Multiple strategies for metabolic engineering of Escherichia coli for efficient production of glycolate.

Glycolate is a bulk chemical with wide applications in the textile, food processing, and pharmaceutical industries. Glycolate can be produced from glucose via the glycolysis and glyoxylate shunt pathways, followed by reduction to glycolate. However, two problems limit the productivity and yield of glycolate when using glucose as the sole carbon source. The first is a cofactor imbalance in the production of glycolate from glucose via the glycolysis pathway, since NADPH is required for glycolate production, while glycolysis generates NADH. To rectify this imbalance, the NADP+ -dependent glyceraldehyde 3-phosphate dehydrogenase GapC from Clostridium acetobutylicum was introduced to generate NADPH instead of NADH in the oxidation of glyceraldehyde 3-phosphate during glycolysis. The soluble transhydrogenase SthA was further eliminated to conserve NADPH by blocking its conversion into NADH. The second problem is an unfavorable carbon flux distribution between the tricarboxylic acid cycle and the glyoxylate shunt. To solve this problem, isocitrate dehydrogenase (ICDH) was eliminated to increase the carbon flux of glyoxylate and thereby improve the glycolate titer. After engineering through the integration of gapC, combined with the inactivation of ICDH, SthA, and by-product pathways, as well as the upregulation of the two key enzymes isocitrate lyase (encoding by aceA), and glyoxylate reductase (encoding by ycdW), the glycolate titer increased to 5.3 g/L with a yield of 1.89 mol/mol glucose. Moreover, an optimized fed-batch fermentation reached a titer of 41 g/L with a yield of 1.87 mol/mol glucose after 60 h.

Use of Index-Based Screening Models to Evaluate the Leaching of Triclopyr and Fluroxypyr Through a Loam Soil Amended with Vermicompost.

The effect of vermicompost added to a loam soil on the leaching behaviour of two herbicides (triclopyr and fluroxypyr) was examined. Mobility of the herbicides was assessed using disturbed soil columns under laboratory conditions. In both cases, the addition of vermicompost significantly increased the sorption of the compounds. For both, DT50 values were slightly higher in the amended soil, due to the increased adsorption. Rate constants (k) calculated according to pseudo-first order model were significantly lower in the case of triclopyr (very persistent), which led to a much lower degradation rate compared to fluroxypyr (persistent) in both unamended and amended soils. Values calculated for the experimental leaching index (ELI) in unamended and amended soils showed medium and high leachability for fluroxypyr (0.31 and 0.29) and triclopyr (0.72 and 0.70), respectively. Other index-based screening models (GUS, RLPI, LIX) also catalogue both herbicides as potential leachers. Results confirm that triclopyr and fluroxypyr may contaminate groundwater resources.

Residue determination of triclopyr and aminopyralid in pastures and soil by gas chromatography-electron capture detector: Dissipation pattern under open field conditions.

In this study, a new method for the simultaneous quantitative determination of triclopyr and aminopyralid in forage grass, hay, and soil was developed and validated using gas chromatography coupled with electron capture detector (GC-ECD). In this method, a simple and maneuverable esterification reaction was applied to convert the two acidic herbicides into their ester form with methanol. The target compounds were extracted with 1% hydrochloric acid-acetonitrile, esterified, purified by florisil solid-phase extraction cartridge, and detected in a single run by the GC-ECD. The average recoveries using this method, at different fortified levels, ranged from 80% to 104% with intra-day and inter-day RSDs in the range of 1.2-10.8% and 3.3-10.3% for both the herbicides, respectively. The LODs were below 0.02 mg/kg while the LOQs were below 0.05 mg/kg, both of which were much lower than the maximum residue limits (MRLs) of 25-700 mg/kg in pastures, as established by the USA (the code of federal regulations). The open field dissipation and residual analysis in pastures and soil were conducted with the commercial formulation at two locations. With time, both triclopyr and aminopyralid dissipated via first-order kinetics. In forage grass, both compounds degraded rapidly over the first 14- or 21-d period and at a slow rate over the remainder of experimental days. In soil, they degraded at a relatively slow rate, and dissipated steadily to below or close to the LOQ by 60-d post application. The half-lives of triclopyr were 1.4-1.8 d and 6.2-9.0 d and aminopyralid were 1.7-2.1 d and 8.2-10.6 d in terms of forage grass and soil, respectively. The terminal residue results indicated that on 7 d after the treatment, the residues of aminopyralid and triclopyr in forage grass and hay were lower than the MRLs set by the USA. This work can provide guidance on the reasonable use of these herbicides and also provide an analytical method for the determination of triclopyr and aminopyralid in pasture and soil.

Winery biomass waste degradation by sequential sonication and mixed fungal enzyme treatments.

To increase the efficiency of winery-derived biomass biodegradation, grape pomace was ultrasonicated for 20min in the presence of 0.25M, 0.5Mand1.0MKOH and 1.0MNaOH. This was followed by treatment with a 1:1 (v/v) mix of crude enzyme preparation derived from Phanerochaete chrysosporium and Trametes versicolor for 18h and a further 18h treatment with a 60:14:4:2 percent ratio combination of enzymes derived from Aspergillus niger: Penicillium chrysogenum: Trichoderma harzianum: P. citrinum, repsectively. Process efficiency was evaluated by its comparison to biological only mixed fungal degradation over 16days. Ultrasonication treatment with 0.5MKOH followed by mixed enzyme treatment yielded the highest lignin degradation of about 13%. Cellulase, ß-glucosidase, xylanase, laccase and lignin peroxidase activities of 77.9, 476, 5,390.5, 66.7 and 29,230.7U/mL, respectively, were observed during biomass degradation. Gas chromatography-mass spectrometry (GC-MS) analysis of the degraded material identified commercially important compounds such as gallic acid, lithocholic acid, glycolic acid and lactic acid which were generated in considerable quantities. Thus, the combination of sonication pre-treatment and enzymatic degradation has the potential to considerably improve the breakdown of agricultural biomass and produce commercially useful compounds in markedly less time (<40h) with respect to biological only degradation (16days).

Runoff of the herbicides triclopyr and glufosinate ammonium from oil palm plantation soil.

This study focused on the residue detection of the herbicides triclopyr and glufosinate ammonium in the runoff losses from the Tasik Chini oil palm plantation area and the Tasik Chini Lake under natural rainfall conditions in the Malaysian tropical environment. Triclopyr and glufosinate ammonium are post-emergence herbicides. Both herbicides were foliar-sprayed on 0.5 ha of oil palm plantation plots, which were individualized by an uneven slope of 10-15%. Samples were collected at 1, 3, 7, 15, 30, 45, 60, 90, and 120 days after treatment. The concentrations of both herbicides quickly diminished from those in the analyzed sample by the time of collection. The highest residue levels found in the field surface leachate were 0.031 (single dosage, triclopyr), 0.041 (single dosage, glufosinate ammonium), 0.017 (double dosage, triclopyr), and 0.037 µg/kg (double dosage, glufosinate ammonium). The chromatographic peaks were observed at "0" day treatment (2 h after herbicide application). From the applied active ingredients, the triclopyr and glufosinate losses were 0.025 and 0.055%, respectively. The experimental results showed that both herbicides are less potent than other herbicides in polluting water systems because of their short persistence and strong adsorption onto soil clay particles.

Tracking the processing of damaged DNA double-strand break ends by ligation-mediated PCR: increased persistence of 3'-phosphoglycolate termini in SCAN1 cells.

To track the processing of damaged DNA double-strand break (DSB) ends in vivo, a method was devised for quantitative measurement of 3'-phosphoglycolate (PG) termini on DSBs induced by the non-protein chromophore of neocarzinostatin (NCS-C) in the human Alu repeat. Following exposure of cells to NCS-C, DNA was isolated, and labile lesions were chemically stabilized. All 3'-phosphate and 3'-hydroxyl ends were enzymatically capped with dideoxy termini, whereas 3'-PG ends were rendered ligatable, linked to an anchor, and quantified by real-time Taqman polymerase chain reaction. Using this assay and variations thereof, 3'-PG and 3'-phosphate termini on 1-base 3' overhangs of NCS-C-induced DSBs were readily detected in DNA from the treated lymphoblastoid cells, and both were largely eliminated from cellular DNA within 1 h. However, the 3'-PG termini were processed more slowly than 3'-phosphate termini, and were more persistent in tyrosyl-DNA phosphodiesterase 1-mutant SCAN1 than in normal cells, suggesting a significant role for tyrosyl-DNA phosphodiesterase 1 in removing 3'-PG blocking groups for DSB repair. DSBs with 3'-hydroxyl termini, which are not directly induced by NCS-C, were formed rapidly in cells, and largely eliminated by further processing within 1 h, both in Alu repeats and in heterochromatic α-satellite DNA. Moreover, absence of DNA-PK in M059J cells appeared to accelerate resolution of 3'-PG ends.

Solid-state UV-MALDI mass spectrometric quantitation of fluroxypyr and triclopyr in soil.

The work presented here refers firstly to solid-state UV-MALDI-Orbitrap-mass spectrometric analysis of fluroxypyr (A) and triclopyr (B) in soils under laboratory conditions. The experimental design has involved the following: (a) determination of analytes A and B in polycrystalline composites of organic materials 1-7, based on 2-piperidine (pyrrolidine or piperazine)-1-yl-ethyl ammonium salts in order to determine the effect of sample preparation techniques on method performance using commercial herbicide formulations and (b) analysis of non-(X j,k,l (i) ) and sterilized (Y j,k,l (i) ) soil samples (i-fold rate 1, 10, 100, or 1,000; j-pesticide type A or B; k-time (0, 5, 10, 20, and 50 days) and l = 1-3 replicated samples) having clay content ∈ 5.0-12.0 %, silt ∈ 23.0-51.1 %, sand ∈ 7.2-72.0 %, and pH ∈ 4.0-8.1. In order to obtain a high representativeness of the data toward real-field experiments, the pollution scheme has involved 1-, 10-, 100-, and 1,000-fold rates. The firstfold rate has concentration of pollutant A of 2.639 × 10(-4) g in 625 cm(2) soil horizon of 0-25 cm(2) (5 cm depth) according to registration report (PSM-Zulassungbericht) of German Federal Office of Consumer Protection and Food Safety (Bundesamt für Verbraucherschutz und Lebensmittelsicherheit) 6337/26.10.2009. The experimental design has involved quincunx systematic statistical approach for collection of soil samples. The performance has been compared with the corresponding statistical variable obtained, using an independent HPLC-ESI-(APCI-)-MS/MS analysis.

Uptake, translocation, accumulation, and metabolism of fluroxypyr-meptyl and oxidative stress induction in rice seedling.

Fluroxypyr-meptyl (FLUME) is heterocyclic herbicide with internal absorption and transmission characteristics. Owing to its low cost and rapid efficacy, it has been widely used to control broad-leaved weeds in wheat, corn, and rice fields. However, the uptake, translocation, accumulation, and metabolism of FLUME in rice seedlings and the extent of oxidative stress induced by it remain largely unknown, which consequently restricts the comprehensive risk assessment of FLUME residues in the environment during rice production. Hence, we systematically investigated the growth and physiological responses of rice to FLUME and analyzed its uptake, translocation, accumulation, and metabolism in rice seedlings. The results indicated that under 0-0.12 mg/L FLUME treatment, only a small proportion of FLUME was translocated upward and accumulated in rice shoots following absorption via roots, with all the translocation factor values being < 1. Moreover, the distribution and enrichment ability of FLUME in rice seedlings were greater in roots than in shoots. Furthermore, we revealed that FLUME accumulation in rice seedlings evidently inhibited their growth and activated the defense system against oxidative stress, with an increase in the activity of antioxidant and detoxifying enzymes. In addition, multiple metabolic reactions of FLUME were observed in rice seedlings, including dehalogenation, hydroxylation, glycosylation, acetylation, and malonylation. Our study provides systematic insights into the uptake, translocation, accumulation, and metabolism of FLUME in rice seedlings as well as the oxidative stress induced by FLUME accumulation, which can help improve FLUME applications and environmental risk assessments in crops.

Glycolate and 2-phosphoglycolate content of tissues measured by ion chromatography coupled to mass spectrometry.

Glycolate and 2-phosphoglycolate (PG) are 2-carbon monocarboxylic acids with ill-defined metabolic roles. Their concentrations have not yet been described in tissues apart from body fluids and erythrocytes. We describe the use of ion chromatography coupled with mass spectrometry (IC-MS) to quantify levels of glycolate and PG in tissue. Sample preparation and analysis can be performed within an hour. Low concentrations of glycolate (12-48 nmol/g) and PG (4-17 nmol/g) were detected in all tissues. The availability of this IC-MS assay will facilitate investigations of the origin, function, and metabolism of glycolate and PG in tissues.

Study of photorespiration in marine microalgae through the determination of glycolic acid using hydrophilic interaction liquid chromatography.

Determination of organic acids in intracellular extracts and in the cultivation media of marine microalgae aid investigations about metabolic routes related to assimilation of atmospheric carbon by these organisms, which are known by their role in the carbon dioxide sink. The separation of these acids was investigated by hydrophilic interaction liquid chromatography (HILIC) using isocratic elution with a mobile phase composed of 70:30 v/v acetonitrile/20 mmol/L ammonium acetate buffer (pH 6.8) and detection at 220 nm. HILIC allowed the determinations of glycolic acid, the most important metabolite for the evaluation of the photorespiration process in algae, to be made with better selectivity than that achieved by reversed phase liquid chromatography, but with less detectability. The concentration of glycolic acid was determined in the cultivation media and in intracellular extracts of the algae Tetraselmis gracilis and Phaeodactylum tricornutum submitted to different conditions of aeration: (i) without forced aeration, (ii) aeration with atmospheric air, and (iii) bubbling with N(2). The concentration of glycolic acid had a higher increase as the cultures were aerated with nitrogen, showing higher photorespiratory flux than that occurring in the cultures aerated with atmospheric air.

Simultaneous determination of plant growth regulators 1-naphthylacetic acid and 2-naphthoxyacetic acid in fruit and vegetable samples by room temperature phosphorescence.

INTRODUCTION: 1-Naphthylacetic and 2-naphthoxyacetic acids belong to the synthetic branch of auxins. Auxins have attracted considerable interest as a subject of study by virtue of their biological and physiological significance. Their broad use as plant growth regulators has raised the need for simple, rapid, sensitive and selective analytical methods for their determination in real samples. OBJECTIVE: The primary aim of this work was to develop an analytical method for the simultaneous determination of 1-naphthylacetic acid and 2-naphthoxyacetic acid in commercial technical formulations, tomato and various fruit types (apple, strawberry, orange and plum) by room temperature phosphorescence. METHODOLOGY: Filtrated solutions of aqueous slurries from ecological fruit and tomato samples are acidified and then extracted with dichloromethane. Once the solvent is evaporated, the dried residue is dissolved in sodium dodecyl sulphate (a micellar agent), and supplied with thallium (I) nitrate as an external heavy atom source and sodium sulphite as deoxygenation agent to enhance the ensuing phosphorescence. RESULTS: The broad-band overlapping spectra for the two analytes were resolved by first- and second-derivative phosphorescence spectrometry. Zero-crossing measurements at 488.5 nm in the first-derivative spectrum and 469.5 nm in the second derivative spectrum exhibited a linear dependence on the 2-naphthoxyacetic acid and 1-naphthylacetic acid concentration, respectively. The detection limits as determined in accordance with the error propagation theory were 11.5 ng/mL for 1-naphthylacetic acid and 15.6 ng/mL for 2-naphthoxyacetic acid. CONCLUSION: The proposed method affords the determination of 1-naphthylacetic acid and 2-naphthoxyacetic acid in real samples with near-quantitative recoveries from agricultural products.

Concurrent 2,4-D and triclopyr biomonitoring of backpack applicators, mixer/loader and field supervisor in forestry.

Two herbicides, 2,4-D and triclopyr esters (application ratio 1.6:1 acid equivalents) were applied as a tank mix by a crew of 8 backpack sprayer applicators, a mixer/loader, and a field supervisor. The crew was employed in a conifer release program in northern California during the summer of 2002. Biomonitoring (urine, 24 h) utilized 2,4-D and triclopyr (a.e.) as rapidly excreted exposure biomarkers. The absorbed dosages of 2,4-D and triclopyr were calculated based upon cotton whole body suits and biomonitoring. Dosages based upon accumulation of the herbicides on body suits averaged 42.6 µg (a.e.) 2,4-D/kg-d and 8.0 µg (a.e.) triclopyr/kg-d. Six consecutive days of concurrent urine collections showed that backpack applicators excreted an average of 11.0 µg (a.e.) 2,4-D/kg-d and 18.9 µg (a.e.) triclopyr/kg-d. Estimates based upon curve fitting were 17.1 and 29.3 µg (a.e.)/kg-d, respectively. Results suggest that passive dosimetry for 2,4-D consistently overestimated the dosage measured using biomonitoring by a factor of 2-3 fold, while for triclopyr, passive dosimetry underestimated the absorbed dose based on biomonitoring by a factor of 2-4 fold.

Dissipation and residues of fluroxypyr-meptyl in rice and environment.

A simple and reliable analytical method for analysis of fluroxypyr-meptyl residue in rice, soil and water was investigated. The residue levels and dissipation rates of fluroxypyr-meptyl (34% AS) were determined by GC-MSD in selected ion monitoring mode. In the supervised field trials, the half-life of fluroxypyr- meptyl in rice plant was in the range 1.25-4.13 days. The half-lives of fluroxypyr-meptyl in soil and water were 2.29 and 1.73 days, respectively. In order to assess the dissipation of fluroxypyr-meptyl in the environment, a laboratory simulated experiment was carried out in soil and water. The terminal residues of fluroxypyr-meptyl in rice plant, husked rice, rice hull and soil samples were undetectable at harvest. It showed that fluroxypyr-meptyl may be safe to use according to the recommended dosage suggested by the corporation.

A case of fatal intoxication by ingestion of an herbicide formulation containing fluroxypyr-meptyl and triclopyr.

Fluroxypyr-meptyl and triclopyr are synthetic auxin-like herbicides that are used to control woody and broadleaf weeds. Herein, we report a case of fatal intoxication involving fluroxypyr-meptyl and triclopyr. A 61-year-old man was found dead at his farm with several suicide notes, and a white plastic bottle and a plastic cup with traces of white emulsion were found next to him. The plastic bottle was labeled as an herbicide formulation containing fluroxypyr-meptyl and triclopyr. Forensic toxicological screening of the stomach contents revealed the presence of fluroxypyr-meptyl, fluroxypyr and triclopyr. However, no fluroxypyr-meptyl was detected in blood owing to its rapid hydrolysis to fluroxypyr. In this study, fluroxypyr and triclopyr in blood were extracted using solid-phase extraction, and analyzed by liquid chromatography-tandem mass spectrometry. The analytical method was validated in terms of linearity, precision, accuracy, recovery and matrix effect, and the acceptable criteria were satisfied. Toxicological analysis showed that fluroxypyr and triclopyr concentrations were 19.7 µg/mL and 137.4 µg/mL in peripheral blood and 16.5 µg/mL and 147.8 µg/mL in heart blood, respectively. Based on these toxicological results and autopsy findings, the cause of death was determined to be acute fatal intoxication by ingestion of the pesticide containing fluroxypyr-meptyl and triclopyr. This is the first report of the determination of fluroxypyr and triclopyr in a fatal intoxication case.

GHB related acids are useful in routine casework of suspected GHB intoxication cases.

GHB related acids (3,4-dihydroxy butyric acid, 2,4-dihydroxy butyric acid and glycolic acid) are produced through oxidative GHB metabolism. These analytes could be potential biomarkers to ensure the diagnosis of a GHB intoxication and even prolong the detection window. Within this study, forensic routine cases were measured to consider the potential of additional gas chromatographic mass spectrometric analysis on these acids. 17 GHB positive real cases (10 serum samples and 7 urine samples) and 40 cases with suspicion of drugging in DFC cases and negative GHB results (21 serum samples and 19 urine samples) were evaluated. Increased GHB related acid concentrations were detected in all serum and most urine samples positive on GHB. In some GHB negative cases, especially in serum samples, concentrations of GHB related acids gave hints that GHB actually was taken. We recommend to use the following cut-offs for a more reliable interpretation of potential GHB intoxication cases: 3,4-OH-BA:>3 mg/L in serum and>50 mg/L in urine; 2,4-OH-BA:>2 mg/L in serum and>25 mg/L in urine; GA:>5 mg/L in serum and>400 mg/L in urine.

GHB related acids (dihydroxy butyric acids, glycolic acid) can help in the interpretation of post mortem GHB results.

Post mortem gamma hydroxy butyric acid (GHB) concentrations should be interpreted with caution since GHB concentrations can increase after death. Post mortem concentrations after the intake of GHB ante mortem do overlap with concentration ranges in cases without known exposure to GHB and make an interpretation challenging. GHB is known to undergo intensive metabolism to related acids (glycolic acid (GA), succinic acid (SA), 2,4- and 3,4-dihydroxy butyric acid (2,4-OH-BA and 3,4-OH-BA)). GHB and these related acids were analyzed using a validated gas chromatographic mass spectrometric (GC-MS) method after liquid liquid extraction and trimethylsilylation. SA concentrations were not usable post mortem due to instability. Concentrations in cases without known exposure to GHB (urine: n = 80; femoral blood: n = 103) were: for GA 4.6-121 mg/L in urine and 1.6-11.2 mg/L in blood, for 2,4-OH-BA < LoD-25,3 mg/L in urine and < LoD-3.7 mg/L in blood and for 3,4-OH-BA < LoD-54,3 mg/L in urine and < LoD-5.3 mg/L in blood. In death cases involving GHB (n = 11) concentrations of GHB related acids were increased compared to these levels (for GA in 7/10 cases and up to 391 mg/L in urine, in 6/11 cases and up to 34 mg/L in blood; for 2,4-OH-BA in 9/10 cases and up to 144 mg/L in urine, in 11/11 cases and up to 9.1 mg/L in blood; for 3,4-OH-BA in 7/10 cases and up to 665 mg/L in urine, in 11/11 cases and up to 19 mg/L in blood). Therefore, the concentrations of these GHB related acids can aid in a more reliable differentiation of GHB exposure in post mortem toxicology. We recommend to add the analysis of 2,4-OH-BA, 3,4-OH-BA and GA in femoral blood for the diagnosis of a GHB intake post mortem. Post mortem femoral blood concentrations > 4 mg/L for 2,4-OH-BA, > 5 mg/L for 3,4-OH-BA and > 12 mg/L for GA give hints for a GHB intake.

A fatal case involving extremely high levels of ethylene glycol without elevation of its metabolites or crystalluria.

A unique case of an intentional overdose of ethylene glycol resulting in a fatality is described. The decedent had a very high concentration of ethylene glycol without elevated concentrations of its metabolites or crystalluria. The ethylene glycol concentrations in blood, urine, and vitreous fluid were 2340, 2261, and 1028 mg/dL, respectively. Osmolality of blood and vitreous fluid was also very high at 1426 and 534 mOsm/kg, respectively. No crystals were found in the urine. Furthermore, on the urine organic acids profile the ethylene glycol metabolites oxalic, glycolic, and glyoxylic acids were within the reference ranges. In addition to ethylene glycol, the decedent had an elevated level of mirtazapine, an antidepressant, and a low level of bupropion. It was estimated that the subject consumed 1034 g of ethylene glycol. To our knowledge, this is the first case of death from severe ethylene glycol poisoning in the absence of ethylene glycol metabolites or crystalluria.

Analysis of diglycolic acid in food packaging, over the counter products, direct additive carboxymethyl cellulose, and retail foods.

Carboxymethyl cellulose (i.e. CMC or cellulose gum) is used as a direct additive for foods and drugs to change texture and act as a binder. CMC can also be a fluid absorbent used in food packaging and food contact materials. CMC and other carboxymethyl starches are synthesised by condensing glycolic acid with monochloroacetic acid. Diglycolic acid (DGA) is a byproduct produced by this condensation which cannot be completely removed. Currently, there are no analytical methods to accurately detect and quantify DGA in foods and food packaging materials. A method using a methanol/water extraction coupled with weak anion exchange solid phase extraction cleanup for more complex matrices was developed. A novel LC-MS/MS method was used to determine the DGA concentration in food contact materials, food grade direct additive CMC, and foods containing CMC. This paper will discuss the development of a new method for the preparation and cleanup of various food matrices and LC-MS/MS analysis for the presence of DGA.

N-doped carbon nanotubes-reinforced hollow fiber solid-phase microextraction coupled with high performance liquid chromatography for the determination of phytohormones in tomatoes.

A N-doped carbon nanotubes-reinforced hollow fiber solid-phase microextraction (N-doped CNTs-HF-SPME) method was developed for determination of two naphthalene-derived phytohormones, 1-naphthalene acetic acid (NAA) and 2-naphthoxyacetic acid (2-NOA), at trace levels in tomatoes. N-doped CNTs were dispersed in ultrapure water with the assistance of surfactant, and then immobilized into the pores of hollow fiber by capillary forces and sonification. The resultant N-doped CNTs-HF was wetted with 1-octanol, subsequently immersed into the tomato samples to extract the target analytes under a magnetic stirring, and then desorbed with methanol by sonication prior to chromatographic analysis. Compared with CNTs, the surface hydrophilicity of N-doped CNTs was improved owing to the doping of nitrogen atoms, and a uniform dispersion was formed, thus greatly simplifying the preparation process and reducing waste of materials. In addition, N-doped CNTs-HF exhibits a more effective extraction performance for NAA and 2-NOA on account of the introduction of Lewis-basic nitrogen. It is worth to mention that owing to the clean-up function of HF, there are not any complicated sample pretreatment procedures prior to the microextraction. To achieve the highest extraction efficiency, important microextraction parameters including the length and the concentration level of N-doped CNTs in surfactant solution, extraction time, desorption conditions such as the type and volume of solvents, pH value, stirring rate and volume of the donor phase were thoroughly investigated and optimized. Under the optimal conditions, the method showed 165- and 123-fold enrichment factors of NAA and 2-NOA, good inter-fiber repeatability and batch-to-batch reproducibility, good linearity with correlation coefficients higher than 0.9990, low limits of detection and quantification (at ng g-1 levels), and satisfactory recoveries in the range of 83.10-108.32% at three spiked levels. The proposed method taking advantages of both excellent adsorption performance of N-doped CNTs and the clean-up function of HF, was a simple, green, efficient and cost-effective enrichment procedure for the determination of trace NAA and 2-NOA in tomatoes.

HelixComplex snail mucus exhibits pro-survival, proliferative and pro-migration effects on mammalian fibroblasts.

Snail mucus is a mixture of active substances commonly thought to have healthy properties for the treatment of skin disorders. Although snail mucus is an ingredient of several cosmetic and para-pharmaceutic products, a comprehensive characterization of chemical composition and biological effects is still missing. Crude purified extracts from Helix aspersa muller mucus (HelixComplex) were prepared and, after chemical characterization, tested on in vitro experimental models. Differently from what expected, HelixComplex was characterized by the presence of small amounts of glycolic acid and allantoin. By using different in vitro assays on fibroblast cultures, we found that HelixComplex lacked of cytotoxicity, protected cells from apoptosis (p < 0.05) and, importantly, was able to significantly induce cell proliferation and migration through direct and indirect mechanisms. These effects were associated to morphological changes, cytoskeleton re-organization and release of cytokines. In conclusion, our findings suggest that snail mucus biological effects are attributable to cell proliferation and migration, and pave the way for further investigating snail mucus potential as therapeutic agent.