Analysis of recurrent esthetic dental proportion of natural maxillary anterior teeth: A systematic review.

STATEMENT OF PROBLEM: The recurrent esthetic dental (RED) proportion has been a benchmark for the rehabilitation of the maxillary anterior teeth of North American patients. While it has been evaluated in other populations, the global application of RED proportions in the rehabilitation of maxillary anterior teeth is unclear. PURPOSE: The purpose of this systematic review was to examine the existing evidence on dental proportion to evaluate the existence of RED proportions in the esthetic smile in different geographic regions. MATERIAL AND METHODS: A systematic search was conducted by reviewing different databases. The focused question was "Does RED proportion exist in esthetically pleasing smiles in different populations around the world?" The search included articles with a combination of MeSH keywords based on dental proportion from January 2000 to July 2020. The titles and abstracts were identified by using a search protocol. Full text of the articles was independently evaluated. The systematic review was modified to summarize the relevant data. The general characteristics, outcomes, and quality of studies were reviewed and analyzed systematically. RESULTS: Seventeen studies were selected from the reviewed articles. Three studies were conducted in Europe, 10 in South Asia, and 4 in Western Asia. Eleven studies found that the mean perceived ratio of anterior teeth was not constant when progressing distally. Five studies reported that the ratio was constant in a small percentage of their populations, and 1 suggested that the ratio was constant if it remains between 60% and 80%. The central-to-LI and Ca-to-LI proportion values were not constant. Overall, the Ca-to-LI proportion values were higher than the central-to-LI proportions. CONCLUSIONS: RED proportions were not found in the successive widths of maxillary anterior teeth among the reviewed data from different geographic regions. RED proportions are not the only standard for restoring esthetic smiles worldwide, and anterior tooth proportions differ among populations based on their race and ethnicity.

Marginal Misfit of 3D-Printed (Selective Laser Sintered), CAD-CAM and Lost Wax Technique Cobalt Chromium Copings with Shoulder and Chamfer Finish Lines: An In-Vitro Study.

Background and Objectives: The aim was to compare the Misfit of 3D-Printed, Selective laser melting (SLM), milled (Computer aided design-Computer aided manufacture CAD-CAM) and Lost wax technique (LWT) fabricated Cobalt chromium (CoCr) alloy copings on shoulder (SH), radial shoulder (R-SH) and chamfer (CH) finish line configuration. Materials and Methods: Ninety resin, second maxillary premolar teeth were prepared for metal-ceramic crowns, equally divided into (n = 30) SH, R-SH and CH margin preparations. For each preparation design (SH, R-SH and CH), CoCr copings were prepared using SLM, CAD-CAM and LWT. This resulted in nine study groups with 10 CoCr copings each. The marginal misfit of specimens was assessed with a high-resolution digital microscope. Misfit was evaluated in vertical and horizontal dimensions in µm. Data were analyzed using ANOVA and a post hoc multiple comparisons test. Results: For vertical misfit, the highest was observed in SLM samples with chamfer margin (167.96 ± 24.1), and the least was shown by CAD-CAM samples with radial shoulder (58.8 ± 12.53). CAD-CAM and shoulder margins showed the least vertical misfit. For horizontal misfit, the maximum was observed in SLM samples with shoulder margin (137.94 ± 37.85) and the least by LWT samples with chamfer (89.38 ± 14.81). Chamfer margins and LWT samples showed the least horizontal misfit among the group samples. Fabrication technique and finish line design play a critical role in reducing the marginal misfit of CoCr copings. Conclusions: For vertical misfit, SLM copings showed poor outcomes compared to CAD-CAM specimens, however comparable outcomes to Cast specimens. SLM copings showed comparable horizontal misfit outcomes to CAD-CAM specimens and low misfit compared to Cast copings, respectively. Vertical misfit was low with shoulder margins, and horizontal misfit was better with chamfer marginal configuration.

Prosocial effects of prolactin in male rats: Social recognition, social approach and social learning.

Prolactin (PRL) and oxytocin (OT) are pituitary hormones essential for lactation, but also promote sexual behavior. OT stimulates social behaviors, such as recognition, approach, and learning, but less is known about PRL in these behaviors. Since PRL and OT have complementary functions in reproduction, we hypothesized that PRL increases social recognition, approach, and learning. Male Long-Evans rats received ovine PRL (oPRL; 0.5, 2.0 or 5.0mg/kg), the PRL antagonist bromocriptine (0.1, 3.0 or 5.0mg/kg) or saline 20 mins before testing for recognition of familiar vs. unfamiliar stimulus males. Saline controls preferred the unfamiliar male (p<0.05), while bromocriptine blocked this preference. oPRL did not increase preference. To measure social approach, we determined if PRL restores approach 2h after defeat by an aggressive male. Defeated rats avoided the aggressive male. 2mg/kg oPRL, before or after defeat, restored approach towards the aggressive male (p<0.05). In non-defeated rats, oPRL or 3mg/kg bromocriptine had no effect. To determine if PRL increases social learning, we tested social transmission of food preference. Rats choose between two unfamiliar flavors, one of which they have previously been exposed to through interaction with a demonstrator rat. Vehicle controls preferred chow with the demonstrated flavor over the novel flavor. oPRL-treated rats were similar. Bromocriptine-treated rats failed to show a preference. When tested one week later, only oPRL-treated rats preferred the demonstrated flavor. The results suggest that PRL is required for social recognition and learning, and that increasing PRL enhances social memory and approach, similar to OT.

Efficacy of contemporary agents on disinfection and surface roughness of polyetheretherketone implant abutments.

AIM: The present study was designed to estimate the disinfection and surface roughness (Ra) of colonized (E. coli, C. albicans, S.aureus, and S. mutans) PEEK implant abutment disinfected with PDT, chemical, and herbal agents. MATERIAL AND METHODS: The American Type Culture Collection (ATCC) inoculated E.coli, C.albicans, S.mutans, and S.aureus in an in-vitro scenario using 60 PEEK implant abutment samples provided by the manufacturer. Following that, the samples were distributed in four disinfection methods categories - group 1: 5 mM Rose Bengal PS (RB), group 2: ultrasonic disinfection (UD), group 3: 2% glutaraldehyde (GaH), and group 4: tea tree oil (TTO). To scrutinize the data and compare the means and standard deviations of CFU/mL (log10) for exposed E. coli, Candida albicans, S.aureus, and S.mutans, a two-way ANOVA and Tukey's multiple comparison test were performed. RESULTS: Specimens treated with 2% GaH, UD, and TTO validated a significant reduction in E. coli, C. albicans, S aureus, and S. mutans CFU/mL (log10) colonies. Intragroup assessment designated that there is no reduction in CFU/mL (log10) of E.coli and C.albicans when PEEK implant abutment specimens are irradiated with 5 Mm RB. A decline is seen in values of S. aureus, and S. mutans microbial strains on treatment with all four cleansers while the computation of C.albicans and E.coli colonies unveiled significant reduction with GaH, UD, and TTO except RB (p < 0.05). The results of Ra showed that PEEK fabricated implant abutment specimens, when treated with UD (3.472 ± 0.561 µm), displayed a significantly higher Ra value as compared to other analyzed cleansing methods. CONCLUSION: Disinfection with 2% glutaraldehyde and tea tree oil showed maximum antimicrobial efficacy and lower Ra values for PEEK implant abutments colonized with bacterial strains of E.coli, C.albicans, S.aureus, and S.mutans.

Management of Edentulous Microstomia Patient: A Case Report and Classification System.

Microstomia is an abnormally reduced oral aperture. In the literature, it is not classified by any particular size criteria, rather defined by its effects on function and esthetics. Prosthodontic management of edentulous patients with microstomia is a challenging task. Use of conventional methods for recording an impression and fabricating prosthesis is not effective in such patients. To fabricate well-fitting prosthesis, accuracy of impression recording important anatomic landmarks is essential. Formation of an exacting custom tray and diagnostic cast is critical for final impression accuracy. Provision of a well-fitting prosthesis in microstomia patient will restore esthetics, comfort, and function with oral and systemic patient wellbeing. This paper presents a case report of managing an edentulous microstomia patient with sectional removable prosthesis. Furthermore, it proposes a novel classification system for microstomia patients according to severity of the condition.

Modified photoactivated methylene blue-incorporated quartz particles for dentin disinfection: A scanning electron microscope and spectroscopic analysis.

The aim of this study was to synthesize methylene blue-incorporated quartz particles (MB@QP) and to investigate its anti-bactericidal properties. Methylene blue was incorporated inside QP and characterized for morphology and chemical structure using scanning electron microscope (SEM) and Fourier transformed infrared spectroscopy (FTIR). Specimens were randomly divided into experimental and control groups (n = 9/groups). The dentin specimen infected with Enterococcus faecalis was treated using different treatment modalities: Control groups: treatment with 5.25% of sodium hypochlorite (NaOCl) for 60 s; MB: treatment with 1 ml MB solution and incubated for 60 s; MB-PDT (photodynamic therapy): treatment with 1 ml MB solution followed by irradiation using diode laser for 60 s; MB-QP-PDT: specimens treated with MB@QP and irradiated by the diode laser for 60s, and Er,Cr:YSGG laser alone. MB@PDT therapy showed the highest efficacy in reducing the survival rate of E. faecalis (0.49%) in comparison to control NaOCl (0.78%) and Er,Cr:YSGG laser treatment (2.17%). Encapsulating MB into QP followed by the PDT significantly improved the bactericidal capacity and significantly reduced the bacterial survival rate to 0.11% (p < .05) compared to other groups. The combination of MB incorporated into QP and PDT could be an alternative treatment modality to conventional disinfection method for eliminating bacteria from the tooth dentin. RESEARCH HIGHLIGHTS: Quartz particles are potent in delivering the photosensitizer. Photoactivated MB@QP has a higher efficacy in eliminating bacteria from tooth dentin.

Use of Photosensitizer, Glutaraldehyde, alcohol and Ultrasonics in disinfection of polished and rough surfaces of self-curing polymethyl methacrylate denture base material.

AIM: To assess the effectiveness of chemical, ultrasonic and photodynamic therapy (PDT) mediated disinfection against in-vitro biofilms colonized with C. albicans, S. oralis, and S. aureus on surfaces of PMMA (polymethylmethacrylate) denture base material. MATERIALS AND METHODS: Fifty plates of PMMA were prepared with two different surface topography (rough and polished) analyzed by profilometry. Provenance culture (ATCC) of C. albicans, S. oralis, and S. aureus were inoculated on specimens and exposed to disinfection. The disinfection included Rosebengal (RB) 5 µM activated by a red LED, 2% glutaraldehyde, 70% Isopropyl alcohol, ultrasonic disinfection, and saline solution as a control. The antimicrobial efficacy was assessed by subsequently calculating viable counts after disinfection. The data were analyzed using analysis of variance (ANOVA) and Tukey's Post Hoc test. RESULTS: The unpolished surface demonstrated the highest average surface roughness As 5.32±0.36 (µm) and root mean square roughness Rr 7.22±0.81 (µm) compared to the polished surface. Intergroup comparison demonstrated polished and rough PMMA plate disinfected with rose bengal, glutaraldehyde and alcohol-based disinfection exhibited comparable reduction against C. albicans and S. oralis CFU/mL (log10) (p>0.05). Whereas, this reduction was significantly higher on the rough and polished surface of PMMA when disinfected using ultrasounds for 30 sec (p<0.05). Rose Bengal was the most effective method of disinfection against S. aureus both on polished (0.17±0.13) and rough (0.44±0.22) denture plates (p<0.05). CONCLUSION: The ultrasonic disinfection was most effective in reducing viable microbial counts. RB mediated PDT exhibited a more substantial reduction of the colonies of S.aureus.

Synergistic Effect of Bioactive Inorganic Fillers in Enhancing Properties of Dentin Adhesives-A Review.

Dentin adhesives (DAs) play a critical role in the clinical success of dental resin composite (DRC) restorations. A strong bond between the adhesive and dentin improves the longevity of the restoration, but it is strongly dependent on the various properties of DAs. The current review was aimed at summarizing the information present in the literature regarding the improvement of the properties of DAs noticed after the addition of bioactive inorganic fillers. From our search, we were able to find evidence of multiple bioactive inorganic fillers (bioactive glass, hydroxyapatite, amorphous calcium phosphate, graphene oxide, calcium chloride, zinc chloride, silica, and niobium pentoxide) in the literature that have been used to improve the different properties of DAs. These improvements can be seen in the form of improved hardness, higher modulus of elasticity, enhanced bond, flexural, and ultimate tensile strength, improved fracture toughness, reduced nanoleakage, remineralization of the adhesive-dentin interface, improved resin tag formation, greater radiopacity, antibacterial effect, and improved DC (observed for some fillers). Most of the studies dealing with the subject area are in vitro. Future in situ and in vivo studies are recommended to positively attest to the results of laboratory findings.

Assessment of Bond Integrity, Durability, and Degree of Conversion of a Calcium Fluoride Reinforced Dentin Adhesive.

Our study aimed to synthesize and compare the mechanical properties and dentin interaction of two adhesives; experimental adhesive (EA) and EA containing 5 wt.% calcium fluoride (CaF2) nano-crystals (CaF2 adhesive-CAFA). CaF2 nano-crystals were synthesized by reacting two solutions (containing calcium and fluoride) in a glass chamber using a heated air system. The EA was produced using a mix of monomers, photo-initiators, camphorquinone, and electron initiators. The synthesized CaF2 nano-crystals were centrifuged to guarantee that inside the adhesive there is homogenized dispersion of the filler particles. Their integration in the EA yielded two groups; Gp-1: EA (without CaF2, control) and Gp-2: (5 wt.% CaF2 containing adhesive, CAFA). Sixty teeth were prepared and set to form bonded specimens using the two adhesives. The CaF2 nano-crystals were irregularly shaped with an average particle size of 30-200 nm. The highest µTBS values were obtained for CAFA-non-thermocycled (NTC) samples (32.63 ± 3.15), followed by EA-NTC (31.80 ± 3.75) specimens. On thermocycling (TC), both adhesive groups presented lower µTBS values (CAFA-TC: 29.47 ± 3.33 and EA-TC: 24.04 ± 3.69). Hybrid layer (HL) formation and resin tags of varying depths were perceived for both adhesive groups. The EDX analysis demonstrated the presence of carbon (C), silica (Si), calcium (Ca), and fluoride (F) for CAFA group. Micro-Raman spectroscopy revealed distinct peaks for CaF2 nano-crystals. The CAFA group presented the greatest DC. The addition of CaF2 nano-crystals in the adhesive caused improved bond µTBS and DC. The incorporation also demonstrated suitable dentin interaction, depicted by appropriate HL and resin tag development.

Influence of Dental Glass Fibers and Orthopedic Mesh on the Failure Loads of Polymethyl Methacrylate Denture Base Resin.

The aim of the present study was to evaluate the fracture loads of polymethyl methacrylate (PMMA) complete denture bases reinforced with glass-fiber mesh and orthopedic casting tape (OCT) in comparison to conventional PMMA dentures under artificial aging. Dental fiberglass framework (Group 1) and OCT (Group 2 and 3) reinforced PMMA acrylic dentures were fabricated on the edentulous ridge. Ten PMMA dentures without reinforcement (Group 4) were included as controls. All specimens were placed in a chewing simulator chamber, and fatigue load was applied. To assess the fracture loads, static loads with a universal testing machine were applied. Fractured specimens in each group were evaluated under a scanning electron microscope. The data were statistically analyzed employing analysis of variance and Tukey post-hoc test. The association of denture weight and thickness on fracture load was assessed using Pearson and Spearman correlations. Dental fiberglass (Group 1) displayed the highest fracture load (692.33 ± 751.41 N), and Group 4 (control) exhibited the lowest fracture loads (281.41 ± 302.51 N). Dentures reinforced with fiberglass mesh framework exhibited intact fractures. In contrast, Group 2 and 3 specimens using OCT demonstrated ditching fractures. It was observed that the thickness and weight of all the reinforced specimens influenced the load required to fracture the dentures (p < 0.001). Denture specimens strengthened with OCT (Groups 2 and 3) exhibited failure loads lower than dental fiberglass (Group 1) specimens but higher than unreinforced controls.

Application of ß-Tricalcium Phosphate in Adhesive Dentin Bonding.

The study aimed at synthesizing ß-tricalcium phosphate (ß-TCP) nanoparticles and comparing the mechanical properties and dentin interaction of two adhesives: experimental adhesive (EA) and EA with 5 wt.% ß-TCP nanoparticles (ß-TCP-5%). These filler nanoparticles were synthesized and then characterized with scanning electron microscopy (SEM) and micro-Raman spectroscopy. The ß-TCP nanoparticles were incorporated in the adhesives to form two groups: gp-1: EA (control) and gp-2: ß-TCP-5%. These adhesives were characterized by SEM, energy-dispersive X-ray (EDX) spectroscopy and were also assessed for their micro-tensile bond strength (µTBS) with (TC) and without thermocycling (NTC). Fourier Transform Infrared (FTIR) spectroscopy was performed to evaluate the degree of conversion (DC) of two adhesives. The ß-TCP filler was seen as irregularly shaped agglomerates on SEM. The micro-Raman spectra revealed characteristic peaks associated with ß-TCP nanoparticles. Both adhesives presented suitable dentin interaction, which was demonstrated by the formation of resin tags of variable depths. The EDX analysis verified the existence of calcium (Ca) and phosphate (P) for the ß-TCP-5% group. The greatest µTBS values were shown by ß-TCP-5% group samples when they were non-thermocycled (NTC) (ß-TCP-5%-NTC: 34.11 ± 3.46) followed by the thermocycled (TC) samples of the same group (ß-TCP-5%-TC: 30.38 ± 3.66), compared with the EA group. Although the DC presented by ß-TCP-5% group was comparable to the EA group, it was still lower. The addition of ß-TCP nanoparticles in the adhesive improved its µTBS and resulted in a suitable dentin interaction, seen in the form of hybrid layer and resin tag formation. Nonetheless, a decreased DC was observed for the ß-TCP-5% adhesive. Future studies probing the effect of different filler concentrations on various properties of the adhesive are warranted.

Efficacy of porphyrin derivative, Chlorhexidine and PDT in the surface disinfection and roughness of Cobalt chromium alloy removable partial dentures.

AIM: The present study aimed to evaluate the effect of different cleansers and photodynamic therapy (PDT) on disinfection of Co/Cr removable partial denture colonized with C. albicans, S.aureus and S.mutans. MATERIAL AND METHODS: Twenty-five Co/Cr removable partial dentures were constructed. and inoculated by American Type Culture Collection (ATCC) of Candida albicans, S.aureus, and S.mutans in an in-vitro setup. Co/Cr removable partial dentures were randomly allocated into five groups and framework was immersed in 15 mL of contaminated culture medium broth. Based on the cleansing method, disinfected dentures in group 1 were cleansed with porphyrin derivative; group 2 was exposed to 0.12% chlorhexidine digluconate; samples in group 3 and group 4 were subjected to sodium perborate enzyme and citric acid respectively. Through a surface analyzer, the surface roughness of Co/Cr and methacrylate resin was measured in 3 different zones in micrometers before and after disinfection. Two-way ANOVA and Tukey's test was used to analyze the data. Levene test was used to assess the normal distribution of data. Significance level p< 0.05 RESULTS: The results of metal roughness displayed that Co/Cr used as an alloy did not exhibit significant difference when exposed to different chemical disinfectants and photosensitizer (p > 0.05). Similarly, surface roughness (Ra) of heat polymerized acrylic resin using cleansers and PDT demonstrated no significant difference. Intergroup comparison showed that, hematoporphyrin derivative displayed comparable cleansing property against S. aureus, C.albicans, and S. mutans compared to to 0.12% CHX digluconate (p>0.05). The intragroup comparison showed hematoporphyrin derivative and CHX were equally effective against all bacteria (p>0.05). CONCLUSION: CHX digluconate and hematoporphyrin derivative demonstrated high antimicrobial activity against S.aureus, S.mutans, and C.albicans with minimum Ra of an acrylic denture and Co/Cr metallic framework.

Influence of TiO2 and ZrO2 Nanoparticles on Adhesive Bond Strength and Viscosity of Dentin Polymer: A Physical and Chemical Evaluation.

The present study aimed to formulate an experimental adhesive (EA) and reinforce it with 5 wt.% titanium dioxide (TiO2) or zirconium oxide (ZrO2) to yield 5% TiO2 and 5% ZrO2 adhesives, respectively, and then analyze the impact of this reinforcement on various mechanical properties of the adhesives. The EA contained a blend of monomers such as bisphenol A glycol dimethacrylate (BisGMA), triethylene glycol dimethacrylate (TEGDMA), 2-hydroxyethyl methacrylate (HEMA), and ethyl 4-dimethylamino benzoate and camphorquinone. The EA included ethyl 4-dimethylamino benzoate and camphorquinone photo-initiators, and diphenyliodonium hexafluorophosphate (DPIHP) was also included to act as an electron initiator. The TiO2 and ZrO2 nanoparticles were incorporated into the EA post-synthesis. To characterize the filler nanoparticles, scanning electron microscopy (SEM) and line-energy dispersive X-ray (EDX) spectroscopy were performed. The adhesives were characterized by analyzing their rheological properties, shear-bond strength (SBS), and interfacial failure types. Further, the resin-dentin interface was also analyzed via SEM. The TiO2 nanoparticles were spherically shaped on the SEM micrographs, while the ZrO2 nanoparticles were seen as non-uniformly shaped agglomerates. The EDX mapping demonstrated the presence of Ti and oxygen for TiO2 and Zr and oxygen for the ZrO2 nanoparticles. Both 5% TiO2 and 5% ZrO2 adhesives revealed decreased viscosity as compared with the EA. The 5% TiO2 adhesive demonstrated higher SBS values for both non-thermocycled (NTC) and thermocycled samples (NTC: 25.35 ± 1.53, TC: 23.89 ± 1.95 MPa), followed by the 5% ZrO2 adhesive group (NTC: 23.10 ± 2.22, TC: 20.72 ± 1.32 MPa). The bulk of the failures (>70%) were of adhesive type in all groups. The SEM analysis of the resin-dentin interface revealed the development of a hybrid layer and resin tags (of variable depth) for the EA and 5% TiO2 groups. However, for the 5% ZrO2 group, the hybrid layer and resin tag establishment appeared compromised. Reinforcement of the EA with TiO2 or ZrO2 caused an increase in the adhesive's SBS (with the 5% TiO2 group demonstrating the highest values) in comparison with the EA (without nanoparticles). However, both nanoparticle-containing adhesives revealed decreased viscosity compared with the EA (without nanoparticles). Further studies investigating the impact of diverse filler concentrations on the properties of adhesives are suggested.

Influencing factors of knowledge, attitude, and practice regarding antibiotic use in children with upper respiratory tract infections in Dubai.

INTRODUCTION: The main leading cause of the upper respiratory tract infections (URTIs) is viral infection. However, parental attitudes often lead to inappropriate prescription of antibiotics contributing to development of antibiotic resistance. The aim of this study is to assess parental knowledge, attitude, and practice (KAP) towards the use of antibiotics in Dubai and to reveal the associated factors. METHOD: Questionnaires were distributed to 500 parents of children who were visiting Al Jalila Children's Specialty Hospital in Dubai. RESULT: A total of 467 subjects agreed to participate in the study. Family income, educational level, nationality, age of the respondents, and numbers of children were identified as factors that significantly associated with inadequate knowledge, negative attitude, or malpractice. CONCLUSION: The study has identified key factors associated with misuse of URTI antibiotics and highlights the importance of targeting those groups with intervention programs and campaigns to increase awareness and decrease misconception of antibiotic use.

Creation and Evaluation of an Endodontic Diagnosis Training Software.

OBJECTIVE: The purpose of the study is to evaluate a user-friendly, comprehensive, fully integrated web- and mobile-based application that was specifically developed to guide learners and help them practice and train in pulpal and periapical diagnosis. METHODS: The software was designed for assistance in the diagnosis of the pulpal and the periapical area. The software contained questions and tests, e.g., presence or absence of signs and symptoms, cold test, percussion, palpation, and radiographic examination that the user must answer to arrive at the final diagnosis. An electronic survey was prepared to evaluate the effectiveness, productivity, and accurateness of the software. The software and the electronic evaluation survey were sent by e-mail to dental students, endodontist, general dentists, and dental interns who study or work in four Saudi dental colleges. Data was analyzed using descriptive statistics. RESULT: A total of 203 questionnaires were completed. Results showed that 29% of the participants were highly satisfied with the software; 40% gave a very good rating about the application satisfaction, while only 2% reported a poor degree of satisfaction with the software. Results also showed that students accurately selected the correct diagnosis but received relatively low diagnostic proficiency scores because they did not request diagnostic data in a pattern similar to experts. CONCLUSION: In conclusion, the software is promising as an effective and efficient tool for teaching and assessing the diagnostic skills of learners.

Corrigendum to "Endodontic and Restorative Treatment Patterns of Pulpally Involved Immature Permanent Posterior Teeth".

[This corrects the article DOI: 10.1155/2018/2178535.].

Knowledge, attitudes, and practice of healthcare workers toward influenza vaccination at Al Jalila Children's Specialty Hospital (AJCH), Dubai, UAE.

BACKGROUND: Influenza viruses usually circulate worldwide annually from the late fall through the early spring. Although most people with influenza recover without sequelae, it can cause serious illness and death, particularly among older adults, very young children, pregnant women, and those with certain chronic medical conditions. AIM OF THE STUDY: To describe the knowledge, attitudes, and practice of Al Jalila Children's Specialty Hospital healthcare workers toward influenza vaccination during 2016-2017 and understand their relative importance in promoting influenza vaccine uptake. METHOD: A validated survey self-administered questionnaire was distributed to healthcare workers at AJCH. A descriptive analysis was performed, including an evaluation of associations using the chi-square test, and an alpha level of 0.05 was considered significant. RESULTS: The questionnaire was distributed to 350 healthcare workers, and 263 (76%) of them completed the survey. Among the responders, 63% answered that they were not vaccinated for seasonal flu in both years, 32% answered that they were vaccinated once, in either 2016 or 2017, and only 5% answered that they were vaccinated during both years.The analysis of results by gender indicates that influenza vaccination uptake in both years (2016 and 2017) was more common in females than in males.Despite a higher educational level, influenza vaccination remained low among physician, nurses, and postgraduate workers. CONCLUSION: The healthcare workers' knowledge of influenza disease does not reflect their knowledge, attitude, and practice toward influenza vaccination. These results highlight the important predictors that must be targeted to promote hospital awareness campaigns to improve their practice and attitude, which could result in increasing seasonal influenza vaccine uptake.

Awareness of Dental Esthetic Standards Among Dental Students and Professionals.

PURPOSE: This study investigated the level of esthetic awareness of dental students and professionals. MATERIAL AND METHODS: Photographs depicting facial and smile features that deviate from universally accepted esthetic standards were presented in a questionnaire. Participants were asked to rate the images and to identify the main discrepant criteria. Eight hundred questionnaires were distributed to dental students, and clinicians. The data were analyzed using chi-square tests, Student's t-test and one-way ANOVA with Tukey's post hoc tests for multiple comparisons. RESULTS: Students had 45.2% correct answers compared to 51.6% for clinicians. Among students, the highest awareness was found among 5th year students, followed by interns, 4th year and 3rd year students. The difference in the percentage of correct answers between clinicians and students overall was significantly higher for some criteria than for others, such as gingival esthetics, lip features, smile zone (incisal plane), facial features, and buccal corridor. Among clinicians, specialists responded correctly more often than did general practitioners in most of the investigated aspects. CONCLUSION: The ability of different group samples to diagnose discrepancies of smile esthetics was refined and enhanced with increased clinical experience and knowledge.

Comparison of perceived pain and patients' satisfaction with traditional local anesthesia and single tooth anesthesia: A randomized clinical trial.

BACKGROUND: Contemporary innovations in the area of local anesthesia have attempted to provide an absolutely pain free experience for patients. Since the introduction of Computer-Controlled Local Anesthetic Delivery Systems to dentistry, many studies have compared its efficacy and safety to conventional anesthesia. However, very few studies have compared single tooth anesthesia (STA) and traditional local anesthesia. AIM: To compare pain rating, changes in blood pressure, and heart rate during the local anesthetic injection. The secondary objectives were to measure the patients' level of satisfaction and the differences in anesthetic efficiency between the STA system and traditional local infiltration. METHODS: A randomized controlled trial was conducted and a total of 80 patients with dental restorative needs were enrolled for the study. The patients were evaluated for their general physical status and oral clinical findings before enrollment. Information regarding perceived pain, changes in heart rate and blood pressure, and patients' satisfaction was collected using an electronic data form and was analyzed using paired and unpaired t-tests. RESULTS: No significant difference was noted in perceived pain (P = 0.59) and systolic blood pressure (P = 0.09) during anesthetic injection using both traditional and STA techniques. STA patients had a significantly higher heart rate during anesthesia, although a statistically significant difference was noted among the traditional anesthesia and the STA groups even before anesthesia. During the restorative procedure, less pain was perceived by STA patients on the Wong-Baker FACES pain scale, which was statistically significant (P < 0.001). Analyses of post-procedure patient responses showed that STA patients had a significantly better treatment experience and preferred to have the same method of injection in the future (P = 0.04). CONCLUSION: STA system can provide less painful and more comfortable restorative treatment procedures in comparison to the traditional infiltration technique.

Esthetic self-perception of smiles among a group of dental students.

OBJECTIVE: The aim of this cross-sectional observational study was to assess undergraduate dental students' esthetic self-perception of their own smiles. MATERIALS AND METHODS: A questionnaire consisting of two parts was distributed to 1400 dental students at all levels of study in the city of Riyadh. The first part was intended to measure students' self-perception of and satisfaction with their own smiles. In the second part, students were asked to rate the importance of specific features of an attractive face on a 100-mm visual analog scale (VAS) bar. RESULTS: The overall mean satisfaction index was 9.32. The participants in the intern group were the most satisfied with their smiles. The female students showed more dissatisfaction than the male students with their smiles. Among the facial features important to facial attractiveness, teeth scored the highest (86.54) on the VAS, and the rating of this feature increased in relation to academic progress. The ratings of female participants were higher than male participants for most facial features. CONCLUSION: Although the results indicated an overall negative esthetic self-perception among the dental students, their self-reported satisfaction with their appearance increased as they progressed academically.