Assessing the protective effect of cutoff walls on groundwater pumping against saltwater upconing in coastal aquifers.

Subsurface physical barriers are amongst the most effective methods to mitigate seawater intrusion in coastal aquifers. The main objective of this study was to examine the impact of cutoff walls on saltwater upconing using laboratory and numerical modelling experiments. Physical experiments were first completed to reproduce the saltwater upconing process in a laboratory-scale coastal aquifer model incorporating an impermeable cutoff wall. Numerical modelling was used for validation purposes and to perform additional simulations to explore the protective effect of cutoff walls against saltwater upconing. The results suggest that the cutoff wall did not substantially delay the saltwater upconing mechanism in the investigated configurations. Laboratory and numerical observations showed the existence of some residual saline water, which remained on the upper part of the aquifer on the seaward side of the wall following the retreat of the saltwater. The protective effect of cutoff walls was noticeably sensitive to the design parameters. Specifically, cutoff walls installed close to the pumping well enabled the implementation of higher pumping rates, therefore a more optimal use of the freshwater, especially for deeper wells. The results highlighted that the penetration depth of the cutoff walls may not necessarily need to exceed the depth of the pumping well to ensure effectiveness, which is of great importance from construction and economic perspectives.

Immobilization of biosynthesized gallium nanoparticles in Polyvinylpyrrolidone/Sodium alginate films: Potent bactericidal protection against food spoilage bacteria.

The increasing threat of spoilage bacterial infections, driven by the resistance of bacteria to many antimicrobial treatments, is a significant worldwide public health problem, especially concerning food preservation. To tackle these difficulties, this research investigates the possibility of using packaging sheets that include antimicrobial agents and increasing the prolonged storage time by preventing the bioburden of foodborne pathogens. This approach uses metal nanoparticles' ability to prevent harmful bacteria that cause food spoiling. Gallium nanoparticles (GaNPs) were created using a water-based extract from Andrographis paniculata leaves as a bioreducing agent. The GaNPs were added to a film made of sodium alginate (SA) and polyvinylpyrrolidone (PVP). The study showed that incorporating GaNPs into polymer films resulted in films with a desirable contact angle and decreased water vapor permeability. Significantly, the developed films demonstrated increased efficiency against E.coli O157 compared to other species. Also, it exhibited increased vulnerability to bacterial strains at the biofilm stage, surpassing PVP-SA/GaNPs-0. Remarkably, the toxicity tests showed that the films exhibited no cytotoxicity. Overall, the films indicated their potential for avoiding bacterial bioburden, prolonging the shelf life of perishable products, and contributing to diverse antimicrobial applications in the food industry.

Thermoresponsive nanofibers loaded with antimicrobial α-aminophosphonate-o/w emulsion supported by cellulose nanocrystals for smart wound care patches.

Long-term topical application of antibiotics on wounds has led to the emergence of drug-resistant bacterial infections. Antibiotic incorporation into the wound dressing requires enormous advancement of the field to ensure that the needed dose is released when the infection arises. This study synthesized a series of antimicrobial α-aminophosphonate derivatives, and the most effective compound was incorporated into thermoresponsive wound dressing patches. Wound dressing mats were fabricated by needleless electrospinning, and the resultant nanofiber mats were coated with a thermoresponsive eicosane/cellulose nanocrystals o/w system loaded with active α-aminophosphonate derivatives. Chemical, physical, thermal, and antimicrobial properties of the wound dressings were characterized wound dressings. Using SEM analysis, Nanofibers spun with 20 % w/v solutions were selected for drug-emulsion loading since they showed lower diameters with higher surface area. Furthermore, the drug-emulsion coating on the electrospun dressings improved the hydrophilicity of the wound dressings, and the thermoresponsive behavior of the mats was proved using differential scanning calorimetry data. Finally, the drug-loaded electrospun meshes were found active against tested microorganisms, and clear inhibition zones were observed. In conclusion, this novel approach of synthesizing a new family of antimicrobial molecules and their incorporation into nanofibers from renewable sources exhibits great potential for smart and innovative dressings.

Mechanical characterization of a novel biomimetic artificial disc for the cervical spine.

A novel biomimetic artificial intervertebral disc (bioAID) replacement implant has been developed containing a swelling hydrogel representing the nucleus pulposus, a tensile strong fiber jacket as annulus fibrosus and titanium endplates with pins to primarily secure the device between the vertebral bodies. In this study, the design safety of this novel implant was evaluated based on several biomechanical parameters, namely compressive strength, shear-compressive strength, risk of subsidence and device expulsion as well as identifying the diurnal creep-recovery characteristics of the device. The bioAID remained intact up to 1 kN under static axial compression and only 0.4 mm of translation was observed under a compressive shear load of 20 N. No subsidence was observed after 0.5 million cycles of sinusoidal compressive loading between 50 and 225 N. After applying 400 N in antero-posterior direction under 100 N axial compressive preload, approximately 2 mm displacement was found, being within the range of displacements reported for other commercially available cervical disc replacement devices. The diurnal creep recovery behavior of the bioAID closely resembled what has been reported for natural intervertebral discs in literature. Overall, these results indicate that the current design can withstand (shear-compression loads and is able to remain fixed in a mechanical design resembling the vertebral bodies. Moreover, it is one of the first implants that can closely mimic the poroelastic and viscoelastic behavior of natural disc under a diurnal loading pattern.

Self-crosslinked polyvinyl alcohol/cellulose nanofibril cryogels loaded with synthesized aminophosphonates as antimicrobial wound dressings.

Microbial infection is the most common obstacle in the wound healing process, leading to wound healing impairment and complications and ultimately increasing morbidity and mortality. Due to the rising number of pathogens evolving resistance to the existing antibiotics used for wound care, alternative approaches are urgently required. In this study, α-aminophosphonate derivatives as antimicrobial agents were synthesized and incorporated into self-crosslinked tri-component cryogels composed of fully hydrolyzed polyvinyl alcohol (PVA-F), partially hydrolyzed polyvinyl alcohol (PVA-P), and cellulose nanofibrils (CNFs). Initially, the antimicrobial activity of four α-aminophosphonate derivatives against selected skin bacterial species was tested and their minimum inhibitory concentration was determined based on which the most effective compound was loaded into the cryogels. Next, the physical and mechanical properties of cryogels with various blending ratios of PVA-P/PVA-F and fixed amounts of CNFs were assessed, and drug release profiles and biological activities of drug-loaded cryogels were analyzed. Assessment of α-aminophosphonate derivatives showed the highest efficacy of a cinnamaldehyde-based derivative (Cinnam) against both Gram-negative and Gram-positive bacteria compared to other derivatives. The physical and mechanical properties of cryogels showed that PVA-P/PVA-F with a 50/50 blending ratio had the highest swelling ratio (1600%), surface area (523 m2 g-1), and compression recoverability (72%) compared to that with other blending ratios. Finally, antimicrobial and biofilm development studies showed that the cryogel loaded with a Cinnam amount of 2 mg (relative to polymer weight) showed the most sustained drug release profile over 75 h and had the highest efficacy against Gram-negative and Gram-positive bacteria. In conclusion, self-crosslinked tri-component cryogels loaded with the synthesized α-aminophosphonate derivative, having both antimicrobial and anti-biofilm formation properties, can have a significant impact on the management of uprising wound infection.

Biomechanical evaluation of a novel biomimetic artificial intervertebral disc in canine cervical cadaveric spines.

Background Context: Cervical disc replacement (CDR) aims to restore motion of the treated level to reduce the risk of adjacent segment disease (ASD) compared with spinal fusion. However, first-generation articulating devices are unable to mimic the complex deformation kinematics of a natural disc. Thus, a biomimetic artificial intervertebral CDR (bioAID), containing a hydroxyethylmethacrylate (HEMA)-sodium methacrylate (NaMA) hydrogel core representing the nucleus pulposus, an ultra-high-molecular-weight-polyethylene fiber jacket as annulus fibrosus, and titanium endplates with pins for primary mechanical fixation, was developed. Purpose: To assess the initial biomechanical effect of the bioAID on the kinematic behavior of the canine spine, an ex vivo biomechanical study in 6-degrees-of-freedom was performed. Study Design: A canine cadaveric biomechanical study. Methods: Six cadaveric canine specimens (C3-C6) were tested in flexion-extension (FE), lateral bending (LB) axial rotation (AR) using a spine tester in three conditions: intact, after C4-C5 disc replacement with bioAID, and after C4-C5 interbody fusion. A hybrid protocol was used where first the intact spines were subjected to a pure moment of ±1 Nm, whereafter the treated spines were subjected to the full range of motion (ROM) of the intact condition. 3D segmental motions at all levels were measured while recording the reaction torsion. Biomechanical parameters studied included ROM, neutral zone (NZ), and intradiscal pressure (IDP) at the adjacent cranial level (C3-C4). Results: The bioAID retained the sigmoid shape of the moment-rotation curves with a NZ similar to the intact condition in LB and FE. Additionally, the normalized ROMs at the bioAID-treated level were statistically equivalent to intact during FE and AR while slightly decreased in LB. At the two adjacent levels, ROMs showed similar values for the intact compared to the bioAID for FE and AR and an increase in LB. In contrast, levels adjacent to the fused segment showed an increased motion in FE and LB as compensation for the loss of motion at the treated level. The IDP at the adjacent C3-C4 level after implantation of bioAID was close to intact values. After fusion, increased IDP was found compared with intact but did not reach statistical significance. Conclusion: This study indicates that the bioAID can mimic the kinematic behavior of the replaced intervertebral disc and preserves that for the adjacent levels better than fusion. As a result, CDR using the novel bioAID is a promising alternative treatment for replacing severely degenerated intervertebral discs.

Curcumin and Silver Doping Enhance the Spinnability and Antibacterial Activity of Melt-Electrospun Polybutylene Succinate Fibers.

Melt electrospinning is a polymer processing technology for the manufacture of microfibers and nanofibers. Additives are required to reduce the melt viscosity and increase its conductivity in order to minimize the fiber diameter, and can also impart additional beneficial properties. We investigated the preparation of polybutylene succinate (PBS) microfibers incorporating different weight percentages of two multifunctional additives (the organic dye curcumin and inorganic silver nanoparticles) using a single-nozzle laboratory-scale device. We determined the influence of these additives on the polymer melt viscosity, electrical conductivity, degradation profile, thermal behavior, fiber diameter, and antibacterial activity. The formation of a Taylor cone followed by continuous fiber deposition was observed for compounds containing up to 3% (w/w) silver nanoparticles and up to 10% (w/w) curcumin, the latter achieving the minimum average fiber diameter of 12.57 µm. Both additives reduced the viscosity and increased the electrical conductivity of the PBS melt, and also retained their specific antibacterial properties when compounded and spun into fibers. This is the first report describing the effect of curcumin and silver nanoparticles on the properties of PBS fibers manufactured using a single-nozzle melt-electrospinning device. Our results provide the basis to develop environmentally benign antibacterial melt-electrospun PBS fibers for biomedical applications.

Bioactive tri-component nanofibers from cellulose acetate/lignin//N-vanillidene-phenylthiazole copper-(II) complex for potential diaper dermatitis control.

Current research targets innovative medical textiles of nanofibrous nature and antibacterial activity to prevent diaper dermatitis. The work is based on electrospun nanofibers from cellulose acetate (CA) and lignin (Lig) polymers. A series of new copper complexes were synthesized and loaded to the CA/Lig solution mix then subjected to electrospinning, giving rise to the tricomponent bioactive mats CA/Lig/Cu-complex. The surface morphology of electrospun nanofiber mats was smooth and homogenous as the concentration of lignin increased in the mixture. The incorporation of lignin improved the electrospinnability of the cellulose acetate; however, it increased the fiber diameter. The water contact angle, absorption underload were significantly improved as lignin content increased. The incorporation of Cu-complex in electrospun CA and CA/Lig fiber mats occurred without any substantial change in the surface morphology, indicating well encapsulation of the complex. The electrospun mats were active against Pseudomonas aeruginosa, Acinetobacter baumannii, Staphylococcus epidermidis, and Streptococcus faecalis. The cytotoxicity, protein leakage, and biological results, together with the above studies, would advocate copper complex loaded CA/Lig nanofibers as a potential candidate for hygienic applications.

Drug-Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery.

Drug-eluting medical textiles have recently gained great attention to be used in different applications due to their cost effectiveness and unique physical and chemical properties. Using various fiber production and textile fabrication technologies, fibrous constructs with the required properties for the target drug delivery systems can be designed and fabricated. This review summarizes the current advances in the fabrication of drug-eluting medical textiles. Different fiber production methods such as melt-, wet-, and electro-spinning, and textile fabrication techniques such as knitting and weaving are explained. Moreover, various loading processes of bioactive agents to obtain drug-loaded fibrous structures with required physicochemical and morphological properties, drug delivery mechanisms, and drug release kinetics are discussed. Finally, the current applications of drug-eluting fibrous systems in wound care, tissue engineering, and transdermal drug delivery are highlighted.

Synthesis, antimicrobial activity, and sustainable release of novel α-aminophosphonate derivatives loaded carrageenan cryogel.

Novel α-aminophosphonates 4 were synthesized via one pot three-component reaction of 4-aminoantipyrine, aldehydes, triphenylphosphite and Lewis acid catalyst. The chemical structures of all the synthesized compounds were elucidated by IR, NMR and MS spectral analysis. The antimicrobial activity of 4 was tested in vitro against pathogenic microbes such as E.coli, S.aureus, A.niger and C.albicans. Three of them (4f-h) exhibited high antimicrobial activity and were loaded to carrageenan cryogel for drug delivery studies. With the aid of cellulose nanofibrils (CNF) as reinforcing material and glyoxal as a cross-linking agent, porous cryogels with improved mechanical properties were obtained. Among all, CAR-7 presents the optimum cryogel sample, which contained around 16% CNF and 0.2 mL/15 mL polymer blend. CAR-7 demonstrated highest mechanical compressive strength, porosity (80%), and swelling capacity (75%). Sustainable release behavior over 24 h was observed for the loaded cryogels. The antimicrobial activity of cryogels against S.aureus showed marginal differences between samples. CAR-9 (loaded with 4f) showed the highest reduction percentage in number of bacterial colonies (99.94%) followed by CAR-11 (loaded with 4h, 99.3%) and finally CAR-10 (loaded with 4g, 99.29%).

Chitosan nanoparticles: Polyphosphates cross-linking and protein delivery properties.

Nanoparticles from chitosan, in general, can be prepared through ionotropic gelation, physical crosslinking, with anionic polyphosphates. Tripolyphosphate (TPP) is widely used for such purpose especially in drug delivery applications. TPP is a small ion with a triple negative charge throughout the physiologically acceptable pH range. However, the stability of size and surface charge of the particles still challenging. In the current work, the utilization of Hexametaphosphate (HMP) instead of Tripolyphosphate (TPP) as a cross-linking agent is being investigated. HMP is hexavalent molecule in the neutral and slightly basic medium which offers more binding sites readily available for interaction with chitosan. It is thought that increasing the availability of the binding sites in the HMP molecule would result in stronger ionic complexation with chitosan cationic charges. Consequently, such stronger binding improves particles' stability and lead to average size reduction. A comparative study between chitosan/TPP and chitosan/HMP nanoparticles under different complexation conditions was conducted to investigate the effect of HMP on nanoparticles formation. Bovine Serum Albumin (BSA) was applied as a protein model drug to explore the drug loading efficiency, 96.3%, is higher than its TPP, 91.87%, counterparts. However, TPP cross-linked particles showed superior stability upon storage.

Fabrication and characterization of bactericidal thiol-chitosan and chitosan iodoacetamide nanofibres.

Two chitosan derivatives, namely, thiol-chitosan (TCs) and chitosan iodoacetamide (CsIA) were newly synthesized by reacting Cs with thiglycolic acid (TGA) and iodoacetic acid (IA) respectively. After being crosslinked with glutraldehyde (GA), the two derivatives were submitted to FT-IR and H1 NMR analysis for identification and characterization of their chemical features. As TCs and CsIA are water soluble, their electrospun nanofibres mats from aqueous solutions could be crosslinked and achieved using polyvinyl alcohol/Chitosan blend (PVA/Cs) polymers. Morphological structures of the obtained nanofibres and their webs were studied via those of TCs and CsIA free systems. The data also indicate that the crosslinked PVA/Cs/CsIA is more thermally stable than the crosslinked PVA/Cs/TCs and crosslinked PVA/Cs respectively. It was proved that the electrospun fibers containing TCs or CsIA display a superior antibacterial activity against negative bacteria E. Coli with a minimum inhibitory concentration (MIC) of 400µg/ml. These effects are rather in confirmation with bacterial kinetics essays which were also carried out in current work. Of particular interest is that the antimicrobial properties of fibers containing small concentration of either TCs or CsIA are much superior than those obtained with neat Cs electrospun nanofibres used as reference. By and large the results advocate the fibers webs containing TCs or CsIA as excellent candidates for wound dressing applications.

Durable antibacterial and UV protections of in situ synthesized zinc oxide nanoparticles onto cotton fabrics.

Herein we represent a new discovery based on amine material called hexamethyltriethylene tetramine (HMTETA). We have observed that when an aqueous solution of Zn(NO3)·6H2O was added to aqueous solution of HMTETA followed by shaking for a time, the colorless solution was converted to milky color under the alkaline medium provided by HMTETA prior to formation of uniform zinc oxide nanoparticles (ZnO NPs). The latter are in situ formed within the cotton fabrics without the support of capping or other stabilizing agents. Obviously, then, the new made of formation of ZnO NPs speaks of a single-stage process where cotton fabric is immersed in a prepared solution of the new precursors through which binding of ZnO NPs into the textile fabrics takes place. Textile fabrics are, indeed, used as a template, which is capable of maintaining the size and surface distribution of the as-synthesized nanoparticles in a uniform domain. It is also likely that nanoparticles is confined inside the fibril and microfibrils of the cotton fibers. World-class facilities have been employed to follow up the synthesis of ZnO NPs, their characterization and their application to confer, in particular, high durable antibacterial and UV protective function on cotton fabrics.

Curdlan in fibers as carriers of tetracycline hydrochloride: Controlled release and antibacterial activity.

Curdlan (CURD) and polyethylene oxide were used to synthesize nanofibers as carriers of hydro soluble tetracycline hydrochloride (TCH). The viscosity, surface tension and conductivity of the precursor multicomponent aqueous solutions were determined and adjusted to produce defect-free fiber webs. Except for a slight increase in diameter, the addition of TCH did not affect the original morphology of the CURD/PEO nanofibers, as determined by FE-SEM imaging. However, the thermal stability of the system was enhanced (TGA and DSC). Moreover, water resistance, as measured with 24-h immersion tests, was observed upon crosslinking with glutaraldehyde. In-vitro activity measurements indicated a sustained and controlled TCH time-release pattern and excellent antibacterial activity against E. coli, as assessed by UV-vis spectroscopy and viable cell counting, respectively. Overall, we propose nanofibers based on CURD as promising platforms for scaffolds for wound dressing and drug delivery.

Antibacterial activity of silver nanoparticles synthesized In-situ by solution spraying onto cellulose.

Spray technique was used for the adsorption of in-situ silver nanoparticles (AgNPs) onto and inside the surface of nano- and micro- fibrillar cellulose (NFC and MFC) as well as filter paper. The abundance of hydroxyl and carboxyl groups located in NFC and MFC are used to stabilize Ag ions (Ag(+)) which were then in-situ reduced to (AgNPs) by chemical or UV reduction. The surface characteristic features, elemental analysis, particle size as well as size distribution of the obtained MFC, NFC and filter paper loaded with AgNPs were characterized via field emission scanning electron microscopy connected to energy dispersive X-ray spectroscopy (FESEM- EDX) and transmission electron microscopy (TEM). The associated chemical changes after growth of AgNPs onto the cellulose substrates were assessed by fourier transform infra-red (FT-IR) while the thermal stability of such systems were investigated by thermogravimetrical analyses (TGA). The antibacterial properties of AgNPs loaded NFC, MFC and filter paper as well was investigated against Escherichia Coli. The resulted data indicate that the particle size was found to be 11 and 26nm for AgNPs nucleated on NFC and MFC-based papers respectively. The antibacterial activity of AgNPs loaded MFC exhibited higher antibacterial activity than that of AgNPs loaded NFC. Overall, the present research demonstrates facile and fast method for in-situ antibacterial AgNPs loading on cellulose substrates.

Antimicrobial wound dressing nanofiber mats from multicomponent (chitosan/silver-NPs/polyvinyl alcohol) systems.

Novel hybrid nanomaterials have been developed for antimicrobial applications. Here we introduce a green route to produce antibacterial nanofiber mats loaded with silver nanoparticles (Ag-NPs, 25 nm diameter) enveloped in chitosan after reduction with glucose. The nanofiber mats were obtained from colloidal dispersions of chitosan-based Ag-NPs blended with polyvinyl alcohol. Nanofibers (150 nm average diameter and narrow size distribution) were obtained by electrospinning and cross-linked with glutaraldhyde. The effect of crosslinking on the release of silver was studied by atomic absorption spectroscopy. Antimicrobial activity was studied by the viable cell-counting; mats loaded with silver and control samples (chitosan/PVA) with different degrees of cross-linking were compared for their effectiveness in reducing or halting the growth of aerobic bacteria. The results showed superior properties and synergistic antibacterial effects by combining chitosan with Ag-NPs.