Changes in the alveolar bone morphology among different patterns of incisor inclination during the alignment phase in orthodontic treatment without premolar extraction.

OBJECTIVE: The present study investigated bone remodelling in the upper and lower incisor regions depending on the inclination pattern during the alignment phase of orthodontic treatment (OT). MATERIALS AND METHODS: This prospective clinical study included 71 patients undergoing OT without premolar extraction. Cone beam computed tomography scans were taken before and after the alignment phase and the changes in the inclination, alveolar bone height (ABH) and bone thickness (BT) at levels 2, 3, 4, 6, 8 and 9 mm starting from the cementoenamel junction (CEJ) were determined. RESULTS: Teeth were divided into 'Retroinclination' (lingual crown inclination <0°), 'Proclination-low' (buccal crown inclination between 0° and 5°), or 'Proclination-high' (buccal crown inclination >5°). The alignment phase of OT resulted in ABH loss. The highest ABH loss in the maxilla was observed on the buccal side in the 'Proclination-high' and was 0.71 mm. ABH loss by 1.1 mm was observed in the mandible on the lingual side in the 'Retroinclination' group. The most significant changes in BT by up to 2 mm were observed at levels 6, 8 and 9 mm and these changes exhibited a moderate to strong correlation with the alterations in the inclination of individual incisors. At levels 2, 3 and 4 mm, the highest decrease in BT by up to 0.83 mm was observed on the palatal side of upper incisors in the 'Proclination-high' group. CONCLUSION: The direction and amount of tooth inclination partially determine changes in the bone parameters during the alignment phase.

Appropriate timing of treatment contributes to better root development of impacted anterior teeth in children.

INTRODUCTION: This study investigated the effects of different timings of orthodontic treatment on the root development of impacted anterior teeth in children. METHODS: The cone-beam computed tomography (CBCT) data of 45 children with impacted anterior teeth were divided into unformed root (UR) group or basically formed root (BFR) group to evaluate root length (RL) and root growth length (RGL) of impacted teeth and contralateral nonimpacted teeth pretreatment and posttreatment. In addition, 22 patients with impacted dilaceration were selected to assess the effects of the crown-root angle and root development stage on RL and RGL. The Student t test, Wilcoxon test, analysis of variance, and multiple linear regression analysis were used for statistical evaluations. RESULTS: The RL of treated impacted teeth pretreatment and posttreatment was significantly shorter than contralateral nonimpacted teeth values (P <0.05). Posttreatment, the RL and RGL of impacted teeth of the UR group were significantly greater than those of the BFR group (P <0.05). The RGL of the dilacerated root in the UR group was considerably higher than in the BFR group (P <0.05). The larger crown-root angle group had a longer posttreatment RL (P <0.05). Multiple linear regression analysis revealed that the Nolla stage of impacted teeth and RL of contralateral teeth pretreatment significantly influenced the RL of impacted teeth posttreatment. CONCLUSIONS: Prompt orthodontic treatment is necessary for children with impacted anterior teeth to release the impacted state and achieve better root development. The root length of a dilacerated tooth continued to develop under treatment, but the crown-root angle partly constrained it.

Does crown, root, and bone visualization in a clear aligner virtual setup impact treatment decisions?

INTRODUCTION: Clear aligner technology based on a machine learning algorithm is currently available for orthodontic treatment. Treatment planning on the basis of 3-dimensional crown, root, and bone imaging is claimed to provide accurate diagnosis and better treatment outcomes for adult patients with complex needs. This study aimed to answer the following questions: (1) would practitioners modify their original treatment plan once provided with the crown, root, and bone view? and (2) does practitioner satisfaction regarding treatment outcomes change once the crown, root, and bone view is provided? METHODS: An online questionnaire was emailed to members of the American Association of Orthodontists (n = 2300) and the Virginia Orthodontic Education and Research Foundation (n = 211). The survey consisted of videos of 4 patients shown in 2 presentations: crown-only and crown, root, and bone views, generated by artificial intelligence-driven treatment planning software (3D Predict aligner system; 3D Predict, New York, NY). Respondents were asked to answer treatment-related questions and rate the treatment outcomes using a visual analog scale. Statistical analyses were completed to determine the significance of crown, root, and bone view on treatment planning with clear aligners. RESULTS: A total of 70 orthodontists participated in the survey. There were significant differences in responses when viewing patients in crown-only and crown, root, and bone presentations. Across the 4 patients, 33%-43% of practitioners changed their sentiment toward the treatment plan (P <0.001). When rating satisfaction on the 100-point scale, average ratings changed by 10.6 to 21.0 points; both increases and decreases in satisfaction were seen across the patients (P <0.001). CONCLUSIONS: When given 3-dimensional information on the position of a patient's crowns, root, and bone coverage, orthodontists are likely to change their clear aligner treatment plan. This study showed that a confirmation of dehiscence and fenestrations using the root and bone view resulted in practitioner dissatisfaction despite an initial satisfaction with the crown-only view.

3D intraoral scanning techniques support the effects of crown morphology on dental caries.

BACKGROUND: With the development and utilization of three-dimensional (3D) intraoral scanning (IOS) technology, the morphological characteristics of teeth were quantitatively assessed. In this research, we aimed to explore the prevalence of dental caries in relation to each measurable morphological indicator of the tooth body via 3D intraoral scanning techniques. METHODS: A hospital-based single-centre study was conducted at our hospital from Dec. 2021 to Apr. 2023. A total of 53 patients were involved in the study, providing complete morphological data for 79 teeth. Each patient completed an oral hygiene routine questionnaire and underwent examination by an experienced dentist to evaluate caries conditions before undergoing 3D intraoral scanning to obtain a digital dental model. Geomagic Studio 2014 was used to extract oral morphological data from the models. The acquired data were entered, cleaned and edited using Excel 2016 and subsequently exported to SPSS version 25.0 for analysis. Chi-square analysis and logistic regression analyses were employed to test the associations. RESULTS: Among the participants, 33 (61.1%) were female, with a mean age of 26.52 ± 10.83 years. Significant associations were found between dental caries and the vertical distance between the distal tip and the gum (OR 14.02; 95% CI 1.80-109.07; P = 0.012), the distal lateral horizontal distance of occlusion (OR 0.40; 95% CI 0.18-0.90; P = 0.026), and the mesial horizontal distance of occlusion (OR 2.20; 95% CI 1.12-4.31; P = 0.021). The Hosmer-Lemeshow test indicated a P value of 0.33. CONCLUSIONS: The vertical distance between the distal tip and the gum, the distal lateral horizontal distance of the occlusion and the mesial horizontal distance of the occlusion were the influencing factors for dental caries (identified as independent risk factors). We hypothesize that these factors may be associated with the physiological curvature of teeth and the role of chewing grooves in plaque formation over time. However, further studies involving larger population samples and more detailed age stratification are still needed.

Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

A Radiographic Study of the Root-to-Crown Ratio of Natural Permanent Teeth in 81 Saudi Adults.

BACKGROUND The ratio between a tooth root and its crown is an essential diagnostic parameter that determines treatment options. This radiographic study used panoramic dental radiographs or orthopantograms to measure the mean root (R)-to-crown (C) ratios (R/C) of the permanent teeth in 81 Saudi adults. MATERIAL AND METHODS A total of 81 panoramic radiographs of Saudi adult patients (40 males and 41 females) previously treated in the College of Dentistry, Saudi Arabia, aged 16-35 years, were selected. The crown height and root length for each tooth were measured on the digital panoramic radiographs. The correlation coefficient (intra-class) was calculated to assess the intra-examiner reproducibility and a good agreement was achieved (ICC=0.79-0.89). RESULTS For both males and females, the highest mean R/C ratio was for maxillary canine (1.91) and for mandibular second premolar (2.0) while the lowest R/C ratio was for maxillary first molar (1.64) and for mandibular central incisor (1.59). Except for the maxillary second premolar, no significant differences in R/C ratios were observed for maxillary arch. In the mandibular arch, the R/C ratio for lateral incisor, both premolars, and molars differed significantly (P<0.05). Among males, statistically significant differences between teeth existed in R/C ratios for central and lateral incisors, second premolar, and both molars (P>0.05). For females, significant differences between teeth in R/C ratios were observed for both premolars and both molars (P>0.05). CONCLUSIONS This study supports the findings from previous studies that orthopantograms can be used to calculate root/crown ratios, which varies between males and females and the dental arch among Saudi adults.

Three-dimensional digital evaluation of tooth symmetry and volume in patients with missing and peg-shaped maxillary lateral incisors.

INTRODUCTION: This study aimed to evaluate the 3-dimensional tooth crown symmetry and the crown volumes of maxillary and mandibular teeth in patients with unilateral or bilateral missing or peg-shaped maxillary lateral incisors. METHODS: Six groups were established for the possible clinical variations in patients with unilateral missing or peg-shaped maxillary lateral incisors, bilateral presence of these tooth anomalies, and a control group (CG) with normal lateral incisors. The study was conducted on digital dental models of 132 patients. The morphologic symmetry of the antimere teeth was investigated using 3-dimensional deviation analysis. Volumes of contralateral teeth were compared within and among groups for the maxilla and mandible. Furthermore, volumes of teeth were compared in missing and peg-shaped quadrants and quadrants of CG. Intergroup differences were tested using one-way analysis of variance and Kruskal-Wallis tests, whereas paired t and Wilcoxon tests were used for parametric and nonparametric variables, respectively, for intragroup comparisons. RESULTS: Significant deviations in symmetry of antimere teeth were not detected (P >0.05). The volumes of mandibular central and lateral incisors in missing or peg-shaped lateral incisor groups were smaller than in the CG (P <0.05). Per quadrant analysis, volumes of the maxillary central incisor and mandibular central incisors, canines, and first molars in quadrants with missing or peg-shaped lateral incisors were smaller than in the control quadrants (P <0.05). CONCLUSIONS: Neither unilateral nor bilateral presence of missing or peg-shaped maxillary lateral incisors affected the morphologic symmetry of antimere teeth but did affect tooth volume, especially in the mandibular arch.

Dental age estimation based on pulp chamber/crown volume ratio measured on CBCT images in a Spanish population.

Dental age estimation in living individuals is one of the most frequent requests undertaken by forensic odontologists. The aim of this study was to estimate the dental age by pulp/tooth volume ratio, as measured on cone beam computed tomography (CBCT) images, in a Spanish population. This study included 313 teeth from 107 adult individuals, 56 females and 51 males with a mean age of 44 ± 14 years. The statistical analysis of the results took account of clustering (multiple teeth in individuals). Linear regression models were constructed on the relationship between pulp/tooth volume ratio and chronological age for each tooth type. The highest coefficient of determination (R2) value was provided by the upper incisors (36.6%), and the difference between chronological and estimated age was less than 5 years in 31.3% of the sample and less than 10 years for 65.7%. CBCT is an accurate imaging technique to measure dental volume with a relatively low radiation dose, and it can be used to assess dental age in living adult individuals. Volumetric changes in the pulp cavity with increasing age proved valuable to estimate dental age in this Spanish population.

Displacement of the Inferior Alveolar Bundle Secondary to Post Coronectomy Root Migration: A Case Report.

Intentional coronectomy has become a commonplace procedure as an alternative to full third molar removal in order to decrease the occurrence of inferior alveolar nerve (IAN) injury. It is well known that one of the sequelae of this procedure is superior root migration. This is usually not a significant problem as the migrated roots may erupt to a position where they are more readily removed. This report presents a case in which a curvature at the apex of the root displaced the IAN causing neurologic symptoms.

Usability of dental pulp visibility and tooth coronal index in digital panoramic radiography in age estimation in the forensic medicine.

Age estimation has a great importance due to legal requirements. The aim of our study was to determine the applicability of two different methods in age estimation; one of them based on the calculation of the visibility of the root pulp of mandibular third molar teeth and the other based on the calculation of the tooth coronal index (TCI) in the mandibular first and second molar teeth in the 9059 digital orthopantomogram of people aged between 15 and 40 in Bursa. In the first method in which the visibility of the fully mineralized root pulp of the mandibular third molar teeth was evaluated in 4 stages; the stages 0, 1, 2, and 3 were observed regardless of sex at the earliest 17.2; 19.1; 20.1, and 25.1 years, respectively. In the second method in which TCI was regressed on chronological age using measuring crown and coronal pulp cavity heights, the most accurate age estimation model based on simple linear regression for all cases without any sex difference was found to be with right first molar tooth (SEE ±7304 years) and the most accurate age model based on multiple regression model was found to be with bilateral first molar teeth (SEE ±7413 years). In conclusion, we believe that the root pulp visibility of the third molar teeth can be applied safely for stages 1, 2, and 3 at 16, 17, and 21 years of ages, respectively. A correlation was also found between TCI and age, and our findings have shown that both methods are available for forensic purposes.

Can we estimate root axis using a 3-dimensional tooth model via lingual-surface intraoral scanning?

INTRODUCTION: This research aimed to compare the estimation error of the root axis using 3-dimensional (3D) tooth models at the midtreatment stage between the whole-surface scan (WSS) and lingual-surface scan (LSS) methods. METHODS: The sample consisted of 208 teeth (26 each of central incisors, canines, second premolars, and first molars in the maxillary and mandibular dentition) from 13 patients whose pre- and midtreatment intraoral scan and cone-beam computed tomography (CBCT) were available. The 3D tooth models were constructed by merging the intraoral-scan crowns and the CBCT-scan roots obtained at the pretreatment stage. To estimate the root axis at the midtreatment stage, we superimposed the individual 3D tooth models onto the midtreatment intraoral scan obtained by the WSS and LSS methods. The midtreatment CBCT scan was used as the gold standard to determine the real root axis. The estimated root axis in terms of mesiodistal angulation and buccolingual inclination was measured in the WSS and LSS methods, and statistical analysis was performed. RESULTS: The estimation errors of the mesiodistal angulation and buccolingual inclination were <2.0° in both methods. The LSS method demonstrated a statistically larger but clinically insignificant estimation error than the WSS method in the mandibular canine (mesiodistal angulation, 1.95° vs 1.62°) and the total tested teeth (mesiodistal angulation, 1.40° vs 1.29°; buccolingual inclination, 1.51° vs 1.41°). CONCLUSIONS: Because the estimation errors of the root axis angle using the 3D tooth model by the WSS and LSS methods were within the clinically acceptable range, the root axis can be estimated by both methods.

Treatment of peri-invagination lesion and vitality preservation in an immature type III dens invaginatus: a case report.

BACKGROUND: To report a case of type III dens invaginatus associated with peri-invagination periodontitis in an immature permanent mandibular central incisor with open apex, in which only the invagination area was treated and vitality was preserved. CASE PRESENTATION: A 9-year-old boy was referred complaining of pain in the mandibular left central incisor. After radiographic examination, an invagination into the pulp chamber of the tooth associated with periapical radiolucency was detected. Endodontic access was performed and the orifice was identified under a dental operating microscope. The invagination area was chemo-mechanically cleaned. After 1 week, the invagination was obturated with mineral trioxide aggregate. During the 2-year follow up period, the tooth was asymptomatic. Radiographic examination revealed significant progression of periapical healing and root development in the main root canal of the tooth. CONCLUSION: Non-surgical root canal treatment of the invagination may preserve pulp vitality, and continuous root development of the tooth.

3D evaluation of tooth crown size in unilateral cleft lip and palate patients.

AIM: The aim of this retrospective study is to evaluate and compare the 3-dimensional (3D) crown sizes of the left and right sides of upper and lower dental arches in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: Dental casts of 94 patients all in permanent dentition were included in this study. Dental casts were divided into three groups as 36 casts with unilateral left cleft lip and palate (ULCLP), 18 casts with unilateral right cleft lip and palate (URCLP), and 40 casts without cleft (control). Mesiodistal (MD), buccolingual (BL), and gingiva incisal (GI) values of each tooth were measured by scanning the dental models with a high-precision optical 3D scanner. Paired t-test and independent t-test were used for statistical analysis. RESULTS: U1 MD, U6 MD (P = 0.001) and BL (P = 0.01), L3 GI (P = 0.05) were greater in UCLP patients on the non-cleft side while U1 GI, L1 BL, L5 MD (P = 0.001), L4 MD, and BL (P = 0.01) values were found to be greater on the cleft side. Comparison of the cleft-sides and the control group showed that MD, BL, and GI dimensions of teeth on the cleft sides were generally found to be smaller, excluding the UR7 GI values for URCLP group (P = 0.05). CONCLUSION: In the measurements of teeth size, reliable and repeatable results were acquired through 3D software. Tooth size asymmetries can occur non-syndromic UCLP patients in both jaws. MD, BL, and GI dimensions of teeth are mostly found to be smaller in patients with CLP.

Variation of 3D outer and inner crown morphology in modern human mandibular premolars.

OBJECTIVES: This study explores the outer and inner crown of lower third and fourth premolars (P3 , P4 ) by analyzing the morphological variation among diverse modern human groups. MATERIALS AND METHODS: We studied three-dimensional models of the outer enamel surface and the enamel-dentine junction (EDJ) from µCT datasets of 77 recent humans using both an assessment of seven nonmetric traits and a standard geometric morphometric (GM) analysis. For the latter, the dental crown was represented by four landmarks (dentine horns and fossae), 20 semilandmarks along the EDJ marginal ridge, and pseudolandmarks along the crown and cervical outlines. RESULTS: Certain discrete traits showed significantly different regional frequencies and sexual dimorphism. The GM analyses of both P3 s and P4 s showed extensive overlap in shape variation of the various populations (classification accuracy 15-69%). The first principal components explained about 40% of shape variance with a correlation between 0.59 and 0.87 of the features of P3 s and P4 s. Shape covariation between P3 s and P4 s expressed concordance of high and narrow or low and broad crowns. CONCLUSIONS: Due to marked intragroup and intergroup variation in GM analyses of lower premolars, discrete traits such as the number of lingual cusps and mesiolingual groove expression provide better geographic separation of modern human populations. The greater variability of the lingual region suggests a dominance of functional constraints over geographic provenience or sex. Additional information about functionally relevant aspects of the crown surface and odontogenetic data are needed to unravel the factors underlying dental morphology in modern humans.

Accuracy of in vitro mandibular volumetric measurements from CBCT of different voxel sizes with different segmentation threshold settings.

BACKGROUND: To determine the accuracy of volumetric measurements of the mandible in vitro by cone-beam computed tomography (CBCT) and to analyze the influence of voxel sizes and segmentation threshold settings on it. METHODS: The samples were obtained from pig mandibles and scanned with 4 voxel sizes: .125 mm, .20 mm, .30 mm, and .40 mm. The minimum segmentation thresholds in Hounsfield units (HU) were set as 0, 100, 200, 300, and 400, respectively, for each voxel size for 3D reconstruction. Laser scanning as the reference, the volumes of each CBCT scanning, the mean iterative distances of superimposition and total positive and negative deviations were recorded and compared. RESULTS: The volumes of CBCT-scan deviated from those of laser-scan by + 7.67% to - 3.05% with different HU and voxel sizes. The deviation increased with the voxel size. There was a more suitable minimum HU threshold of segmentation (HU100 for .125 mm, 200 for .20 mm, 300 for .30 mm, and 400 for .40 mm) for each voxel size. CONCLUSIONS: Voxel sizes and Hounsfield unit thresholds influence the accuracy of volumetric measurements in CBCT scanning. The volume increase with the voxel size, and different voxel sizes correspond to different optimal Hounsfield unit thresholds.

Radiographic assessment of the relationship between root canal treatment quality, coronal restoration quality, and periapical status.

OBJECTIVE: The aim of this cross-sectional study was to assess the prevalence of apical periodontitis in root canal treated teeth in Turkish subpopulation and to evaluate the effects of both coronal restoration quality and root canal treatment (RCT) quality on apical periodontitis. MATERIALS AND METHODS: Panoramic images of individuals who applied to our department for different diagnostic reasons were randomly and retrospectively scanned. Total RCT number, RCT quality, type of coronal restoration, restoration quality, periapical status, and total number of teeth were recorded. The criteria used for coronal restorations quality and RCT quality were defined by De Moor et al. and slightly modified by Gunduz et al. Periapical status was assessed by the periapical index developed by Orstavik et al. Pearson's Chi-square test was used for statistical analysis, and the intraobserver agreements were assessed by Kappa coefficients. Values of P < 0.05 were accepted to be meaningful. RESULTS: The total examined teeth number was 6064, of which had 541 (8.9%) RCT. The prevelance of apical periodontitis was 40.5%. The number of adequate RCT was 178 (32.9%), and 138 (77.5%) of them were healthy. The number of adequate coronal restoration was 334, and 62.3% of them were healthy. For the cases that have adequate coronal restorations, there was statistically significant relationship between adequate RCT and periapical status (P < 0.001). CONCLUSION: The prevelance of apical periodontitis was 40.5% and there was statistically significant relationship between adequate RCT and periapical status.

Combined orthodontic, surgical, and restorative approach to treat a complicated crown-root fracture in a maxillary central incisor.

This case report shows the treatment of a severe traumatic tooth injury. For the maxillary right central incisor, the trauma was considered a complicated crown-root fracture. The level of the fracture line, the length of the remaining root segment, and the presence and condition of the tooth fragment determined the type of therapy. Traumatized teeth with fractures below the alveolar crest are often considered hopeless. As this report shows, the treatment of a complicated crown-root fracture in the esthetic region can be challenging. Orthodontic extrusion and crown-length surgery were performed to bring the fracture line above the alveolar bone crest. A multidisciplinary approach was required for complete rehabilitation of the traumatized maxillary incisor. Suggestions are made to improve treatment planning of complicated crown-root fractures.

[Dental morphological and metric characteristics in contemporary and historical population of Târgu Mureș]. / Fogak morfológiai és metrikus jellegzetességeinek vizsgálata marosvásárhelyi középkori leleteken és a jelenkori helyi populáció körében.

INTRODUCTION: Teeth, as an integral part of human organism, are not exceptions from the physical anthropology changes caused by biological evolution and the way of living. Different stress factors and the natural selection are contributing to the emphasis of certain morphological characteristics. AIM: Comparison of dental metric characteristics and the presence of accessory tooth cusps between human remains from the Middle Ages and dental study models of today's patients. MATERIAL AND METHOD: Morphological characteristics of 132 teeth from 19 skulls and 694 teeth on dental models of 30 patients were examined. The mesiodistal, incisivocervical and buccolingual diameters of crowns were measured by a validated 2D image analysis method. Carabelli and talon cusps were also examined using a magnifying glass. RESULTS: Statistically significant differences between the size of the 14th-century and the present-day teeth were found in some of the teeth groups. In medieval artifacts, lateral teeth had smaller crown width than teeth measured in the contemporary population. The Carabelli cusps found in the archeological human remains belonged to grades 1 and 3 on Dahlberg scale (23.07%), while the Carabelli cusps observed in the contemporary group belonged to grades 3, 4, 5, 6 and 7 (50.90%). Talon cusp occurred only once in the contemporary group. CONCLUSION: In case of the contemporary teeth, the Carabelli cusps appeared in a more pronounced morphological form and with a higher frequency, which emphasizes the European origin of today's population. Orv Hetil. 2018; 159(30): 1235-1240.

Evaluation of Teeth Development in Unilateral Cleft Lip and Palate Patients in Mixed Dentition by Using Medical Image Control Systems.

OBJECTIVES: The aim of this study was to evaluate the crown and root development in patients with cleft lip and palate using medical software programmes. MATERIALS AND METHODS: In our study, 25 patients with mixed dentition unilateral cleft lip and palate were examined with cone-beam computed tomography (CBCT). The tomography images obtained as high resolution medical images on the computer control system (MIMICS 15.0, Materialise, Leuven, Belgium and SOLIDWORKS 2014 Premium, Concord, Massachusetts) were converted to three-dimensional volumetric images. These three-dimensional images of the cleft on the sides of the teeth in the crown and root growth were measured by mesiodistal length and crown/root rate with volume and area. These measurements were compared with a control group of healthy individuals. RESULTS: There were no statistically significant differences in the volume, surface area and MD size, crown/root ratio of central incisor, canine, first premolar and second premolar teeth within defect, and healthy teeth. However, it was found that there was a significant difference between the volume, surface area and MD size, and crown/root ratio of the lateral teeth in each group. CONCLUSION: In particular, among patients with cleft lip and palate, on obtaining a solid model of the tooth structure by using these programs, tooth development can be examined in more detail, diagnosis can be made more reliable, as well as in treatment planning. We believe that these programs can be used to resolve certain limitations such as a lack of an application to be used in routine dental treatment and in particular the need to do more study.

Does Bone Grafting Improve Outcomes in Coronectomy Surgery? Long-Term (5- to 9-Year) Clinical and Radiographic Follow-Up of 78 Adult Patients.

PURPOSE: To report the long-term outcomes of 78 adult patients who underwent coronectomy with bone grafting (CWG) of the bony crypt. MATERIALS AND METHODS: Seventy-eight patients with follow-up of at least 5 to 9 years underwent CWG. Preoperative imaging and probing depths were recorded, as were yearly follow-up radiographs or cone-beam computed tomograms and yearly postoperative probing depths. RESULTS: Periodontal probing depths and bone levels on the distal surfaces of adjacent mandibular molars showed marked improvement compared with preoperative probing depths and bone levels. All retained roots maintained their immediate postoperative positions with no migrations and no reoperations required. CONCLUSION: CWG is a predictable procedure that should be considered for patients at risk for developing sensory disturbances or for those with deeper (>4 mm) preoperative probing depths on the distal surfaces of the adjacent molars. Adding bone graft appears to aid in preventing root migration and decreasing probing depths on the distal surfaces of adjacent molars.