2,4-Dimethoxy-2,4-dimethylpentan-3-one: An Aprotic Solvent Designed for Stability in Li-O2 Cells.

In this study, we present a new aprotic solvent, 2,4-dimethoxy-2,4-dimethylpentan-3-one (DMDMP), which is designed to resist nucleophilic attack and hydrogen abstraction by reduced oxygen species. Li-O2 cells using DMDMP solutions were successfully cycled. By various analytical measurements, we showed that even after prolonged cycling only a negligible amount of DMDMP was degraded. We suggest that the observed capacity fading of the Li-O2 DMDMP-based cells was due to instability of the lithium anode during cycling. The stability toward oxygen species makes DMDMP an excellent solvent candidate for many kinds of electrochemical systems which involve oxygen reduction and assorted evaluation reactions.

A Unified Synthesis of Electron-Deficient 1,4- and 1,1,4-Substituted 1,3-Dienes through a Base-Promoted Allylation Followed by Retro-Michael Vinylogous Dehydrosulfinylation.

We disclose a general 2-step synthesis of electron-poor 1,4- and 1,1,4-substituted buta-1,3-dienes bearing electron-withdrawing substituents at both termini of the conjugated system. The method relies on a base-promoted C-allylation of primary or secondary alkylsulfones with γ-bromocrotonate or related amide, nitrile, or sulfone and subsequent vinylogous retro-Michael dehydrosulfinylation. The geometry of the resulting dienes is substrate-dependent, and predominantly E,E-dienes are formed from E-electrophiles. This phosphorus- and transition-metal-free method tolerates a variety of functionalities and could serve as a supplement to Wittig, HWE, and Julia olefinations.

CF3-Substituted Ethylene Carbonates for High-Voltage/High-Energy Rechargeable Lithium Metal-LiNi0.8Co0.1Mn0.1O2 Batteries.

The development of advanced liquid electrolytes for high-voltage/high-energy rechargeable Li metal batteries is an important strategy to attain an effective protective surface film on both the Li metal anode and the high-voltage composite cathode. Herein, we report a study of two CF3-substituted ethylene carbonates as components of the electrolyte solutions for Li metal|NCM811 cells. We evaluated trifluoromethyl ethylene carbonate (CF3-EC) and trans-ditrifluoromethylethylene carbonate Di-(CF3)-EC as cosolvents and additives to the electrolyte solutions. Using CF3-substituted ethylene carbonates as additives to a fluoroethylene carbonate (FEC)-based electrolyte solution enables improved capacity retention of high-power Li metal|NCM811 cells. The composition of the products from the transformations of CF3-EC and Di-(CF3)-EC in Li|NCM811 cells was studied by FTIR, XPS, and 19F NMR spectroscopy. We concluded that fluorinated Li alkyl carbonates are the main reaction products formed from these cyclic carbonates during the cycling of Li|NCM 811 cells, and fragmentation of the ring with the formation of CO2, CO, or olefins is not characteristic of CF3-substituted ethylene carbonates. The NCM 811 cathodes and Li metal anodes were characterized by X-ray diffraction, SEM, XPS, and FTIR spectroscopy. The role of CF3-substituted ethylene carbonate additives in stabilizing high energy density secondary batteries based on Li metal anodes was discussed. A bright horizon for developing sustainable rechargeable batteries with the highest possible energy density is demonstrated.

The effect of intercalants on the host liposome.

When phospholipids are vigorously dispersed in water, liposomes are formed. In the present study, we have explored the effect of intercalant concentration on various properties of unilamellar liposomes. Liposomes were sonically intercalated with vitamin E acetate (VitEAc) and hypericin (Hy) until no difference in light transmission was observed, which reflects the formation of liposomes of minimal diameter. Our studies indicate that the intercalant structure and concentration have an influence on the liposome diameter, which could be directly measured by cryogenic transmittance electronic microscopy. Thus, intercalated VitEAc substantially decreased the diameter of unilamellar dimyristoylphosphatidylcholine liposomes, whereas Hy did not. In addition, we followed peak intensities in the absorbance and fluorescence spectra of Hy as a function of intercalant concentration in the liposomal solution. Initially, the fluorescence intensity increased linearly with concentration; however, the curve then arched asymptotically, followed by a decrease in fluorescence at yet higher concentrations. Because the Hy monomer is the only species that emits fluorescence, we believe that the decrease of fluorescence intensity is the result of Hy aggregation.

Chemical chaperones targeted to the endoplasmic reticulum (ER) and lysosome prevented neurodegeneration in a C9orf72 repeat expansion drosophila amyotrophic lateral sclerosis (ALS) model.

BACKGROUND: ALS is an incurable neuromuscular degenerative disorder. A familiar form of the disease (fALS) is related to point mutations. The most common one is an expansion of a noncoding GGGGCC hexanucleotide repeat of the C9orf72 gene on chromosome 9p21. An abnormal translation of the C9orf72 gene generates dipeptide repeat proteins that aggregate in the brain. One of the classical approaches for developing treatment against protein aggregation-related diseases is to use chemical chaperones (CSs). In this work, we describe the development of novel 4-phenylbutyric acid (4-PBA) lysosome/ER-targeted derivatives. We assumed that 4-PBA targeting to specific organelles, where protein degradation takes place, might reduce the 4-PBA effective concentration. METHODS: Organic chemistry synthetic methods and solid-phase peptide synthesis (SPPS) were used for preparing the 4-PBA derivatives. The obtained compounds were evaluated in an ALS Drosophila model that expressed C9orf72 repeat expansion, causing eye degeneration. Targeting to lysosome was validated by the 19F-nuclear magnetic resonance (NMR) technique. RESULTS: Several synthesized compounds exhibited a significant biological effect by ameliorating the eye degeneration. They blocked the neurodegeneration of fly retina at different efficacy levels. The most active CS was compound 9, which is a peptide derivative and was targeted to ER. Another active compound targeted to lysosome was compound 4. CONCLUSIONS: Novel CSs were more effective than 4-PBA; therefore, they might be used as a new class of drug candidates to treat ALS and other protein misfolding disorders.

ß-Cyanuryl Ribose, ß-Barbituryl Ribose, and 6-Azauridine as Uridine Mimetics.

Uridine (U) mimetics are sought after as tools for biochemical and pharmacological studies. Previously, we have identified recognition patterns of U by proteins. Here, we targeted the characterization of uridine mimetics-cyanuryl-ribose (CR), barbituryl-ribose (BR), and 6-azauridine (AU)-with a view to identify analogs with potentially more binding interactions than U with target biomolecules. We found that CR, BR, and AU retain selective U's natural H-bonds with adenosine vs guanosine. CR/AU and BR were 100- and 10,000-fold more acidic, respectively, than U. Under physiological pH, 54, 51, and 77% of CR, AU, and BR molecules, respectively, are ionized vs 13% for U. The electron-rich nature of CR and BR vs U was reflected by their 13C NMR chemical shifts and ε values. CR/AU and BR prefer N conformation (up to 73%) vs U (56%). Unlike U that prefers gg conformation around exocyclic methylol (48%), CR/AU and BR prefer both gt and gg rotamers. In conclusion, replacement of uridine's C6 by N or carbonyl, or C5-C6 by an amide, results in significant changes in U's ionization, electron density, conformation, base-stacking, etc., leading to potentially tighter binding than U with a target protein or nucleic acid and potential use for various biochemical and pharmacological applications.

Locating intercalants within lipid bilayers using fluorescence quenching by bromophospholipids and iodophospholipids.

In previous work, we have been able to determine the depth of intercalated molecules within the lipid bilayer using the solvent polarity sensitivity of three spectroscopic techniques: the 13C NMR chemical shift (δ); the fluorescence emission wavelength (λem), and the ESR ß-H splitting constants (aß-H). In the present paper, we use the quenching by a heavy atom (Br or I), situated at a known location along a phospholipid chain, as a probe of the location of a fluorescent moiety. We have synthesized various phospholipids with bromine (or iodine) atoms substituted at various locations along the lipid chain. The latter halolipids were intercalated in turn with various fluorophores into DMPC liposomes, biomembranes and erythrocyte ghosts. The most effective fluorescence quenching occurs when the heavy atom location corresponds to that of the fluorophore. The results show that generally speaking the fluorophore intercalates the same depth independent of which lipid bilayer is used. KBr (or KI) is the most effective quencher when the fluorophore resides in or at the aqueous phase. Presumably because of iodine's larger radius and spin coupling constant, the iodine analogs are far less discriminating in the depth range it quenches.

Determining radical penetration of lipid bilayers with new lipophilic spin traps.

Predicting the susceptibility of lipid moieties to radical attack requires a determination of the depth of radical penetration into a lipid membrane. We thus synthesized three homologous series of lipophilic spin traps--DMPO analogs 2-alkanoyl-2-methyl-1-pyrroline N-oxides (11) and PBN derivatives 4-alkoxyphenyl N-tert-butylnitrones (18) and 4-alkoxyphenyl N-admantylnitrones (20). The intercalation depth of these spin traps within the liposomal bilayer was determined via the previously reported NMR technique, which correlates the chemical shift and the micropolarity (measured in ET(30) units) experienced by the pivotal nitronyl carbon. Hydroxyl and alpha-hydroxyalkyl radicals were generated in the extraliposomal aqueous phase and the lowest depth at which a radical could be spin trapped was determined. The ESR data indicate that these radicals can exit the aqueous phase, penetrate the lipid bilayer past the head groups (ET(30)=63 kcal/mol) and the glycerol ester (ET(30)=52 kcal/mol), and pass down to an ET(30) polarity of at least 44 kcal/mol. The latter depth presumably corresponds to the upper portion of the lipid slab. It is likely, if not probable, that having come this far they can abstract the allylic/diallylic hydrogens resident in the midslab at ET(30) values of >31 kcal/mol.

Aggregate formation in the intercalation of long-chain fatty acid esters into liposomes.

Various hydrophobic benzenediacetic esters, the corresponding benzenedipropionic esters, and branched alkyl esters were intercalated into DMPC liposomes, where the molar ratio (n/n) of ester:DMPC was 1:5. In the case of the very long-chain derivatives, double carbonyl peaks were observed in the 13C NMR spectrum. This doubling phenomenon was observed only for the carbonyl peaks, whose chemical shift is most sensitive to solvent polarity, and disappeared when the ester:DMPC molar ratio drops below 1:15. This doubling reflects the presence of two populations in these samples: one group includes those molecules which are intercalated within the liposome and feel the polarity corresponding to the liposomal microenvironment; the other consists of aggregates of these long-chain derivatives located in the extra-liposomal aqueous phase.

NMR-based molecular ruler for determining the depth of intercalants within the lipid bilayer Part II. The preparation of a molecular ruler.

We have previously shown how the location of an intercalant within the lipid bilayer can be qualitatively determined by using the excellent correlation that exists between the 13C NMR chemical shift of a polarizable carbon (e.g., the carbonyl or nitronyl carbon) and the polarity (using the Dimroth-Reichardt's ET(30) parameter) of the microenvironment in which that carbon resides. In a companion paper, we have determined criteria for reporter molecules that will assist us in converting this qualitative polarity data into quantitative Angstrom values. In the present paper, we report on our initial success in quantitatively mapping of the DMPC bilayer by linking two or more vertical points within a bilayer by both distance (in Angstroms) and ET(30) polarity. The results correlated well with the values obtained using the "parallax method" of Erwin London.

NMR-based molecular ruler for determining the depth of intercalants within the lipid bilayer Part I. Discovering the guidelines.

The development of "molecular rulers" would allow one to quantitatively locate intercalants within the liposomal bilayer. To this end, we have attempted to correlate the 13C NMR chemical shift of a polarizable "reporter" carbon (e.g., carbonyl) of the intercalant-with the ET30 polarity it experiences, and with its Angstrom distance from the interface. This requires families of molecules with the same two "reporter carbons" separated by a fixed distance, residing at various depths/polarities within the bilayer. The families studied included 4,4-dialkylcyclohexa-2,5-dienones 1, benzenediacetic esters 15, benzenedipropionic esters 17, 4-alkoxybenzaldehydes 19 and methyl 4-alkoxybenzoates 22. These compounds possessed the following characteristics: (1) a planar backbone; (2) polar/hydrophilic "head" groups; (3) modular hydrophobic tails; (4) large changes in the 13C NMR chemical shift (Deltadelta) of the reporter atoms with solvent polarity. These studies revealed a fifth requirement, namely: (5) the reporter carbons must not be strongly conjugated, lest it reflect the charge build-up at another site within the conjugated system.

An Expedient Synthesis of CMF-019: (S)-5-Methyl-3-{1-(pentan-3-yl)-2- (thiophen-2-ylmethyl)-1H-benzo[d]imidazole-5-carboxamido}hexanoic Acid, a Potent Apelin Receptor (APJ) Agonist.

BACKGROUND: Apelin receptor (APJ) is a G protein-coupled receptor (GPCR) activated by the endogenous peptide apelin. The apelin-APJ system has emerged as an important regulator of cardiovascular homeostasis. Recently, a potent benzimidazole-derived apelin peptidomimetic, CMF-019, was patented but without a comprehensive description of its synthesis and a complete spectroscopic characterization of the intermediates. OBJECTIVE: Here, a detailed preparation of CMF-019 through a modified and improved synthetic pathway is described. METHOD: In particular, the benzimidazole ring in 7 was tailored by the condensation of methyl 3- amino-4-(pentan-3-ylamino)benzoate (4) with (thiophene-2-yl)acetimidate salt 6. Saponification of 7 and the subsequent condensation of the free acid 8 with the corresponding enantiopure ß-amino acid methyl ester generated methyl (S)-5-methyl-3-{1-(pentan-3-yl)-2-(thiophen-2-ylmethyl)-1Hbenzo[ d]imidazole-5-carboxamido}hexanoate (9). Hydrolysis of the latter with KOH in THF/water, followed by HPLC-purification, afforded the desired product, CMF-019 (potassium salt) 10. RESULTS & CONCLUSION: The approach reported herein enables preparation of 10 at a total yield of 12% over seven linear steps. Additionally, it does not require applying expensive designated microwave reactors and high-pressure hydrogenators. Thus, the elaborate synthesis provides a latent availability of potent agonist 10 for further exploring the physiologically essential apelin-APJ system.

High-Performance Cells Containing Lithium Metal Anodes, LiNi0.6Co0.2Mn0.2O2 (NCM 622) Cathodes, and Fluoroethylene Carbonate-Based Electrolyte Solution with Practical Loading.

We report on the highly stable lithium metal|LiNi0.6Co0.2Mn0.2O2 (NCM 622) cells with practical electrodes' loading of 3.3 mA h g-1, which can undergo many hundreds of stable cycles, demonstrating high rate capability. A key issue was the use of fluoroethylene carbonate (FEC)-based electrolyte solutions (1 M LiPF6 in FEC/dimethyl carbonate). Li|NCM 622 cells can be cycled at 1.5 mA cm-2 for more than 600 cycles, whereas symmetric Li|Li cells demonstrate stable performance for more than 1000 cycles even at higher areal capacity and current density. We attribute the excellent performance of both Li|NCM and Li|Li cells to the formation of a stable and efficient solid electrolyte interphase (SEI) on the surface of the Li metal electrodes cycled in FEC-based electrolyte solutions. The composition of the SEI on the Li and the NCM electrodes is analyzed by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. A drastic capacity fading of Li|NCM cells is observed, followed by spontaneous capacity recovery during prolonged cycling. This phenomenon depends on the current density and the amount of the electrolyte solution and relates to kinetic limitations because of SEI formation on the Li anodes in the FEC-based electrolyte solution.

Structurally Simple, Readily Available Peptidomimetic 1-Benzyl-5-methyl-4-( n-octylamino)pyrimidin-2(1 H)-one Exhibited Efficient Cardioprotection in a Myocardial Ischemia (MI) Mouse Model.

TLR4, a member of the Toll-like receptor (TLR) family, serves as a pattern recognition receptor in the innate immune response to microbial pathogens. TLR4 also regulates the inflammatory reaction to ischemic injury in the heart. The TRIF-related adaptor molecule (TRAM) is an adapter that recruits the Toll/interleukin 1 receptor (TIR) domain, which contains adapter-inducing IFN-ß (TRIF), to activate TLR4, following TRIF-dependent cytokine gene transcription. On the basis of a known TRAM-derived decoy peptide, 10 of its peptidomimetics were synthesized. One of them, 1-benzyl-5-methyl-4-( n-octylamino)pyrimidin-2(1 H)-one (21), exhibited high potency and efficacy in vitro. In vitro results and in silico analysis provided evidence for the possible direct interaction of 21 with the TLR4 complex. Administered in mice, 21 was able to block the pathophysiological manifestation of MI, restoring the concomitant tissue damage, with a 100% survival rate. Thus, inhibition of TLR4-mediated inflammation in postischemic myocardium could be used as an approach for developing cardioprotective drugs.

Shedding Light on the Oxygen Reduction Reaction Mechanism in Ether-Based Electrolyte Solutions: A Study Using Operando UV-Vis Spectroscopy.

Using UV-vis spectroscopy in conjunction with various electrochemical techniques, we have developed a new effective operando methodology for investigating the oxygen reduction reactions (ORRs) and their mechanisms in nonaqueous solutions. We can follow the in situ formation and presence of superoxide moieties during ORR as a function of solvent, cations, anions, and additives in the solution. Thus, using operando UV-vis spectroscopy, we found evidence for the formation of superoxide radical anions during oxygen reduction in LiTFSI/diglyme electrolyte solutions. Nitro blue tetrazolium (NBT) was used to indicate the presence of superoxide moieties based on its unique spectral response. Indeed, the spectral response of NBT containing solutions undergoing ORR could provide a direct indication for the level of association of the Li cations with the electrolyte anions.

The importance of solvent selection in Li-O2 cells.

We have examined the effect of glyme selection on the cycling behavior of Li-O2 cells. We conclude that diglyme is the optimal solvent for prolonged cycling. We have also focused on the effect of electrolyte solution instability as compared to other cell components.

Feasibility of Full (Li-Ion)-O2 Cells Comprised of Hard Carbon Anodes.

Aprotic Li-O2 battery is an exciting concept. The enormous theoretical energy density and cell assembly simplicity make this technology very appealing. Nevertheless, the instability of the cell components, such as cathode, anode, and electrolyte solution during cycling, does not allow this technology to be fully commercialized. One of the intrinsic challenges facing researchers is the use of lithium metal as an anode in Li-O2 cells. The high activity toward chemical moieties and lack of control of the dissolution/deposition processes of lithium metal makes this anode material unreliable. The safety issues accompanied by these processes intimidate battery manufacturers. The need for a reliable anode is crucial. In this work we have examined the replacement of metallic lithium anode in Li-O2 cells with lithiated hard carbon (HC) electrodes. HC anodes have many benefits that are suitable for oxygen reduction in the presence of solvated lithium cations. In contrast to lithium metal, the insertion of lithium cations into the carbon host is much more systematic and safe. In addition, with HC anodes we can use aprotic solvents such as glymes that are suitable for oxygen reduction applications. By contrast, lithium cations fail to intercalate reversibly into ordered carbon such as graphite and soft carbons using ethereal electrolyte solutions, due to detrimental co-intercalation of solvent molecules with Li ions into ordered carbon structures. The hard carbon electrodes were prelithiated prior to being used as anodes in the Li-O2 rechargeable battery systems. Full cells containing diglyme based solutions and a monolithic carbon cathode were measured by various electrochemical methods. To identify the products and surface films that were formed during cells operation, both the cathodes and anodes were examined ex situ by XRD, FTIR, and electron microscopy. The HC anodes were found to be a suitable material for (Li-ion)-O2 cell. Although there are still many challenges to tackle, this study offers a more practical direction for this promising battery technology and sets up a platform for further systematic optimization of its various components.

Mechanistic Role of Li⁺ Dissociation Level in Aprotic Li-O2 Battery.

The kinetics and thermodynamics of oxygen reduction reactions (ORR) in aprotic Li electrolyte were shown to be highly dependent on the surrounding chemical environment and electrochemical conditions. Numerous reports have demonstrated the importance of high donor number (DN) solvents for enhanced ORR, and attributed this phenomenon to the stabilizing interactions between the reduced oxygen species and the solvent molecules. We focus herein on the often overlooked effect of the Li salt used in the electrolyte solution. We show that the level of dissociation of the salt used plays a significant role in the ORR, even as important as the effect of the solvent DN. We clearly show that the salt used dictates the kinetics and thermodynamic of the ORR, and also enables control of the reduced Li2O2 morphology. By optimizing the salt composition, we have managed to demonstrate a superior ORR behavior in diglyme solutions, even when compared to the high DN DMSO solutions. Our work paves the way for optimization of various solvents with reasonable anodic and cathodic stabilities, which have so far been overlooked due to their relatively low DN.

Catalytic Behavior of Lithium Nitrate in Li-O2 Cells.

The development of a successful Li-O2 battery depends to a large extent on the discovery of electrolyte solutions that remain chemically stable through the reduction and oxidation reactions that occur during cell operations. The influence of the electrolyte anions on the behavior of Li-O2 cells was thought to be negligible. However, it has recently been suggested that specific anions can have a dramatic effect on the chemistry of a Li-O2 cell. In the present paper, we describe how LiNO3 in polyether solvents can improve both oxygen reduction (ORR) and oxygen evolution (OER) reactions. In particular, the nitrate anion can enhance the ORR by enabling a mechanism that involves solubilized species like superoxide radicals, which allows for the formation of submicronic Li2O2 particles. Such phenomena were also observed in Li-O2 cells with high donor number solvents, such as dimethyl sulfoxide dimethylformamide (DMF) and dimethylacetamide (DMA). Nevertheless, their instability toward oxygen reduction, lithium metals, and high oxidation potentials renders them less suitable than polyether solvents. In turn, using catalysts like LiI to reduce the OER overpotential might enhance parasitic reactions. We show herein that LiNO3 can serve as an electrolyte and useful redox mediator. NO2(-) ions are formed by the reduction of nitrate ions on the anode. Their oxidation forms NO2, which readily oxidizes to Li2O2. The latter process moves the OER overpotentials down into a potential window suitable for polyether solvent-based cells. Advanced analytical tools, including in situ electrochemical quartz microbalance (EQCM) and ESR plus XPS, HR-SEM, and impedance spectroscopy, were used for the studies reported herein.

Superoxide organic chemistry within the liposomal bilayer, part II: a correlation between location and chemistry.

Coumarin ester derivatives 1, substituted at C-4 and/or C-12 with alkyl chains, were synthesized and intercalated within DMPC liposomal bilayers. By correlating the 13C chemical shift with medium polarity [E(T)(30)], the relative location of these substrates within the liposomal bilayer was determined. The length of the alkyl chain substituents clearly influences the lipophilicity of the substrates and their location and orientation within the liposome: Superoxide readily saponifies the C-12 esteric linkage of 1, when this reaction site lies in a polar region of the liposome (E(T)(30) > 45 kcal/mol), to give the corresponding 7-hydroxy coumarin derivatives 2. However, when C-12 lies deeper and is hence less available to O(2)(*-), the lactonic carbon C-2, which lies in a shallower region (E(T)(30) = 43-49), is the preferred site for superoxide-mediated cleavage. When coumarin 1 is disubstituted with long chains at both C-12 and C-4, these derivatives lie deep within the bilayer and react only slowly with O(2)(*-). These results indicate there is indeed a correlation between location within the bilayer and substrate reactivity. Contrary to the suggestion of Dix and Aikens (Chem. Res. Toxicol.6:2-18; 1993) superoxide can penetrate deep within the liposomal bilayer. Nevertheless, its concentration drops precipitously (to approximately 16% of what it is near the interface) below E(T) values of 38, thereby precluding substantial reaction with many highly lipophilic substrates. This work also confirms the findings of others that reactions of small oxy-radicals occur within cellular membranes and appear to be of significant biological importance.