Diversity and evolution of nitric oxide reduction in bacteria and archaea.

Nitrous oxide is a potent greenhouse gas whose production is catalyzed by nitric oxide reductase (NOR) members of the heme-copper oxidoreductase (HCO) enzyme superfamily. We identified several previously uncharacterized HCO families, four of which (eNOR, sNOR, gNOR, and nNOR) appear to perform NO reduction. These families have novel active-site structures and several have conserved proton channels, suggesting that they might be able to couple NO reduction to energy conservation. We isolated and biochemically characterized a member of the eNOR family from the bacterium Rhodothermus marinus and found that it performs NO reduction. These recently identified NORs exhibited broad phylogenetic and environmental distributions, greatly expanding the diversity of microbes in nature capable of NO reduction. Phylogenetic analyses further demonstrated that NORs evolved multiple times independently from oxygen reductases, supporting the view that complete denitrification evolved after aerobic respiration.

Structural basis for the recognition of α-1,6-branched α-glucan by GH13_47 α-amylase from Rhodothermus marinus.

Glycoside hydrolase (GH) family 13 is among the main families of enzymes acting on starch; recently, subfamily 47 of GH13 (GH13_47) has been established. The crystal structure and function of a GH13_47 enzyme from Bacteroides ovatus has only been reported to date. This enzyme has α-amylase activity, while the GH13_47 enzymes comprise approximately 800-900 amino acid residues which are almost double those of typical α-amylases. It is important to know how different the GH13_47 enzymes are from other α-amylases. Rhodothermus marinus JCM9785, a thermophilic bacterium, possesses a gene for the GH13_47 enzyme, which is designated here as RmGH13_47A. Its structure has been predicted to be composed of seven domains: N1, N2, N3, A, B, C, and D. We constructed a plasmid encoding Gly266-Glu886, which contains the N3, A, B, and C domains and expressed the protein in Escherichia coli. The enzyme hydrolyzed starch and pullulan by a neopullulanase-type action. Additionally, the enzyme acted on maltotetraose, and saccharides with α-1,6-glucosidic linkages were observed in the products. Following the replacement of the catalytic residue Asp563 with Ala, the crystal structure of the variant D563A in complex with the enzymatic products from maltotetraose was determined; as a result, electron density for an α-1,6-branched pentasaccharide was observed in the catalytic pocket, and Ile762 and Asp763 interacted with the branched chain of the pentasaccharide. These findings suggest that RmGH13_47A is an α-amylase that prefers α-1,6-branched parts of starch to produce oligosaccharides.

Genetically programmed chiral organoborane synthesis.

Recent advances in enzyme engineering and design have expanded nature's catalytic repertoire to functions that are new to biology. However, only a subset of these engineered enzymes can function in living systems. Finding enzymatic pathways that form chemical bonds that are not found in biology is particularly difficult in the cellular environment, as this depends on the discovery not only of new enzyme activities, but also of reagents that are both sufficiently reactive for the desired transformation and stable in vivo. Here we report the discovery, evolution and generalization of a fully genetically encoded platform for producing chiral organoboranes in bacteria. Escherichia coli cells harbouring wild-type cytochrome c from Rhodothermus marinus (Rma cyt c) were found to form carbon-boron bonds in the presence of borane-Lewis base complexes, through carbene insertion into boron-hydrogen bonds. Directed evolution of Rma cyt c in the bacterial catalyst provided access to 16 novel chiral organoboranes. The catalyst is suitable for gram-scale biosynthesis, providing up to 15,300 turnovers, a turnover frequency of 6,100 h-1, a 99:1 enantiomeric ratio and 100% chemoselectivity. The enantiopreference of the biocatalyst could also be tuned to provide either enantiomer of the organoborane products. Evolved in the context of whole-cell catalysts, the proteins were more active in the whole-cell system than in purified forms. This study establishes a DNA-encoded and readily engineered bacterial platform for borylation; engineering can be accomplished at a pace that rivals the development of chemical synthetic methods, with the ability to achieve turnovers that are two orders of magnitude (over 400-fold) greater than those of known chiral catalysts for the same class of transformation. This tunable method for manipulating boron in cells could expand the scope of boron chemistry in living systems.

Catalytic iron-carbene intermediate revealed in a cytochrome c carbene transferase.

Recently, heme proteins have been discovered and engineered by directed evolution to catalyze chemical transformations that are biochemically unprecedented. Many of these nonnatural enzyme-catalyzed reactions are assumed to proceed through a catalytic iron porphyrin carbene (IPC) intermediate, although this intermediate has never been observed in a protein. Using crystallographic, spectroscopic, and computational methods, we have captured and studied a catalytic IPC intermediate in the active site of an enzyme derived from thermostable Rhodothermus marinus (Rma) cytochrome c High-resolution crystal structures and computational methods reveal how directed evolution created an active site for carbene transfer in an electron transfer protein and how the laboratory-evolved enzyme achieves perfect carbene transfer stereoselectivity by holding the catalytic IPC in a single orientation. We also discovered that the IPC in Rma cytochrome c has a singlet ground electronic state and that the protein environment uses geometrical constraints and noncovalent interactions to influence different IPC electronic states. This information helps us to understand the impressive reactivity and selectivity of carbene transfer enzymes and offers insights that will guide and inspire future engineering efforts.

Heterologous expression, purification and biochemical characterization of a new endo-1,4-ß-xylanase from Rhodothermaceae bacterium RA.

Xylanases (EC 3.2.1.8) are essential enzymes due to their applications in various industries such as textile, animal feed, paper and pulp, and biofuel industries. Halo-thermophilic Rhodothermaceae bacterium RA was previously isolated from a hot spring in Malaysia. Genomic analysis revealed that this bacterium is likely to be a new genus of the family Rhodothermaceae. In this study, a xylanase gene (1140 bp) that encoded 379 amino acids from the bacterium was cloned and expressed in Escherichia coli BL21(DE3). Based on InterProScan, this enzyme XynRA1 contained a GH10 domain and a signal peptide sequence. XynRA1 shared low similarity with the currently known xylanases (the closest is 57.2-65.4% to Gemmatimonadetes spp.). The purified XynRA1 achieved maximum activity at pH 8 and 60 °C. The protein molecular weight was 43.1 kDa XynRA1 exhibited an activity half-life (t1/2) of 1 h at 60 °C and remained stable at 50 °C throughout the experiment. However, it was NaCl intolerant, and various types of salt reduced the activity. This enzyme effectively hydrolyzed xylan (beechwood, oat spelt, and Palmaria palmata) and xylodextrin (xylotriose, xylotetraose, xylopentaose, and xylohexaose) to produce predominantly xylobiose. This xylanase is the first functionally characterized enzyme from the bacterium, and this work broadens the knowledge of GH10 xylanases.

Expression and characterization of an extremely thermophilic 1,4-α-glucan branching enzyme from Rhodothermus obamensis STB05.

A gene encoding 1,4-α-glucan branching enzyme (GBE, EC 2.4.1.18) from the extremely thermophilic bacterium Rhodothermus obamensis STB05 was successfully cloned and expressed in Escherichia coli. Extracellular expression of the recombinant enzyme (R.o-GBE) was achieved with a yield of 1080 mg/L. Then it was purified and further characterized biochemically. R.o-GBE was optimally active at pH 7.0 and 65 °C. It remained stable at temperatures up to 80 °C and had a half-life at 85 °C of approximately 31 min. Far-UV circular dichroism and intrinsic fluorescence analyses revealed that high temperatures reduced its activity by changing the secondary and tertiary structure of R.o-GBE. The enzyme had broad pH stability between pH 3.0 and 11.0 at 4 °C, and preferred weakly acidic conditions at high temperatures. None of the metal ions enhanced the activity of R.o-GBE, but Ca2+ may be required for its activity. Its specific activity with amylopectin was 6651 U/mg, which is much higher than that reported for other GBEs. Its excellent thermostability, broad pH stability, and high specific activity make R.o-GBE highly suitable for industrial applications.

Structural insights of RmXyn10A - A prebiotic-producing GH10 xylanase with a non-conserved aglycone binding region.

Hydrolysis of arabinoxylan (AX) by glycoside hydrolase family 10 (GH10) xylanases produces xylo- and arabinoxylo-oligosaccharides ((A)XOS) which have shown prebiotic effects. The thermostable GH10 xylanase RmXyn10A has shown great potential to produce (A)XOS. In this study, the structure of RmXyn10A was investigated, the catalytic module by homology modelling and site-directed mutagenesis and the arrangement of its five domains by small-angle X-ray scattering (SAXS). Substrate specificity was explored in silico by manual docking and molecular dynamic simulations. It has been shown in the literature that the glycone subsites of GH10 xylanases are well conserved and our results suggest that RmXyn10A is no exception. The aglycone subsites are less investigated, and the modelled structure of RmXyn10A suggests that loop ß6α6 in the aglycone part of the active site contains a non-conserved α-helix, which blocks the otherwise conserved space of subsite +2. This structural feature has only been observed for one other GH10 xylanase. In RmXyn10A, docking revealed two alternative binding regions, one on either side of the α-helix. However, only one was able to accommodate arabinose-substitutions and the mutation study suggests that the same region is responsible for binding XOS. Several non-conserved structural features are most likely to be responsible for providing affinity for arabinose-substitutions in subsites +1 and +2. The SAXS rigid model of the modular arrangement of RmXyn10A displays the catalytic module close to the cell-anchoring domain while the carbohydrate binding modules are further away, likely explaining the observed lack of contribution of the CBMs to activity.

YcfDRM is a thermophilic oxygen-dependent ribosomal protein uL16 oxygenase.

YcfD from Escherichia coli is a homologue of the human ribosomal oxygenases NO66 and MINA53, which catalyse histidyl-hydroxylation of the 60S subunit and affect cellular proliferation (Ge et al., Nat Chem Biol 12:960-962, 2012). Bioinformatic analysis identified a potential homologue of ycfD in the thermophilic bacterium Rhodothermus marinus (ycfDRM). We describe studies on the characterization of ycfDRM, which is a functional 2OG oxygenase catalysing (2S,3R)-hydroxylation of the ribosomal protein uL16 at R82, and which is active at significantly higher temperatures than previously reported for any other 2OG oxygenase. Recombinant ycfDRM manifests high thermostability (Tm 84 °C) and activity at higher temperatures (Topt 55 °C) than ycfDEC (Tm 50.6 °C, Topt 40 °C). Mass spectrometric studies on purified R. marinus ribosomal proteins demonstrate a temperature-dependent variation in uL16 hydroxylation. Kinetic studies of oxygen dependence suggest that dioxygen availability can be a limiting factor for ycfDRM catalysis at high temperatures, consistent with incomplete uL16 hydroxylation observed in R. marinus cells. Overall, the results that extend the known range of ribosomal hydroxylation, reveal the potential for ycfD-catalysed hydroxylation to be regulated by temperature/dioxygen availability, and that thermophilic 2OG oxygenases are of interest from a biocatalytic perspective.

Large-scale production of a thermostable Rhodothermus marinus cellulase by heterologous secretion from Streptomyces lividans.

BACKGROUND: The gene encoding a thermostable cellulase of family 12 was previously isolated from a Rhodothermus marinus through functional screening. CelA is a protein of 260 aminoacyl residues with a 28-residue amino-terminal signal peptide. Mature CelA was poorly synthesized in some Escherichia coli strains and not at all in others. Here we present an alternative approach for its heterologous production as a secreted polypeptide in Streptomyces. RESULTS: CelA was successfully over-expressed as a secreted polypeptide in Streptomyces lividans TK24. To this end, CelA was fused C-terminally to the secretory signal peptide of the subtilisin inhibitor protein (Sianidis et al. in J Biotechnol. 121: 498-507, 2006) from Streptomyces venezuelae and a new cloning strategy developed. Optimal growth media and conditions that stall biomass production promote excessive CelA secretion. Under optimal growth conditions in nutrient broth medium, significant amounts of mature CelA (50-90 mg/L or 100-120 mg/g of dry cell weight) are secreted in the spent growth media after 7 days. A protocol to rapidly purify CelA to homogeneity from culture supernatants was developed and specific anti-sera raised against it. Biophysical, biochemical and immmuno-detection analyses indicate that the enzyme is intact, stable and fully functional. CelA is the most thermostable heterologous polypeptide shown to be secreted from S. lividans. CONCLUSION: This study further validates and extends the use of the S. lividans platform for production of heterologous enzymes of industrial importance and extends it to active thermostable enzymes. This study contributes to developing a platform for poly-omics analysis of protein secretion in S. lividans.

Functional characterization of the UDP-xylose biosynthesis pathway in Rhodothermus marinus.

UDP-glucuronic acid dehydrogenase (UGD) and UDP-xylose synthase (UXS) are the two enzymes responsible for the biosynthesis of UDP-xylose from UDP-glucose. Several UGDs from bacterial sources, which oxidize UDP-glucose to glucuronic acid, have been found and functionally characterized whereas only few reports on bacterial UXS isoforms exist. Rhodothermus marinus, a halothermophilic bacterium commonly found in hot springs, proved to be a valuable source of carbohydrate active enzymes of biotechnological interest, such as xylanases, mannanases, and epimerases. However, no enzymes of R. marinus involved in the biosynthesis or modification of nucleotide sugars have been reported yet. Herein, we describe the cloning and characterization of two putative UGD (RmUGD1 and RmUGD2) and one UXS (RmUXS) isoform from this organism. All three enzymes could be expressed in recombinant form and purified to near homogeneity. UPLC- and NMR-based activity tests showed that RmUGD1 and RmUXS are indeed active enzymes, whereas no enzymatic activity could be detected by RmUGD2. Both RmUGD1 and RmUXS showed a temperature optimum of 60 °C, with almost no loss of activity after 1 h exposure at 70 °C. No metal ions were required for enzymatic activities. Zn(2+) ions strongly inhibited both enzymes. RmUGD1 showed higher salt tolerance and had a higher pH optimum than RmUXS. Furthermore, RmUGD1 was inhibited by UDP-xylose at higher concentrations. By coupling recombinant RmUXS and RmUGD1, UDP-xylose could be successfully synthesized directly from UDP-glucose. The high activity of the herein described enzymes make RmUGD1 and RmUXS the first thermo-tolerant biocatalysts for the synthesis of UDP-glucuronic acid and UDP-xylose.

Dye-linked D-amino acid dehydrogenase from the thermophilic bacterium Rhodothermus marinus JCM9785: characteristics and role in trans-4-hydroxy-L-proline catabolism.

A gene from the thermophilic Gram-negative bacterium Rhodothermus marinus JCM9785, encoding a dye-linked D-amino acid dehydrogenase homologue, was overexpressed in Escherichia coli, and its product was purified and characterized. The expressed enzyme was a highly thermostable dye-linked D-amino acid dehydrogenase that retained more than 80% of its activity after incubation for 10 min at up to 70 °C. When enzyme-catalyzed dehydrogenation of several D-amino acids was carried out using 2,6-dichloroindophenol as the electron acceptor, D-phenylalanine was the most preferable substrate among the D-amino acids tested. Immediately upstream of the dye-linked D-amino acid dehydrogenase gene (dadh) was a gene encoding a 4-hydroxyproline 2-epimerase homologue (hypE). That gene was successfully expressed in E. coli, and the gene product exhibited strong 4-hydroxyproline 2-epimerase activity. Reverse transcription PCR and quantitative real-time PCR showed that the six genes containing the dadh and hypE genes were arranged in an operon and were required for catabolism of trans-4-hydroxy-L-proline in R. marinus. This is the first description of a dye-linked D-amino acid dehydrogenase (Dye-DADH) with broad substrate specificity involved in trans-4-hydroxy-L-proline catabolism.

Generation of targeted deletions in the genome of Rhodothermus marinus.

The aim of this work was to develop an approach for chromosomal engineering of the thermophile Rhodothermus marinus. A selection strategy for R. marinus had previously been developed; this strategy was based on complementing a restriction-negative trpB strain with the R. marinus trpB gene. The current work identified an additional selective marker, purA, which encodes adenylosuccinate synthase and confers adenine prototrophy. In a two-step procedure, the available Trp(+) selection was used during the deletion of purA from the R. marinus chromosome. The alternative Ade(+) selection was in turn used while deleting the endogenous trpB gene. Since both deletions are unmarked, the purA and trpB markers may be reused. Through the double deletant SB-62 (ΔtrpB ΔpurA), the difficulties that are associated with spontaneous revertants and unintended chromosomal integration of marker-containing molecules are circumvented. The selection efficiency in R. marinus strain SB-62 (ΔtrpB ΔpurA) was demonstrated by targeting putative carotenoid biosynthesis genes, crtBI, using a linear molecule containing a marked deletion with 717 and 810 bp of 5' and 3' homologous sequences, respectively. The resulting Trp(+) transformants were colorless rather than orange-red. The correct replacement of an internal crtBI fragment with the trpB marker was confirmed by Southern hybridization analysis of the transformants. Thus, it appears that target genes in the R. marinus chromosome can be readily replaced with linear molecules in a single step by double-crossover recombination.

Fusion of a family 9 cellulose-binding module improves catalytic potential of Clostridium thermocellum cellodextrin phosphorylase on insoluble cellulose.

Clostridium thermocellum cellodextrin phosphorylase (CtCDP), a single-module protein without an apparent carbohydrate-binding module, has reported activities on soluble cellodextrin with a degree of polymerization (DP) from two to five. In this study, CtCDP was first discovered to have weak activities on weakly water-soluble celloheptaose and insoluble regenerated amorphous cellulose (RAC). To enhance its activity on solid cellulosic materials, four cellulose binding modules, e.g., CBM3 (type A) from C. thermocellum CbhA, CBM4-2 (type B) from Rhodothermus marinus Xyn10A, CBM6 (type B) from Cellvibrio mixtus Cel5B, and CBM9-2 (type C) from Thermotoga maritima Xyn10A, were fused to the C terminus of CtCDP. Fusion of any selected CBM with CtCDP did not influence its kinetic parameters on cellobiose but affected the binding and catalytic properties on celloheptaose and RAC differently. Among them, addition of CBM9 to CtCDP resulted in a 2.7-fold increase of catalytic efficiency for degrading celloheptaose. CtCDP-CBM9 exhibited enhanced specific activities over 20% on the short-chain RAC (DP = 14) and more than 50% on the long-chain RAC (DP = 164). The chimeric protein CtCDP-CBM9 would be the first step to construct a cellulose phosphorylase for in vitro hydrogen production from cellulose by synthetic pathway biotransformation (SyPaB).

Purification and Amplification of DNA from Cellulolytic Bacteria: Application for Biogas Production from Crop Residues.

Polymerase chain reaction (PCR) is a popular molecular tool for detection of bacteria. PCR allows millions of copies of a target segment of DNA to be produced. The DNA is extracted from overnight grown cultures of pure bacterial isolates using either the organo-solvent method or a commercial DNA extraction kit. The quality and purity of the DNA is determined by performing gel electrophoresis on 0.8% agarose gel. The DNA is amplified by performing PCR assay. Bands of approximately 1.5 kb in size are obtained from the amplified products of DNA. The PCR products run on 1.5% agarose gel are visualized with UV light and imaged by gel documentation system. This chapter outlines the protocol for isolation and amplification of DNA from cellulolytic bacteria. Cellulolytic bacteria are considered a potential source of cellulases for pretreatment of crop residues during biogas production. PCR is considered a very powerful, sensitive, specific, fast, and reliable tool in molecular detection and diagnostics.

Rhodothermus profundi sp. nov., a thermophilic bacterium isolated from a deep-sea hydrothermal vent in the Pacific Ocean.

Nine thermophilic strains of aerobic, non-sporulating, heterotrophic bacteria were isolated after enrichment of chimney material sampled from a deep-sea hydrothermal field at a depth of 2634m on the East-Pacific Rise (1 °N). The bacteria stained Gram-negative. They were rod-shaped and measured approximately 0.5µm in width and 1.5-3.5µm in length. They grew at 55-80°C, pH 6-8 and 1-6 % NaCl. Optimal growth was observed at 70-75°C, pH7.0 and 1-3 % NaCl. The organisms were identified as members of the genus Rhodothermus, having a 16S rRNA gene similarity of 98.1 % with Rhodothermus marinus DSM 4252(T). The novel isolates differed morphologically, physiologically and chemotaxonomically from R. marinus, e.g. in lack of pigmentation, response to hydrostatic pressure, maximum growth temperature and DNA G+C content. DNA-DNA hybridization revealed a reassociation value of 37.2 % between strain PRI 2902(T) and R. marinus DSM 4252(T), which strongly suggested that they represent different species. Furthermore, AFLP fingerprinting separated the novel strains from R. marinus reference strains. It is therefore concluded that the strains described here should be classified as representatives of a novel species for which the name Rhodothermus profundi sp. nov. is proposed; the type strain is PRI 2902(T) (=DSM 22212(T) =JCM 15944(T)).

Characterization and diversity of the complete set of GH family 3 enzymes from Rhodothermus marinus DSM 4253.

The genome of Rhodothermus marinus DSM 4253 encodes six glycoside hydrolases (GH) classified under GH family 3 (GH3): RmBgl3A, RmBgl3B, RmBgl3C, RmXyl3A, RmXyl3B and RmNag3. The biochemical function, modelled 3D-structure, gene cluster and evolutionary relationships of each of these enzymes were studied. The six enzymes were clustered into three major evolutionary lineages of GH3: ß-N-acetyl-glucosaminidases, ß-1,4-glucosidases/ß-xylosidases and macrolide ß-glucosidases. The RmNag3 with additional ß-lactamase domain clustered with the deepest rooted GH3-lineage of ß-N-acetyl-glucosaminidases and was active on acetyl-chitooligosaccharides. RmBgl3B displayed ß-1,4-glucosidase activity and was the only representative of the lineage clustered with macrolide ß-glucosidases from Actinomycetes. The ß-xylosidases, RmXyl3A and RmXyl3B, and the ß-glucosidases RmBgl3A and RmBgl3C clustered within the major ß-glucosidases/ß-xylosidases evolutionary lineage. RmXyl3A and RmXyl3B showed ß-xylosidase activity with different specificities for para-nitrophenyl (pNP)-linked substrates and xylooligosaccharides. RmBgl3A displayed ß-1,4-glucosidase/ß-xylosidase activity while RmBgl3C was active on pNP-ß-Glc and ß-1,3-1,4-linked glucosyl disaccharides. Putative polysaccharide utilization gene clusters were also investigated for both R. marinus DSM 4253 and DSM 4252T (homolog strain). The analysis showed that in the homolog strain DSM 4252T Rmar_1080 (RmXyl3A) and Rmar_1081 (RmXyl3B) are parts of a putative polysaccharide utilization locus (PUL) for xylan utilization.

Replacement of the active surface of a thermophile protein by that of a homologous mesophile protein through structure-guided 'protein surface grafting'.

Using several tens of rationally-selected substitutions, insertions and deletions of predominantly non-contiguous residues, we have remodeled the solvent-exposed face of a beta sheet functioning as the substrate-binding and catalytically-active groove of a thermophile cellulase (Rhodothermus marinus Cel12A) to cause it to resemble, both in its structure and function, the equivalent groove of a mesophile homolog (Trichoderma reesei Cel12A). The engineered protein, a mesoactive-thermostable cellulase (MT Cel12A) displays the temperature of optimal function of its mesophile ancestor and the temperature of melting of its thermophile ancestor, suggesting that such 'grafting' of a mesophile-derived surface onto a thermophile-derived structural scaffold can potentially help generate novel enzymes that recombine structural and functional features of homologous proteins sourced from different domains of life.

Novel xylan-binding properties of an engineered family 4 carbohydrate-binding module.

Molecular engineering of ligand-binding proteins is commonly used for identification of variants that display novel specificities. Using this approach to introduce novel specificities into CBMs (carbohydrate-binding modules) has not been extensively explored. Here, we report the engineering of a CBM, CBM4-2 from the Rhodothermus marinus xylanase Xyn10A, and the identification of the X-2 variant. As compared with the wild-type protein, this engineered module displays higher specificity for the polysaccharide xylan, and a lower preference for binding xylo-oligomers rather than binding the natural decorated polysaccharide. The mode of binding of X-2 differs from other xylan-specific CBMs in that it only has one aromatic residue in the binding site that can make hydrophobic interactions with the sugar rings of the ligand. The evolution of CBM4-2 has thus generated a xylan-binding module with different binding properties to those displayed by CBMs available in Nature.

Structural basis for energy transduction by respiratory alternative complex III.

Electron transfer in respiratory chains generates the electrochemical potential that serves as energy source for the cell. Prokaryotes can use a wide range of electron donors and acceptors and may have alternative complexes performing the same catalytic reactions as the mitochondrial complexes. This is the case for the alternative complex III (ACIII), a quinol:cytochrome c/HiPIP oxidoreductase. In order to understand the catalytic mechanism of this respiratory enzyme, we determined the structure of ACIII from Rhodothermus marinus at 3.9 Å resolution by single-particle cryo-electron microscopy. ACIII presents a so-far unique structure, for which we establish the arrangement of the cofactors (four iron-sulfur clusters and six c-type hemes) and propose the location of the quinol-binding site and the presence of two putative proton pathways in the membrane. Altogether, this structure provides insights into a mechanism for energy transduction and introduces ACIII as a redox-driven proton pump.

Dimerisation and an increase in active site aromatic groups as adaptations to high temperatures: X-ray solution scattering and substrate-bound crystal structures of Rhodothermus marinus endoglucanase Cel12A.

Cellulose, a polysaccharide consisting of beta-1,4-linked glucose, is the major component of plant cell walls and consequently one of the most abundant biopolymers on earth. Carbohydrate polymers such as cellulose are molecules with vast diversity in structure and function, and a multiplicity of hydrolases operating in concert are required for depolymerisation. The bacterium Rhodothermus marinus, isolated from shallow water marine hot springs, produces a number of carbohydrate-degrading enzymes including a family 12 cellulase Cel12A. The structure of R.marinus Cel12A in the ligand-free form (at 1.54 angstroms) and structures of RmCel12A after crystals were soaked in cellopentaose for two different lengths of time, have been determined. The shorter soaked complex revealed the conformation of unhydrolysed cellotetraose, while cellopentaose had been degraded more completely during the longer soak. Comparison of these structures with those of mesophilic family 12 cellulases in complex with inhibitors and substrate revealed that RmCel12A has a more extensive aromatic network in the active site cleft which ejects products after hydrolysis. The substrate structure confirms that during hydrolysis by family 12 cellulases glucose does not pass through a (2,5)B conformation. Small-angle X-ray scattering analysis of RmCel12A showed that the enzyme forms a loosely associated antiparallel dimer in solution, which may target the enzyme to the antiparallel polymer strands in cellulose.