Toward structured macroporous hydrogel composites: electron beam-initiated polymerization of layered cryogels.

The ability to tailor mechanical properties and architecture is crucial in creating macroporous hydrogel scaffolds for tissue engineering. In the present work, a technique for the modification of the pore size and stiffness of acrylamide-based cryogels is demonstrated via the regulation of an electron beam irradiation dose. The samples were characterized by equilibrium swelling measurements, light and scanning electron microscopy, mercury porosimetry, Brunauer-Emmett-Teller surface area analysis, and stiffness measurements. Their properties were compared to cryogels prepared by a standard redox-initiated radical polymerization. A (125)I radiolabeled azidopentanoyl-GGGRGDSGGGY-NH2 peptide was bound to the surface to determine the concentration of the adhesive sites available for biomimetic modification. The functionality of the prepared substrates was evaluated by in vitro cultivation of adipose-derived stem cells. Moreover, the feasibility of preparing layered cryogels was demonstrated. This may be the key to the future preparation of complex hydrogel-based scaffolds to mimic the extracellular microenvironment in a wide range of applications.

Measurement of doping profiles by a contactless method of IR reflectance under grazing incidence.

An improved contactless method of the measurement and evaluation of charge carrier profiles in polished wafers by infrared reflectance was developed. The sensitivity of optical reflectance to the incidence angle was theoretically analyzed. A grazing incident angle enhances sensitivity to doping profile parameters. At the same time, the sensitivity to experimental errors sharply increases around the Brewster angle. Therefore, the optimal angle of 65° was chosen. Experimental errors such as unintentional polarization of the measurement beam were minimized by division by reference spectra taken on an undoped sample and further by normalization to a fixed value in the region of 4000 cm-1 to 7000 cm-1. The carrier profile in boron-doped samples was parametrized by 3 parameters and that in phosphorous-doped samples was parametrized by 4 parameters, using additional empirically determined assumptions. As a physical model, the Drude equation is used with two parameters assumed to be concentration-dependent: relaxation time and contribution from band-to-band excitations. The model parameters were calibrated independently by infrared ellipsometry. The presented method gives results in satisfactory agreement with the profiles measured by the electrochemical capacitance-voltage method.

A frame-supported ultrathin electrospun polymer membrane for transplantation of retinal pigment epithelial cells.

We report on the design and fabrication of a frame-supported nanofibrous membrane for the transplantation of retinal pigment epithelial (RPE) cells, which is a promising therapeutic option for the treatment of degenerative retinal disorders. The membranous cell carrier prepared from 640 nm-thick poly(DL-lactide) fibres uniquely combines high porosity, large pore size and low thickness, to maximize the nutrient supply to the transplanted cells in the subretinal space and thus to enhance the therapeutic effect of the transplantation. The carrier was prepared by electrospinning, which made it easy to embed a 95 µm-thick circular supporting frame 2 mm in diameter. Implantations into enucleated porcine eyes showed that the frame enabled the ultrathin membrane to be handled without irreversible folding, and allowed the membrane to regain its flat shape when inserted into the subretinal space. We further demonstrated that the minimum membrane thickness compatible with the surgical procedure and instrumentation employed here was as low as 4 µm. Primary porcine RPE cells cultivated on the membranes formed a confluent monolayer, expressed RPE-specific differentiation markers and showed transepithelial resistance close to that of the native RPE. Most importantly, the majority of the RPE cells transplanted into the subretinal space remained viable. The ultrathin, highly porous, and surgically convenient cell carrier presented here has the potential to improve the integration and the functionality of transplanted RPE cells.