Hard tissue formation in pulpotomized primary teeth in dogs with nanomaterials MCM-48 and MCM-48/hydroxyapatite: an in vivo animal study.

BACKGROUND: This animal study sought to evaluate two novel nanomaterials for pulpotomy of primary teeth and assess the short-term pulpal response and hard tissue formation in dogs. The results were compared with mineral trioxide aggregate (MTA). METHODS: This in vivo animal study on dogs evaluated 48 primary premolar teeth of 4 mongrel female dogs the age of 6-8 weeks, randomly divided into four groups (n = 12). The teeth underwent complete pulpotomy under general anesthesia. The pulp tissue was capped with MCM-48, MCM-48/Hydroxyapatite (HA), MTA (positive control), and gutta-percha (negative control), and the teeth were restored with intermediate restorative material (IRM) paste and amalgam. After 4-6 weeks, the teeth were extracted and histologically analyzed to assess the pulpal response to the pulpotomy agent. RESULTS: The data were analyzed using the Kruskal‒Wallis, Fisher's exact, Spearman's, and Mann‒Whitney tests. The four groups were not significantly different regarding the severity of inflammation (P = 0.53), extent of inflammation (P = 0.72), necrosis (P = 0.361), severity of edema (P = 0.52), extent of edema (P = 0.06), or connective tissue formation (P = 0.064). A significant correlation was noted between the severity and extent of inflammation (r = 0.954, P < 0.001). The four groups were significantly different regarding the frequency of bone formation (P = 0.012), extent of connective tissue formation (P = 0.047), severity of congestion (P = 0.02), and extent of congestion (P = 0.01). No bone formation was noted in the gutta-percha group. The type of newly formed bone was not significantly different among the three experimental groups (P = 0.320). CONCLUSION: MCM-48 and MCM-48/HA are bioactive nanomaterials that may serve as alternatives for pulpotomy of primary teeth due to their ability to induce hard tissue formation. The MCM-48 and MCM-48/HA mesoporous silica nanomaterials have the potential to induce osteogenesis and tertiary (reparative) dentin formation.

The application of lasers in vital pulp therapy: clinical and radiographic outcomes.

The main purpose of vital pulp therapy (VPT) is to preserve the integrity and function of the pulp. A wide variety of materials and techniques have been proposed to improve treatment outcomes, and among them, the utilization of lasers has gained significant attention. The application of lasers in different stages of VPT has witnessed remarkable growth in recent years, surpassing previous approaches.This study aimed to review the applications of lasers in different steps of VPT and evaluate associated clinical and radiographic outcomes. An electronic search using Scopus, MEDLINE, Web of Science and Google Scholar databases from 2000 to 2023 was carried out by two independent researchers. The focus was on human studies that examined the clinical and/or radiographic effects of different laser types in VPT. A total of 4243 studies were included in this narrative review article. Based on the compiled data, it can be concluded that although current literature suggests laser may be proposed as an adjunct modality for some procedural steps in VPT, more research with standardized methodologies and criteria is needed to obtain more reliable and conclusive results.

Histological evaluation of the regenerative potential of a novel photocrosslinkable gelatin-treated dentin matrix hydrogel in direct pulp capping: an animal study.

BACKGROUND: To assess histologically the success of the pulp capping approach performed in traumatically exposed dogs' teeth using a novel injectable gelatin-treated dentin matrix light cured hydrogel (LCG-TDM) compared with LCG, MTA and TheraCal LC. METHODS: Sixty-four dogs' teeth were divided into two groups (each including 32 teeth) based on the post-treatment evaluation period: group I: 2 weeks and group II: 8 weeks. Each group was further subdivided according to the pulp capping material into four subgroups (n = 8), with subgroup A (light-cured gelatin hydrogel) as the control subgroup, subgroup B (LCG-TDM), subgroup C (TheraCal LC), and subgroup D (MTA). Pulps were mechanically exposed in the middle of the cavity floor and capped with different materials. An assessment of periapical response was performed preoperatively and at 8 weeks. After 2 and 8-week intervals, the dogs were sacrificed, and the teeth were stained with hematoxylin-eosin and graded by using a histologic scoring system. Statistical analysis was performed using the chi-square and Kruskal-Wallis tests (p = 0.05). RESULTS: All subgroups showed mild inflammation with normal pulp tissue at 2 weeks with no significant differences between subgroups (p ≤ 0.05), except for the TheraCal LC subgroup, which exhibited moderate inflammation (62.5%). Absence of a complete calcified bridge was reported in all subgroups at 2 weeks, while at 8 weeks, the majority of samples in the LCG-TDM and MTA-Angelus subgroups showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between them (p ≤ 0.05). However, the formed dentin in the LCG-TDM group was significantly thicker, with layers of ordered odontoblasts identified to create a homogeneous tubular structure and numerous dentinal tubule lines suggesting a favourable trend towards dentin regeneration. TheraCal LC samples revealed a reasonably thick dentin bridge with moderate inflammation (50%) and LCG showed heavily fibrous tissue infiltrates with areas of degenerated pulp with no signs of hard tissue formation. CONCLUSIONS: LCG-TDM, as an extracellular matrix-based material, has the potential to regenerate dentin and preserve pulp vitality, making it a viable natural alternative to silicate-based cements for healing in vivo dentin defects in direct pulp-capping procedures.

Comparative Evaluation of Effectiveness of Calcium Hydroxide, MTA, and TheraCal LC in Indirect Pulp Capping in Primary Molars: In Vivo Study.

AIM: This investigation aimed to observe the effects of Dycal, mineral trioxide aggregate (MTA), and TheraCal LC, as indirect pulp-capping materials in primary molars. MATERIALS AND METHODS: About 75 children with lower primary molars aged between 4 and 7 years suggested for IPC were selected and randomly allocated into: Group I - Dycal, group II - MTA, and group III - TheraCal LC. An immediate postoperative radiograph was taken after the procedure. Recall examination was done after 3 and 6 months for clinical and radiographic assessment. The radiographs were digitized, and the amount of thickness of dentin was assessed using Corel Draw software. The values were tabulated and subjected to paired t-tests and independent t-tests for intra and intergroup analysis, respectively. The p-value < 0.05 was considered statistically significant. RESULTS: There was a statistically significant increase in dentin thickness in the first 3 months compared to the 6-month follow-up. At the end of the research phase, TheraCal LC had more tertiary dentin deposited than MTA, followed by Dycal. CONCLUSION: TheraCal LC can be a reliable indirect pulp-capping agent in primary teeth. CLINICAL SIGNIFICANCE: Indirect pulp capping (IPC) is a very extensively employed treatment regimen to manage extensive caries. For many decades, calcium hydroxide has been regarded as the benchmark of pulp capping materials. With several advancements in materials for restoration, TheraCal LC a resin-modified, light-cured calcium silicate-filled liner serves as a pulp-capping agent and dentin protector, promoting pulp healing and preserving vitality as an obstacle cum protector of the dental pulp complex. How to cite this article: Thomas NA, Jobe J, Thimmaiah C, et al. Comparative Evaluation of Effectiveness of Calcium Hydroxide, MTA, and TheraCal LC in Indirect Pulp Capping in Primary Molars: In Vivo Study. J Contemp Dent Pract 2024;25(4):365-371.

Determining Factors in the Success of Direct Pulp Capping: A Systematic Review.

AIM: To elucidate the factors that determine the success of direct pulp capping (DPC) in permanent teeth with pulp exposure due to dental caries. MATERIALS AND METHODS: A comprehensive electronic search from 1980 to 2023 across PubMed, Scopus, and ISI Web databases was conducted using specific keywords and MeSH terms in Q1 or Q2 journals. Only prospective/retrospective clinical studies in English on 15 or more human permanent teeth with carious pulpal exposure treated with DPC agents-mineral trioxide aggregate (MTA), Biodentine, or calcium hydroxide with a rubber dam and minimum 1-year follow-up, were considered. The factors retrieved and analyzed were based on study design, patient age, sample size, type of cavity, exposure size and location, pulp diagnosis, solutions to achieve hemostasis, hemostasis time, capping material, restoration type, follow-up period, methods of evaluation, and overall success. REVIEW RESULTS: Out of 680 articles, only 16 articles were selected for the present systematic review on application of the selection criteria. A wide age range of patients from 6 to 88 years were considered among these studies with sample sizes ranging from 15 to 245 teeth with reversible pulpitis being the predominant diagnosis of the cases. Mineral trioxide aggregate as a capping material was evaluated in 4 studies as a lone agent, while compared with other capping agents such as biodentine or calcium hydroxide in 7 studies. The follow-up period ranged from 9 days to nearly 80 months. While both clinical and radiographic evaluation was carried out in all studies, cold testing dominated the clinical tests while IOPR was the common radiograph considered. Mineral trioxide aggregate success rate was higher and similar to biodentine than calcium hydroxide. CONCLUSION: Direct pulp capping has a high and predictable success rate in permanent teeth with carious exposure to reversible and irreversible pulpitis. Currently, mineral trioxide aggregate and biodentine have better long-term results in DPC than calcium hydroxide, hence, they should be used as an alternative to calcium hydroxide. Definitive restoration within a short period improves long-term prognosis. CLINICAL SIGNIFICANCE: The significance of this review lies in its provision of evidence-based information on the effectiveness of DPC and the factors that influence its success. By considering these factors, clinicians can optimize treatment outcomes and improve the long-term prognosis of the treated teeth. This systematic review serves as a valuable resource for clinicians and researchers in the field of endodontics. How to cite this article: Gomez-Sosa JF, Granone-Ricella M, Rosciano-Alvarez M, et al. Determining Factors in the Success of Direct Pulp Capping: A Systematic Review. J Contemp Dent Pract 2024;25(4):392-401.

Examination of surface porosity of current pulp capping materials by micro-computed tomography (micro-CT) method.

When dental pulp is exposed, it must be covered with a biocompatible material to form reparative dentine. The material used, besides being biocompatible, should have an ideal surface structure for the attachment, proliferation and differentiation of dental pulp stem cells. This study aimed to evaluate the porosity of the microstructures of four pulp capping materials using micro-computed tomography (micro-CT). Biodentine, Bioaggregate, TheraCal and Dycal materials were prepared according to the manufacturer's instructions using 2 × 9 mm Teflon molds. A total of 60 samples, 15 in each group, were scanned using micro-CT. Open and closed pores and the total porosity of the microstructures of the materials were assessed. The findings obtained from the study were analyzed via the Kruskal-Wallis test followed by the Mann-Whitney U test. The porosity of Bioaggregate was significantly higher than that of Biodentine, Dycal and TheraCal in all porosity values. While Biodentine did not show a statistically significant difference in open and total porosity values from either TheraCal or Dycal, closed porosity values of Dycal were significantly higher than those of Biodentine and TheraCal. Because of the affinity of cells to porous surfaces, the pulp capping materials' microstructure may affect the pulp capping treatment's success. From this perspective, the use of Bioaggregate in direct pulp capping may increase the success of treatment.

What do we really know about vital pulp therapy?

DESIGN: Retrospective cohort study using STROBE cohort reporting guidelines. COHORT SELECTION: Patients from Mehr Dental Clinic in Tehran, Iran, who received different types of vital pulp therapy (VPT) by a single endodontist, due to carious pulpal exposure, between April 2011 and October 2022. These were: Full Pulpotomy (FP), Miniature Pulpotomy (MP) and Direct Pulp Capping (DPC). Data were accessed via the dental clinic's electronic database. Patients were deemed eligible if they had pulpal exposure due to caries, but not trauma. Pre-operative, immediate post-operative and at least one follow-up radiograph at a minimum 3-month interval were required. Demographic, diagnostic, and procedural data as well as informed consent were also required. Teeth with probing depths greater than 4 mm or pulpal necrosis were excluded. DATA ANALYSIS: Patient, tooth and treatment factors were statistically analysed for an outcome of success or failure using a Cox proportional hazards model. Kaplan/Meier curves were used to establish the mean survival times. The Log-rank test was used to compare survival across the three treatment groups. The Omnibus test of model and the -2 log likelihood ratio (-2LL) were used to assess sensitivity and model fitness. Statistical analyses were determined using the IBM SPSS Statistics for Windows Version 21.0, with P value set at <0.05. RESULTS: 1257 VPTs from 1149 patients had complete data and were used in the analysis. 802 cases were excluded due to no follow up radiograph. The VPT cases were divided into FP (n = 272), MP (n = 217) and DPC (n = 768). The average follow up was 42.21 months, with an overall 116-month survival rate of 99.1% and success rate of 91.6%. FP had a mean survival time of 99.43 months; for MP it was 104.26 months; for DPC it was 102.27 months. There were no significant differences between these groups (P = 0.363). There were statistically significant correlations between symptomatic Irreversible Periodontitis (IP), radiographic signs of Apical Periodontitis (AP), restoration type, restoration surfaces and the outcome of VPT. CONCLUSIONS: This is one of the largest cohort studies of its kind, with over 1250 cases of various VPT techniques in 10 years. There was deviation from gold standard practice, with lack of rubber dam. A lack of haemostasis after 2 min could be construed as bacterially infected pulpal tissue and require further resection of pulp. Yet, these approaches still resulted in successful outcomes. Another interesting finding was that symptomatic IP with associated AP was treated with VPT, with a 78% success rate. Considering this study and other emerging evidence in the literature, application of VPT as an alternative to conventional Root Canal Treatment could be adopted in general practice, depending on the skills and knowledge of the practitioner and patient preferences.

Three-Dimensional Assessment of Radiographic Changes after Indirect Pulp Capping Using Silver Diamine Fluoride with or without Potassium Iodide in Young Permanent Teeth (12-Month RCT).

The aim of this study was to conduct a three-dimensional (3D) evaluation of radiographic changes after indirect pulp capping (IPC) with silver diamine fluoride (SDF) with or without potassium iodide (KI) and resin-modified glass ionomer cement (RMGIC) in deep carious young permanent molars using cone-beam computed tomography (CBCT). 108 first permanent molars with deep occlusal cavitated caries lesions, in forty-nine 6- to 9-year-old children, were randomly allocated to one of 3 groups (n = 36) and treated with SDF+KI, SDF, and RMGIC as IPC materials. CBCT scans were taken at 0 and 12 months to assess tertiary dentin formation (volume and grey level intensity), increase in root length, and pathological changes such as secondary caries, periapical radiolucency, internal resorption, and obliteration of the pulp. The 3D image analysis procedures were performed using ITK-SNAP and 3D Slicer CMF. Comparisons were made using analysis of variance with a fixed effect for treatment and random effects for patient and patient-by-treatment to account for within-patient correlations. A two-sided 5% significance level was used. There were no significant differences among the three groups regarding tertiary dentin volume (p = 0.712) and grey level intensity (p = 0.660), increase in root length (p = 0.365), prevention of secondary caries (p = 0.63), and periapical radiolucency (p = 0.80) in the analysed 69 CBCT scans. The study did not find differences among the groups regarding quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure as shown by CBCT. Clinical Significance: The results show no significant differences in radiographic outcomes (quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure) when using SDF+KI, SDF, and RMGIC in IPC. The results of this study can help guide treatment decision-making regarding use of SDF and SDF+KI as IPC materials in deep cavitated lesions.

Nano eggshell-based slurry as a direct pulp-capping material: In vitro characterization and histopathological assessment in an experimental animal model.

AIM: Pulp vitality is essential for tooth integrity. Following pulp exposure, choosing a suitable pulp-capping material is crucial to maintain pulp vitality. However, the reparative dentine bridge created by calcium hydroxide (Ca(OH)2 ) is generally porous and incomplete. The aim of the current study is to assess the in vitro and in vivo bioactivities of nano eggshell-based slurry (NES), using NES as a direct pulp-capping material, compared with Ca(OH)2 in rabbit animal model. METHODOLOGY: Nano eggshell powder (NE) was characterized for particle morphology, chemical composition and ion release. In vitro bioactivity was tested by immersion in simulated body fluid (SBF) for 7 days. For histopathological evaluation, 36 adult New Zealand rabbits (72 pulp exposures) were divided into nine groups (n = 8) according to the pulp-capping material (NES, Ca(OH)2 and no capping as negative control group) and the animals were sacrificed after 7, 14 or 28 days. The pulps of the two lower central incisors were exposed and then directly capped by Ca(OH)2 or NES or left untreated. The cavities were then sealed with glass ionomer cement. Teeth were collected for histopathological evaluation using an optical microscope. Pulp haemorrhage, inflammation, fibrosis and calcific bridge formation were assessed. Results were statistically analysed using anova and Tukey's tests. RESULTS: Nano eggshell particles were spherical with a 20 nm diameter and were composed mainly of calcite. Statistical analysis showed that there was a significant increase in the release of all investigated ions between days 1 and 28, except for copper. NES group showed a significantly higher release of all elements as compared to Ca(OH)2 . Environmental scanning electron microscope micrographs of NES incubated for 7 days in SBF showed the formation of HAp with a Ca/P ratio (1.686). For histopathological evaluation, the difference between groups was statistically significant. At day 28, 75% of the pulps of the Ca(OH)2 group showed mild calcific bridge in comparison with 100% moderate calcific bridge in the NES group. The NES group showed significantly less inflammation at days 7 and 28, and higher fibrosis at day 7 compared with Ca(OH)2 . CONCLUSIONS: Nano eggshell-based slurry represents a promising novel direct pulp-capping material with favourable pulp tissue response.

Effectiveness of vital pulp treatment in managing nontraumatic pulpitis associated with no or nonspontaneous pain: A systematic review.

BACKGROUND: The exposed pulp has been the topic of numerous studies, but well-designed and well-executed comparative trials on the outcome and treatment of these teeth have been limited. OBJECTIVES: This study was conducted to answer the following questions: in patients with nontraumatic pulpitis associated with no or nonspontaneous pain in permanent teeth, (i) is direct pulp capping or pulpotomy (partial/full) as effective as selective or stepwise caries removal [Population/participants, Intervention(s), Comparator(s)/control, Outcome(s) (PICO) 1], (ii) is pulpotomy (partial/full) as effective as direct pulp capping (PICO 2) and (iii) is pulpotomy (partial/full) as effective as a pulpectomy (PICO 3), in terms of a combination of patient and clinical reported outcomes, with 'tooth survival' as the most critical outcome? METHODS: A literature search was conducted using Clarivate Analytics' Web of Science, Scopus, PubMed and Cochrane Central Register of Controlled Trials from inception to November 3rd 2021. Grey literature and contents of the major subject journals were examined. Eligibility criteria followed the PICO questions. Two independent reviewers performed study selection, data extraction and appraisal; disagreements were resolved by a third reviewer. The risk of bias was assessed by the revised Cochrane risk-of-bias tool for randomized trials. RESULTS: Three randomized clinical trials (RCTs) were included in the review. No study fulfilled the criteria to answer PICO 1. There were no significant differences in the reported outcomes between investigated treatments in all included RCTs. None of the included studies reported the most critical outcome 'tooth survival'. A high loss of patients during the follow-up period was observed. DISCUSSION: Although a few studies fulfilled strict eligible criteria, the results of this systematic review clearly highlight a paucity of available evidence. At the present time, clinical decisions cannot be substantiated by direct comparative trials. CONCLUSIONS: Based on limited evidence, this systematic review discovered no significant differences in effectiveness between compared vital pulp treatments in managing nontraumatic pulpitis associated with no or nonspontaneous pain. Further high-quality RCTs are necessary to investigate the effectiveness of direct pulp capping or pulpotomy (partial/full) compared to selective or stepwise caries removal. REGISTRATION: PROSPERO database (CRD42021259742).

Factors that influence the outcome of pulpotomy in permanent teeth.

The promotion of minimally invasive treatments focussed on the maintenance of pulp vitality has become a priority area in Endodontics. These vital pulp treatments (VPT) include partial and full pulpotomy, during which diseased coronal pulp tissue is removed prior to placement of a capping biomaterial and restoration. Traditionally, pulpotomies were confined to the treatment of carious primary and traumatized permanent teeth. However, these treatments have now been proposed as definitive solutions for cariously exposed permanent teeth with mild symptoms or even symptoms indicative of irreversible disease. Until recently, it was recommended that carious exposure of mature permanent teeth be managed by root canal treatment. The promotion of pulpotomy as an alternative treatment has opened up a wave of laboratory and clinical research aimed at improving therapies or evaluating clinical outcomes. In modern evidence-based endodontics, it is imperative that the outcomes of both partial and full pulpotomy are considered and important prognostic factors identified, so that improvements can be made to aid clinical decision-making and to direct new research. In this narrative review, the outcomes of partial and full pulpotomy are discussed, before analysis of patient, intraoperative and postoperative factors that influence the outcome of the pulpotomy procedure. The review highlights that although partial and full pulpotomy for the treatment of even pulpal disease are highly successful procedures, this is based on low-quality evidence with a lack of prospective, comparative trials investigating potential prognostic factors. Based on current evidence, it appears that age, gender, tooth type, root development and intraoperative pulpal haemorrhage do not impact significantly on pulpotomy outcome, whilst others such as caries depth, inflammatory status of the pulp, capping material, level of inflammatory pulpal-biomarkers and the final restoration integrity do. Other factors, including the influence of exposure type, periodontal condition, pulpal lavage, magnification, operator experience, isolation of the operating field and type of pulpotomy, require further experimental investigation before definitive conclusions can be made relating to the success of the pulpotomy procedure. Finally, there is not only a need for future well-designed prospective research addressing these issues but also a widening of our understanding of outcome to include patient-reported as well as clinician-reported outcomes.

Inflammatory response and odontogenic differentiation of inflamed dental pulp treated with different pulp capping materials: An in vivo study.

AIM: Previous studies have evaluated the pulpal responses to calcium silicate cements (CSCs) on normal dental pulp, but investigations on the effects of CSCs on inflamed pulp are limited. This study aimed to test the inflammatory response and odontogenic differentiation of inflamed rat dental pulp after direct pulp capping with CSCs. METHODOLOGY: Wistar rat molars pulps were exposed for 48 h to induce inflammation and then capped with ProRoot MTA (Dentsply), Biodentine (Septodont), RetroMTA (Bio MTA) and Dycal (Dentsply Caulk). The degree of pulpal inflammation and hard tissue formation was evaluated by histological analysis. Immunofluorescence staining for interleukin (IL)-6, osteocalcin (OCN) and runt-related transcription factor 2 (RUNX2) was also performed. RESULTS: After 4 weeks, complete recovery from inflammation was evident in 22%, 37.5%, 10% and none of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. Heavy hard tissue deposition as a continuous hard tissue bridge was observed in 77.8%, 75%, 70% and 60% of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. IL-6, OCN and RUNX2 were detected in all materials, mainly adjacent to areas of inflammation and reparative dentine formation. At one, two and 4 weeks, significant differences were not observed between the inflammation and hard tissue formation scores of the four material groups (p > .05). CONCLUSIONS: In this study, pulpal inflammation was still present in most specimens at 4 weeks after pulp capping and a significant number of samples showed incomplete and discontinuous dentine bridge formation. The results of this study suggest that initial inflammatory conditions of the pulp may risk the prognosis of teeth treated with CSCs.

A comparative histological study of the effect of TheraCal LC and biodentine on direct pulp capping in rabbits: an experimental study.

OBJECTIVES: This study histologically compared the effect of TheraCal LC and biodentine on direct pulp capping using a rabbit model. MATERIALS AND METHODS: A direct pulp capping procedure was performed on 40 mandibular central incisors of 20 healthy, male New Zealand white rabbits. TheraCal LC and biodentine were applied to exposed pulp and 10 randomly selected rabbits were euthanized after the first and second week. Incisors were extracted and prepared for histological processing and examination to check the dentine bridge thickness, continuity, and extent of pulp inflammation. A blinded data analysis was performed, and groups were compared using a Wilcoxon signed-rank test while changes across time within each group were assessed using the Mann-Whitney U test. RESULTS: When comparing the dentine bridge thickness, biodentine showed a significantly thicker dentine bridge in the first and second week (mean 28.16 µm, 33.66 µm), while TheraCal LC showed a dentine bridge in the second week only (mean 15.93 µm). Regarding dentine bridge continuity, biodentine showed a significantly better dentine bridge in the first week. Additionally, there was no difference in the second week. Furthermore, there was no statistically significant difference between each of the materials regarding the extent of inflammation. CONCLUSIONS: Biodentine in vivo showed better results concerning thickness and continuity of the dentine bridge after direct pulp capping in rabbit incisors. Both biodentine and TheraCal LC had a similar inflammatory effect on the pulp. CLINICAL RELEVANCE: Biodentine is more successful as a direct pulp capping material compared to TheraCal LC.

3D-printed microgels supplemented with dentin matrix molecules as a novel biomaterial for direct pulp capping.

OBJECTIVES: To develop a 3D-printed, microparticulate hydrogel supplemented with dentin matrix molecules (DMM) as a novel regenerative strategy for dental pulp capping. MATERIALS AND METHODS: Gelatin methacryloyl microgels (7% w/v) mixed with varying concentrations of DMM were printed using a digital light projection 3D printer and lyophilized for 2 days. The release profile of the DMM-loaded microgels was measured using a bicinchoninic acid assay. Next, dental pulp exposure defects were created in maxillary first molars of Wistar rats. The exposures were randomly capped with (1) inert material - negative control, (2) microgels, (3) microgels + DMM 500 µg/ml, (4) microgels + DMM 1000 µg/ml, (5) microgels + platelet-derived growth factor (PDGF 10 ng/ml), or (6) MTA (n = 15/group). After 4 weeks, animals were euthanized, and treated molars were harvested and then processed to evaluate hard tissue deposition, pulp tissue organization, and blood vessel density. RESULTS: All the specimens from groups treated with microgel + 500 µg/ml, microgel + 1000 µg/ml, microgel + PDGF, and MTA showed the formation of organized pulp tissue, tertiary dentin, newly formed tubular and atubular dentin, and new blood vessel formation. Dentin bridge formation was greater and pulp necrosis was less in the microgel + DMM groups compared to MTA. CONCLUSIONS: The 3D-printed photocurable microgels doped with DMM exhibited favorable cellular and inflammatory pulp responses, and significantly more tertiary dentin deposition. CLINICAL RELEVANCE: 3D-printed microgel with DMM is a promising biomaterial for dentin and dental pulp regeneration in pulp capping procedures.

Multivariate prognostic analysis of direct pulp capping using a bioceramic material in mature permanent teeth with carious pulp exposure: a retrospective cohort study.

OBJECTIVES: On the basis of a large sample size and a long follow-up period, the objectives of this study were to evaluate the outcomes of direct pulp capping (DPC) in mature permanent teeth with carious pulp exposure using a kind of bioaggregate putty (BP) which commercially named iRoot BP Plus (Innovative Bioceramix, Inc., Vancouver, Canada) and to analyze the potential prognostic factors. MATERIALS AND METHODS: The design of this research was retrospective regarding treatment procedures and prospective regarding the assessment of outcomes. The preoperative diagnosis of the teeth was either normal pulp or reversible pulpitis. Results were assessed based on clinical and radiographic examinations with at least 12 months of follow-up after DPC. No symptoms or signs, a positive response to electric pulp testing, a normal response to cold pulp testing and radiographs showing no abnormalities were considered to indicate success. Kaplan-Meier survival analysis was used to calculate the cumulative survival of teeth after DPC. Univariate and multivariate Cox proportional hazard regressions were used to analyze potential prognostic factors. RESULTS: Three hundred thirty-four patients, including a total of 354 teeth, were available for the final clinical examination. The follow-up period ranged from 12 to 85 months, with an average of 27.0 ± 0.8 months. The total success rate was 85% (302/354), and the cumulative survival rates at 1, 2, 3, 4, and 5 years were 92%, 87%, 83%, 76%, and 72%, respectively. Univariate analysis indicated a significantly increased risk of failure in patients aged above 40 years and those treated by resident operators (P ≤ 0.01), with hazard ratios of 2.18 and 2.27, respectively. CONCLUSIONS: Under appropriate indication selection and treatment procedures, long-term success is possible in mature permanent teeth with carious pulp exposure by DPC using iRoot BP Plus. Patient age and operator experience are potential prognostic factors. CLINICAL RELEVANCE: Clinical data on iRoot BP Plus as a pulp capping medicament in mature permanent teeth with carious pulp exposure is lacking. This study indicated the efficacy of BP in DPC. Younger patient and sophisticated operator are beneficial for the outcome of DPC.

Biodegradation of an injectable treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration.

BACKGROUND: A novel injectable mixture termed treated dentin matrix hydrogel (TDMH) has been introduced for restoring dentin defect in DPC. However, no study evaluated its physiological biodegradation. Therefore, the present study aimed to assess scaffold homogeneity, mechanical properties and biodegradability in vitro and in vivo and the regenerated dentin induced by TDMH as a novel pulp capping agent in human permanent teeth. METHODS: Three TDMH discs were weighted, and dry/wet ratios were calculated in four slices from each disc to evaluate homogeneity. Hydrogel discs were also analyzed in triplicate to measure the compressive strength using a universal testing machine. The in vitro degradation behavior of hydrogel in PBS at 37 °C for 2 months was also investigated by monitoring the percent weight change. Moreover, 20 intact fully erupted premolars were included for assessment of TDMH in vivo biodegradation when used as a novel injectable pulp capping agent. The capped teeth were divided into four equal groups according to extraction interval after 2-, 8-, 12- and 16-weeks, stained with hematoxylin-eosin for histological and histomorphometric evaluation. Statistical analysis was performed using F test (ANOVA) and post hoc test (p = 0.05). RESULTS: No statistical differences among hydrogel slices were detected with (p = 0.192) according to homogeneity. TDMH compression modulus was (30.45 ± 1.11 kPa). Hydrogel retained its shape well up to 4 weeks and after 8 weeks completely degraded. Histological analysis after 16 weeks showed a significant reduction in TDMH area and a simultaneous significant increase in the new dentin area. The mean values of TDMH were 58.8% ± 5.9 and 9.8% ± 3.3 at 2 and 16 weeks, while the new dentin occupied 9.5% ± 2.8 at 2 weeks and 82.9% ± 3.8 at 16 weeks. CONCLUSIONS: TDMH was homogenous and exhibited significant stability and almost completely recovered after excessive compression. TDMH generally maintained their bulk geometry throughout 7 weeks. The in vivo response to TDMH was characterized by extensive degradation of the hydrogel and dentin matrix particles and abundant formation of new dentin. The degradation rate of TDMH matched the rate of new dentin formation. TRIAL REGISTRATION: PACTR201901866476410: 30/1/2019.

Marginal adaptation, physicochemical and rheological properties of treated dentin matrix hydrogel as a novel injectable pulp capping material for dentin regeneration.

BACKGROUND: Treated dentin matrix hydrogel (TDMH) has been introduced as a novel injectable direct pulp capping material. In this regard, this study aimed to evaluate its marginal adaptation, physicochemical and rheological properties for the development of clinically feasible TDMH. METHODS: TDMH was applied to the pulp floor of prepared Class I cavities (n = 5), marginal adaptation was assessed by SEM at 1000 X magnification to detect gap between dentin and filling material. Five syringes were filled with TDMH and placed between the compression plates of a universal testing machine to evaluate injectability and gelation time was also evaluated by test vial inverting method. The microstructures of lyophilized TDMH were observed by SEM. Moreover, TDMH discs (n = 5) were prepared and the water uptake (%) was determined based on the equilibrium swelling theory state of hydrogels. Its solubility was measured after one week by the ISO standard method. Rheological behaviours of TDMH (n = 5) were analysed with a rotational rheometer by computing their complex shear modulus G* and their associated storage modulus (G') and loss modulus (G''). Statistical analysis was performed using F test (ANOVA) with repeated measures and Post Hoc Test (p = 0.05). RESULTS: TDMH presented an overall 92.20 ± 2.95% of continuous margins. It exhibited gelation during the first minute, and injectability mean was 66 ± 0.36%. TDMH showed a highly porous structure, and the pores were interconnected with an average diameter about 5.09 ± 3.17 µm. Swelling equilibrium gradually reached at 6 days up to 377%. The prepared hydrogels and maintained their shape after absorbing over three times their original weight of water. TDMH fulfilled the requirements of ISO 6876, demonstrating a weight loss of 1.98 ± 0.09% and linear viscoelastic behaviour with G` 479.2 ± 12.7 and G`` 230.8 ± 13.8. CONCLUSIONS: TDMH provided good marginal adaptation, appropriate physicochemical and viscoelastic properties support its use as a novel direct pulp capping material in future clinical applications.

Identification of key module and hub genes in pulpitis using weighted gene co-expression network analysis.

BACKGROUND: Pulpitis is a common disease mainly caused by bacteria. Conventional approaches of diagnosing the state of dental pulp are mainly based on clinical symptoms, thereby harbor deficiencies. The accurate and rapid diagnosis of pulpitis is important for choosing the suitable therapy. The study aimed to identify pulpits related key genes by integrating micro-array data analysis and systems biology network-based methods such as weighted gene co-expression network analysis (WGCNA). METHODS: The micro-array data of 13 inflamed pulp and 11 normal pulp were acquired from Gene Expression Omnibus (GEO). WGCNA was utilized to establish a genetic network and categorize genes into diverse modules. Hub genes in the most associated module to pulpitis were screened out using high module group members (MM) methods. Pulpitis model in rat was constructed and iRoot BP plus was applied to cap pulp. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was used for validation of hub genes. RESULTS: WGCNA was established and genes were categorized into 22 modules. The darkgrey module had the highest correlation with pulpitis among them. A total of 5 hub genes (HMOX1, LOX, ACTG1, STAT3, GNB5) were identified. RT-qPCR proved the differences in expression levels of HMOX1, LOX, ACTG1, STAT3, GNB5 in inflamed dental pulp. Pulp capping reversed the expression level of HMOX1, LOX, ACTG1. CONCLUSION: The study was the first to produce a holistic view of pulpitis, screen out and validate hub genes involved in pulpitis using WGCNA method. Pulp capping using iRoot BP plus could reverse partial hub genes.

Evaluation of the reasons for preferring root canal treatment in mature permanent teeth potentially indicated for pulp preservation: a clinical case/photo-based questionnaire study.

BACKGROUND: With advances in pulp preservation procedures (PPP), indications for PPP extend to exposed pulp with symptoms in teeth with carious lesions. Scenario/text-based questionnaire studies report a high preference for PPP for exposed pulp with no pulpal symptoms. However, negative perceptions towards PPP for exposed pulp in carious teeth are prevalent among dentists. Identifying the differences in PPP preference rates in questionnaire studies and actual clinical situations is necessary to determine the current status of PPP. In this study, a clinical case/photo-based design was devised to overcome the limitations of scenario/text-based questionnaires. This study aimed to evaluate the reasons dentists prefer root canal treatment (RCT) in cases where PPP is potentially indicated. METHODS: A questionnaire containing three cases of PPP with successful results was administered to dentists. The cases were selected to elicit comprehensive responses from the dentists. Clinical photos of the pulp exposure sites were presented to dentists without describing the tooth conditions, including the extent of pulp exposure and tooth decay, pulpal surface conditions, or restorability. The questions were focused on the reasons for selecting RCT in cases where was practiced. Questionnaire data were collected using Google e-forms. Chi-squared and Fisher's exact test (P < 0.05) were used for statistical analyses. RESULTS: Pulpal diagnosis was not a dominant factor in treatment decision-making for pulp exposure during caries removal. Reasons for selecting RCT where PPP was potentially indicated included the event of pulp exposure itself and the dentists' desire to prevent post-PPP symptoms. Apart from symptomatic pulp, the tooth conditions influenced the establishment of pulpal diagnosis and selection of treatment modality. Moreover, the tooth condition and dentists' desire for good patient prognosis influenced the negative perceptions towards PPP. CONCLUSIONS: Unfavourable tooth conditions, in association with a desire for preventing post-PPP symptoms, prevent dentists from attempting PPP for pulp exposed during caries removal with no/slight symptoms. Improving negative perceptions towards PPP through accumulation of data on the high success rates of PPP is a prerequisite for achieving widespread application of PPP.

Impact of corticosteroid administration on the response of exposed dental pulp to capping with bioactive cements-experimental study on mongrel dogs.

BACKGROUND: Corticosteroids are commonly used as a treatment for a variety of pathological conditions, however, systemic corticosteroid administration has adverse effects including impaired immune response and wound healing. Such complications may affect pulp healing after direct pulp capping. The current study evaluated the influence of corticosteroids on the healing ability of exposed dogs' dental pulps after direct pulp capping (DPC) with bioactive materials. METHODS: Ten healthy male dogs were assigned randomly into two groups, 5 dogs each: group I represent the control group which did not receive any medication, and group II was given corticosteroid for 45 days before DPC and till the dogs were euthanized (n = 75 teeth for each group). Following mechanical exposure, the pulps were randomly capped with either Ca(OH)2, MTA, or Biodentine. The pulpal tissues' reaction to the capping materials was evaluated 65 days postoperatively according to the following parameters: calcific bridge formation, pulpal inflammation, pulp necrosis, and bacterial infiltration. RESULTS: The corticosteroid-treated group revealed no significant difference compared to the control group concerning the pulp healing response (P > 0.05). Both Biodentine and MTA-treated specimens revealed significant differences with Ca(OH)2-treated specimens (P < 0.05) which displayed a superior positive effect of both MTA and Biodentine to Ca(OH)2 regarding all the parameters. CONCLUSIONS: Direct pulp capping technique whenever indicated in subjects treated with corticosteroid immunosuppressive drugs like prednisone performed well in aseptic conditions especially when capped with bioactive materials.