Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study.

The present in vivo study determined the microbiological counts of the gingival crevicular fluid (GCF) among patients with fixed dental prostheses fabricated using three different techniques. A total of 129 subjects were divided into three study groups: first, cobalt-chrome-based, metal-ceramic prostheses fabricated by the conventional method (MC, n = 35); the second group consisted of cobalt-chrome-based, metal-ceramic prostheses fabricated by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (CC-MC, n = 35); the third group comprised zirconia-based ceramic prostheses fabricated using the CAD/CAM technique (CC-Zr, n = 35). The control consisted of 24 patients using prostheses fabricated with either MC, CC-MC, or CC-Zr. The GCF was obtained from the subjects before treatment, and 6 and 12 months after the prosthetic treatment. Bacteriological and bacterioscopic analysis of the GCF was performed to analyze the patients' GCF. The data were analyzed using SPSS V20 (IBM Company, Chicago, IL, USA). The number of microorganisms of the gingival crevicular fluid in all groups at 12 months of prosthetic treatment reduced dramatically compared with the data obtained before prosthetic treatment. Inflammatory processes in the periodontium occurred slowly in the case of zirconium oxide-based ceramic constructions due to their biocompatibility with the mucous membranes and tissues of the oral cavity as well as a reduced risk of dental biofilm formation. This should be considered by dentists and prosthodontists when choosing restoration materials for subjects with periodontal pathology.

Silver Nanoparticles Addition in Poly(Methyl Methacrylate) Dental Matrix: Topographic and Antimycotic Studies.

The widespread use of nanoparticles (NPs) in medical devices has opened a new scenario in the treatment and prevention of many diseases and infections owing to unique physico-chemical properties of NPs. In this way, silver nanoparticles (AgNPs) are known to have a strong antimicrobial activity, even at low concentrations, due to their ability to selectively destroy cellular membranes. In particular, in the field of dental medicine, the use of AgNPs in different kinds of dental prosthesis matrixes could be a fundamental tool in immunodepressed patients that suffer of different oral infections. Candida albicans (C. albicans), an opportunistic pathogenic yeast with high colonization ability, is one of the causative agents of oral cavity infection. In our work, we added monodispersed citrate-capping AgNPs with a size of 20 nm at two concentrations (3 wt% and 3.5 wt%) in poly(methyl methacrylate) (PMMA), the common resin used to develop dental prostheses. After AgNPs characterization, we evaluated the topographical modification of PMMA and PMMA with the addition of AgNPs by means of atomic force microscopy (AFM), showing the reduction of surface roughness. The C. albicans colonization on PMMA surfaces was assessed by the Miles and Misra technique as well as by scanning electron microscopy (SEM) at 24 h and 48 h with encouraging results on the reduction of yeast viability after AgNPs exposure.

Denture stomatitis associated with small-colony variants of Staphylococcus aureus: a case report.

BACKGROUND: The small-colony variants (SCVs) of Staphylococcus aureus were isolated from persistent and recurrent infections, especially after placement of medical devices having direct contact with human tissues. The emergence of SCVs is a survival strategy of S. aureus which enables them to hide inside host's cells and induces a less severe immune response than to wild-type S. aureus. However, contrary to other medical devices, dental prosthesis as a surface potentially colonized by SCVs of S. aureus has not been examined thus far. We reported the first case of SCVs - S. aureus infection in denture wearer. CASE PRESENTATION: A 62-year-old woman with a complete removable acrylic denture presented extensive elevated erythematous lesions on the palate, compatible with denture stomatitis. The patient had a history of arterial hypertension, cigarette smoking and wearing denture at night. The fungal colonies, identified as Candida albicans, were cultured on Sabouraud agar. From three swabs (from hard palate mucosa, denture surface and angular cheilitis lesions) were cultured of pinpoint, clear, non-pigmented, and non-haemolytic colonies on Columbia agar. The small colonies turned out to be Gram-positive cocci, catalase-, Pastorex Staph Plus -, and clumping factor-positive, and oxidase-negative. Suspected phenotypically SCVs forms were definitively identified as S. aureus based on PCR amplification of species specific nuc and coa genes. Methicillin-resistance was verified by mecA gene detection. The isolates turned out to be susceptible to methicillin (MSSA) and resistant to gentamicin. The isolate was identified as menadione-auxotrophic variant. CONCLUSIONS: This case demonstrated that oral cavity in denture wearers may be a reservoir of small-colony variants of S. aureus, besides C. albicans. The prevalence of these bacteria and their role in the pathogenesis of oral diseases are not understood. Due to problems with their detection and identification, the true prevalence of oral SCVs may be underestimated.

Influence of Dental Prosthesis and Restorative Materials Interface on Oral Biofilms.

Oral biofilms attach onto both teeth surfaces and dental material surfaces in oral cavities. In the meantime, oral biofilms are not only the pathogenesis of dental caries and periodontitis, but also secondary caries and peri-implantitis, which would lead to the failure of clinical treatments. The material surfaces exposed to oral conditions can influence pellicle coating, initial bacterial adhesion, and biofilm formation, due to their specific physical and chemical characteristics. To define the effect of physical and chemical characteristics of dental prosthesis and restorative material on oral biofilms, we discuss resin-based composites, glass ionomer cements, amalgams, dental alloys, ceramic, and dental implant material surface properties. In conclusion, each particular chemical composition (organic matrix, inorganic filler, fluoride, and various metallic ions) can enhance or inhibit biofilm formation. Irregular topography and rough surfaces provide favorable interface for bacterial colonization, protecting bacteria against shear forces during their initial reversible binding and biofilm formation. Moreover, the surface free energy, hydrophobicity, and surface-coating techniques, also have a significant influence on oral biofilms. However, controversies still exist in the current research for the different methods and models applied. In addition, more in situ studies are needed to clarify the role and mechanism of each surface parameter on oral biofilm development.

Effect of Type II Diabetes Mellitus, Candida Albicans and Streptococcus Mutans on the Biofilm Formation on Prosthetic Materials.

AIM: To investigate the biofilm formation on Prosthetic materials as affected by type II diabetes mellitus, Candida albicans and Streptococcus mutans. MATERIALS AND METHODS: Two types of saliva, natural saliva, and artificial saliva were collected and prepared respectively. The natural saliva was divided into diabetic and non-diabetic saliva. The artificial saliva was further divided into two groups, one inoculated with Streptococcus mutans and the second with Candida albicans. The 150 samples of various prosthetic materials were prepared using nickel-chromium alloy, ceramic, soft liner, tooth molding powder; heat cured the acrylic resin. The samples were then immersed in natural saliva and artificial saliva and studied for biofilm formation. RESULTS: Diabetic saliva formed more biofilm than non-diabetic saliva. Streptococcus mutans were able to form more biofilm than Candida albicans in artificial saliva on constitutive androstane receptor (hCAR) and spinal length (SL). In Diabetic saliva, there was a significant difference in the biofilm formation seen between MC and NCA (p < 0.05). No biofilm was formed on hCAR in natural saliva (diabetic or non-diabetic). In artificial saliva inoculated with Candida albicans and streptococcus mutans there is a significant difference in the biofilm formation in all the materials except NCA. CONCLUSION: Diabetic saliva has more potential to form biofilm than non-diabetic saliva. Also, Candida albicans and Streptococcus mutans both can form a biofilm on materials used with the maximum formation on hCAR. Smoother materials formed less biofilm than rougher surfaces like hCAR, PCM, SL. CLINICAL SIGNIFICANCE: It is desirable for dental restorative materials to have a low susceptibility for accumulation and formation of biofilm as it may lead to pathologies such as dental caries, periodontal disease, peri-implantitis, etc. which are plaque-related. The most commonly used materials in prosthodontics have been used in the study to establish a direct relationship with the formation of biofilm, this, in turn, helps us to take the right call in choosing a material for a patient with an already compromised systemic condition.

Oral lesions and colonization by yeasts in hemodialysis patients.

BACKGROUND: Patients with chronic kidney disease, stage 5, undergoing hemodialysis treatment are frequently colonized by yeasts, with high chance of developing fungal infections. The objective of this study was to assess the presence of yeasts in the oral cavity of these individuals, associating findings with the presence of oral lesions and the use of dental prostheses. METHODS: Clinical examinations of the oral mucosa were performed in 52 patients, when the use of removable dental prostheses and the presence of oral lesions were observed and recorded. Saliva samples were collected to identify yeast specimens and colony-forming units. RESULTS: Colonization by yeasts was found in 42.31% of the patients, 100% of which belonging to the genus Candida, with the predominance of C. albicans (69.23%). Half of the patients (26) presented some type of oral lesion, the majority (63.33%) suggestive of candidiasis, which was confirmed in 57.89% of cases. The chance that these patients carried yeast colonies in the presence of dental prostheses and oral lesions was 6.33 and 2.62 times higher, respectively. CONCLUSIONS: Patients investigated in this study presented a high incidence of yeasts in the oral cavity, with those with oral lesions and dental prostheses being more likely to carry yeasts. When oral lesions are detected in patients undergoing hemodialysis treatment, particularly in those who are prosthesis users, early diagnosis and treatment of this type of lesion, in association with systemic investigations, should be performed to mitigate possible unfavorable prognoses.

[STUDY OF COLONIZATION PROCESSES AND PERSISTENCE OF MICROORGANISMS IN ARTIFICIAL MATERIALS FOR MEDICAL USE].

AIM: Study processes of microbial colonization and persistence of microorganisms in polymer materials for medical use. MATERIALS AND METHODS: Samples (1 x 1 cm plates) of polymer plastics for production of removable dental prosthesis based on polyurethane and acryl were used, that were incubated with clinical isolates of Pseudomonas aeuruginosa, Staphylococcus aureus in Luria-Bertani broth nutrient media for 24, 48 hours and 7, 14 days and for 1, 5 and 3 months at a temperature of 37 degrees C. Dynamics of interaction process of microorganisms with polymer materials were studied using scanning electron microscope Quanta 200 3D (FEI Company, USA). The samples were fixated after incubation with 10% of neutral formaldehyde, dehydration with alcohols or acetone, typical for SEM, was not carried out, that allowed to conserve the native structure of the samples, including exo-cell matrix of biofilms. RESULTS: Electron-microscopical data on stages of interaction of bacteria with the surface of medical plastics were obtained. Biofilms were shown to be formed on abiotic surfaces and biodestructive changes of plastics appeared. A question on the possibility of prolonged persistence of pathogenic for human microorganisms in artificial prosthesis is discussed. CONCLUSION: The developed experimental model of formation of biofilm on abiotic surfaces could be the basis for carrying out studies directed on the fight with biofilms, by using SEM.

Changes in oral microflora after full-mouth tooth extraction: a prospective cohort study.

AIM: The aim of the study was to evaluate the effect of full-mouth tooth extraction on the oral microflora, with emphasis on the presence and load of Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis. MATERIAL AND METHODS: Adult patients (n = 30), with moderate to advanced periodontitis and scheduled for full-mouth tooth extraction, were consecutively selected. Prior to and 1 and 3 months after full-mouth tooth extraction saliva, tongue, buccal and gingival mucosa and subgingival plaque/prosthesis samples were obtained. Aerobic and anaerobic culture techniques and quantitative real-time polymerase chain reaction (qPCR) were employed for the detection of oral pathogens. RESULTS: Full-mouth tooth extraction resulted in reduction below detection level of A. actinomycetemcomitans and P. gingivalis in 15 of 16 and 8 of 16 previously positive patients using culture techniques and qPCR, respectively. Those patients remaining qPCR positive showed a significant reduction in load of these bacteria. CONCLUSION: Full-mouth tooth extraction significantly changes the oral microflora. These changes include reduction of A. actinomycetemcomitans and P. gingivalis, frequently to levels below detection threshold. In some patients, A. actinomycetemcomitans and P. gingivalis can persist in the edentulous oral cavity up to 3 months after full-mouth tooth extraction.

Anti-biofilm and antibacterial activities of zinc oxide nanoparticles against the oral opportunistic pathogens Rothia dentocariosa and Rothia mucilaginosa.

Species of the genus Rothia that inhabit the oral cavity have recently been implicated in a number of diseases. To minimize their role in oral infections, it is imperative to reduce and/or control the growth and biofilm formation activity of Rothia spp. In this study, two bacterial isolates, Ora-7 and Ora-16, were obtained from the oral cavity of a healthy male subject and identified as Rothia dentocariosa and Rothia mucilaginosa, respectively, using a polyphasic taxonomic approach. Antimicrobial and anti-biofilm formation activities of zinc oxide nanoparticles (ZnO-NPs), of average size 35 nm, were assessed in in vitro assays using Crystal Violet and live and dead staining techniques. The ZnO-NPs exhibited an IC50 value of 53 and 76 µg ml(-1) against R. dentocariosa and R. mucilaginosa, respectively. Biofilm-formation assays, performed on the surfaces of polystyrene plates, artificial teeth, and dental prostheses, revealed the efficacy of ZnO-NPs as a potential antibacterial agent for controlling the growth of Rothia isolates in both planktonic form and biofilm.

Influence of oral conditions on colonization by highly toxigenic Staphylococcus aureus strains.

OBJECTIVES: As the oral cavity is regarded as a relevant site for Staphylococcus aureus colonization and interhuman transmission, this study aimed to investigate whether different oral conditions influence the rates of S. aureus oral carriage and genetic characters of S. aureus isolates. SUBJECTS AND METHODS: Staphylococcus aureus was searched in samples collected from cheek, gingival margin, and anterior nares of 45 healthy subjects, 27 periodontitis affected subjects, and 29 subjects with fixed prosthetic restorations. Isolates were screened for 17 genetic determinants, and Partial Least Square Discriminant Analysis was performed to evaluate whether specific characters correlated with oral condition or site of isolation. RESULTS: The three subject groups showed comparable nasal carriage rates but, both the periodontitis and prosthetic restoration groups showed significantly higher oral carriage rates, as compared to healthy subjects (P = 0.01 and 0.02, respectively). Moreover, periodontitis affected subjects hosted strains possessing a distinct genotypic and phenotypic background, characterized by the presence of a larger number of exotoxins encoding genes. CONCLUSIONS: These data confirm that the oral cavity is an important site of S. aureus colonization and demonstrate that conditions modifying the oral environment, as the presence of periodontitis and of fixed prosthetic restorations, promote S. aureus carriage and may favor the spread of more pathogenic strains.

Antifungal activity of lawsone methyl ether in comparison with chlorhexidine.

OBJECTIVE: The aim of this study was to determine the antifungal activity of lawsone methyl ether mouthwash (LME) in comparison with chlorhexidine mouthwash (CHX) in vitro and in vivo. MATERIALS AND METHODS: For in vitro study, each mouthwash preparation was added into the inoculum of Candida. The turbidity was recorded after incubation at 37°C for 48 h. Candidal culture was performed and the number of colony of Candida albicans was recorded. For in vivo study, a crossover clinical trial was conducted in 22 HIV-infected subjects and 32 denture wearers. Clinical examination was performed and oral rinse technique was carried out immediately before and 0, 1, 2 h after using each mouthwash. Allergy and subjective assessment of the mouthwashes were recorded. Statistical analysis was performed using one-way ANOVA and linear mixed effect modeling. RESULTS: In vitro, antifungal activity of 0.25% LME was significantly greater than that of 0.12% CHX (P < 0.05) and comparable with that of 0.2% CHX. In vivo, antifungal activity up to 2 hours of 0.025% LME mouthwash was evidenced in both groups of subjects, although significantly lower than that of 0.12% CHX. No allergic reaction was reported. LME mouthwash was graded to have less bitter taste than that of CHX. Subjects' satisfaction on taste and smell of LME mouthwash was significantly greater than that of CHX (P < 0.05). CONCLUSIONS: Lawsone methyl ether mouthwash possesses potent antifungal activity both in vitro and in vivo. However, concentration of the mouthwash needs to be adjusted in addition to further clinical trials on long-term use.

A 3D printed microfluidic flow-cell for microscopy analysis of in situ-grown biofilms.

Biofilm phenomena ranging from metabolic processes to attachment, detachment and quorum sensing are influenced by the fluid flow across the biofilm. A number of commercially available flow-cells allow for microscopy analysis of laboratory biofilms under flow, but there is a lack of shear controlled microfluidic devices that accommodate biofilms grown in situ on carriers or tissue samples. Therefore, we developed a flow-cell with adjustable geometry for microscopy analysis of in situ-grown biofilm samples under shear-controlled flow. The flow-cells were designed as one-piece disposable models, 3D-printed in resin and sealed with a coverslip after insertion of the biofilm sample. As a proof of concept, we studied the impact of stimulated saliva flow on pH developments in in situ-grown dental biofilms exposed to sucrose. Under static conditions, pH dropped in the biofilms, with pronounced differences between individual biofilms, but also between different microscopic fields of view within one biofilm. pH in the top layer of the biofilms tended to be lower than pH in the bottom layer. Under conditions of stimulated saliva flow (5 mm/min), pH rose to neutral or slightly alkaline values in all biofilms, and the vertical gradients were reversed, with the biofilm bottom becoming more acidic than the top. Hence, the present work demonstrates the importance of flow for the study of pH in dental biofilms.

Hyposalivation, oral health, and Candida colonization in independent dentate elders.

Hyposalivation is an important problem in elders and could interfere with several oral functions and microbial ecology. While the number of independent elders who retain more natural teeth increases worldwide, few studies examined hyposalivation in this population. Thus, this study aims to examine relationships between hyposalivation, oral health conditions and oral Candida colonization in independent dentate elders and evaluate factors associated with salivary flow and Candida carriage. We conducted a cross-sectional study in fifty-three dentate elders (≥65 years old with at least 4 pairs of posterior occlusal contacts) with no, or well-controlled, systemic conditions. Participants were interviewed for medical history, subjective dry mouth symptoms, oral hygiene practices and denture information. Unstimulated and stimulated salivary flow rates, objective dry mouth signs, gingival, tongue-coating, and root-caries indices were recorded. Stimulated saliva was cultured on Sabouraud-dextrose agar for Candida counts. Candida species were identified using chromogenic Candida agar and polymerase chain reaction. Statistical significance level was set at p<0.05. The results showed that hyposalivation was associated with higher gingival and tongue-coating indices (p = 0.003 and 0.015, respectively), but not root-caries index. Hyposalivation was also associated with higher prevalence of oral Candida colonization (p = 0.010; adjusted OR = 4.36, 95% confidence interval = 1.29-14.72). These two indices and Candida load were negatively correlated with unstimulated and stimulated salivary flow rates. Interestingly, non-albicans Candida species were more prevalent in denture wearers (p = 0.017). Hence, hyposalivation is a risk factor for poorer oral health and oral Candida colonization in independent dentate elders. Because of its potential adverse effects on oral and systemic health, hyposalivation should be carefully monitored in elders.

Oral Biofilm on Dental Materials Among Khat Chewers.

BACKGROUND: Nowadays khat chewing habit is increasing among population in southern part of Saudi Arabia, Jazan and till date there is no literature investigating the effect of khat on oral biofilm on dental materials. OBJECTIVE: To evaluate and compare the bacterial biofilm on different types of dental restorative materials used in replacing missing tooth structures among khat chewers and non-khat chewers. MATERIALS AND METHODS: Hundred and twenty biofilm samples were collected from different dental restorations, such as All-ceramic (AL), Metal Ceramic (MC), Metal crowns or bridges (M), Composite (C), Glass Ionomer (GI) and Amalgam (A) restorations in non-khat and khat chewers (K). DNA extraction was done and subjected to PCR. Bacterial species, such as Streptococcus, Neisseria, Bacillus, Granulicatella and Veillonella were identified and counted. PCR products were also sequenced to detect similarity. Association between bacterial type and dental materials among non-khat and khat chewers were tested with Chi-Square test (Fishers Exact test). RESULTS: The frequency and percentage of Streptococcus species were marginally higher among khat chewers (42; 70%) compared with non-khat chewers (38; 63.3%) group. But the Veillonella species were higher among non-khat chewers (9: 15%), compared to the khat chewers group (7; 11.7%). No statistically significant difference was detected among species in both groups. In non-khat and khat chewer group, the maximum hits were related to Streptococcus spp. in glass ionomer, amalgam, and composite (restorative materials), followed by metal ceramic and metal (prosthetic materials). Veillonella spp. showed maximum hits in the metal group among non-khat chewers and in all-ceramic among khat chewers. Statically significant differences were recorded among composite and amalgam samples with p values 0.047 and 0.036 in khat chewer group. CONCLUSION: Khat chewers showed statistically significant differences in oral biofilm in the composite and amalgam restorative materials, but there were no significant differences found among any materials and species between the groups.

Cytotoxicity and antimicrobial effects of citronella oil (Cymbopogon nardus) and commercial mouthwashes on S. aureus and C. albicans biofilms in prosthetic materials.

Although the effectiveness of some mouthwashes has been proven, phytotherapy is still a field to be explored as an alternative to commercial products. OBJECTIVE: To evaluate, in vitro, the cytotoxicity and efficacy of two solutions based on citronella oil (CN), on S. aureus and C. albicans biofilms (in formation-adhesion phase and 24 h-biofilm formation) on acrylic resin and nickel-chromium alloy samples (one trademark of each material), compared to two alcohol-free commercial mouthwashes. MATERIAL AND METHODS: Two solutions containing CN at concentrations of 5x and 10x the minimum bactericidal/fungicidal concentration (MBC/MFC) were prepared by microdilution. After contamination of the samples surfaces with these microorganisms, the mouthwashes (CN - 5x and 10x; CHX - 0,12% alcohol-free chlorhexidine and LT - alcohol-free essential oils) were evaluated. Mouthwash simulation was performed for 1 min at two moments, the first simulation after 4 h of microbial adhesion and 24 h-biofilm formation, and the second simulation, 6 h after the first simulation. For biofilm quantification, the number of cultured cells was evaluated by CFUs. The cytotoxicity assay was performed on HaCat epithelial cells and quantified by the MTT method. RESULTS: Tested solutions completely inhibited the growth of both microorganisms in the adhesion phase. All solutions showed inhibitory activity against 24 h-biofilm formation. However, CN led to greater microbial reduction, regardless of the surface of the sample. All solutions demonstrated a toxic effect. However, after serial dilution, CN presented the lowest cytotoxic effect. CONCLUSION: Citronella had a lower cytotoxic effect and a higher action compared to commercial solutions.

The underestimated problem of oral Candida colonization-An observational pilot study in one nursing home.

Objectives: Older people are at increased risk of intraoral yeast colonization. In this observational case series, we assessed Candida colonization among nine nursing home residents to investigate possible correlations with their individual characteristics, general health parameters, and oral care. We also described the effect of professional dental cleaning (PDC) including prosthesis cleaning on colonization cases. Materials and methods: General clinical and oral health was assessed in nine residents, and samples were taken from six oral mucosa sites or prosthetic surfaces. PDC was performed to achieve macroscopically clean results, and residents were re-examined 2 weeks later. Results: We found that six residents were intraorally colonized with Candida albicans; four also had Candida glabrata. Prostheses were particularly infected. Dementia, multimorbidity, and presence of prostheses reduced oral hygiene ability; requiring assistance for oral hygiene care was a risk indicator for Candida colonization. PDC reduced C. albicans (at the expense of increased C. glabrata) but was not optimal for maintaining Candida reduction. Conclusion: In this pilot study, Candida colonization is prevalent among nursing home residents, especially those with cognitive impairment, multimorbidity, or reduced oral hygiene capacity. Potential negative effects on general health necessitate diagnostic and therapeutic guidelines. PDC alone did not maintain the reduction in Candida colonization; additional methods for daily oral care are necessary.

A comparative evaluation of the effect of phototherapy of fiber post on its bond strength to dental composite.

The aim of the study was to evaluate the effect of diode laser as a phototherapy on surface treatment of fiber post and its bond strength to resin core build-up material. In this in-vitro study fifty fiber post of 1 mm tip-diameter and 20 mm length were used. The posts were mounted and randomly divided into 5 groups (n = 10) according to different surface treatment methods i.e. Group 1: Control, Group 2: Application of 37% Phosphoric Acid, Group 3: Treated with 40% H2O2, Group 4: Sandblasted with 50 µm aluminium oxide particles and Group 5: treated with diode laser. In all specimens including control, a cylinder of resin composite around the fiber post was made. All Specimens were mounted in a universal testing machine. Push-out test was performed and bond strengths were calculated. Using analysis of variance (ANOVA) and post hoc Tukey multiple comparisons test, means of push out bond strength were compared among the study groups. The highest bond strength was shown among Sandblasted [50 µm, Aluminium Oxide (Al2O3)] group [139.86] and the lowest push-out bond strength was observed in Control specimens [75.73]. The bond strength values of fiber post treated with Diode laser [100.81] and 40% H2O2 [105.64] were comparable.

[Control of cross-contamination in dental prostheses laboratories in Galicia]. / Control de la infección cruzada en los laboratorios de prótesis dental de Galicia.

BACKGROUND: Dental laboratories are a potential source of cross-contamination. This study aims to assess its control in Galicia. METHODS: Voluntary random telephone interviews resulted in 149 completed questionnaires. The variables are described by percentages or means and standard deviations. A bivariate analysis was undertaken using the Chi square test. RESULTS: Participants were mostly middle-age (mean=45.7, SD=9.8) males (68.5%) with 20.8 (SD=10.5) years of professional experience in middle-size urban (58.4%) laboratories, who identified a higher risk when receiving items from the clinic (80.6%). Most technicians (57.7%) have a written protocol. Many (55.0%), significantly older males, do not check for item disinfection. Most technicians use gloves (62.4%) particularly younger staff at larger laboratories. Fifty-five point seven percent had been vaccinated against hepatitis B. Only 22.0% of technicians reported receiving training in cross-contamination control. CONCLUSIONS: Identified cross-infection control practices are below standards, and lack of training and protocols are a matter for concern.

Effect of surface characteristics on adherence of S. mutans biofilms to indirect resin composites.

The purpose of this study was to evaluate the adherence of biofilms to the surfaces of two indirect resin composites, Estenia C&B and Gradia. Slabs were prepared from the materials, and then either ground with 800-grit silicon carbide paper or polished with diamond pastes up to 1 microm. Artificial biofilms of Streptococcus mutans were grown on the composite slabs in an artificial mouth system for 20 hours. Thereafter, the amounts of retained biofilm on the surfaces were measured after sonication. Surface characteristics of the resins--such as surface roughness, amount of residual monomers, and distribution of filler particles--were examined. Two-way ANOVA revealed that the amount of retained biofilm varied (p<0.05) according to the composition and surface roughness of the material. In particular, biofilm adherence was lowest on Estenia C&B slabs when polished with diamond pastes up to 1 microm. It was thus concluded that the surface roughness and composition of a resin composite influenced biofilm adherence.