RESUMO
Biochar is a carbonaceous solid that is prepared through thermo-chemical decomposition of biomass under an inert atmosphere. The present study compares the performance of biochar prepared from Peanut shell, coconut shell and walnut shell in dual chamber microbial fuel cell. The physicochemical and electrochemical analysis of biochar reveals that prepared biochar is macroporous, amorphous, biocompatible, and electrochemically conductive. Polarization studies show that Peanut shell biochar (PSB) exhibited a maximum power density of 165 mW/m2 followed by Coconut shell biochar (CSB) Activated Charcoal (AC) and Walnut shell biochar (WSB). Enhanced power density of PSB was attributed to its surface area and suitable pore size distribution which proved conducive for biofilm formation. Furthermore, the high electrical capacitance of PSB improved the electron transfer between microbes and anode.
Assuntos
Fontes de Energia Bioelétrica , Carvão Vegetal , Eletrodos , Carvão Vegetal/química , Cocos , Juglans , Arachis , BiofilmesRESUMO
In the present study, biosynthesized ZnO nanoparticles in food wastewater extract (FWEZnO NPs) was used in the photocatalytic degradation of real samples of printing ink wastewater. FWEZnO NPs were prepared using green synthesis methods using a composite food waste sample (2 kg) consisted of rice 30%, bread 20 %, fruits 10 %, chicken 10 %, lamb 10%, and vegetable 20%. The photocatalysis process was optimized using response surface methodology (RSM) as a function of time (15-180 min), pH 2-10 and FWEZnO NP (20-120 mg/100 mL), while the print ink effluent after each treatment process was evaluated using UV-Vis-spectrophotometer. The behaviour of printing ink wastewater samples for photocatalytic degradation and responses for independent factors were simulated using feed-forward neural network (FFNN). FWEZnO NPs having 62.48 % of the purity with size between 18 and 25 nm semicrystalline nature. The main functional groups were -CH, CH2, and -OH, while lipid, carbon-hydrogen stretching, and amino acids were the main component in FWEZnO NP, which contributed to the adsorption of ink in the initial stage of photocatalysis. The optimal conditions for printing ink wastewater were recorded after 17 min, at pH 9 and with 20 mg/100 mL of FWEZnO NPs, at which the decolorization was 85.62 vs. 82.13% of the predicted and actual results, respectively, with R2 of 0.7777. The most significant factor in the photocatalytic degradation was time and FWEZnO NPs. The FFNN models revealed that FWEZnO NPs exhibit consistency in the next generation of data (large-scale application) with an low errors (R2 0.8693 with accuracy of 82.89%). The findings showing a small amount of catalyst is needed for effective breakdown of dyes in real samples of printing ink wastewater.
Assuntos
Tinta , Redes Neurais de Computação , Águas Residuárias , Óxido de Zinco , Óxido de Zinco/química , Águas Residuárias/química , Nanopartículas Metálicas/química , Poluentes Químicos da Água/análise , Catálise , Impressão , Eliminação de Resíduos Líquidos/métodos , AlimentosRESUMO
Metals are non-biodegradable and recurrent in the environs. Heavy metals tolerant fungiwere isolated from refuse dumpsite soil using pour plate method. These fungiwere identified as Aspergillus niger, Penicillium chrysogenumandRhizomucor sp. The fungal isolates were screened for cadmium (Cd), lead (Pb) and zinc (Zn) with concentration of 200ppm, 400ppm and 600ppm. Aspergillus nigerand Penicillium chrysogenumshowed high tolerance for the metals in contrast to the control. The fungiwith high tolerance were used for biosorption study. However, Penicillium chrysogenumshowed higher lead removal or biosorption potential of 1.07ppm, 3.35ppm and 4.19ppm as compared with Aspergillus nigerwith lead removal of 0.67ppm, 3.11ppm and 3.79ppm at 5th, 10thand 15thday respectively. One-way Analysis of Variance was used to interpret the data generated from the biosorption study which revealed that there was no significant different (p>0.05)between the lead removal of Aspergillus nigerandPenicillium chrysogenumon the 5thday but there was significant difference (p<0.05)in the lead removal of Aspergillus nigerand Penicillium chrysogenumon the 10thand 15thday. This study suggests the use of these fungal isolates for removal and biotreatment of heavy metal contaminated and polluted environment.