RESUMO
Ti-doped ZrO2 is a chemically stable and persistent luminescence material. Doping and co-doping is an effective approach for improving the afterglow properties of phosphors, but few studies have investigated the co-doping of ZrO2:Ti systems. This study aimed to synthesize ZrO2:Ti, M (M = Ca2+, Y3+, Ti single-doped, Nb5+, W6+) and evaluate the luminescent properties of the resulting materials, with a specific focus on the relationship between trap depth and the valence state of the co-doped cation. The ratio of the luminescent center to co-doped ion was optimized using the combinatorial approach, where 0.09 mol % Ti led to the best afterglow duration. The emission decay curves of each co-doped sample differed significantly, where a change in curvature was observed in the Ti single-doped and W6+ co-doped samples due to the presence of multiple traps. From the thermoluminescence glow curves, the trap originating in an oxygen vacancy with a peak at around 270 K was observed. The trap depth was dependent on electrostatic interactions between the trapped electrons and their surrounding cations, and thus related to the valence of the co-dopant. Overall, co-doping with high-valent cations led to improved afterglow duration.
RESUMO
Perovskite oxides hosting ferroelectricity are particularly important materials for modern technologies. The ferroelectric transition in the well-known oxides BaTiO3 and PbTiO3 is realized by softening of a vibration mode in the cubic perovskite structure. For most perovskite oxides, octahedral-site tilting systems are developed to accommodate the bonding mismatch due to a geometric tolerance factor t = (A-O)/[â2(B-O)] < 1. In the absence of cations having lone-pair electrons, e.g., Bi3+ and Pb2+, all simple and complex A-site and B-site ordered perovskite oxides with a t < 1 show a variety of tilting systems, and none of them become ferroelectric. The ferroelectric CaMnTi2O6 oxide is, up to now, the only one that breaks this rule. It exhibits a columnar A-site ordering with a pronounced octahedral-site tilting and yet becomes ferroelectric at Tc ≈ 650 K. Most importantly, the ferroelectricity at T < Tc is caused by an order-disorder transition instead of a displacive transition; this character may be useful to overcome the critical thickness problem experienced in all proper ferroelectrics. Application of this new ferroelectric material can greatly simplify the structure of microelectronic devices. However, CaMnTi2O6 is a high-pressure phase obtained at 7 GPa and 1200 °C, which limits its application. Here we report a new method to synthesize a gram-level sample of ferroelectric Ca2-xMnxTi2O6, having the same crystal structure as CaMnTi2O6 and a similarly high Curie temperature. The new finding paves the way for the mass production of this important ferroelectric oxide. We have used neutron powder diffraction to identify the origin of the peculiar ferroelectric transition in this double perovskite and to reveal the interplay between magnetic ordering and the ferroelectric displacement at low temperatures.
RESUMO
A polar LiNbO3 (LN)-type oxide LiSbO3 was synthesized by a high-temperature heat treatment under a pressure of 7.7 GPa and found to exhibit ferroelectricity. The crystal structural refinement using the data of synchrotron powder X-ray diffraction and neutron diffraction and the electronic structure calculation of LN-type LiSbO3 suggest a covalent-bonding character between Sb and O. When comparing the distortion of BO6 in LN-type ABO3, the distortions of SbO6 in LiSbO3 and SnO6 in ZnSnO3, which included a B cation with a d10 electronic configuration, were smaller than those of BO6 in LN-type oxides having the second-order Jahn-Teller active B cation, e.g., LiNbO3 and ZnTiO3. The temperature dependence of the lattice parameters, second harmonic generation, dielectric permittivity, and differential scanning calorimetry made it clear that a second-order ferroelectric-paraelectric phase transition occurs at a Curie temperature of Tc = 605 ± 10 K in LN-type LiSbO3. Further, first-principles density functional theory calculation suggested that perovskite-type LiSbO3 is less stable than LN-type LiSbO3 under even high pressure, and the ambient phase of LiSbO3 directly transforms to LN-type LiSbO3 under high pressure. The phase stability of LN-type LiSbO3 and the polar and ferroelectric properties are rationalized by the covalent bonding of Sb-O and the relatively weak Coulomb repulsion between Li+ and Sb5+.
RESUMO
Perovskite PbCoO3 synthesized at 12 GPa was found to have an unusual charge distribution of Pb2+Pb4+3Co2+2Co3+2O12 with charge orderings in both the A and B sites of perovskite ABO3. Comprehensive studies using density functional theory (DFT) calculation, electron diffraction (ED), synchrotron X-ray diffraction (SXRD), neutron powder diffraction (NPD), hard X-ray photoemission spectroscopy (HAXPES), soft X-ray absorption spectroscopy (XAS), and measurements of specific heat as well as magnetic and electrical properties provide evidence of lead ion and cobalt ion charge ordering leading to Pb2+Pb4+3Co2+2Co3+2O12 quadruple perovskite structure. It is shown that the average valence distribution of Pb3.5+Co2.5+O3 between Pb3+Cr3+O3 and Pb4+Ni2+O3 can be stabilized by tuning the energy levels of Pb 6s and transition metal 3d orbitals.
RESUMO
A polar LiNbO3-type (LN-type) titanate ZnTiO3 has been successfully synthesized using ilmenite-type (IL-type) ZnTiO3 under high pressure and high temperature. The first principles calculation indicates that LN-type ZnTiO3 is a metastable phase obtained by the transformation in the decompression process from the perovskite-type phase, which is stable at high pressure and high temperature. The Rietveld structural refinement using synchrotron powder X-ray diffraction data reveals that LN-type ZnTiO3 crystallizes into a hexagonal structure with a polar space group R3c and exhibits greater intradistortion of the TiO6 octahedron in LN-type ZnTiO3 than that of the SnO6 octahedron in LN-type ZnSnO3. The estimated spontaneous polarization (75 µC/cm(2), 88 µC/cm(2)) using the nominal charge and the Born effective charge (BEC) derived from density functional perturbation theory, respectively, are greater than those of ZnSnO3 (59 µC/cm(2), 65 µC/cm(2)), which is strongly attributed to the great displacement of Ti from the centrosymmetric position along the c-axis and the fact that the BEC of Ti (+6.1) is greater than that of Sn (+4.1). Furthermore, the spontaneous polarization of LN-type ZnTiO3 is greater than that of LiNbO3 (62 µC/cm(2), 76 µC/cm(2)), indicating that LN-type ZnTiO3, like LiNbO3, is a candidate ferroelectric material with high performance. The second harmonic generation (SHG) response of LN-type ZnTiO3 is 24 times greater than that of LN-type ZnSnO3. The findings indicate that the intraoctahedral distortion, spontaneous polarization, and the accompanying SHG response are caused by the stabilization of the polar LiNbO3-type structure and reinforced by the second-order Jahn-Teller effect attributable to the orbital interaction between oxygen ions and d(0) ions such as Ti(4+).
RESUMO
LiNbO(3)-type MnMO(3) (M = Ti, Sn) were synthesized under high pressure and temperature; their structures and magnetic, dielectric, and thermal properties were investigated; and their relationships were discussed. Optical second harmonic generation and synchrotron powder X-ray diffraction measurements revealed that both of the compounds possess a polar LiNbO(3)-type structure at room temperature. Weak ferromagnetism due to canted antiferromagnetic interaction was observed at 25 and 50 K for MnTiO(3) and MnSnO(3), respectively. Anomalies in the dielectric permittivity were observed at the weak ferromagnetic transition temperature for both the compounds, indicating the correlation between magnetic and dielectric properties. These results indicate that LiNbO(3)-type compounds with magnetic cations are new candidates for multiferroic materials.
RESUMO
Automated structural analysis techniques are required to accelerate materials research. In this study, we developed an algorithm to automate Rietveld analysis, which is a method for crystal structure refinement using powder diffraction patterns. This algorithm features the repeated generation of a set of initial values, followed by one-shot refinement. Accurate results were obtained without any strategy for the sequence of refinement, as is often used in manual analysis. Implementation and testing of the automated algorithm provided fitting results that were comparable to those of manual analysis, even when inaccurate initial values for structural parameters were input. Moreover, the much shorter time was required for the developed automatic analysis method than for manual analysis. The developed method will likely facilitate the analysis of large amounts of diffraction data, allowing the accumulation of structural data that can enhance the efficacy of materials research.
Assuntos
Algoritmos , Ciência dos Materiais/métodos , Automação , Cristalografia por Raios X , Estrutura Molecular , Difração de Raios XRESUMO
We propose to minimize the sampling time for high-throughput measurements of powder X-ray diffraction (XRD) and X-ray absorption fine structure (XAFS) in synchrotron radiation. The conventional synchrotron radiation powder X-ray diffraction method requires filling of a capillary tube, but a structure-refining diffraction pattern could be obtained by transferring the crushed powder to a tape and rotating the cassette-tape tool by ±5° around the sample position. XAFS spectra could also be measured with the sample attached to the tape. The time required for sample preparation was greatly reduced, which made high-throughput experiments with powders in synchrotron radiation experiments more accessible.
Assuntos
Ensaios de Triagem em Larga Escala , Síncrotrons , Ensaios de Triagem em Larga Escala/instrumentação , Difração de Pó/instrumentação , Espectroscopia por Absorção de Raios X/instrumentaçãoRESUMO
Metal oxide semiconductor gas sensors have been widely studied for the selective detection of various gases with trace concentrations. The identification of the reaction scheme governing the gas sensing response is crucial for further development; however, the mechanism of ethanol (EtOH) gas sensing by ZnO is still controversial despite being one of the most intensively studied target gas and sensing material combinations. In this work, for the first time, the detailed mechanism of EtOH sensing by ZnO is studied by using a bulk single-crystalline substrate, which has a well-defined stoichiometry and atomic arrangement, as the sensing material. The sensing response is substantial on the ZnO substrate even with a millimeter-size thickness, and it becomes larger with resistance of the substrate. The large sensing response is described in terms of the adsorption/desorption of the oxygen species on the substrate surface, namely, oxygen ionosorption. The valence state of the ionosorbed oxygen involved in EtOH sensing is identified to be O2- regardless of the temperature. The increase in the sensing response with the temperature is attributed to the enhanced oxidation rate of the EtOH molecule on the surface as analyzed by pulsed-jet temperature-programmed desorption mass spectrometry, which has been newly developed for analyzing surface reactions in simulated working conditions.
RESUMO
Molybdenum-doped zirconium tungstate (ZrW2-xMoxO8) has been widely studied because of its large isotropic coefficient of negative thermal expansion (NTE). However, low density and poor sinterability limit its production and application. In this study, relative density greater than 90% single-phase ZrW2-xMoxO8 (0.0 ≤ x ≤ 1.0) sintered bodies were fabricated by spark plasma sintering (500â»600 °C for 10 min) using ZrW2-xMoxO7(OH)2·2H2O precursor powders as the starting material. High-temperature X-ray diffraction and thermomechanical analysis were used to investigate the change in the orderâ»disorder phase transition temperature of the sintered materials; it gradually dropped from 170 °C at x = 0.0 to 78 °C at x = 0.5, and then to below room temperature at x ≥ 0.7. In addition, all sintered bodies exhibited NTE behavior. The NTE coefficient was controllable by changing the x value as follows: from -7.85 × 10-6 °C-1 (x = 0) to -9.01 × 10-6 °C-1 (x = 0.6) and from -3.22 × 10-6 °C-1 (x = 0) to -2.50 × 10-6 °C-1 (x = 1.0) before and after the phase transition, respectively. Rietveld structure refinement results indicate that the change in the NTE coefficient can be straightforwardly traced to the thermodynamic instability of the terminal oxygen atoms, which only have one coordination.