A biophysical approach to study the impact of muscle relaxant drug tizanidine on stability and activity of serum albumins.

The binding affinity of a drug with carrier proteins plays a major role in the distribution and administration of the drug within the body. Tizanidine (TND) is a muscle relaxant having antispasmodic and antispastic effects. Herein, we have studied the effect of tizanidine on serum albumins by spectroscopic techniques, such as absorption spectroscopic analysis, steady, state fluorescence, synchronous fluorescence, circular dichroism, and molecular docking. The binding constant and number of binding sites of TND with serum proteins were determined by means of fluorescence data. The thermodynamic parameters, like Gibbs' free energy (ΔG), enthalpy change (ΔH), and entropy change (ΔS), revealed that the complex formation is spontaneous, exothermic, and entropy driven. Further, synchronous spectroscopy revealed the involvement of Trp (amino acid) responsible for quenching of intensity in fluorescence in serum albumins in presence of TND. Circular dichroism results suggest that more folded secondary structure of proteins. In BSA the presence of 20 µM concentration of TND was able to gain most of its helical content. Similarly, in HSA the presence of 40 µM concentration of TND has been able to gain more helical content. Molecular docking and molecular dynamic simulation further confirm the binding of TND with serum albumins, thus validating our experimental results.

Ultra-selective high-flux membranes from directly synthesized zeolite nanosheets.

A zeolite with structure type MFI is an aluminosilicate or silicate material that has a three-dimensionally connected pore network, which enables molecular recognition in the size range 0.5-0.6 nm. These micropore dimensions are relevant for many valuable chemical intermediates, and therefore MFI-type zeolites are widely used in the chemical industry as selective catalysts or adsorbents. As with all zeolites, strategies to tailor them for specific applications include controlling their crystal size and shape. Nanometre-thick MFI crystals (nanosheets) have been introduced in pillared and self-pillared (intergrown) architectures, offering improved mass-transfer characteristics for certain adsorption and catalysis applications. Moreover, single (non-intergrown and non-layered) nanosheets have been used to prepare thin membranes that could be used to improve the energy efficiency of separation processes. However, until now, single MFI nanosheets have been prepared using a multi-step approach based on the exfoliation of layered MFI, followed by centrifugation to remove non-exfoliated particles. This top-down method is time-consuming, costly and low-yield and it produces fragmented nanosheets with submicrometre lateral dimensions. Alternatively, direct (bottom-up) synthesis could produce high-aspect-ratio zeolite nanosheets, with improved yield and at lower cost. Here we use a nanocrystal-seeded growth method triggered by a single rotational intergrowth to synthesize high-aspect-ratio MFI nanosheets with a thickness of 5 nanometres (2.5 unit cells). These high-aspect-ratio nanosheets allow the fabrication of thin and defect-free coatings that effectively cover porous substrates. These coatings can be intergrown to produce high-flux and ultra-selective MFI membranes that compare favourably with other MFI membranes prepared from existing MFI materials (such as exfoliated nanosheets or nanocrystals).

Few-Unit-Cell MFI Zeolite Synthesized using a Simple Di-quaternary Ammonium Structure-Directing Agent.

Synthesis of a pentasil-type zeolite with ultra-small few-unit-cell crystalline domains, which we call FDP (few-unit-cell crystalline domain pentasil), is reported. FDP is made using bis-1,5(tributyl ammonium) pentamethylene cations as structure directing agent (SDA). This di-quaternary ammonium SDA combines butyl ammonium, in place of the one commonly used for MFI synthesis, propyl ammonium, and a five-carbon nitrogen-connecting chain, in place of the six-carbon connecting chain SDAs that are known to fit well within the MFI pores. X-ray diffraction analysis and electron microscopy imaging of FDP indicate ca. 10 nm crystalline domains organized in hierarchical micro-/meso-porous aggregates exhibiting mesoscopic order with an aggregate particle size up to ca. 5 µm. Al and Sn can be incorporated into the FDP zeolite framework to produce active and selective methanol-to-hydrocarbon and glucose isomerization catalysts, respectively.

Supported Zeolite Beta Layers via an Organic Template-Free Preparation Route.

Layers of high silica zeolites, synthesized with an organic structure directing agent (OSDA) and grown onto porous support structures, frequently suffer from the thermal stress during the removal of OSDA via the calcination process. The different thermal expansion coefficients of the zeolite and the support material, especially when stainless steel is used as a support, causes enormous tension resulting in defect formation in the zeolite layer. However, the calcination is an easy procedure to decompose the OSDA in the pore system of the zeolite. Recently, methods to synthesize zeolite beta without the use of an organic structure directing agent have been described. In the present study, a seed-directed synthesis is used to prepare OSDA-free zeolite beta layers on stainless steel supports via an in situ preparation route. For the application as membrane, a porous stainless steel support has been chosen. The beta/stainless steel composites are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). To prove its possible application as a membrane, the beta/stainless steel composites were also tested by single gas permeances of H2, He, CO2, N2, and CH4.

Nanoscale Control of Homoepitaxial Growth on a Two-Dimensional Zeolite.

Nanoscale crystal growth control is crucial for tailoring two-dimensional (2D) zeolites (crystallites with thickness less than two unit cells) and thicker zeolite nanosheets for applications in separation membranes and as hierarchical catalysts. However, methods to control zeolite crystal growth with nanometer precision are still in their infancy. Herein, we report solution-based growth conditions leading to anisotropic epitaxial growth of 2D zeolites with rates as low as few nanometers per day. Contributions from misoriented surface nucleation and rotational intergrowths are eliminated. Growth monitoring at the single-unit-cell level reveals novel nanoscale crystal-growth phenomena associated with the lateral size and surface curvature of 2D zeolites.

Initial Carbon-Carbon Bond Formation during the Early Stages of the Methanol-to-Olefin Process Proven by Zeolite-Trapped Acetate and Methyl Acetate.

Methanol-to-olefin (MTO) catalysis is a very active field of research because there is a wide variety of sometimes conflicting mechanistic proposals. An example is the ongoing discussion on the initial C-C bond formation from methanol during the induction period of the MTO process. By employing a combination of solid-state NMR spectroscopy with UV/Vis diffuse reflectance spectroscopy and mass spectrometry on an active H-SAPO-34 catalyst, we provide spectroscopic evidence for the formation of surface acetate and methyl acetate, as well as dimethoxymethane during the MTO process. As a consequence, new insights in the formation of the first C-C bond are provided, suggesting a direct mechanism may be operative, at least in the early stages of the MTO reaction.

Open-Pore Two-Dimensional MFI Zeolite Nanosheets for the Fabrication of Hydrocarbon-Isomer-Selective Membranes on Porous Polymer Supports.

Two-dimensional zeolite nanosheets that do not contain any organic structure-directing agents were prepared from a multilamellar MFI (ML-MFI) zeolite. ML-MFI was first exfoliated by melt compounding and then detemplated by treatment with a mixture of H2 SO4 and H2 O2 (piranha solution). The obtained OSDA-free MFI nanosheets disperse well in water and can be used for coating applications. Deposits made on porous polybenzimidazole (PBI) supports by simple filtration of these suspensions exhibit an n-butane/isobutane selectivity of 5.4, with an n-butane permeance of 3.5×10(-7)  mol m(-2) s(-1) Pa(-1) (ca. 1000 GPU).

Single-Walled TiO2 Nanotubes: Enhanced Carrier-Transport Properties by TiCl4 Treatment.

In the present work we report significant enhancement of the photoelectrochemical properties of self- organized TiO2 nanotubes by a combined "de-coring" of classic nanotubes followed by an appropiate TiCl4 treatment. We show that, except for the expected particle decoration, a key effect of the TiCl4 treatment is that the electron transport characteristics in TiO2 nanotubes can be drastically improved, for example, we observe an enhancement of up to 70 % in electron-transport times.

Stepwise construction of extra-large heterometallic calixarene-based cages.

Utilizing presynthesized large Na2Ni12Ln2 clusters (Ln = Dy and Tb) supported by calixarene as molecular building blocks (MBBs), we have obtained a series of cationic trigonal prismatic heterometallic organic nanocages (HMONCs) with tunable sizes through a stepwise method. Specially, in each structure of the HMONCs, three linear dicarboxylate linkers substitute the peripheral coordinated acetate ligands of two Na2Ni12Ln2 clusters to form an unprecedented Na4Ni24Ln4 HMONC through a M2L3 condensation. Moreover, magnetic study reveals that the Na2Ni12Dy2 core retains its slow magnetic relaxation behavior. Gas sorption behaviors of these HMONCs were also studied. To the best of our knowledge, these HMONCs built from large heterotrimetallic Na2Ni12Ln2 MBBs, which are based on smaller Ni4-calix ones, have not been reported in any other cages to date. In addition, this research also provides a new strategy for the design and construction of HMONCs with predictable structures and functional properties.

Multifunctional Nanobiocomposite of Poly[(butylene succinate)-co-adipate] and Clay.

The processing and characterization of multifunctional nanobiocomposite of biodegradable poly[(butylene succinate)-co-adipate] (PBSA) and organically modified synthetic fluorine mica (OSFM) are reported. The nanobiocomposite of PBSA with OSFM was prepared using melt- blending, and the structure and morphology of the nanocomposite were characterized using X-ray diffraction and transmission electron microscopy. The mechanical and material properties measurements showed the concurrent improvement in temperature dependence storage modulus, tensile properties, gas barrier, and thermal stability of neat PBSA after nanocomposite formation. Such improved inherent properties along with the environmentally-friendly feature are expected to widen the use of PBSA for short-term food-packaging applications.

Biosynthesis of silver nanoparticles and its antibacterial and antifungal activities towards Gram-positive, Gram-negative bacterial strains and different species of Candida fungus.

Biomimetic and economic method for the synthesis of silver nanoparticles (AgNPs) with controlled size has been reported in presence of shape-directing cetlytrimethylammonium bromide (CTAB). Biochemical reduction of Ag(+) ions in micellar solution with an aqueous lemon extract produced spherical and polyhedral AgNPs with size ranging from 15 to 30 nm. The influence of [CTAB] and [lemon extract] on the size of particles, fraction of metallic silver and their antimicrobial properties is discussed. The AgNPs were evaluated for their antimicrobial activities (antibacterial and antifungal) against different pathogenic organisms. For this purpose, AgNPs were tested against two model bacteria (Staphylococcus aureus (MTCC3160) and Escherichia coli (MTCC405)) and three species of Candida fungus (Candida albicans (ATCC90028), Candida glabrata (ATCC90030) and Candida tropicalis (ATCC750). AgNPs were found to be highly toxic towards both bacteria. The inhibition action was due to the structural changes in the protein cell wall.

Green synthesis of biogenic silver nanomaterials using Raphanus sativus extract, effects of stabilizers on the morphology, and their antimicrobial activities.

The present study explores the reducing and capping potentials of aqueous Raphanus sativus root extract for the synthesis of silver nanomaterials for the first time in the absence and presence of two stabilizers, namely, water-soluble starch and cetyltrimethylammonium bromide (CTAB). The surface properties of silver nanoparticles (AgNPs) were determined by dynamic light scattering (DLS), transmission electron microscopy (TEM), energy dispersion X-ray spectroscopy (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) techniques. The mean size of AgNPs, ranging from 3.2 to 6.0 nm, could be facilely controlled by merely varying the initial [extract], [CTAB], [starch], and [Ag(+)] ions. The agglomeration number, average number of silver atoms per nanoparticle, and changes in the fermi potentials were calculated and discussed. The AgNPs were evaluated for their antimicrobial activities against different pathogenic organisms. The inhibition action was due to the structural changes in the protein cell wall.

2D Zeolite Coatings: Langmuir-Schaefer Deposition of 3†nm Thick MFI Zeolite Nanosheets.

Stable suspensions of zeolite nanosheets (3 nm thick MFI layers) were prepared in ethanol following acid treatment, which partially removed the associated organic structure-directing agent. Nanosheets from these suspensions could then be dispersed at the air-water interface and transferred to silicon wafers using Langmuir-Schaefer deposition. Using layer-by-layer deposition, control on coating thickness was demonstrated. In-plane X-ray diffraction (XRD) revealed that the deposited nanosheets contract upon calcination similar to bulk MFI crystals. Different methods for secondary growth resulted in preferentially oriented thin films of MFI, which had sub-12-nm thickness in certain cases. Upon calcination, there was no contraction detectable by in-plane XRD, indicating well-intergrown MFI films that are strongly attached to the substrate.

Nanostructured Mg-Al hydrotalcite as catalyst for fine chemical synthesis.

This paper reviews the recent research of nanostructured Mg-Al hydrotalcite (Mg-Al HT) and its application as an efficient solid base catalyst for the synthesis of fine chemicals. Mg-Al HT has many beneficial features, such as low cost, selectivity, catalytic properties, and wide range of preparation and modification methods. They hold promise for providing sought-after, environmentally friendly technologies for the 21st century. Replacement of currently used homogeneous alkaline bases for the synthesis of fine chemicals by a solid catalyst can result in catalyst re-use and waste stream reduction. We introduce briefly the structure, properties and characterization of the nanostructured Mg-Al HT. The efficacy and benign applications of Mg-Al HT as an alternative solid base to homogenous catalysts in the synthesis of fine chemicals are then reviewed. The challenges for the future applications of Mg-Al HT in the synthesis of fine chemicals in terms of green protocol processes are discussed.

Surfactant-assisted bio-conjugated synthesis of silver nanoparticles (AgNPs).

A simple one-spot synthetic route for the production of Ag-nanoparticles using aqueous extract of citrus lemon is being reported in presence of shape-directing cetyltrimethylammonium bromide (CTAB). To our knowledge, this is the first report where the biomolecules form a layer around a group of the Ag-nanoparticles in which the inner layer is bound to the AgNPs surface via the hydroxyl groups of citric acid. The appearance of a sharp surface plasmon resonance band in the UV-visible region might be due to the formation of spherical Ag-nanoparticles. Agglomeration number (N Ag), the average number of silver atoms per nanoparticle (N), molar concentrations of nanoparticle (C) in solution, extinction coefficient (ε) and increase in the Fermi energy (ΔE F) were calculated using Mie theory and discussed. Interestingly, reaction mixture became turbid at higher [CTAB] due to the uncontrolled growth of Ag-nanoparticles. The transmission electron microscopic images of nanoparticles, recorded at different magnifications.

Microwave assisted synthesis, spectral and antifungal studies of 2-phenyl-N,N'-bis(pyridin-4-ylcarbonyl)butanediamide ligand and its metal complexes.

2-Phenyl-N,N'-bis(pyridin-4-ylcarbonyl)butanediamide ligand with a series of transition metal complexes has been synthesized via two routes: microwave irradiation and conventional heating method. Microwave irritation method happened to be the efficient and versatile route for the synthesis of these metal complexes. These complexes were found to have the general composition M(L)Cl2/M(L)(CH3COO)2 (where M = Cu(II), Co(II), Ni(II), and L = ligand). Different physical and spectroscopic techniques were used to investigate the structural features of the synthesized compounds, which supported an octahedral geometry for these complexes. In vitro antifungal activity of the ligand and its metal complexes revealed that the metal complexes are highly active compared to the standard drug. Metal complexes showed enhanced activity compared to the ligand, which is an important step towards the designing of antifungal drug candidates.

Metal-free Borylation of α-Naphthamides and Phenylacetic Acid Drug.

Site-selective C-H borylation is an important strategy for constructing molecular diversity in arenes and heteroarenes. Although transition-metal-catalyzed borylation is well explored, developing metal-free strategies remains scarce. Herein, we developed a straightforward approach for BBr3-mediated selective C-H borylation of naphthamide and phenyl acetamide derivatives under metal-free conditions. This methodology appears to be economical and cost-effective. Successful borylation of drug molecules such as ibuprofen and indoprofen demonstrates the versatility and utility of this metal-free borylation. An exclusive monoselectivity was observed without a trace of diboration. Despite the possibility of forming a 5-membered boronated intermediate at the ortho-position, the selectively 6-membered intermediate paved the way for the formation of the peri-product, which was further supported by detailed computational investigation.

Single-particle spectroscopy on large SAPO-34 crystals at work: methanol-to-olefin versus ethanol-to-olefin processes.

The formation of hydrocarbon pool (HCP) species during methanol-to-olefin (MTO) and ethanol-to-olefin (ETO) processes have been studied on individual micron-sized SAPO-34 crystals with a combination of in situ UV/Vis, confocal fluorescence, and synchrotron-based IR microspectroscopic techniques. With in situ UV/Vis microspectroscopy, the intensity changes of the λ=400 nm absorption band, ascribed to polyalkylated benzene (PAB) carbocations, have been monitored and fitted with a first-order kinetics at low reaction temperatures. The calculated activation energy (Ea ) for MTO, approximately 98 kJ mol(-1) , shows a strong correlation with the theoretical values for the methylation of aromatics. This provides evidence that methylation reactions are the rate-determining steps for the formation of PAB. In contrast for ETO, the Ea value is approximately 60 kJ mol(-1) , which is comparable to the Ea values for the condensation of light olefins into aromatics. Confocal fluorescence microscopy demonstrates that during MTO the formation of the initial HCP species are concentrated in the outer rim of the SAPO-34 crystal when the reaction temperature is at 600 K or lower, whereas larger HCP species are gradually formed inwards the crystal at higher temperatures. In the case of ETO, the observed egg-white distribution of HCP at 509 K suggests that the ETO process is kinetically controlled, whereas the square-shaped HCP distribution at 650 K is indicative of a diffusion-controlled process. Finally, synchrotron-based IR microspectroscopy revealed a higher degree of alkylation for aromatics for MTO as compared to ETO, whereas high reaction temperatures favor dealkylation processes for both the MTO and ETO processes.

Photophysical studies of europium coordination polymers based on a tetracarboxylate ligand.

Reaction of europium sulfate octahydrate with p-terphenyl-3,3″,5,5″-tetracarboxylic acid (H4ptptc) in a mixed solvent system has afforded three new coordination polymers formulated as {[Eu(ptptc)0.75(H2O)2]·0.5DMF·1.5H2O}n (1), {[Me2H2N]2 [Eu2(ptptc)2(H2O)(DMF)]·1.5DMF·7H2O}n (2), and {[Eu(Hptptc)(H2O)4]·0.5DMF·H2O}n (3). Complex 1 exhibits a three-dimensional (3D) metal-organic framework based on {Eu2(µ2-COO)2(COO)4}n chains, complex 2 shows a 3D metal-organic framework constructed by [Eu2(µ2-COO)2(COO)6](2-) dimetallic subunits, and complex 3 features a 2D layer architecture assembling to 3D framework through π···π interactions. All complexes exhibit the characteristic red luminescence of Eu(III) ion. The triplet state of ligand H4ptptc matches well with the emission level of Eu(III) ion, which allows the preparation of new optical materials with enhanced luminescence properties. The luminescence properties of these complexes are further studied in terms of their emission quantum yields, emission lifetimes, and the radiative/nonradiative rates.