is a vitally important complex structure formed by the combination of many bones. Craniometric studies are performed with various imaging methods to determine morphometric characteristics in animals. One of these methods is radiography. In our study, skulls of 14 Hamdani sheep, 20 Siirt-coloured mohair goats and 20 Romanov sheep breeds were used. Skull sections were taken with a computed tomography device and saved in DICOM format. Nine separate measurements and six index calculations were made from the images. In the study, firstly, the gender difference was ignored and the similarities and differences between the species were recorded. In addition, gender differences were determined statistically, without making any distinction between species. Correlation analysis was performed to compare measurement parameters between animal species. As a result of the study, the highest skull length (SL) and cranial length (CL) values were determined in the Siirt-coloured mohair goat. It was determined that the difference between Romanov sheep and Siirt-coloured mohair goat in CL parameter was not statistically significant (p > 0.05). In addition, a statistically significant difference was observed between the Romanov sheep breed and the Hamdani sheep breed (p < 0.01). The external length of the cranium (ELC) measurement parameter was found to have a statistically significant difference in three animals (p < 0.01). According to the results of the correlation analysis, the highest correlation value was determined between cranial width (CW) and CL parameters (r = 0.920). When the species difference was ignored, and the statistical difference of the internal height of the cranium (IHC) parameter was found to be significant between female and male animals (p < 0.05). In addition, it was determined that SL, CW and internal cranium index (ICI) parameters had a significant difference depending on sex (p < 0.01). It is foreseen that the obtained data can be used in sciences such as zoo archaeology, anatomy, surgery and forensic medicine.

Morphometric analysis of the skull of Hamdani sheep via Three-Dimensional modelling.

The aim of the present study was to determine the craniometric characteristics of the crania of Hamdani sheep, one of local breeds of Turkey, by using computed tomography (CT). In the study, 13 (six female and seven male) skulls were used. After CT images of the skulls were taken, their three-dimensional models were created by MIMICS 20.1 (The Materialise Group, Leuven, Belgium) program. Thirty-eight craniometric measurements were taken over the models created and nine indices were calculated by using these measurements. All the characteristics examined were expressed as mean ± SE. In the study, statistically significant differences were found between females and males in terms of greatest neurocranium breadth, facial breadth, greatest palatal breadth (p < 0.05) and height of the foramen magnum (p < 0.01) parameters. No statistically significant difference was observed between the sexes in the calculated index values (p > 0.05). In conclusion, it is thought that the findings obtained from the study will contribute to the zooarchaeology and sheep taxonomy of Mesopotamian region.

Examination of the depth of the equine hard palate.

Equine behavioral problems and loss of optimum performance have been associated with musculoskeletal injury and, more recently, dental disease. Injuries to a horse's tongue and bars of the mandible due to bitting have been documented. However, another point of contact of the bit, the hard palate, has thus far been virtually ignored. The objective of the study was to determine if there was a significant range associated with the depth of the equine hard palate and if this range was associated with a certain breed, age, or sex of the horse. Oral examinations were performed on 52 horses and a measurement of the hard palate was taken. The study group was comprised of 27 mares, 24 geldings and 1 stallion. They were further divided into the age groups: 3-5 years (3), > 5-10 years (18), > 10-15 years (19), and > 15 years (12). Lastly, the groups were divided into the following breed categories: Quarter Horse, Thoroughbred, and Other. Analyses revealed that palate depth has a broad range that is not associated with any breed, age, or sex. Normal reference ranges were established for the data and suggests that the hard palate should be considered and measured when choosing a bit. Further research is necessary to determine which bits are best suited for each palate depth.

Orthodontic Inclined Plane Application Using a Visible Light Cure Acrylic Material for Treatment of Linguoverted Mandibular Canine Teeth.

Malocclusion is a common problem in dogs. Linguoverted canine teeth (class I malocclusion) can cause palatal defects, oronasal fistulae, dental wear, and periodontal disease. Mandibular distoclusion (class II malocclusion), in which the mandibular arch occludes caudal to its normal position relative to the maxillary arch, can further contribute to lingual displacement of mandibular canine teeth. Traditionally, a flowable self-curing bisacrylic composite material has been used. The method described here uses a light cure acrylic denture base material utilizing multiple customized segments to construct the appliance to the desired shape and size necessary to achieve a functional incline plane.

Sex and the frontal cortex: A developmental CT study in the spotted hyena.

The purpose of this study was to examine developmental and individual variation in total endocranial volume and regional brain volumes, including the anterior cerebrum, posterior cerebrum and cerebellum/brain stem, in the spotted hyena (Crocuta crocuta). The spotted hyena is a highly gregarious animal noted for living in large, hierarchically organized groups. The social lives of male and female spotted hyenas do not differ until after puberty, when males disperse from the natal group, while females remain philopatric. Here we sought to determine whether the divergent life histories of male and female spotted hyenas are linked to differences in brain size or organization. Three-dimensional virtual endocasts were created using computed tomography from 46 spotted hyenas skulls (23 females, 22 males, 1 unknown sex) ranging in age from 1 day to 18 years. Brain volume and skull length were highly correlated (r = 0.91), and both reached asymptotic values by 34 months of age. Analyses of total endocranial volume (relative to skull length) and cerebellum/brain stem volume (relative to total endocranial volume) revealed no sex differences. However, relative anterior cerebrum volume, comprised mainly of frontal cortex, was significantly greater in adult males than adult females, and relative posterior cerebrum volume was greater in adult females than adult males. We hypothesize that the demands of neural processing underlying enhanced social cognition required for successful male transfer between matriarchical social groups at dispersal may be greater than cognitive demands on philopatric females.

Quantitative assessment of brain volumes in fish: comparison of methodologies.

When correlating brain areas with behavioral and environmental characteristics, a variety of techniques are employed. In fishes (elasmobranchs and teleosts), 2 methods, histology and the idealized ellipsoid and/or half-ellipsoid technique, are primarily used to calculate the volume of a brain area and therefore its relationship to social or ecological complexity. In this study on a perciform teleost, we have quantitatively compared brain volumes obtained using the conventional techniques of histology and approximating brain volume to an idealized ellipsoid (or half ellipsoid) and magnetic resonance imaging, an established clinical tool typically used for assessing brain volume in other vertebrates. Our results indicate that, when compared to brain volumes measured using magnetic resonance imaging of brain regions in situ, variations in brain shape and histological artifacts can lead to significant differences in brain volume, especially in the telencephalon and optic tecta. Consequently, in comparative studies of brain volumes, we advise caution when using the histological and/or ellipsoid methods to make correlations between brain area size and environmental, behavioral and social characteristics and, when possible, we propose the use of magnetic resonance imaging.

Virtual reconstructions of the endocranial cavity of Rhea americana (Aves, Palaeognathae): postnatal anatomical changes.

We examined the external anatomy of the endocast of the Greater Rhea (Rhea americana, Palaeognathae), during 3 main stages of its postnatal life, and compared it with information available on other palaeognathous birds. Series of scans with spiral computed tomographies were obtained from 3 skulls of different ages (chick, juvenile and adult) of R. americana; digital 3-dimensional reconstruction was performed and brain volumes were calculated from the models obtained. Qualitative assessment of the brain anatomy of R. americana indicates a conical and ventrally located bulbus olfactorius, laterally expanded hemispherium telencephali, well-developed eminentia sagittalis, and conspicuous cerebellum and tectum mesencephali. Anatomy of the chick brain was markedly different: less lateral expansion of the hemispherium telencephali, and lesser development of the eminentia sagittalis and auricula cerebelli. Little change between chicks and adults was observed in some brain regions such as the tectum mesencephali, while the eminentia sagittalis showed great increase in size. The large size of the eminentia sagittalis coupled with its increasing development during ontogeny could reflect its importance for visual processing functions and the way these improve during growth. Finally, the brain of R. americana is similar to that of Struthio and Dromaius, but differs from that of the Tinamidae and of Apteryx, allowing recognition of 3 distinct brain morphologies among the Palaeognathae.

Using a specially designed cephalostat for longitudinal cephalometric studies in rats.

To better understand and observe craniofacial growth, researchers carry out longitudinal cephalometric studies on animals. The authors constructed a cephalostat specially designed to study craniofacial growth in rats. They describe and validate a cephalometric technique using this cephalostat. They carried out cephalometric radiography and analysis of 62 Wistar rats. By using this method, the authors were able to take repeated, reproducible intracranial, intramandibular and craniomandibular measurements of the rats. The proposed method is a useful tool for studying the craniofacial growth process.

A study on morphology and morphometric parameters on skull of the Bardhoka autochthonous sheep breed in Kosovo.

In this study, we aim to investigate the skull of Bardhoka sheep, which is the native breed of Kosovo by utilising normal morphometric methods. Differences between male and female were also statistically analysed. Further, the parameters that can be used in gender discrimination were also analysed. The statistical analysis was based on a sample of 24 adult skulls of Bardhoka breed with 12 female and 12 male skulls. Altogether, 31 different measurements were taken morphologically and 7 different indices were applied. Except for the measurement's values of the orbit, measurement's values of length of the cheek tooth row and the measurement's values of height of the foramen magnum, all the measured values of males were higher than females. Nasal index, cranium index and skull index values were statistically significant between both genders. It is envisaged that the findings of this study will motivate and assist other comparative studies with other autochthonous sheep and goat breeds found in the Dukagjini region or in clinical veterinary practice and even in zooarchaeology.

Markers of physiological stress in juvenile bonobos (Pan paniscus): are enamel hypoplasia, skeletal development and tooth size interrelated?

A reduction in enamel thickness due to disrupted amelogenesis is referred to as enamel hypoplasia (EH). Linear EH in permanent teeth is a widely accepted marker of systemic physiological stress. An enigmatic, nonlinear form of EH commonly manifest in great ape and human deciduous canines (dc) is known as localized hypoplasia of primary canines (LHPC). The etiology of LHPC and what it signifies-localized traumatic or systemic physiological stress-remains unclear. This report presents frequency data on LHPC, hypostotic cranial traits, and tooth size in a sample of juvenile bonobos, then tests hypotheses of intertrait association that improve knowledge of the etiology and meaning of LHPC. The fenestration hypothesis is tested using hypostotic cranial traits as a proxy for membrane bone ossification, and the relationship between tooth size, LHPC, and hypostosis is investigated. Macroscopic observations of EH, hypostotic traits, and measurements of buccolingual tooth size were conducted according to established standards. LHPC was found in 51.2% of bonobos (n = 86) and in 26% of dc teeth (n = 269). Hypostotic traits were observed in 55.2% of bonobos (n = 96). A test of the association between LHPC and hypostosis yielded nonsignificant results (chi(2) = 2.935; P = 0.0867). Primary canines were larger in specimens with LHPC than in unaffected specimens (paired samples t test; udc, P = 0.011; ldc, P = 0.018), a result consistent with the fenestration hypothesis of LHPC pathogenesis. Hypostosis was not associated with differences in tooth size (P > 0.05). LHPC may be an indirect indicator of physiological stress, resulting from large, buccally displaced primary canines.

A reliable positioning device for dorsoventral cephalometric radiography of the rat.

In dental research, dorsoventral cephalometric radiography is often used to assess skull growth and dental movement in rat models. To ensure that images can be reproduced, radiographers must use a cephalostat to maintain the rat's head in a consistent position across imaging sessions. The authors describe a positioning device they designed that connects easily to a standard dental X-ray machine. The device enabled researchers to position rats repeatedly for radiographic imaging with very little variation.

Geographical variation in skull morphology of gray-bellied squirrel Callosciurus caniceps.

The geographical variation of the gray-bellied squirrel (Callosciurus caniceps) was examined using osteometry of skull in Southeast Asia. From the principal component analysis (PCA), the plots of the northern localities from Nan to Kanchanaburi and those of the southern localities from Narathiwat to Kuala Lumpur in male were completely separated. In female, the plots of the locality from Uttradit to Kanchanaburi and those of the locality from Pattani to Negri Sembilan were completely separated. We called these northern localities and southern localities which are distinguished by the PCA as N group and S group. The size and shape of the skulls of these squirrels indicated the differences between N group and S group from t-test and U-test. These results may be influenced by the two transitions of the phytogeography around the southernmost locality in N group and the northernmost locality in S group in the peninsular Thailand and Malay Peninsula. Localities which are located between N and S groups were called the Middle (M) group. From the PCA among N, S groups and each locality of M group, the plots of localities such as Prachuap Khiri Khan, Chumphon, Krabi, Nakhon Si Thammarat and Trang in both sexes of M group could not be separated from those of N and S groups. We suggest that the sympatric distribution of N and S groups and the hybrid of N and S populations may be seen in these localities of M group.

Comparative observation of skeletal-dental abnormalities in wild, domestic, and laboratory rabbits.

Dietary habits must be considered as one of the major potential factors resulting in acquired malocclusions in rabbits. Although the dentition of the wild rabbit and the domesticated laboratory rabbit are basically identical, dietary habits are noticeably different. Therefore, the prevalence of tooth problems between these lagomorph species were investigated anatomically and radiographically. Mean measurements of the skull and dental arches suggested that wild rabbits have slightly shorter and wider skulls and dental arches compared with domestic laboratory rabbits. Root elongation of incisors and check teeth, and periodontal disease were more frequently observed in domestic laboratory rabbits. Diagnostic radiographs from domestic pet rabbits showed relatively higher crowns, severe root elongation, and advanced periodontitis. These results do not provide definitive evidence that dietary habits cause malocclusions, however they suggest that diet is a major factor in the initiation of malocclusions in rabbits.

Comparative skull anatomy of terrestrial and crevice-dwelling Trachylepis skinks (Squamata: Scincidae) with a survey of resources in scincid cranial osteology.

Skinks account for more than 25% of all lizard species; however, representatives of fewer than a quarter of all species have been characterized osteologically. All but a few of the available cranial descriptions concentrate solely on characters that can be seen externally on the intact skull. Mabuyid skinks of the genus Trachylepis are the dominant, fully limbed skinks in Sub-Saharan Africa, and nearly all species have the same generalized body plan. Although a few rock crevice-dwelling species possess slight body depression, extreme dorsoventral depression is observed only in Trachylepis laevis. We investigated the detailed skull anatomy of three Trachylepis skinks (T. laevis, T. sulcata, and T. gonwouoi, a recently described species allied to T. affinis) using high-resolution X-ray micro-computed tomography. Our goals were to review the scincid cranial osteology literature in a phylogenetic context, provide a detailed anatomical atlas for the mabuyid lineage, and investigate the morphological adaptations of the highly modified T. laevis. Our results demonstrate that there is significant morphological variation between these three taxa, including the loss and fusion of structures, as well as changes in the shape, scale, and relationship between individual elements. Trachylepis laevis possesses several osteological modifications that have produced a reducton in head depth that are likely functional consequences of extreme rupicolous habits, including a flat skull roof, many strongly recumbent elements, and a depressed neurocranium.We hypothesize these modifications may correspond to descreased bite force and increased capabilities of cranial kinesis. Our study is the first element-by-element description of a skink using computed tomography technology.

The Relationship between Brachycephalic Head Features in Modern Persian Cats and Dysmorphologies of the Skull and Internal Hydrocephalus.

BACKGROUND: Cat breeders observed a frequent occurrence of internal hydrocephalus in Persian cats with extreme brachycephalic head morphology. OBJECTIVE: To investigate a possible relationship among the grade of brachycephaly, ventricular dilatation, and skull dysmorphologies in Persian cats. ANIMALS: 92 Persian-, 10 Domestic shorthair cats. METHODS: The grade of brachycephaly was determined on skull models based on CT datasets. Cranial measurements were examined with regard to a possible correlation with relative ventricular volume, and cranial capacity. Persians with high (peke-face Persians) and lower grades of brachycephaly (doll-face Persians) were investigated for the presence of skull dysmorphologies. RESULTS: The mean cranial index of the peke-face Persians (0.97 ± 0.14) was significantly higher than the mean cranial index of doll-face Persians (0.66 ± 0.04; P < 0.001). Peke-face Persians had a lower relative nasal bone length (0.15 ± 0.04) compared to doll-face (0.29 ± 0.08; P < 0.001). The endocranial volume was significantly lower in doll-face than peke-face Persians (89.6 ± 1.27% versus 91.76 ± 2.07%; P < 0.001). The cranial index was significantly correlated with this variable (Spearman's r: 0.7; P < 0.0001). Mean ventricle: Brain ratio of the peke-face group (0.159 ± 0.14) was significantly higher compared to doll-face Persians (0.015 ± 0.01; P < 0.001). CONCLUSION AND CLINICAL RELEVANCE: High grades of brachycephaly are also associated with malformations of the calvarial and facial bones as well as dental malformations. As these dysmorphologies can affect animal welfare, the selection for extreme forms of brachycephaly in Persian cats should be reconsidered.

Scaling of bite force in the blacktip shark Carcharhinus limbatus.

Although bite force is a frequently studied performance measure of feeding ecology, changes in bite force over ontogeny have rarely been investigated. Biting by the blacktip shark Carcharhinus limbatus was theoretically modeled over ontogeny to investigate the scaling of bite force, the morphological basis of the observed scaling relationship, the ecological consequences of ontogenetic changes in performance, and whether cranial morphometrics can be used as an accurate proxy for bite force. Theoretical bite force, which was positively allometric with respect to total length (TL), ranged from 32 N (61 cm TL) to 423 N (152 cm TL) at the anterior tips of the jaws and from 107 (61 cm TL) to 1083 N (152 cm TL) at the posterior teeth. This observation is attributed to positive allometry in the mechanical advantage of the jaw-adducting mechanism and the cross-sectional area of all four jaw-adducting muscles. Theoretical bite force was accurately predicted by cranial morphometrics including prebranchial length and head width as well. Although positive allometry of bite force in C. limbatus would seem to indicate an ecological necessity for this phenomenon, dietary analyses do not necessarily indicate any ontogenetic shift in prey types requiring larger bite forces. The positively allometric increase in theoretical bite force may be associated with numerous other selective pressures including maintenance of an apical position within the ecosystem.