Application of acoustic emission on the characterization of fracture in textile reinforced cement laminates.

This work studies the acoustic emission (AE) behavior of textile reinforced cementitious (TRC) composites under flexural loading. The main objective is to link specific AE parameters to the fracture mechanisms that are successively dominating the failure of this laminated material. At relatively low load, fracture is initiated by matrix cracking while, at the moment of peak load and thereafter, the fiber pull-out stage is reached. Stress modeling of the material under bending reveals that initiation of shear phenomena can also be activated depending on the shape (curvature) of the plate specimens. Preliminary results show that AE waveform parameters like frequency and energy are changing during loading, following the shift of fracturing mechanisms. Additionally, the AE behavior of specimens with different curvature is very indicative of the stress mode confirming the results of modeling. Moreover, AE source location shows the extent of the fracture process zone and its development in relation to the load. It is seen that AE monitoring yields valuable real time information on the fracture of the material and at the same time supplies valuable feedback to the stress modeling.

Ultrasonic characterization of the fiber-matrix interfacial bond in aerospace composites.

The properties of advanced composites rely on the quality of the fiber-matrix bonding. Service-induced damage results in deterioration of bonding quality, seriously compromising the load-bearing capacity of the structure. While traditional methods to assess bonding are destructive, herein a nondestructive methodology based on shear wave reflection is numerically investigated. Reflection relies on the bonding quality and results in discernable changes in the received waveform. The key element is the "interphase" model material with varying stiffness. The study is an example of how computational methods enhance the understanding of delicate features concerning the nondestructive evaluation of materials used in advanced structures.

Damage accumulation in cyclically-loaded glass-ceramic matrix composites monitored by acoustic emission.

Barium osumilite (BMAS) ceramic matrix composites reinforced with SiC-Tyranno fibers are tested in a cyclic loading protocol. Broadband acoustic emission (AE) sensors are used for monitoring the occurrence of different possible damage mechanisms. Improved use of AE indices is proposed by excluding low-severity signals based on waveform parameters, rather than only threshold criteria. The application of such improvements enhances the accuracy of the indices as accumulated damage descriptors. RA-value, duration, and signal energy follow the extension cycles indicating moments of maximum or minimum strain, while the frequency content of the AE signals proves very sensitive to the pull-out mechanism.

Detecting the activation of a self-healing mechanism in concrete by acoustic emission and digital image correlation.

Autonomous crack healing in concrete is obtained when encapsulated healing agent is embedded into the material. Cracking damage in concrete elements ruptures the capsules and activates the healing process by healing agent release. Previously, the strength and stiffness recovery as well as the sealing efficiency after autonomous crack repair was well established. However, the mechanisms that trigger capsule breakage remain unknown. In parallel, the conditions under which the crack interacts with embedded capsules stay black-box. In this research, an experimental approach implementing an advanced optical and acoustic method sets up scopes to monitor and justify the crack formation and capsule breakage of concrete samples tested under three-point bending. Digital Image Correlation was used to visualize the crack opening. The optical information was the basis for an extensive and analytical study of the damage by Acoustic Emission analysis. The influence of embedding capsules on the concrete fracture process, the location of capsule damage, and the differentiation between emissions due to capsule rupture and crack formation are presented in this research. A profound observation of the capsules performance provides a clear view of the healing activation process.

Rupture of anterior cruciate ligament monitored by acoustic emission.

The scope of this study is to relate the acoustic emission (AE) during rupture of human soft tissue (anterior cruciate ligament, ACL) to the mechanisms leading to its failure. The cumulative AE activity highlights the onset of serious damage, while other parameters, show repeatable tendencies, being well correlated with the tissue's mechanical behavior. The frequency content of AE signals increases throughout the experiment, while other indices characterize between different modes of failure. Results of this preliminary study show that AE can shed light into the failure process of this tissue, and provide useful data on the ACL reconstruction.

Acoustic emission monitoring of degradation of cross ply laminates.

The scope of this study is to relate the acoustic activity of damage in composites to the failure mechanisms associated with these materials. Cross ply fiber reinforced composites were subjected to tensile loading with recording of their acoustic activity. Acoustic emission (AE) parameters were employed to monitor the transition of the damage mechanism from transverse cracking (mode I) to delamination (mode II). Wave propagation measurements in between loading steps revealed an increase in the relative amplitude of the propagated wave, which was attributed to the development of delamination that confined the wave to the top longitudinal plies of the composite.

Experimental study of wave dispersion and attenuation in concrete.

Results from an experimental study concerning wave propagation in cementitious materials are presented in this paper. Narrow band pulses at several frequencies were introduced into specimens of cement paste, mortar and concrete allowing direct measurement of longitudinal wave velocities and amplitude for each frequency. It is shown that aggregate content play an important role in wave propagation increasing considerably the wave velocity, while the aggregate size seems to control the attenuation observed. Slight velocity variations observed with frequency are discussed in relation to the degree of inhomogeneity of the materials.

An iterative effective medium approximation (IEMA) for wave dispersion and attenuation predictions in particulate composites, suspensions and emulsions.

In the present work we deal with the scattering dispersion and attenuation of elastic waves in different types of nonhomogeneous media. The iterative effective medium approximation based on a single scattering consideration, for the estimation of wave dispersion and attenuation, proposed in Tsinopoulos et al., [Adv. Compos. Lett. 9, 193-200 (2000)] is examined herein not only for solid components but for liquid suspensions as well. The iterations are conducted by means of the classical relation of Waterman and Truell, while the self-consistent condition proposed by Kim et al. [J. Acoust. Soc. Am. 97, 1380-1388 (1995)] is used for the convergence of the iterative procedure. The single scattering problem is solved using the Ying and Truell formulation, which with a minor modification can accommodate the solution of scattering on inclusions in liquid. Theoretical results for several different systems of particulates and suspensions are presented being in excellent agreement with experimental data taken from the literature.