[Determination of lead and isotope ratios in whole blood by inductively coupled plasma mass spectrometry].

OBJECTIVE: To establish a method to determine lead and Isotope Ratios in whole blood by inductively coupled plasma mass spectrometry (ICP-MS). METHODS: The whole blood samples was removed protein by 5% nitric acid , Online join thallium (Tl) as internal standard substance, used lyophilized bovine blood lead and cadmium standard material (GBW09139h and GBW09140h) for quality control of blood lead concentrations. Lead isotope standard substances (GBW04426) is used to determine the correction factor, lead isotope ratios will lead isotope standard reference material NIST SRM981 by icp-ms with samples for testing. RESULTS: Optimize the detection method, detection of blood lead and lead isotope, and the method of linear range r >0.9999, GBW09139h and GBW09140h test results are within the scope of quality control. NIST SRM981 isotope determination precision RSD<1%, NIST SRM981 test results and the certificate of value close to. CONCLUSION: The method is simple and convenient data is reliable, can meet the total lead (pb) in blood and former isotope simultaneous determination.

Successful application of lead isotopes in source apportionment, legal proceedings, remediation and monitoring.

In late 2006, the seaside community in Esperance Western Australia was alerted to thousands of native bird species dying. The source of the lead (Pb) was determined by Pb isotopes to derive from the handling of Pb carbonate concentrate through the Port, which began in July 2005. Concern was expressed for the impact of this on the community. Our objectives were to employ Pb isotope ratios to evaluate the source of Pb in environmental samples for use in legal proceedings, and for use in remediation and monitoring. Isotope measurements were undertaken of bird livers, plants, drinking water, soil, harbour sediments, air, bulk ceiling dust, gutter sludge, surface swabs and blood. The unique lead isotopic signature of the contaminating Pb carbonate enabled diagnostic apportionment of lead in samples. Apart from some soil and water samples, the proportion of contaminating Pb was >95% in the environmental samples. Lead isotopes were critical in resolving legal proceedings, are being used in the remediation of premises, were used in monitoring of workers involved in the decontamination of the storage facility, and monitoring transport of the concentrate through another port facility. Air samples show the continued presence of contaminant Pb, more than one year after shipping of concentrate ceased, probably arising from dust resuspension. Brief details of the comprehensive testing and cleanup of the Esperance community are provided along with the role of the Community. Lead isotopic analyses can provide significant benefits to regulatory agencies, interested parties, and the community where the signature is able to be characterised with a high degree of certainty.

High-Precision (MC-ICPMS) Isotope Ratio Analysis Reveals Contrasting Sources of Elevated Blood Lead Levels of an Adult with Retained Bullet Fragments, and of His Child, in Milwaukee, Wisconsin.

Exposure to the neurotoxic element lead (Pb) continues to be a major human health concern, particularly for children in US urban settings, and the need for robust tools for assessment of exposure sources has never been greater. The latest generation of multicollector inductively coupled plasma mass spectrometry (MC-ICPMS) instrumentation offers the capability of using Pb isotopic signatures as a tool for environmental source tracking in public health. We present a case where MC-ICPMS was applied to isotopically resolve Pb sources in human clinical samples. An adult male and his child residing in Milwaukee, Wisconsin, presented to care in August 2015 with elevated blood lead levels (BLLs) (>200 µg/dL for the adult and 10 µg/dL for the child). The adult subject is a gunshot victim who had multiple bullet fragments embedded in soft tissue of his thigh for approximately 10 years. This study compared the high-precision isotopic fingerprints (<1 ‰ 2σ external precision) of Pb in the adult's and child's whole blood (WB) to the following possible Pb sources: a surgically extracted bullet fragment, household paint samples and tap water, and a Pb water-distribution pipe removed from servicing a house in the same neighborhood. Pb in the bullet and adult WB were nearly isotopically indistinguishable (matching within 0.05-0.56 ‰), indicating that bullet fragments embedded in soft tissue could be the cause of both acute and chronic elevated blood Pb levels. Among other sources investigated, no single source dominated the child's exposure profile as reflected in the elevated BLL.

The effect of exposure to employees from mining and milling operations in a uranium mine on lead isotopes--a pilot study.

Potential exposure during mining and milling of uranium ore has resulted in the industry being highly regulated. Exposure can arise from inhalation of the daughter product radioactive gas radon (222Rn), inhalation of radioactive dust particles from mining and milling, direct irradiation from outside the body, and ingestion of radionuclides (e.g. uranium or radium) in food or water. Making use of the highly unusual lead isotopic signature for uranium ores (high 206Pb/204Pb from the high uranium content, low 208Pb/204Pb from the low Th/U ratio), we undertook a pilot study of nine male mine employees and three controls from the Ranger uranium mine in the Northern Territory Australia to determine if it was feasible to use lead isotopes in blood to identify exposure to uranium-derived materials. The lead isotopic data for the mine employees and controls plot in two distinct fields which are consistent with predicted isotopic patterns. Assuming retention of 10% of the ingested lead, then the increases seen in 206Pb represent intakes of between 0.9 and 15 mg, integrated over the years of exposure. The small amount of lead does not affect blood lead concentrations, but appears to be sufficient to be detectable with sensitive isotopic methods. Further studies, including those on urine, should be undertaken to confirm the veracity of the lead isotope method in monitoring exposure of uranium industry employees.

Blood-lead levels of monkeys treated with a lead-containing (N2) root canal cement: a preliminary report.

The effect of a root canal filling material on the level of lead in blood of rhesus monkeys was examined by anodic stripping voltometry. Blood-lead levels after root canal treatment with N2 cement were elevated when compared to preoperative controls. Lead 210 was incorporated into the leadfree N2 cement to identify the source of lead. Analyses of blood samples for 210Pb indicated that the lead originated from the filling material.

The treatment of solid tumors by alpha emitters released from (224)Ra-loaded sources-internal dosimetry analysis.

Diffusing alpha-emitters radiation therapy (DART) is a proposed new form of brachytherapy, allowing the treatment of solid tumors by alpha particles. DART utilizes implantable sources carrying small activities of radium-224, which continually release into the tumor radon-220, polonium-216 and lead-212 atoms, while radium-224 itself remains fixed to the source. The released atoms disperse inside the tumor by diffusive and convective processes, creating, through their alpha emissions, a high-dose region measuring several mm in diameter about each source. The efficacy of DART has been demonstrated in preclinical studies on mice-borne squamous cell carcinoma and lung tumors and the method is now being developed toward clinical trials. This work studies DART safety with respect to the dose delivered to distant organs as a result of lead-212 leakage from the tumor through the blood, relying on a biokinetic calculation coupled to internal dose assessments. It is found that the dose-limiting organs are the kidneys and red bone marrow. Assuming a typical source spacing of approximately 5 mm and a typical radium-224 activity density of 0.4-0.8 MBq g(-1) of tumor tissue, it is predicted that tumors weighing up to several hundred grams may be treated without reaching the tolerance dose in any organ.

Determining lead sources in Mexico using the lead isotope ratio.

OBJECTIVE: Lead poisoning can, in some cases, be traced to a specific route or source of exposure on the basis of the individual's blood lead isotope ratio. To assess the major source of lead exposure among women residing in Mexico City, we compared blood, ceramic, and gasoline lead isotope ratios. MATERIAL AND METHODS: The study population, randomly selected from participants of a large trial, (1/1996-12/1996) comprised of 16 women whose lead levels exceeded 10 micrograms/dl and who reported using lead-glazed ceramics. Lead isotope ratios were performed on a Perkin Elmer 5000 Inductively Coupled Plasma Mass Spectrometer (ICP-MS) interfaced with a Perkin Elmer HGA-600MS Electrothermal Vaporization System (ETV). RESULTS: The isotope ratios (206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb) of both the blood specimens and their corresponding ceramic specimens were highly correlated, with r = 0.9979, r2 = 0.9958, r = 0.9957, r2 = 0.9915 and r = 0.9945, r2 = 0.9890 values for the three isotope ratios, respectively, suggesting that the lead exposure most likely resulted from the use of these ceramic. Measurements of lead isotope ratios from leaded gasoline in use at the time of blood sampling, differed from those in blood and ceramics. CONCLUSIONS: Determining lead isotope ratios can be an efficient tool to identify a major source of lead exposure and to support the implementation of public health prevention and control measures. This paper is available too at: http://www.insp.mx/salud/index.html.

The effects of CaNa(2)EDTA on brain lead mobilization in rodents determined using a stable lead isotope tracer.

Studies have demonstrated the efficacy of CaNa(2)EDTA for reducing lead (Pb) levels in blood and soft tissues, including brain. However, a concern remains that a single dose of CaNa(2)EDTA may cause a significant increase in brain Pb levels due to a redistribution of endogenous Pb. Here we utilized a rodent model of Pb exposure in combination with a sensitive stable Pb isotope tracer methodology to assess the effects of CaNa(2)EDTA chelation treatment on the redistribution of Pb in brain, blood, kidney, and bone tissues. Thirty-two adult female albino rats (n = 6-7 animals/group) were exposed to 100 microg Pb/mL in drinking water for 4 weeks. Stable (204)Pb tracer was administered via i.p. injection over 2 days prior to chelation. CaNa(2)EDTA was administered i.p. at a dose of 150 mg/kg/day for 1 to 5 days. Statistical differences were evaluated with univariate ANOVA. Under the Pb exposure and chelation treatment regimens utilized here, there was no evidence of a measurable redistribution of endogenous Pb (as total Pb or labile (204)Pb tracer) into the brain after a single CaNa(2)EDTA dose. Further, CaNa(2)EDTA was not efficacious in measurably reducing brain or bone Pb levels, although brain levels of labile (204)Pb tracer were significantly reduced after 5 days of chelation. CaNa(2)EDTA treatment was effective in significantly reducing both blood and kidney Pb levels. Overall, these data substantiate the efficacy of CaNa(2)EDTA for reducing soft tissue Pb levels, but not total brain Pb, and they do not support concern for a transient increase in brain Pb levels with treatment.

Determining lead sources in Mexico using the lead isotope ratio

OBJECTIVE: Lead poisoning can, in some cases, be traced to a specific route or source of exposure on the basis of the individual's blood lead isotope ratio. To assess the major source of lead exposure among women residing in Mexico City, we compared blood, ceramic, and gasoline lead isotope ratios. MATERIAL AND METHODS: The study population, randomly selected from participants of a large trial, (1/1996-12/1996) comprised of 16 women whose lead levels exceeded 10 æg/dl and who reported using lead-glazed ceramics. Lead isotope ratios were performed on a Perkin Elmer 5000 Inductively Coupled Plasma Mass Spectrometer (ICP-MS) interfaced with a Perkin Elmer HGA-600MS Electrothermal Vaporization System (ETV). RESULTS: The isotope ratios (206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb) of both the blood specimens and their corresponding ceramic specimens were highly correlated, with r=0.9979, r²=0.9958, r=0.9957, r²=0.9915 and r=0.9945, r²=0.9890 values for the three isotope ratios, respectively, suggesting that the lead exposure most likely resulted from the use of these ceramic. Measurements of lead isotope ratios from leaded gasoline in use at the time of blood sampling, differed from those in blood and ceramics. CONCLUSIONS: Determining lead isotope ratios can be an efficient tool to identify a major source of lead exposure and to support the implementation of public health prevention and control measures.