Antibacterial properties of marine algae incorporated polylactide acid membranes as an alternative to clinically applied different collagen membranes.

The reconstruction of bony defects in the alveolar crest poses challenges in dental practice. Guided tissue regeneration (GTR) and guided bone regeneration (GBR) procedures utilize barriers to promote bone regeneration and prevent epithelial growth. This study focuses on evaluating the antibacterial properties of marine algae-polylactic acid (PLA) composite membranes compared to commercially available collagen membranes. Marine algae (Corallina elongata, Galaxaura oblongata, Cystoseira compressa, Saragassum vulgare, and Stypopodium schimperi) were processed into powders and blended with PLA to fabricate composite membranes. Cytocompatibility assays using human periodontal ligament fibroblasts (n = 3) were performed to evaluate biocompatibility. Antibacterial effects were assessed through colony-forming units (CFU) and scanning electron microscopy (SEM) analysis of bacterial colonization on the membranes. The cytocompatibility assays demonstrated suitable biocompatibility of all marine algae-PLA composite membranes with human periodontal ligament fibroblasts. Antibacterial assessment revealed that Sargassum vulgare-PLA membranes exhibited the highest resistance to bacterial colonization, followed by Galaxaura oblongata-PLA and Cystoseira compressa-PLA membranes. SEM analysis confirmed these findings and revealed smooth surface textures for the marine algae-PLA membranes compared to the fibrous and porous structures of collagen membranes. Marine algae-PLA composite membranes show promising antibacterial properties and cytocompatibility for guided bone and tissue regeneration applications. Sargassum vulgare-PLA membranes demonstrated the highest resistance against bacterial colonization. These findings suggest that marine algae-PLA composite membranes could serve as effective biomaterials for infection control and tissue regeneration. Further in vivo validation and investigation of biodegradation properties are necessary to explore their clinical potential.

Analysis of Genes Related to Invadopodia Formation and CTTN in Oral Squamous Cell Carcinoma-A Systematic Gene Expression Analysis.

Successful treatment for any type of carcinoma largely depends on understanding the patterns of invasion and migration. For oral squamous cell carcinoma (OSCC), these processes are not entirely understood as of now. Invadopodia and podosomes, called invadosomes, play an important role in cancer cell invasion and migration. Previous research has established that cortactin (CTTN) is a major inducer of invadosome formation. However, less is known about the expression patterns of CTTN and other genes related to it or invadopodia formation in OSCC during tumor progression in particular. In this study, gene expression patterns of CTTN and various genes (n = 36) associated with invadopodia formation were analyzed to reveal relevant expression patterns and give a comprehensive overview of them. The genes were analyzed from a whole genome dataset of 83 OSCC samples relating to tumor size, grading, lymph node status, and UICC (Union for Internatioanl Cancer Control). The data revealed significant overexpression of 18 genes, most notably CTTN, SRC (SRC proto-onocogene, non-receptor tyrosine kinase), EGFR (epidermal growth factor receptor), SYK (spleen associated tyrosine kinase), WASL (WASP like actin nucleation promotion factor), and ARPC2 (arrestin beta 1) due to their significant correlation with further tumor parameters. This study is one of the first to summarize the expression patterns of CTTN and related genes in a complex group of OSCC samples.

In vivo biocompatibility evaluation of 3D-printed nickel-titanium fabricated by selective laser melting.

Nickel-titanium (NiTi) belongs to the group of shape-memory alloys (SMAs), which are characterized by flexibility and reversible deformability. Advanced techniques in 3D printing by selective laser-melting (SLM) process allow the manufacturing of complex patient-specific implants from SMAs. Osteosynthesis materials made of NiTi could be used for minimally invasive surgical approaches in oral- and maxillofacial surgery. However, the in vivo biocompatibility has not yet been fully investigated, especially in load-sharing and load-bearing implants. The aim of this study was to evaluate the in vivo biocompatibility of SLM-produced NiTi for intraosseous and subperiosteal applications. Test specimens were implanted into the frontonasal bone of ten miniature pigs. To assess peri-implant bone metabolism, fluorescent dye was administered after 2, 4, 6, 10, 12, and 14 weeks intraperitoneally. Specimens and the surrounding tissues were harvested after 8 and 16 weeks for histological analysis. While the NiTi implants presented a higher bone-to-implant contact ratio (BIC) after 8 than after 16 weeks (43.3 vs. 40.3%), the titanium implants had a significantly higher BIC after 16 weeks (33.6 vs. 67.7%). Histologically, no signs of peri-implant inflammation or foreign-body reaction were detectable. With respect to this preliminary study design, 3D-printed NiTi shows sufficient biocompatibility for intraosseous and subperiosteal implant placement.

Comparative Assessment of the Primary Stability of Straumann BLX Implant Design Using an In Vitro Sinus Lift-Simultaneous Implant Insertion Model.

Straumann BLX is a novel implant system that has been proclaimed to provide an ideal primary stability in all types of bone. In the current study, the primary stability of the Straumann BLX implant systems with Straumann tapered effect (TE) implants have been comparatively assessed in bovine ribs by using a simultaneous sinus elevation and implant insertion model. In the study group, BLX (4.0 × 12 mm), TE (4.1 × 12 mm), BLX (4.5 × 12 mm), and TE (4.8 × 12 mm) were placed in each bony window, which resembles the sinus maxillaris. As a control, BLX and TE implants with the same sizes were inserted into the proximal diaphysis of the bovine ribs. A total of 40 implant insertions were performed. Stability was measured with resonance frequency analysis. In the study group, 4.8-mm TE implants showed significantly higher values compared with 4.5-mm BLX implants (P = .116). However, 4.0-mm BLX implants in the control group showed higher stability compared with 4.0-mm-diameter TE (P = .014). The primary stability of the BLX implants in the control group was significantly higher compared with the experimental group in both widths (P= .018 for BLX 4.0 mm and P = .002 for BLX 4.5 mm, respectively). The use of the TE design with a wide diameter in simultaneous implant placement with sinus lift could present higher implant stability quotient values and might be a more appropriate option for implant recipient sites with poor bone volume and quality. However, the advantage of BLX design in standard implant insertion protocols could be of value.

Organic Bone Matrix Component Type I and V Collagen Are Not Destructed in Bisphosphonate-Associated Osteonecrosis of the Jaws.

Background and objectives: The investigation of the pathophysiology behind medication-related osteonecrosis (MRONJ) of the jaw mostly focuses on alterations in osteoclast and osteoblast cell activity, but changes in the organic and inorganic bone matrix have rarely been studied. The aim of this study was to investigate whether collagen, the main organic component of extracellular bone matrix, is destructed in osteonecrosis of the jaw secondary to antiresorptive medication. Material and methods: Bone samples of patients with MRONJ (n = 15, control group n = 3) were demineralized, and collagen fragments were separated from intact collagen pellets by ultrafiltration. The quantification of mature collagen cross-links hydroxylysylpyridinoline (HP) and lysylpyridinoline (LP) in pellets and ultrafiltrates was performed by high-performance liquid chromatography (HPLC). The detection of hydroxyproline (Hyp) was carried out using a spectrophotometric assay. In addition, collagen chains were analyzed by sodium dodecylsulfate-polyacrylamide gel (SDS-PAGE). Results: The results revealed significantly higher concentrations of HP, LP and Hyp in pellet samples. In addition, there were no significant differences between samples from MRONJ patients and those of the control group. These results were paralleled by SDS- PAGE. Conclusion: These findings suggest that MRONJ does not involve the destruction of type I and V collagen molecules, in contrast to previously reported destruction by osteoradionecrosis.

Six-year clinical outcomes of implant-supported acrylic vs. ceramic superstructures according to the All-on-4 treatment concept for the rehabilitation of the edentulous maxilla.

The aim of the current study was to document the long-term clinical results of the use of two prosthetic techniques for the rehabilitation of completely edentulous maxillae according to the "All-on-Four" concept: Fixed, screw-retained prosthesis mounted on a chrome-molybdenum framework with (1) metal-ceramic veneers and (2) Acrylic prosthesis with acrylic resin prosthetic teeth. A total of 34 patients were assigned to subgroups according to their own preference of the superstructure type (ceramics [n: 17] or acrylic resin [n: 17]). Prosthetic complications, marginal bone loss, plaque accumulation, bleeding on probing, bite force and oral-health-related quality of life were assessed over a period of 6 years. Marginal bone loss around implants of the ceramic group remained well within the limits for 'success', as defined by the 2007 Pisa consensus over the time (1.43 ± 0.35 mm). However, marginal bone loss was significantly more pronounced around the implants in the acrylic group (2.15 ± 0.30) and the difference between two groups was statistically significant (p: 0.00). Bleeding on probing and plaque accumulation showed also positive correlation with marginal bone loss. Both acrylic and ceramic suprastructures appeared to be equivalent after 6 years; however, ceramic suprastructures revealed superior clinical results in terms of bone loss and plaque accumulation. Current study determines the long-term clinical outcomes of different prosthetic management alternatives in All-on-Four and aids to increase dental professionals' ability to meet the patients' expectations.

Histological Aspects of a Novel Technique Used for the Management of Infections Secondary to Sinus Bone Grafting.

Recently, a technical note describing a promising method for the management of infections after sinus bone grafting by irrigating the corresponding area with hydrogen peroxide based solution with an aid of a drain has been published. The aim of this paper was to present the histological and radiological results of the above mentioned technique. A total of 17 patients who have presented with infections secondary to sinus bone grafting enrolled in the study. During implant placement, bone was collected from the originally grafted site with a trephine burr for radiological examination via micro-computed tomography and histological examination. According to the results of the current study, Bio-Oss acted as a scaffold, and mature fibrous bone formed trabeculae, which assembled to an interlinked trabecular structure. Average results obtained from the microradiography confirmed the higher percentage of Bio-Oss (27.21% ±â€Š3.31%) at the corresponding area; whereas the amount of newly formed bone was slightly lower (6.79% ±â€Š1.13%) As a conclusion, this simple and minimally invasive technique might be beneficial in avoiding removal of bone graft material and could help in rescuing the former laborious procedure.

A clinical study on the 6-year outcomes of immediately loaded three implants for completely edentulous mandibles: "the all-on-3 concept".

The objective of the current study was to demonstrate the 6-year clinical and radiological treatment outcomes of the technique performed by immediately loading of three implants (single straight in the mid-line and two tilted distal implants) for the management of total edentulous mandibles and introduce a simple decision matrix for selection of the most appropriate protocol in cases with insufficient length of the interforaminal area. Re-assessments were performed over a total observation period of 6 years after surgery via measurement of bone resorption around implants, bleeding on probing, plaque accumulation, periodontal probing depth, bite force measurements and oral health impact profile. A total of 29 patients (45% women and 55% men) with a mean age of 65 ± 6 years enrolled in the study. 14 patients received an acryl-based bridge as definitive prosthetic restoration and 15 patients received a ceramic-based restoration. Both during the immediate loading phase and during the 6-year follow-up, there was no implantation loss. Regardless of the implant position, all implants showed continuous bone loss over the observation time. The bone loss around dental implants during observation period was only maximum 1.0 ± 1 mm and it remained well within the limits for 'success' according to the 2007 Pisa consensus (< 2 mm). The plaque index showed no significant fluctuations between the implant positions and the individual examination times. The approach described herein might help the surgeon by avoiding unnecessary loss of bone strength, selecting implant sites, and establishing the biomechanical advantage of increased A-P spread for immediate function.

A 5-year prospective clinical trial on short implants (6 mm) for single tooth replacement in the posterior maxilla: immediate versus delayed loading.

The aim of this paper was to demonstrate the treatment outcomes following immediate functional loading concept of short implants inserted for single tooth replacement in the posterior maxilla. The study was performed on 63 patients who received short (6 mm) implants for single tooth replacement in the posterior maxilla. Forty-eight patients underwent immediate functional concept, whereas 15 of the implants were loaded 3 months after insertion. The patients were evaluated for up to 5 years after prosthesis completion. The endpoints included the evaluation of implant survival rate, crown length, bone resorption, plaque accumulation (PI), bleeding on probing (BOP), periodontal probing depth (PPD) and assessment of oral health impact profile (OHIP). At the end of the follow-up period of 5 years, three implants (6.3%) from the immediate loading group have failed during the observation period. Bone loss was significantly lower in the delayed loading group compared to the immediately loaded implants. At the end of the second year, BOP values were higher in the immediately loaded group. Throughout the observation period, PI values in the group with immediate loading were higher. PPD increased consistently and during the first 3 years in the immediate loading group. As a conclusion, short implants inserted for single tooth replacement at the posterior maxilla presented with satisfactory clinical outcomes in both immediate and delayed loading concepts. However, immediately loaded implants presented with an increased bone loss and higher BOP values. As assessed by the OHIP score, a subjective improvement was observed in both groups without significant differences.

A comparative study on 7-year results of "All-on-Four™" immediate-function concept for completely edentulous mandibles: metal-ceramic vs. bar-retained superstructures.

The study aims to document the clinical outcomes over a 7-year period of two techniques used for the rehabilitation of edentulous mandibles according to the "All-on-Four™" concept: (1) fixed complete-arch prostheses fabricated with metal-ceramic implant-supported fixed prosthesis with a titanium framework and all-ceramic crowns and (2) bar-retained implant-supported removable prosthesis with acrylic resin prosthetic teeth. The study was performed on 32 patients who received immediately loaded "All-on-Four™" fixed mandibular prostheses. (Fixed prostheses with ceramic superstructures, n:16; bar-retained removable acrylic prostheses, n:16). The patients were evaluated for up to 7 years after prosthesis completion. The endpoints included the evaluation of prosthodontic complications, bone resorption, plaque accumulation, bleeding on probing, periodontal probing depth and an oral health impact profile (OHIP). Bone loss remained under 1.2 mm in all of the implants, and no difference was observed between two groups. Plaque accumulation increased gradually in both groups, and the bar-retained acrylic-bearing implants showed significantly higher values during the first 5 years. Immediate improvement was assessed by the OHIP score in both groups. The observed bone loss and the subjective outcomes showed equivalent levels of clinical success for bar-retained and ceramic superstructures over a 7-year period. The higher level of plaque accumulation observed around implants with bar-retained superstructures requires that patients with acrylic superstructures be highly motivated to maintain their personal oral hygiene. Further studies are needed to clarify the occurrence of prosthodontic complications and assess their economic aspects.

Effects of degradable osteosynthesis plates of MgYREZr alloy on cell function of human osteoblasts, fibroblasts and osteosarcoma cells.

The aim was to evaluate the biocompatibility of osteosynthesis plates of the MgYREZr/WE43 alloy by using human cells in vitro. Eluates of degradable magnesium osteosynthesis plates as well as halved plates were used for incubation with human osteoblasts, fibroblasts and osteosarcoma cells. The cell viability was evaluated by using FDA/PI-Staining and LDH analysis. Cell proliferation was assessed by MTT, WST-Test and BrdU-ELISA. Scanning electron microscope was used for investigation of the cell adhesion. The number of devitalized cells in all treatment groups did not significantly deviate from the control group. According to MTT results, the number of metabolically active cells was not significantly affected by the addition of the eluates. The number of metabolically active cells was reduced by 24 to 38% compared to the control on incubation in direct contact with the osteosynthesis plates. The proliferation of the cells was inhibited by the addition of the eluates. While the eluate of the half-hour elution has only a very small effect, the 24 h eluate significantly inhibits proliferation by 23-25% compared to the control. The roughened surface of the magnesium osteosynthesis plate after incubation showed adherent cells. However, some areas of the plates were also free of adherent cells. WE43 based magnesium alloys showed favorable biocompatibility considering the viability of the cells evaluated; however, proliferation rates were reduced in a time dependent manner, especially in fibroblast group. This might be a potential clinical benefit of magnesium osteosynthesis plates and their superiority to titanium, thus the fibroblastic ingrowth might negatively influence the bone-plate contact.

Correlation between resonance frequency, insertion torque and bone-implant contact in self-cutting threaded implants.

The aim of this study was to evaluate the correlation between resonance frequency analysis (RFA) values and the histomorphometric bone-implant contact (BIC) immediately after insertion of the implant. Additionally, it was examined to define which extent peak insertion torque (PIT) was correlated with the latter measurements. 15 Xive® S plus root from dental implants were inserted in fresh porcine frontal bones. The insertion torque was measured with the Kavo Intrasurg 300 surgical unit. RFA connector was coupled to the implants and the mean value of 20 consecutive RFA measurements was calculated via Osstell® ISQ device. The implants were removed with the adjacent bone with a band saw. The blocks were processed for undecalcified histology. Two perpendicular longitudinal middle sections of the implant were made and stained with toluidine blue and the BIC was assessed by histomorphometry. The correlation coefficient (Spearman) between RFA and BIC was R = 0.579 (p = 0.026, F test). The correlation between PIT and BIC (0.33, p > 0.05) and PIT and RFA (0.153, p > 0.05) was not statistically significant. The present data confirmed a moderate and statistically positive correlation between RFA and BIC. No correlation between BIC and PIT and PIT and RFA was observed. Further studies considering different bone qualities would be beneficial in understanding the relation between RFA and BIC.

Macrophage colony-stimulating factor (M-CSF) in first trimester maternal serum: correlation with pathologic pregnancy outcome.

PURPOSE: To determine correlations between macrophage colony-stimulating factor (MCSF) levels in maternal blood during first trimester screening with respect to normal and pathological pregnancies. METHODS: This was a prospective single centre study. First trimester screening was performed according to FMF London certificates. Nuchal translucency, PAPP-A and free ß-HCG were obtained as well as M-CSF serum levels in maternal blood. Fetal karyotyping was achieved by chorionic villi sampling. RESULTS: 125 patients were enrolled in this study. 21 pregnancies had confirmed aberrant karyotypes. Trisomy 21 cases showed significantly elevated M-CSF levels of 270 ± 91 pg/ml (p = 0.032), whereas cases of trisomy 13 (183 ± 68 pg/ml) and trisomy 18 (143 ± 40 pg/ml) had low M-CSF levels. Furthermore M-CSF levels tended to be low in preterm deliveries, placental insufficiency and nicotine consumption. In cases with gestational diabetes M-CSF tended to be elevated. Furthermore we found a positive correlation between high free ß-human chorionic gonadotropin (hcg) and MCSF values. There was no correlation between pregnancy associated plasma protein (PAPP-A) and M-CSF. CONCLUSIONS: M-CSF is a cytokine promoting placental growth and differentiation. M-CSF is known to be involved in the process of implantation in pregnancy. The role of M-CSF with respect to disturbed pregnancy outcomes such as placental insufficiency in normal or aberrant karyotypes, for example, is yet subject to further research.

Isolation, characterization and investigation of differentiation potential of human periodontal ligament cells and dental follicle progenitor cells and their response to BMP-7 in vitro.

The aim of this study was to assess the factors, mechanisms and the differences between periodontal ligament (PDL) cells and denta l follicle (DF) progenitor cells towards the osteoblastic/cementoblastic differentiation and to investigate the effects of BMP-7 on developmental (DF) and mature tissue-derived (PDL) cells, respectively. Primary cell culture of PDL cells and DF progenitor cells was performed. Osteogenic differentiation was evaluated using von Kossa, Alizarin Red S and immuno-histo-chemistry staining of osteocalcin. Gene expression pattern was evaluated via real-time PCR. A series of CD surface marks were tested using flow cytometry and fluorescence-activated cell-sorting analysis was performed. Real-time RT-PCR demonstrated similar gene expression pattern of PDL cells and DF progenitor cells: the expression of OPN and OCN significantly was elevated when incubated with osteogenic components, Runx2 was unaffected, and Osteorix was hardly expressed whether in basic medium or induction medium. In addition, BMP-7 induced osteoblast/cementoblast differentiation of PDLSCs and DF progenitor cells in a dose- and time-dependent manner, as reflected by enhanced Runx2 and (OCN) mRNA transcript expression. BMP-7 triggers PDL cells and DF progenitor cells to differentiate towards an osteoblast/cementoblast phenotype.

Rivaroxaban does not impair fracture healing in a rat femur fracture model: an experimental study.

BACKGROUND: The prescription of the oral anticoagulant rivaroxaban to prevent thromboembolic episodes associated with orthopaedic surgery has dramatically increased since it was introduced. Rivaroxaban is beeing prescribed although recent in-vitro studies revealed that it impaired osteoblast metabolism. In this study we analysed the effect of rivaroxaban on fracture healing in a rat femur fracture model. METHODS: Femur fractures were created by a 3-point-bending device in 48 Wistar rats and subsequently stabilized by intramedullary nailing. After the surgical procedure animals were randomised into four groups. Two groups were fed with 3 mg rivaroxaban per kg body weight per day and two control groups were fed with chow only. Animals were euthanized 28 or 49 days after surgical procedure. Femurs underwent undecalcified histologic staining micro CT scanning and biomechanical testing. The statistical significance was evaluated using one-way Anova with Bonferroni correction. RESULTS: Micro CT-scans revealed significantly increased volume of bone tissue in the fracture zone between day 28 and 49. During the same time callus volume decreased significantly. Comparing the fracture zone of the rivaroxaban group to the control group the treated group revealed a larger callus and a marginal increase of the tissue mineral density. The torsional rigidity was not influenced by the treatment of rivaroxaban. CONCLUSION: In the present study we were able to demonstrate that rivaroxaban does not impair fracture healing in a rat femur fracture model. Considering the fact that low molecular weight heparins delay fracture healing significantly, rivaroxaban might be an improved alternative.

Increased infection rates of sinus floor elevations after the use of a bone filter.

OBJECTIVES: The collection of bone debris during the preparation of sinus floor augmentations is a commonly used technique for avoiding autologous bone transplants and thereby reducing donor site morbidity. However, the collected bone debris has a higher risk of bacterial contamination. The aim of this retrospective study was to analyse whether the use of a bone filter had an impact on the infection rates after sinus floor augmentation. MATERIALS AND METHODS: A retrospective analysis was conducted of 340 sinus floor elevations (136 using a bone filter) in 249 patients. The sinus floor elevations were performed with the lateral approach. RESULTS: Localised infection occurred in 7.0 % (24 of 340) of the sinus floor elevations. In 40.0 % of the cases, a bone filter was used, and in this group, the infection rate was 13.0 %. In the control group, the infection rate was 4.0 %. One hundred one patients received bone transplants from the iliac crest, and these patients had a lower infection rate of 2.0 %. Stepwise factor reduction, according to Akaike, showed the use of a bone filter to be the most relevant factor for postoperative infection. CONCLUSIONS: To reduce the amount of bacteria, full-mouth disinfection with chemical agents and a strict aspiration protocol should be used when a bone filter is applied. Antibiotic prophylaxis should be prescribed to reduce the risk of postoperative infections further. CLINICAL RELEVANCE: In use of a bone filter, there is the possibility of higher infection rates of sinus floor augmentations.

Highly porous hydroxyapatite with and without local harvested bone in sinus floor augmentation: a histometric study in pigs.

OBJECTIVE: Sinus floor augmentation with autologous bone is an accepted treatment option in dental implantology. In this study, an entirely synthetic, nano-structured, hydroxyapatite-based bone substitute material (SBSM, NanoBone(®); Artoss, Rostock, Germany) was supplemented with a mixture of locally harvested bone to enhance osteogenesis. METHODS: Bilateral sinus augmentation procedures were performed in eight domestic pigs using the lateral window technique. On the right side (control), 2.6 ml of SBSM was used, and on the left side (test), 2.6 ml of SBSM with additional 15% (390 µl) autologous bone was used. At the time of augmentation, a titanium implant (ITI(®)) was inserted from a laterocaudal direction. After 3 months, the sites of augmentation were removed and examined in non-decalcified sections by microradiography and fluorescence microscopy of sequentially labelled specimens and histometry. RESULTS: On both sides, a significant amount of newly formed bone was observed. However, a statistically significant difference in the bone-implant contact was observed in the control group (median, 28.9%) compared with the test side with the additional autologous bone (median, 40.6%) (P = 0.01). Different bone density was achieved from the coronal to apical surfaces (medians, 54.6%, 9.6%, and 27.5%) compared with the test side (medians, 55.2%, 40.6%, and 44.2%). The median of augmentation height was 8.6 mm on the control side and 11.5 mm on the test side (P = 0.01). Bone apposition was observed in both groups after 15 days. CONCLUSION: The SBSM shows acceptable results in sinus floor augmentation. The additional use of locally harvested autologous bone enhances bone density and osseointegration of the implants.

Prevention of the surface resorption of bone grafts by topical application of bisphosphonate on different carrier materials.

OBJECTIVE: The hypothesis of the present study was that topically applied bisphosphonate (BP) on a collagen membrane or alternatively bovine bone mineral prevents surface resorption of onlay bone grafts. MATERIAL AND METHODS: In eight adult pigs, bone blocks were harvested bilaterally from the mandible and fixed to the lateral cortex of the horizontal ramus to simulate a ridge augmentation. In a split-mouth study design, we used alendronate in aqueous solution (1 mg/ml) on the test-side in three different ways: on a collagen membrane (Bio-Gide®), soaked in bovine bone mineral granules (Bio-Oss®), or applied to the bone graft directly. The same materials without BP were used as controls on the contralateral side. After 3 months, the animals were sacrificed. The evaluation included sequential fluorochromic labeling and measurement of bone height in microradiography and toluidine blue staining. RESULTS: In five cases, necrosis of the overlying periosteal tissues with BP was observed macroscopically. A statistically significantly lower loss in graft height was seen on the test-side for Bio-Gide® + alendronate (0.65 %) versus Bio-Gide® (1.52 %), p = 0.002; Bio-Oss® + alendronate (1.16 %) versus Bio-Oss® (4.20 %), p = 0.001; and bone graft + alendronate (1.25 %) versus bone graft alone (6.01 %), p = 0.006. An inhibitory effect on bone remodeling was observed by a statistically significantly lower number of resorption lacunae. CONCLUSION: The hypothesis was accepted that a bisphosphonate-treated membrane reduced bone graft resorption; however, periosteal necrosis requires better adaptation of the dosage. CLINICAL RELEVANCE: A bisphosphonate membrane could be a helpful tool to preserve augmentation height of onlay bone grafts.

In vivo endocultivation of CAD/CAM hybrid scaffolds in the omentum majus in miniature pigs.

PURPOSE: Correction of bony mandibular defects is a challenge in oral and maxillofacial surgery due to aesthetic and functional requirements. This study investigated the potential of a novel hybrid scaffold for bone regeneration and degradation assessment of the ceramic within the omentum majus over 6 months and the extent to which rhBMP-2 as a growth factor, alone or combined with a hydrogel, affects regeneration. MATERIALS AND METHODS: In this animal study, 10 Göttingen minipigs each had one scaffold implanted in the greater omentum. Five animals had scaffolds loaded with a collagen hydrogel and rhBMP-2, and the other five animals (control group) had scaffolds loaded with rhBMP-2 only. Fluorochrome injections and computed tomography (CT) were performed regularly. After 6 months, the animals were euthanized, and samples were collected for microCT and histological evaluations. RESULTS: Fluorescent and light microscopic and a CT morphological density evaluation showed continuous bone growth until week 16 in both groups. Regarding the ratio of bone attachment to the Zr02 support struts, the rhBMP-2 loaded collagen hydrogel group showed with 63% a significantly higher attachment (p > 0.001) than the rhBMP-2 control group (49%). CONCLUSION: In this study, bone growth was induced in all omentum majus specimens until post-operative week 16. Furthermore, hydrogel and rhBMP-2 together resulted in better bone-scaffold integration than rhBMP-2 alone. Further studies should investigate whether implantation of the scaffolds in the jaw after an appropriate period of bone regeneration leads to a stable situation and the desired results.

Bone regeneration in critical-size defects of the mandible using biomechanically adapted CAD/CAM hybrid scaffolds: An in vivo study in miniature pigs.

The study aimed to analyze bone regeneration in critical-size defects using hybrid scaffolds biomechanically adapted to the specific defect and adding the growth factor rhBMP-2. For this animal study, ten minipigs underwent bilateral defects in the corpus mandibulae and were subsequently treated with novel cylindrical hybrid scaffolds. These scaffolds were designed digitally to suit the biomechanical requirements of the mandibular defect, utilizing finite element analysis. The scaffolds comprised zirconium dioxide-tricalcium phosphate (ZrO2-TCP) support struts and TCP foam ceramics. One scaffold in each animal was loaded with rhBMP-2 (100 µg/cm³), while the other served as an unloaded negative control. Fluorescent dyes were administered every 2 weeks, and computed tomography (CT) scans were conducted every 4 weeks. Euthanasia was performed after 3 months, and samples were collected for examination using micro-CT and histological evaluation of both hard and soft tissue. Intravital CT examinations revealed minor changes in radiographic density from 4 to 12 weeks postoperatively. In the group treated with rhBMP-2, radiographic density shifted from 2513 ± 128 (mean ± SD) to 2606 ± 115 Hounsfield units (HU), while the group without rhBMP-2 showed a change from 2430 ± 131 to 2601 ± 67 HU. Prior to implantation, the radiological density of samples measured 1508 ± 30 mg HA/cm³, whereas post-mortem densities were 1346 ± 71 mg HA/cm³ in the rhBMP-2 group and 1282 ± 91 mg HA/cm³ in the control group (p = 0.045), as indicated by micro-CT measurements. The histological assessment demonstrated successful ossification in all specimens. The newly formed bone area proportion was significantly greater in the rhBMP-2 group (48 ± 10%) compared with the control group without rhBMP-2 (42 ± 9%, p = 0.03). The mean area proportion of remaining TCP foam was 23 ± 8% with rhBMP-2 and 24 ± 10% without rhBMP-2. Successful bone regeneration was accomplished by implanting hybrid scaffolds into critical-size mandibular defects. Loading these scaffolds with rhBMP-2 led to enhanced bone regeneration and a uniform distribution of new bone formation within the hybrid scaffolds. Further studies are required to determine the adaptability of hybrid scaffolds for larger and potentially segmental defects in the maxillofacial region.