Nutritional composition, lipid profile and stability, antioxidant activities and sensory evaluation of pasta enriched by linseed flour and linseed oil.

Pasta assortments fortified with high quality foods are a modern nutritional trends. This study, explored the effects of fortification with linseed flour (LF) and linseed oil (LO) on durum wheat pasta characteristics. Wheat flour semolina was replaced with 5%, 10% and 15% of LF or 1%, 2.5% and 5% of LO. Control pasta CP (without LF or LO addition), LF-enriched pasta LFP 5%, LFP 10% and LFP 15% and LO-enriched pasta LOP 1%, LOP 2.5% and LOP 5% was compared for the proteins, fat and phenolic contents and fatty acids (FA) profile. Impact on lipid oxidation and sensory evaluation were also determined. Fortification of pasta with LF improved significantly (p < 0.05) the contents of protein, fat and phenolic compared to CP whereas the enrichment of pasta with LO resulted in a significant increase (p < 0.05) in the content of fat and a significant decrease in protein and phenolic contents. All the formulations decreased the saturated FA percent and increased the polyunsaturated FA percent with enhancement of omega-3 FA content. Antioxidant activity measured by FRAP and DPPH assays was improved after the fortification. For lipid oxidation, the replacement of semolina by LF or LO promoted an increase (p < 0.05) on TBARS values in level-dependent manner. Regarding sensory evaluation, the two types of fortification did not affect the taste; flavor and aroma of cooked pasta, but LOP 5% showed the highest score of the overall acceptability. The results recommended the possibility of producing pasta supplemented with LF or LO (even at a level of 15% and 5% respectively) as a functional food.

Development of a corn flour certified reference material for the accurate determination of zearalenone.

A certified reference material (CRM, KRISS 108-01-002) for zearalenone in corn flour was developed to assure reliable and accurate measurements in testing laboratories. Commercially available corn flour underwent freeze-drying, pulverization, sieving, and homogenization. The final product was packed in amber bottles, approximately 14 g per unit, and preserved at -70 °C. 13C18-Zearalenone was used as an internal standard (IS) for the certification of zearalenone by isotope-dilution liquid chromatography-tandem mass spectrometry (ID-LC‒MS/MS) and for the analysis of α-zearalenol, ß-zearalenol, and zearalanone by LC‒MS/MS. The prepared CRM was sufficiently homogeneous, as the among-unit relative standard deviation for each mycotoxin ranged from 2.2 to 5.7 %. Additionally, the stability of the mycotoxins in the CRM was evaluated under different temperature conditions and scheduled test periods, including storage at -70°C, -20°C, and 4°C and room temperature for up to 12 months, 6 months, and 1 month, respectively. The content of each target mycotoxin in the CRM remained stable throughout the monitoring period at each temperature. Zearalenone content (153.6 ± 8.0 µg/kg) was assigned as the certified value. Meanwhile, the contents of α-zearalenol (1.30 ± 0.17 µg/kg), ß-zearalenol (4.75 ± 0.33 µg/kg), and zearalanone (2.09 ± 0.16 µg/kg) were provided as informative values.

Development and validation of high-throughput and low-cost STARP assays for genes underpinning economically important traits in wheat.

KEY MESSAGE: We developed and validated 56 gene-specific semi-thermal asymmetric reverse PCR (STARP) markers for 46 genes of important wheat quality, biotic and abiotic stress resistance, grain yield, and adaptation-related traits for marker-assisted selection in wheat breeding. Development of high-throughput, low-cost, gene-specific molecular markers is important for marker-assisted selection in wheat breeding. In this study, we developed 56 gene-specific semi-thermal asymmetric reverse PCR (STARP) markers for wheat quality, tolerance to biotic and abiotic stresses, grain yield, and adaptation-related traits. The STARP assays were validated by (1) comparison of the assays with corresponding diagnostic STS/CAPS markers on 40 diverse wheat cultivars and (2) characterization of allelic effects based on the phenotypic and genotypic data of three segregating populations and 305 diverse wheat accessions from China and 13 other countries. The STARP assays showed the advantages of high-throughput, accuracy, flexibility, simple assay design, low operational costs, and platform compatibility. The state-of-the-art assays of this study provide a robust and reliable molecular marker toolkit for wheat breeding programs.

Understanding whole-wheat flour and its effect in breads: A review.

Although the consumption of whole grains, including bread made with whole-wheat flour, is promoted for health benefits and reduced risk for disease and mortality, consumer acceptance, and consumption of some whole-wheat products is low compared to that of white breads. This review focuses on the understanding of whole-wheat flours, both their positive and negative aspects, and how to improve those flours for the production of whole-wheat breads. The review addresses genetic aspects, various milling systems, and pretreatment of bran and germ. The baking process and use of additives and enzymes may also improve product quality to help consumers meet dietary recommendations for daily whole-wheat consumption.

High molecular weight glutenin subunits and the classification used in Brazilian wheat industry.

Industrial wheat quality flour is related to gluten amount in grain. This study aimed to evaluate the relationship between high molecular weight (HMW) glutenins obtained by SDS-PAGE and gluten strength (W) obtained by the alveograph test and cropping environmental effect on wheat flour quality for Brazilian industry. Fifty-one cultivars/breeding lines were evaluated in three environments. The W value and HMW glutenin score were evaluated by SDS-PAGE. The environment effects on wheat flour were also evaluated. There was a relationship between the W value used in wheat flour industrial classification and score 10 of HMW glutenins, but there was no relation with scores 9 or lower. Cultivars/breeding lines with score 10 of HMW glutenin are less susceptible to environmental effects and produce breeding type wheat flour (W value ≥300) of interest for industry. The cultivars/breeding lines with score 10 for HMW glutenins is the main choice for a wheat breeding program.

Physical and Bioactive Properties of Muffins Enriched with Raspberry and Cranberry Pomace Powder: A Promising Application of Fruit By-Products Rich in Biocompounds.

The objective of this study was to determine the effects on quality of incorporating raspberry and cranberry pomaces into American-style muffins prepared under various baking conditions. The different baking conditions did not affect the texture or microstructure of the control muffins. The enhanced samples baked at 140 °C for 30 min were characterized by a harder texture than the control muffins and by a distributed protein matrix and distorted starch granules, while those baked at 240 °C for 15 min had a moist texture and showed incomplete starch gelatinization. The mean percent recovery of ellagic acid, flavonols, tocopherols, tocotrienols, and anthocyanins after baking were 156, 53, 48, 43, and 22 %, respectively. Lower baking temperature was better for ellagic acid and tocotrienols, but worse for flavonols, tocopherols, and anthocyanins. It seems that, for the enhanced samples, the intermediate baking conditions (180 °C for 20 min) guarantee the best microstructure and texture and the appropriate retention of phytochemicals in muffins.

Stripe rust resistance and dough quality of new wheat - Dasypyrum villosum translocation lines T1DL•1V#3S and T1DS•1V#3L and the location of HMW-GS genes.

The transfer of agronomically useful genes from wild wheat species into cultivated wheat is one of the most effective approaches to improvement of wheat varieties. To evaluate the transfer of genes from Dasypyrum villosum into Triticum aestivum, wheat quality and disease resistance was evaluated in two new translocation lines, T1DL•1V#3S and T1DS•1V#3L. We examined the levels of stripe rust resistance and dough quality in the two lines, and identified and located the stripe rust resistant genes and high molecular weight glutenin subunit (HMW-GS) genes Glu-V1 of D. villosum. Compared to the Chinese Spring (CS) variety, T1DL•1V#3S plants showed moderate resistance to moderate susceptibility to the stripe rust races CYR33 and Su11-4. However, T1DS•1V#3L plants showed high resistance or immunity to these stripe rusts. The genes for resistance to stripe rust were located on 1VL of D. villosum. In comparison to CS, the dough from T1DS•1V#3L had a significantly shorter developing time (1.45 min) and stable time (1.0 min), a higher weakness in gluten strength (208.5 FU), and a lower farinograph quality index (18). T1DL•1V#3S had a significantly longer developing time (4.2 min) and stable time (5.25 min), a lower weakness in gluten strength (53 FU) and a higher farinograph quality index (78.5). We also found that T1DS•1V#3L had reduced gluten strength and dough quality compared to CS, but T1DL•1V#3S had increased gluten strength and dough quality. The results of SDS-PAGE analysis indicated that Glu-V1 of D. villosum was located on short arm 1VS and long arm 1VL. These results prove that the new translocation lines, T1DS•1V#3L and T1DS•1V#3L, have valuable stripe rust resistance and dough quality traits that will be important for improving wheat quality and resistance in future wheat breeding programs.

Changes in the rheological properties of wheat dough during short-term storage of wheat.

BACKGROUND: The aim of the present study was to investigate the ability of the small- and large-deformation fundamental rheological tests to monitor the changes during short-term post-harvest storage of wheat. RESULTS: At the end of wheat storage period, wet gluten quantity decreased, while gluten index increased in comparison to those of freshly harvested samples. The rheological properties of dough changed over the pre-defined period of storage in terms of becoming more elastic and less extensible in comparison to that of freshly harvested wheat. Visco-elastic properties of weaker flour samples changed more markedly during storage than those of stronger flours, indicating that the intensity of dough rheological changes during wheat storage might be dependent on gluten quality and were the characteristic of wheat variety. CONCLUSION: It was shown that small deformation dynamic oscillation and large deformation creep-recovery tests can be successfully employed to monitor the changes in flour quality during wheat storage and that required storage period after wheat harvesting has to be defined according to wheat variety initial rheological properties and its gluten quality.

Effect of durum wheat cultivars on physico-chemical and sensory properties of spaghetti.

BACKGROUND: Mixtures of different cultivars provide semolina with proper processing properties but not always good nutritional properties. In this study, the effects of mono-varietal cultivars of durum wheat on pasta quality were evaluated in order to find a good balance between nutritional and sensory properties of the final product. RESULTS: Durum wheat spaghetti was manufactured using semolina from six mono-varietal cultivars. A commercially available semolina mixture was also used to produce a control pasta sample. Instrumental (i.e. rheological and texture analysis), sensory (i.e. elasticity, firmness, adhesiveness) and nutritional (i.e. protein, ash and fibre content, glycaemic index) analyses were carried out. Results highlighted differences between selected cultivars. In particular, spaghetti obtained with Anco Marzio and Cappelli semolina (modern and old cultivars, respectively) showed the highest protein content and the lowest cooking loss, compared with the other samples. CONCLUSION: Spaghetti made with Cappelli semolina showed the lowest adhesiveness and the highest hardness; it recorded the best overall quality and presented the lowest glycaemic response. Hence, durum wheat pasta with a good balance between nutritional and cooking quality could be obtained from semolina based on mono-varietal cultivars. © 2013 Society of Chemical Industry.

Characterization of the liposoluble fraction of common wheat (Triticum aestivum) and spelt (T. aestivum ssp. spelta) flours using multivariate analysis.

BACKGROUND: In the present paper, a special method for derivatization of liposoluble extract of common wheat and spelt flours was employed which enables simultaneous detection of fatty acid and non-saponifiable lipid fractions. RESULTS: Gas chromatographic-mass spectrometric analytical data for both fractions were separately analyzed by multivariate statistical techniques to model classes of different common wheat and spelt cultivars. Cluster analysis was used, and the results obtained revealed that better discrimination of samples was achieved by analyzing the peak area after 16 min retention time (non-saponifiable lipids), rather than commonly used peak area between 12 and 16 min (fatty acid fraction), due to more distinctive positions of points in factor space, even though the distances between points for fatty acid fraction (12-16 min) were greater. Similar results were obtained by principal components analysis, where all wheat points almost coincided whereas spelt showed good discrimination. CONCLUSION: Comparison of chromatogram areas for non-saponifiable lipid fraction between common and spelt wheat showed a statistically high difference and hence has a potential for use in authenticity control.

Metabolite profiling on wheat grain to enable a distinction of samples from organic and conventional farming systems.

BACKGROUND: Identification of biomarkers capable of distinguishing organic and conventional products would be highly welcome to improve the strength of food quality assurance. Metabolite profiling was used for biomarker search in organic and conventional wheat grain (Triticum aestivum L.) of 11 different old and new bread wheat cultivars grown in the DOK system comparison trial. Metabolites were extracted using methanol and analysed by gas chromatography-mass spectrometry. RESULTS: Altogether 48 metabolites and 245 non-identified metabolites (TAGs) were detected in the cultivar Runal. Principal component analysis showed a sample clustering according to farming systems and significant differences in peak areas between the farming systems for 10 Runal metabolites. Results obtained from all 11 cultivars indicated a greater influence of the cultivar than the farming system on metabolite concentrations. Nevertheless, a t-test on data of all cultivars still detected 5 metabolites and 11 TAGs with significant differences between the farming systems. CONCLUSION: Based on individual cultivars, metabolite profiling showed promising results for the categorization of organic and conventional wheat. Further investigations are necessary with wheat from more growing seasons and locations before definite conclusions can be drawn concerning the feasibility to evolve a combined set of biomarkers for organically grown wheat using metabolite profiles.

Quality and nutritional properties of pasta products enriched with immature wheat grain.

In this study, nutritional and sensory properties of pasta enriched with 30% immature wheat grain (IWG), a natural source of fructo-oligosaccharides (FOS), are evaluated. Colour and cooking quality, nutritional value and glycaemic index (GI) of pasta were assessed in comparison with commercially enriched inulin and 100% wholewheat pastas. IWG integration induced deep changes in colour, without negatively affecting the cooking quality of pasta, and promoted nutritional quality by increasing the fibre content; IWG pasta presented a remarkable leaching of FOS in cooking water, thus providing only 1 g of FOS per serving. IWG pastas showed a GI of 67 (dried) and 79 (fresh), not significantly different from commercial pasta products. IWG can be considered an interesting ingredient to obtain functional products 'naturally enriched' in FOS and fibre. Results about FOS leaching suggest that, in dealing with functional effects, the actual prebiotic content should be carefully considered on food 'as eaten'.

Variability and relationship among Mixolab and Falling Number evaluation based on influence of fungal α-amylase addition.

BACKGROUND: In bread-making technology, α-amylase activity is routinely measured with a Falling Number device to predict wheat flour quality. The aim of this study was to determine the possibility of using Mixolab parameters to assess the Falling Number (FN) index. The effects of different doses of fungal α-amylase addition on the Mixolab characteristics and FN index values were investigated. RESULTS: Principal component analysis was performed in order to illustrate the relationships between the Mixolab parameters and the FN index. To highlight the linear combination between the FN index values and the Mixolab parameters used to evaluate starch pasting properties (C3, C4, C5 and point differences C34 and C54), a multivariate prediction model was developed. Greatest precision (R = 0.728) was obtained for the linear regression FN = f(C4, C54) model. This model was tested on a different sample set than the one on which it was built. A high correlation was obtained between predictive model and measured FN index values (r = 0.896, P = 0.01). CONCLUSION: The model provides a framework to predict the evolution of the FN index, which is predicted by the torque for cooking stability (C4) and the difference between points C5 and C4 (C54). The obtained results suggested that the Mixolab device could be a reliable instrument for evaluation of the FN index values.

Comparative proteome analysis of glutenin synthesis and accumulation in developing grains between superior and poor quality bread wheat cultivars.

BACKGROUND: Wheat glutenins are the major determinants of wheat quality. In this study, grains at the development stage from three wheat cultivars (Jimai 20, Jin 411 and Zhoumai 16) with different bread-making quality were harvested based on thermal times from 150 °C(d) to 750 °C(d) , and were used to investigate glutenin accumulation patterns and their relationships with wheat quality. RESULTS: High and low molecular weight glutenin subunits (HMW-GSs and LMW-GSs) were synthesised concurrently. No obvious correlations between HMW/LMW glutenin ratios and dough property were observed. Accumulation levels of HMW-GSs and LMW-GSs as well as 1Bx13 + 1By16 and 1Dx4 + 1Dy12 subunits were higher in superior gluten quality cultivar Jimain 20 than in poor quality cultivar Jing 411 and Zhoumai 16. According to the results of two-dimensional gel electrophoresis, six types of accumulation patterns in LMW-GSs were identified and classified. The possible relationships between individual LMW-GSs and gluten quality were established. CONCLUSION: The high accumulation level of HMW-GSs and LMW-GSs as well as 1Bx13 + 1By16 and 1Dx4 + 1Dy12 subunits contributed to the superior gluten quality of Jimai 20. Two highly expressed and 16 specifically expressed LMW glutenin subunits in Jimain 20 had positive effects on dough quality, while 17 specifically expressed subunits in Zhoumai 16 and Jing 411 appeared to have negative effects on gluten quality.

Nutritional and sensory quality evaluation of sponge cake prepared by incorporation of high dietary fiber containing mango (Mangifera indica var. Chokanan) pulp and peel flours.

Sponge cake prepared by partial substitution of wheat flour with mango pulp and mango peel flours (MPuF and MPeF, respectively) at different concentrations (control, 5%, 10%, 20% or 30%) were investigated for the physico-chemical, nutritional and organoleptic characteristics. Results showed sponge cake incorporated with MPuF and MPeF to have high dietary fiber with low fat, calorie, hydrolysis and predicted glycemic index compared with the control. Increasing the levels of MPuF and MPeF in sponge cake had significant impact on the volume, firmness and color. Sensory evaluation showed sponge cake formulated with 10% MPuF and 10% MPeF to be the most acceptable. MPeF and MPuF have high potential as fiber-rich ingredients and can be utilized in the preparation of cake and other bakery products to improve the nutritional qualities.

Compositional, thermal and water sorption properties of wheat flour: comparing wild-relatives v/s elite wheat varieties used in current plant breeding.

Plant breeders are focused on creating new varieties of wheat with enhanced yield potential without affecting the quality of wheat for food. In this study, four cultivated varieties of wheat, Triticium asetivum and two wild relatives of wheat; Triticum timopheevii and Triticum urartu were studied. The impact of starch and protein content on structural, thermal and water sorption properties of four main wheat cultivars in comparison to the wild relatives has been studied. Wild relatives of wheat required higher temperatures to initiate starch gelatinisation and amylose/lipid complex formation as compared to the four main wheat cultivars. The carbohydrate region in FTIR indicates structural differences (ordered and unordered starch) in the different varieties of wheat flour. The differentiation between wild relatives and main varieties is at the species level. Both wild relatives showed a noticeable difference in moisture sorption behaviour as compared with the 4 main cultivars, especially in terms of monolayer (M0) and the strength of water binding to the primary sites (C) values.

Rheological characteristics of wheat-chickpea composite flour doughs and effect of Amla powder (Phyllanthus emblica L.) addition on the functional properties of bread.

Bread is a staple food for majority of the people worldwide, but it has a high glycemic effect. Substituting wheat flour partly with chickpea flour and the presence of bran is suggested to improve the glycemic effect of bread; however, the non-gluten substances in wheat flour adversely affect dough rheology. The addition of amla powder was tested on the rheological properties of wheat-chickpea flour composite doughs; also, the physical and sensory qualities of bread made thereof. The results showed that when the level of replacement of refined white flour (WF) or whole wheat flour (WWF) with chickpea flour was increased from 0 to 40%, it significantly affected the rheological properties and functionality of dough. A decreased farinograph water absorption, higher mixing tolerance index (i.e., weakening of dough), decreased resistance to extension, and lower ratio numbers were obtained with some differences between WF and WWF at the higher level of chickpea flour substitution. The addition of amla powder to WF: chickpea flour (60:40) blends reduced the angle of ascending (from 7.0 ± 0.7 to 6.0 ± 0.7) and angel of descending (from 3.2 ± 0.21 to 2.4 ± 0.2), indicating the slight tightening of gluten leading to dough breakdown. The addition of amla powder improved the mixing characteristics of the composite flour doughs, as well as the physical and sensory qualities of the bread. In conclusion, amla powder can help overcome the deleterious impact of adding chickpea flour to WF or WWF for producing good quality pan bread for people with type-2 diabetes.

Effects of dry heat treatment temperature on the structure of wheat flour and starch in vitro digestibility of bread.

The effects of the dry heat treatment (DHT) temperature (20, 50, 100, 150, 200 °C) on the structure of wheat flour and on the texture and in vitro starch digestibility of breads were investigated. X-ray diffraction and FTIR showed that increasing temperatures produced reduction of the hydrated starch structures, increased crystallinity and molecular order of starch chains, and had important effects on the gluten secondary structure. High treatment temperatures produced significant reductions in rapidly digestible starch (RDS) (53.21% at 20 °C, 22.24% at 200 °C), and the slowly digestible starch fraction tended to increase (26.12% at 20 °C, 31.48% at 200 °C). On the other hand, bread hardness showed a significant increase from 11.25 N at 20 °C to 49.53 N at 200 °C, the latter value being similar to that reported for bread crusts. Principal component analysis results showed that the flour and bread characteristics were drastically changed by the DHT, with 100 °C representing a critical temperature. Below 100 °C, breads showed textural characteristics close to that of the control bread, with reduced RDS fractions, while at temperatures above 100 °C, hardness was boosted.

Oxysterols in stored powders as potential health hazards.

Cholesterol oxidation products (COPs) have greater biological activity than cholesterol itself. Oxysterols reduce the nutritional value of foods and exhibit a wide range of biological activity, including pro-oxidant, carcinogenic, and cytotoxic properties. The most commonly detected oxysterols in foods are 7α-HC, 7ß-HC, a product of their dehydrogenation 7-KC and α-CE, ß-CE. The main dietary sources of oxysterols are eggs and egg-derived products, thermally processed milk and milk-based products, fried meat. This study aimed to measure the amount of cholesterol oxidation products in milk powder, egg powder and milk-egg powder during 24 months of storage. The changes in the selected oxysterols (determined by gas chromatography) were recorded. In milk powder, after the production process, the amount of cholesterol was 0.2 g 100 g-1 fat and in egg powder it was 3.4 g 100 g-1. After 6 months of storage, the dominant oxysterol in milk and egg powder was 7α-HC and in milk-egg powder it was 7-KC. After the storage period, oxysterols in powdered milk reached 1.81% of total cholesterol.  The most stable cholesterol was in the milk-egg mixture and its oxidation was the slowest. This study showed the presence of COPs in milk powder, egg powder and milk-egg powder and the effect of storage on cholesterol oxidation.

Physicochemical and Morphological Characteristics of Starch and Flour Obtained from Green Banana cv. Raja (Musa paradisiaca cv. Raja) in West Sumatra, Indonesia.

<b>Background and Objective:</b> Banana cv. <i>Raja</i> is widely cultivated in West Sumatra, Indonesia. The physicochemical properties of starch and flour were investigated to determine their functional food prospects in industrial food. <b>Materials and Methods:</b> Starch and flour of banana cv. <i>Raja</i> was characterized using proximate analysis, Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Fourier-Transform Infrared (FT-IR), X-Ray Fluorescence (XRF) and Rapid Visco-Analyzer (RVA). <b>Results:</b> Banana cv. <i>Raja</i> starch contains 40.73% starch, 17.49% amylose, 55.5% water, 0.66% ash, 0.83% protein and 0.18% fat. The size of the granules is ranging from 20-30 µm in irregular and ellipsoidal-truncated shapes. The structure of crystallinity belongs to the type B while the gelatinization temperature is 74.9°C. Furthermore, the starch composed of 41.06% potassium, 12.85% phosphorus, 12.74% iron, 9.4% calcium and 7.5% magnesium. <b>Conclusion:</b> The morphological and physicochemical starch characteristics of Banana cv. <i>Raja</i> and has similar characteristics with its flour. Meanwhile the swelling power and the solubility value of the flour were higher than the starch. The gelatinization temperatures of starch and flour were 74.9 and 73.4°C, respectively.